Rug Doctor spray button is not working, troubleshooting

[@waynewellens]

Thanks for the help! We are getting ready for a party and had this very issue. Your solution did the trick in 10 seconds and we were good to go.

[@orangemicro]

This worked! This is located on the back, you do not have to remove the white container to see it. It's basically touching the instructions that you read upside down if that makes sense.

[@nataliediamond3367]

Thank you so much this has really helped me I struggled and stressed all day trying to see the problem you have really made my day thank you so much really appreciate it:)

[@nataliewilliams3071]

try cleaning the filter in the base tank, unscrew the filter, remove, put your hand down the left side and find the water tube on the end of the tube is a mesh filter, mine was clogged after leaving solution in the machine, water went gunky and clogged take the filter off and rinse it hopefully this works for you

[@jrgeorge3077]

thanks for the guide, but i am still having issues. i aint getting enough spray from my machine. is there something else i can do ?

[@jasonhook8902]

This was the first thing I did before I came on here trying to find something useful. The sound changes so I think the pump is working. Going to check the discharge port.

[@nataliewilliams3071]

there is a switch at the back of mine with a quick dry option or rapid wash (this means more water) try that if not something must be blocked in the filters or not connected properly... mine was only spitting water from the hand tool and nothing at all from the base, I watched the videos and followed the steps then decided to try the base tank and found slimy sludge around the water pipe I pulled it up to reveal a mesh cover, I took it off rinsed and now its fine...

[@bradybedwell5158]

Witch rug doctor do you have I have never seen quick dry or rapid wash want to buy or rent one that has it

[@rosemariebrown6743]

Ok… and if it doesn’t??

[@raneedempsey9183]

My red button popped off. is there a way to repair it

[@pabrahan]

Fixed my problem! Thanks!

[@MichaelSullivanPhoto1985]

Thank you!