Ferris ISX 800 61 inch deck zero turn Review

[@justinbryan595]

I just bought this exact model, without doing any research because of the deal I got. But, how nice it is to see this video... I am happy I ended up getting this

[@mm-xk7pg]

Great review! Thanks for posting this. I cant wait till I'm able to buy that mower!!

[@dandolen1300]

Just bought a 800 ferris. Let me tell you, best mower I have ever owned. Rides awesome. Would recommend a ferris if you are looking for a zero turn. Great mower.

[@rell5260]

Do you recommend this for 1 acre? I prefer the speed, agility and time saving aspect and I think this would last me a lifetime.

[@RunBikeMike]

You could get 1 acre done in no time. You could go with the 52 and still get it done in link 30 minutes

[@rell5260]

@@RunBikeMike Thank you. I was looking into that as well but the wider stripes would look nice. I have a 54" tractor (I know that I am not talking apples to apples) but already having 54, I felt 60" good.

[@ryangsxr1300]

Just bought a isx800 today

[@dandolen1300]

@@ryangsxr1300 you will like it. Congratulations

[@SilverGleaner]

Same as my Simplicity Citation XT I think. Great mower. I opted for the suspension seat when I bought it last June.

[@Sgt_Plague]

I like how you had 3 shots I think of the front suspension working away 👍🏼

[@JR-es5zl]

Thanks for an informative video with great music!

[@paulettesarro9903]

My FERRIS IS 12 yrs old… I mow 6 acres with it weekly.. small oil leak at seal.. that’s only problem I’ve had.. great mower!!! Wish they made a front cut

[@Fultonfalcons86]

I love my 3300 but that new dual wheel cub cadet with gps is sweet

[@RunBikeMike]

If you like this video please subscribe to my channel. Help me get to 1000 subs. Thanks for watching.

[@davedavid7523]

Thanks for the great review. I did notice, however, that you still have the bolts in your front spindles? I just bought mine and have yet to use it and according to my owners manual these bolts should be removed and replaced with grease zerks. WHY they didn't do that at the factory is a mystery? But you might want to look into that. I plan on having mine for many years and I'm a bug about maintenance.

[@RunBikeMike]

You are correct that a grease fitting goes there. I am not sure why but they don’t want you to keep it installed. I double checked and in my manual it calls to install the fitting, then grease it then uninstall and reinstall the bolt. I would love to know why they don’t want one installed all the time. I will do some more research on this. Maybe because they only recommend greasing it annually.

[@stepsidelandscapinglawnsol3093]

This is so you don't break the zerk fitting when mowing. Its in a position where you can bump into things. Also, you don't have to service that fitting much due to its nature. Doesn't overheat

[@784rick]

Great review I have the same model only have 25 hrs maybe do you ever notice a unleveled cut ? like the deck might not be leveled I took mine back to where I bought it they went over it an said they could not find anything wrong I even took pics an sent to Ferris they called me but nothing ever came of it I noticed sometimes when I’m mowing the one chan on the right side will have slack in it. Maybe it’s just me being picky or not use to it’s mowing quality my last tractor was a cub with a 48” deck an that cut grass great Any info would be appreciated thanks

[@RunBikeMike]

Thanks!!! Make sure the back of the deck is 1/4 inch higher than the front of the deck. This will allow air flow to pull the grass up and push the grass out. Also make sure all grease points are greased and oils points are oiled on the deck. The chain having slack seems odd but maybe not. I will have to watch mine when I mow again. You should checkout my other videos I have made for my mower. I made a chute blocker which I will have part 3 of that coming up, installed a light, and a hitch.

[@784rick]

Thanks for the quick response I will check that out this weekend. I’m thinking about getting one of those shoot blockers I switched mine over to mulching an bought the kit got tired of grass blowing out an ending up in flower bed I will check out that video. Also thinking about one of the rollers you can get or make to give the grass the lay down look t mounts to the back of the deck once again thanks

[@RunBikeMike]

Yeah a roller would be awesome. Put down some nice stripes.

[@superquig7068]

Perhaps check your air pressure. I’ve seen a variance in air pressure between tires do this.

[@784rick]

I did an an there was some difference I corrected same problem in the end I spent the day measuring the front an back of the deck an set it 1/4” difference from back to front now it mowes great

[@douglaspost5097]

I'm looking at literature from Ferris right now and that has the weight of the isx800 as being 1197lbs with a 61"deck and 1119lbs with the 52" deck.

[@kdw75]

I went to buy the ISX2200, but they couldn't get it in for almost 2 weeks. I ended up getting the ISX800 Kawasaki 61" delivered the next day. After a single mowing, I must say that I am happy with it, but the traction seems lacking compared to my old Woods Mow n' Machine, which is a 6 wheel setup and a little heavier. I am thinking I need to let some air out of the tires.

[@paulettesarro9903]

Would suggest ATV tires

[@chadbrown7648]

Just got mine today traded in my is700 for it can’t wait to try it out I got the vanguard motor

[@RunBikeMike]

Sweet was that you that posted on the FB Ferris group today?

[@whiteoutram0516]

@@RunBikeMike yep lol

[@RunBikeMike]

Awesome you got the suspension seat. That looked great. Enjoy bud

[@whiteoutram0516]

@@RunBikeMike thanks man gonna try it out tomorrow

[@jeffweber8244]

I’m weighing buying one of these vs getting a Scag Patriot. Same dealer carries both here. Ferris is more expensive, heavier, and maybe smoother ride. Scag has more users around here, and possibly more accessories available. Any thoughts?

[@RunBikeMike]

I personally haven’t used a Scag. But I know they are good. I will say this if you mow for over an hour a week get the Ferris. The suspension is so worth it. It has saved my back. I feel great after several hours of mowing with it. Check out some of my other videos to see some of the things I have added to it. I really love that mower.

[@jeffweber8244]

@@RunBikeMike Thanks! I've had the ISX800 for a month now and I'm very happy with it. Got it for a good price and great financing terms. Getting ready to do a break-in oil change soon. Mine has the Vanguard engine.

[@grasshogsllc8734]

Great review 👍🏻

[@RunBikeMike]

Thanks!!

[@toddbenfield6546]

How’s the Amazon suspension seat? The one I was looking at is the frame, and put your seat on it. Lot cheaper than a factory suspension seat.

[@RunBikeMike]

It works really well. I am sure it is not as good as factory but like you said some icy cheaper.

[@captainpegs07]

Good review! Realistically, what acre/hr are you getting? I'm debating this one or going up to get a 6ft deck for 3 acres.

[@scottneill8646]

Best mowers made 👍😎

[@97JoMiller]

Do you have a link to that seat attachment? I have the is700z and my yard is quite rough because it was farm land as well and if the price is right, I'd love to get that seat attachment

[@RunBikeMike]

Here is the one I purchased: amzn.to/3dyRJQI

[@97JoMiller]

@@RunBikeMikereading the reviews, people are saying the safety switch had to be removed, did you experience this?

[@RunBikeMike]

No you just have to route it correctly. When I bought it people were talking about that same issue. I found that if you take your time you can route it so it won’t be too short. After a season and a half it is still working just fine. Although there are time I wish the seat switch didn’t work 😂

[@vizznizz]

I looked through all of your videos just hoping you had made a video of the seat installation! I’m wanting to add one to mine asap! Thanks for the review

[@lunchtimetechtalk2866]

Sick mower dude

[@GrabberBluey]

Can you add link for suspension seat frame?

[@RunBikeMike]

Here is the one I have. Looks like they have it for as low as $144 now or new for $188. Rotary 12530 Seat Suspension Only for Riding Mowers and Tractors www.amazon.com/dp/B0081H3JH0/ref=cm_sw_r_cp_api_i_RwtbEb2VEYVQR

[@RunBikeMike]

Here is the one I have. Looks like they have it for as low as $144 now or new for $188. Rotary 12530 Seat Suspension Only for Riding Mowers and Tractors www.amazon.com/dp/B0081H3JH0/ref=cm_sw_r_cp_api_i_RwtbEb2VEYVQR

[@JohnJohn-bp5ci]

Very nice mower. How many acres do you mow?

[@RunBikeMike]

I mow around 6 each week

[@AllToolReviews]

Nice work

[@michaelbailey8543]

Thanks for the review! I am picking up my 61” ISX800 with Briggs (non EFI) this week and can’t wait. Your video made me feel more confident in my decision, and I’m curious how the factory seat is going to work out. I have 5 acres that are rough and bumpy so I’m not sure if I’ll have to upgrade yet. What was the recommended schedule for changing the oil the first time?

[@RunBikeMike]

I really like the factory seat. I added suspension to it. As for the 1st one I did mine at 10 hours. Congrats and I am sure you will love it. Make sure the deck is 1/4 inch higher in the back then the front. Sometimes when you buy them they don’t set them correctly. This is the recommendation from Ferris and makes your cut so much nicer.

[@michaelbailey8543]

RunBikeMike is that a hard adjustment to make, or should I just ask them to do it before I get it?

[@RunBikeMike]

Michael Bailey I would just ask the dealer to make sure. They have the tools and can adjust it much faster there.

[@art7art19]

Still like it? Any issues?

[@RunBikeMike]

I love it. I have around 30 hours on it now. No problems so far.

[@SilverGleaner]

@@RunBikeMike My Citation had one problem, at 6 hours the seat belt failed to recoil and it dropped into the left hydro fan and belt but the dealer replaced everything very quickly. I'm going to put some kind of guard there so if it fails again it won't wreck the fan, pulley and hydro hose.

[@Gr8Layks]

2:57 Looks like there's only a $2000 price difference between this and the IS2100 this year. www.ferrismowers.com/na/en_us/products/zero-turn-mowers.html

[@RunBikeMike]

Nice I would guess because the 2100 is an older model now. The 2200 is the replacement for the 2100. But also you might check the EFI versions of both. The price difference might be larger.

[@10acresandlearning53]

👍🏻

[@kimsac1]

❤️👍😊👍

[@randyprevette3903]

Price? My Bobcat procat 7000 was $12500. Randys Lawn Care

[@RunBikeMike]

Depending on the one you get it should come in around $7000 - $9000.

[@randyprevette3903]

Not a procat 7000 buddy. It's the wider frame Parker wheel motors etc. List for closer to 14k

[@RunBikeMike]

I am not familiar with the procat. The $7-$9k price is for the Ferris ISX800.

[@flyingdog1498]

I have had both the Kawasaki and the Briggs on the same 60" mower, the Briggs beats the hell out of the Kawasaki.

[@RunBikeMike]

Oh that is great to hear. I have always wondered what the Kawasaki was really like.

[@the_proffit76]

Thank you for that information. I was debating between the Briggs & Kawasaki. My dealer is saying that the Briggs is stronger and the one he suggests.

[@skliros9235]

I agree