Tap to unmute

Running Some Hard Laps Proboat UL-19 Hot Hot Bullets

  Рет қаралды 2,121

IRONCLAD RC

IRONCLAD RC

Күн бұрын

Пікірлер: 53
@barthutchison4207
@barthutchison4207 2 жыл бұрын
6k subscribers. Way to go!!
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
Thanks brother
@55steviegreene
@55steviegreene 2 жыл бұрын
My favorite looking boat badasss
@philipsparrow637
@philipsparrow637 2 жыл бұрын
Hey Big B. I had a Popeye several years ago. What an absolutely brilliant hull. After a few weeks I junked the stock motor, probably nothing wrong with it as such but I went Leopard power still on 4s. For our local pond it was plenty quick enough (50 ish) but such a blast to drive. Mines was the yellow and blue, but I do quite like the green. Would I have another one.... absolutely!!
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
That's good to know brother thanks for the input, yea man the yellow one definitely looks sweet. Thanks brother
@SteveLane61
@SteveLane61 2 жыл бұрын
You're not alone with UL-19 running problems Big B. I've had all sorts of cooling (or lack of) issues and burned out a motor when giving her full trigger! You're bang on the money when you say you need to be on your 'A game' with this boat. Getting everything just right is painstaking work, but the rewards when she runs right are immense. A beautiful hydro for sure, but challenging to get right.
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
Extremely challenging I'm thinking about going larger with the connectors all the way around and lower kv
@Dr_Jet
@Dr_Jet 2 жыл бұрын
I certainly enjoy my daily morning dose of Boat Gang!! As you are well aware, I like to concentrate on the smaller boats for a number of reasons, but I must admit, that TFL Popeye in yellow looks tempting...... Or maybe even the all carbon fiber hull.. ($$$$$). 😲 Maybe it's time to go big or go home......
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
Yea I'd like to see that Doc,
@Dr_Jet
@Dr_Jet 2 жыл бұрын
@@IRONCLADRC Once I finish all the other projects I have in the wings (Single-Step Hydro Challenge, Micro Drifter twin, MHZ Miss Madison x 2) I may consider it. I kinda wanted to get my old LSH hydro (Campbell 1/12 Shovelnose) running again, but it could wait I suppose. We could do parallel builds on opposite sides of the continent.
@mccaffery3608
@mccaffery3608 2 жыл бұрын
i have wanted this boat for so long and i have finally got it and it should be in the store soon. so glad you could show me how it kinda works and what im getting myself into. also very new to ur yt and right after this video i subbed lol
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
Thanks brother welcomethe the boat gang. . I definitely recommend running the UL-19 on 4s in its stock form
@avalanche15301
@avalanche15301 2 жыл бұрын
Lol yup, anytime I have a flex shaft slip, I expect to see smoke and damage on both the collet and flex shaft. These ul19s are solid performers when dialed in.
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
Yeah, man, especially with the plastic stuffing tune retainers,
@avalanche15301
@avalanche15301 2 жыл бұрын
@@IRONCLADRC you could always do a carbon inlay with carbon mounts and carbon bottom sponson pads. It's makes a huge difference. A guy locally did the one I own then blue printed it and it cuts the corners at wot on glass pretty gpod. Also I think I run the strut 4 mm up from bottom and level if I recall. Hope you get her dialed in!
@FLSharkdiver
@FLSharkdiver 2 жыл бұрын
Yikes, almost did the same thing with my one of my Miss Geico motors.. It was not tighten down enough at the factory and my motor must have moved on me and I caught it before it got super hot.. I always check my 2.5mm hex nuts and make sure they are tight when I do my greassing before all runs...I have seen this happen way to many times.. ❤‍🔥❤‍🔥❤‍🔥
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
No harm, no foul. Just a little smoke! 👊 BG4L
@nealstarling5422
@nealstarling5422 2 жыл бұрын
Looks like you reached over 6000 subscribers, that’s awesome!!! Keep them coming big B👍
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
Thanks brother. BG4L
@vincentsanchez8174
@vincentsanchez8174 2 жыл бұрын
Man! The UL-1 be FLYING! and you ain’t even giving it full throttle! That’s fast! That green TFL Popeye is a wicked lookin hydro, that’ll be a great video when you do decide to get it🤙🏻
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
The UL-19 IS Probably one of my favorite boats to run,, I just got a lower kv motor to test hobbystar 1700kv. Fingers crossed no more melted solder
@MT-THNDR207
@MT-THNDR207 2 жыл бұрын
I'd suggest going up to a larger guage bullet connector like those from Castle Creations. It ought to dissipate a lot more heat. Let's say you're running 12awg, I'd personally use one of CC's 6mm bullets with the kinda power system you're running.
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
Currently running 6.0mm connectors from ose so I may do to a cc6.0 thanks
@MT-THNDR207
@MT-THNDR207 2 жыл бұрын
@@IRONCLADRC Maybe even CC's 8mm connector for maximum heat dissipation
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
Thanks brother
@MT-THNDR207
@MT-THNDR207 2 жыл бұрын
@@IRONCLADRC Ofcourse
@V8JOHNNY
@V8JOHNNY 2 жыл бұрын
Hi Big B, When are you going to throw the 160A spektrum ESC into the sonicwake V2 and rip that on 8S? I have done it, now 11 runs on 8S - 100C spektrum smart packs, stock prop, and no smoke c'mon. It's a real blast mate.
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
Soon waiting on a flex cable for the v2
@VelocityKings
@VelocityKings 2 жыл бұрын
Nice session. Ran my Popeye this morning. Finally got her out for the first time this year. Get yours from OSE.
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
Are you running the included 4074 2050kv & 180 "stock electronics?" If so how are they holding up?
@VelocityKings
@VelocityKings 2 жыл бұрын
@@IRONCLADRC just the 180amp ESC. Changed motor to a TP 4050 can around 1500 kv give or take. ABC prop. Bigger collet and Qs8 connectors. Bigger curved turn fin as well. Had to make a bracket for it but that wasn't an issue.
@salvatorealessandrino945
@salvatorealessandrino945 2 жыл бұрын
Hallo do you have somecexperience with oracover o the boat is itcstrong enough thank you
@V8JOHNNY
@V8JOHNNY 2 жыл бұрын
Oh yeah, you have to go 6.0mm bullets for the 160A conversion. You have inspired me to go and get a UL19 V2 - c'mon
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
Good luck brother she's a hand full
@nealstarling5422
@nealstarling5422 2 жыл бұрын
Love to see you run your boats wide open for several laps at a time, noting how you tune them to turn sharp while maintaining speed. Smoke happens! Had a AquaCraft hydroplane not on par with the ProBoat hydroplane but a blast when holding the trigger down the whole time ! Have you ever had a tunnel hull? and please do elaborate more on you dads adventures racing pickle forks, love to here it! Great video once again big B. Thanks
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
I love running laps with this UL19 SPECTACULAR WATER SHOW.
@yevsnyder5387
@yevsnyder5387 2 жыл бұрын
Hey how are you I have my UL 19 all stock I drilled out the the ESC water cooling holes and also added the double letter pickup and I just wanted to know if you have any suggestion that I just I can only keep it stock for now but I want to run success do you have any better idea for cooling
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
Prop the. Oat down put some thing like a 1614abc prop or 1516abc prop. That should allow 6s operation w/ stock electronics
@yevsnyder5387
@yevsnyder5387 2 жыл бұрын
@@IRONCLADRC i got the 42 mm 3/16 prop from OSE what site can get the prop you recommended ? Thank man
@yevsnyder5387
@yevsnyder5387 2 жыл бұрын
Oh i see same place OSE
@barrywise2773
@barrywise2773 2 жыл бұрын
Hey IC , There are 2 Pro boats I would like to get if possible . What would Your top 2 picks be if You would like say .Thanks , Really like Your videos .
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
Do you have any previous boating experience?
@barrywise2773
@barrywise2773 2 жыл бұрын
I had a nitro 40 size mono . I like speed .
@marxboatworx
@marxboatworx 2 жыл бұрын
Nice run man going good with that 1616 on it..remind me again mate, what motor and esc you running in this now??
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
Running the sss 2000 4074 motor you sent a few months back and the 150 ose/flycolor
@marxdroneworx
@marxdroneworx 2 жыл бұрын
@@IRONCLADRC oh dur me! Thats right. Couldnt remember if you had it in the UL or the SWV2! Champ man. Thank you!!
@yevsnyder5387
@yevsnyder5387 2 жыл бұрын
I want to run on 6s without out over heat its possible? On stock
@IRONCLADRC
@IRONCLADRC 2 жыл бұрын
I wouldn't suggest it with the stock electronics, that being said, get a ose dual pickup rudder cool esc motor independently and prop the boat down with something like a 1614abc prop. That should allow 6s operation with stock electronics
@jonathandemaria1865
@jonathandemaria1865 2 жыл бұрын
Think it's time for a new meter
@Ricknrobin420
@Ricknrobin420 2 жыл бұрын
Urr i hate that smoke
@hoodatdare7039
@hoodatdare7039 2 жыл бұрын
GOOD ONE EH?
@giacomometelliify
@giacomometelliify 2 жыл бұрын
Questa è una piscina non è il posto adatto per provare queste barche
ProBoat RC Day - UL19 Problems, ZELOS Crashes, IMPULSE Spins & Flips = AWESOME!
16:21
Непосредственно Каха: сумка
0:53
К-Media
Рет қаралды 12 МЛН
Ful Video ☝🏻☝🏻☝🏻
1:01
Arkeolog
Рет қаралды 14 МЛН
RC Boat Propeller  Balance Sharpening  and Polishing  7016/3/410
7:00
MAK Performance
Рет қаралды 2,6 М.
HOWARD ARNESON AND THE INVENTION OF THE ARNESON SURFACE DRIVE
14:47
Mini V12 On The Dyno - (How Much HP Do These Mini Engines Make?)
16:31
One Year of Plane Crashes (2022 RC Plane Crash Compilation)
8:26
Two Brothers Radio Control
Рет қаралды 2,7 МЛН
#ProBoat UL-19  - Super Modified Hydro Blasting on 8s 💪💪
2:40
ProBoat UL19 Hits 78 MPH on Stock Electronics!!!
10:45
Sam Hallstrom
Рет қаралды 1,7 М.
Quick Diy PVC Rc Boat Stand For Almost Any Hull Type
25:18
IRONCLAD RC
Рет қаралды 692
Непосредственно Каха: сумка
0:53
К-Media
Рет қаралды 12 МЛН