Check out the latest repair video, we repair metal flake WITHOUT using professional tools, it is possible to do it yourself!! Make sure to Like, comment and subscribe!!!
Пікірлер: 105
@davethewelder14 жыл бұрын
Totally made it look easy. Thanks. Gonna have to reference. Your video couple times to get it right. Thanks again
@JBAutomotive7944 жыл бұрын
Thank you for your hand model skills
@dustinpitts27416 жыл бұрын
thankyou for doing this video it was very helpful;;;;;;;;;;
@crankintanks20926 жыл бұрын
Your the man good work
@781coolmind6 жыл бұрын
Nice work thanks for video
@MarkH05084 жыл бұрын
Good video!! Love you man!! Eye 👁 of the tiger!!
@backwoodzbum5 жыл бұрын
Dude thank you... I've been looking for just this info. I'll look into a puffer to aid in applying the flake.
@poochpatrol44064 жыл бұрын
He talked about the additives he used for the 1,2,3 coats on the final steps - what are they? Any links for em?
@carlosrodriguez6410 Жыл бұрын
What brand of gel coat is good to re-do my bass boat and where I can get it from?
@mmthug6 жыл бұрын
Can you tell me what you used in the prevalence sprayer
@jimcoleman45586 жыл бұрын
Like the new lead in
@RussellMarineProductsLLC6 жыл бұрын
Thank you!
@psychodad46342 жыл бұрын
What are the ratios you used for the Preval sprayer?
@ForrestOutdoors6 жыл бұрын
The Bob Ross of Fiberglass boats.
@rjd76976 жыл бұрын
Geez. Thank god I have an aluminum boat. Lol
@andrewhicks8663 Жыл бұрын
Blend it out starting with 80 grit on your repair spot and then 220 and then 320 scotch brite. Use sunshield with Mek after you spray your spot with straight gel coat and a little bit of mek and then come back and spray the spot with 1/3 gel coat and the rest sunshield and remember to slowly blend it out each stage,and you should never hit the tape line.After the sunshield Is sprayed blend it further out with 2 coats of straight sunshield and always fold your tape back so you don’t make a hard line. Ps.this is only if you want it to look like it was never even broken in the first place. Your demonstration is really good for the “do it yourself”kinda guys
@guillaumemeloche21224 жыл бұрын
Do you know how the pain is done on a 1997 stratos 290
@biggusdickus92404 жыл бұрын
Uhhhh..the repair is noticeable! Thanks for the vid,but if that was my boat,I would be pissed in a big way.
@zekethefishgeek8690 Жыл бұрын
Uhhhh... yessir yessir 3 bags full
@everettkozlowski2963 жыл бұрын
What is the brand of clear coat you used?
@charlesmayberry3303 жыл бұрын
What would it cost to do my 518 it looks good but got some dock damaged
@alabastertstud135 жыл бұрын
What were you using for clear coat?? I missed it. Lol
@ahamilce3 жыл бұрын
Hey Justin you mentioned where to get the filler but where do you get the clear coat and what mixes in it to make that spray contraption you had?
@christopherdougherty23122 жыл бұрын
Clear gelcoat. You can mix acetone to thin but styrene is best results.
@MrBdogg3177 ай бұрын
Did you continue to sand the bigger area either 400 grit?
@nathanbutcher18642 жыл бұрын
How did it hold up?
@justinboze98754 жыл бұрын
Do you have a materials list, so I don’t look like an idiot going into the parts store and don’t know what to ask for? Thanks
@user-xk5jh1wh8y3 жыл бұрын
Could i ask what do you mixed in that gel coat. because i cant find the materials you mentioned in Canada. Thank you.
@christopherdougherty23122 жыл бұрын
You want peroxide hardener and styrene for thinning.
@markthomson80752 ай бұрын
How long did each step take to dry?
@user-no3bc3lu6h2 ай бұрын
Can u guys added a list of the tools u guys used to spary the clear on with and the other tools or parts list
@Xray48584 жыл бұрын
Just purchased gel clear from Fibere Glast with MEKP, the company recommended a Duratec Fibre Glast Clear Hi Gloss Gel coat Additive for open Air Cure.. Should I use with the same steps following Metalflake Repair No Tools?
@christopherdougherty23122 жыл бұрын
Yes
@bryanwaters9456 жыл бұрын
great work. what caused the vertical and horizontal lines in the repair?
@Pitchpullin56 жыл бұрын
the tape
@TheBalloonBandit6 жыл бұрын
It was the tape and to much red flake as you can see it was a square shape. It would have been better with a puffer bottle and no tape. But it got the job done.
@jjones92902 жыл бұрын
You dont really need the tape for the color part. The flec should be blended into the surrounding areas just like paint would be. You would just need to go lighter on flec away from the damage.
@TaughtToTech6 жыл бұрын
You need to make a stress crack repair video! Nice work.
@whenboysetsfire16 жыл бұрын
Aaron Stahley indeed
@christopherdougherty23122 жыл бұрын
Stress crack is the same.use a dremel to grind the crack out.
@WrenchAddiction6 жыл бұрын
True American Badass!👍🏻
@RussellMarineProductsLLC6 жыл бұрын
We try!
@bipedalhominid68153 жыл бұрын
What about the adhesive from the tape thats still on the boat after you pulled the tape. You sprayed gel right on top of the adhesive!!!
@paullahmers7939 Жыл бұрын
Whats the purpose of wax active
@carolinagreenhead16 жыл бұрын
How would you do this if the damage area butts up against pin stripes of a different color?
@Sceneyour3 жыл бұрын
He hates his viewers apparently
@christopherdougherty23122 жыл бұрын
I have answers to all of these questions. It really is odd he hasn't replied. You need to use fine line tape on the stripes ,spray them on after flake,then clear it all together. Do NOT use tape on the edge.DO use masking paper. If you NEED to use a tape edge ,lift the tape edge up to avoid a hard tape edge. Subscribe to my channel to get responses. Lol
@tyleslie12315 жыл бұрын
If you put feather lines instead of the hard line you could have blended it better but great video none the less
@Bassmada3 жыл бұрын
How would you do feather lines?
@brentcoopermma6 жыл бұрын
What’s a good brand of clear gel coat you recommend?
@christopherdougherty23122 жыл бұрын
Legnos
@Jonnn212 жыл бұрын
I have a boat with blue metal flake where just the gelcoat is flaking off. What would be the best way to fix that? I have ALOT of areas to fix.
@zekethefishgeek8690 Жыл бұрын
Newer boat
@billysumner13934 жыл бұрын
I've gone to orioles, couldn't find the sprayer
@zekethefishgeek8690 Жыл бұрын
Not sure if you mixed enough filler to do the entire spot
@rodneyhatcher18584 жыл бұрын
How can you tell if you wet sanded threw the gel coat Would all the flake be silver
@rodneyhatcher18584 жыл бұрын
@mike h so I might have silver flake mixed in with the red flake or a little over spray
@tiffanylandry15173 жыл бұрын
Yes busted flake is silver
@mercman2.54 жыл бұрын
I think that hard line we saw is why we did not see a finished job??
@kevindflowers234Ай бұрын
I feel like you could've lightly sanded the corners to help blend in that square that was left from the tape.... I realize most would not see it but it sticks out if you know what to look for, and it would've only been an extra step or two... still good video and thanks for the info.
@bigcountry16954 жыл бұрын
Where did you get that spray bottle
@christopherdougherty23122 жыл бұрын
Home depot has them
@edmacey97156 жыл бұрын
Is there a base coat used first before flake? I was told by ranger that my boat had a black base coat do i need to do the base first,If so should it be a non wax?
@brentcoopermma6 жыл бұрын
Great video. Terrible at replying to comments
@rickgarza10416 жыл бұрын
Ed, how did your repair go? I have a 2007 z20 ranger Comanche that I'm going to try to repair.
@jamiestoss4206 жыл бұрын
Only air dry wax on the very last coat of clear when done
@Etownstomp095 жыл бұрын
USE 3M high strength marine repair putty.
@robstenger84605 жыл бұрын
Never make a hard line..
@The_Kirk_Lazarus3 жыл бұрын
It looks too obvious.
@ahamilce3 жыл бұрын
Doesn’t matter in terms of what to use or how to do it. I wouldn’t have taped it off to blend in the clear and metal flake but the instructional part of this video is great. The filler and the clear coat part.
@Sceneyour3 жыл бұрын
He didn't paint up to the edge anyway so there won't be a hard line
@1071jmkz3 жыл бұрын
How did you hide those hard lines in the finishing stage then...? They show up clear as day.
@erichuber78273 жыл бұрын
Trust me when I say this... Vanna White has more going on than her hands. And, you don't have those features, if you know what I'm saying.... Good video tho. I really I appreciate watching a pro show an amateur how to do these things.
@drdoutdoors1603 Жыл бұрын
If you roll the edges on the masking tape you won't have those sharp lines in the finished product. Metal flake is hard to get right though.
@Chevysrule4542 жыл бұрын
So the square will always been seen? Why didn't u finish so we could see the end result?
@VENETIS-MAINTENANCE5 жыл бұрын
just a tip from a proffesional....Never grind or paint near tapes or u will have that Γ sign always.Nice work but u can do it more proffesional.
@tlalexander34 жыл бұрын
what is the proper way to do it? I have a skeeter I just bought with an area taken out like this but it's a little bigger. I didn't know it could be fixed somewhat simply and I'm down to try it
@cam57524 жыл бұрын
Periklhs V I saw that he left that shape behind from the tape
@carlohiomile Жыл бұрын
Wait you didnt show the finish after polishing?
@norcal87184 жыл бұрын
You said it was two parts so would that be 50/50 or what?
@christopherdougherty23122 жыл бұрын
Not at all.
@knifeup75665 жыл бұрын
Good video except for one BIG thing: You didn't go into exact detail of what chemicals combine in your sprayer (and at what proportions) to make your clear coat. I don't know what to buy in order to follow your video!!! Do you have to make more than one batch since the first might harden before it's used? Please expand on the chemicals.
@Z-Ack4 жыл бұрын
Yea that part kinda pissed me off.. just brushed over the most important part thats unlike any other clear coat ever.. put in some clear, some of the hardener and what?? Then the fucker says put wax in the final coat??? The hell he talkin about? All ive seen as far as boat paint is a clear gel coat that comes in a friggn can... and who knew youd add hardener to a clear coat? Is he just spraying the fiberglass resin thinned out on it? And wax? Like candle or turtle? Like everybody knows all about this watching a how to video.. bullmess is what it is.. fuckery..
@mattbriggs65644 жыл бұрын
Z Ack it’s called wax in styrene. It stops the clear staying tacky. When you have gelcoat exposed to the air, it stays tacky. It is designed to be applied to a mould, therefore the finished surface is not exposed to the air.
@Sertao20134 жыл бұрын
You really need to get the dry flake sprayer . You add a little clear gelcoat and spray the dry spray flake over just that area no mess to deal with at all . At 10:34 after you removed the tape you should have went over it again with the acetone to get rid of the glue that's on the tape that transfer to the pained area you can not put to much acetone to . . kzbin.info/www/bejne/j56oXp55hrGdrK8
@mattlord29063 ай бұрын
A sticker, they hold on better than glue
@pet1srg3 жыл бұрын
Did I miss something? I didn't see the end result.
@cadenhutchinson57502 жыл бұрын
Not gonna lie, I would have just used red nail polish 😂
@danielpeterson98062 жыл бұрын
Keep the mask far away from repair area to prevent hard lines Wich are visible
@Sceneyour3 жыл бұрын
11:52 Halfin
@NoName-um4dt4 жыл бұрын
🙈 You can still notice there was a repair made.
@robbenvalperz11005 жыл бұрын
Really 😂
@andrewschoenfeldt56203 жыл бұрын
Just look at those sanding swirls and the taped blocks of repair…………..
@j.duncan29163 жыл бұрын
Lol. So now you see a red square where the repair was done.
@salimsopari3 жыл бұрын
ya whats up with that
@darinwaller46934 жыл бұрын
All I can say is don't waste your time doing it this way!!! That sprayer is garbage for spraying gel coat unless you thin it beyond what the gel coat is supposed to be!! All around bad information which your going to have a bad result!!!!
@christopherdougherty23122 жыл бұрын
U r correct. The sprayer works,though. Take that filter on the end of the straw off. Use styrene to thin.
@gerardotorres9963 Жыл бұрын
Sorry that came out really fucked up
@chrisbryant583 жыл бұрын
Where's the finished repair? All that and you don't show us the end result? Lame.