Rust repair on curved panel with basic tools 💯

[@rooster5726]

ROOSTER IN THE HOUSE... I am in Winterport Dragway JAMBOREE in Maine. Very sad that Chad & Jolene couldn’t make the event. I had a Special Day planned for them. I met some new friends from New Hampshire Ric & Duane. We hung & watched the old Flat Heads for Fridays Test & Tune. Told stories & have some good food great company. Today is Saturday & I am hunker down at the Hotel in Bangor ME. & my new friend went home this morning. Rain & winds cancelled racing. I will go home Sunday for a 12-hour drive. Prayers for Nova Scotia to weather the storm. Chad & Jolene, I hope you guys see this message & I will see you next year. ROOSTER th SUPER FAN

[@phillipcortel6330]

Chad. You are a surgeon with that zip cut tool. Like how Jolene made the gloves appear !

[@fredpierce9363]

That was a comical moment when Jolene threw the gloves to Chad. She's the boss and it also emphasized safety. Good going. It made me smile.

[@hickeyskustomresto]

Take what you want, leave what you don't. The panel fab looks good 👍

[@brucewitcpalek5120]

Yes 👍🏽 that’s what I always say when the nay sayers start criticizing what they don’t like !!

[@scazzaozm8168]

You both are awesome just remember ...IM BAD CHAD QUEEN JOLENE ON THE CAMERA AND WE ARE ON AIR ...be proud to say that everytime u turn that camera on in shop out side at home or in public say it and be bloody PROUD TO DO SO you both deserve the fame comming your way for decades to come hows it go ......lol

[@robertdehaes7572]

So easy to get discouraged when you get into a lip stick, silk purse car. You really encourage people to keep going.

[@tonymosca6591]

Chad always breaks things down for those with basic skills to accomplish fabrication. Thanks Chad and Jolene!

[@rayogrady4349]

Keep it simple.

[@canmanjv]

That panel looks real good, Chad has done a great job fabricating the Panels.

[@srcazier]

Jolene is amazing. She is, in my opinion, THE best with the camera. I watch a lot of youtube and I don't see anyone who comes near to her knowledge and ability.

[@kevinwilliams7979]

Chad and Jolene. Could you please do a shout out to my wife. She goes in for surgery Monday morning and she and I are huge fans . We watch every night. Thank you and God bless ❤❤❤

[@kevinwilliams7979]

Er name is Lori Williams

[@alexanhellberg]

Tight and right..Tight and right. Looks great Chad, so talented 🤓

[@crazywickedcustoms7272]

You and Jolene ate amazing people. You do give me inspiration. I have beaten cancers. I. Though i wound never build a d paint cars and trucks again. We i am , now again , i am slow. But Chad reminded me of skill and things abd way i have done. Thank you.

[@howquick]

More ‘awesomeness’. Thanks Chad and Jolene. 👌

[@Papaws-Hobbies]

When I saw the storm heading your direction I did wonder if it was going to hit your area. So glad that it calmed down to a tropical storm.

[@russgould7458]

Not having hie “eye”, I completely appreciate th way he sees things! Thanks for a great vid

[@joshburton1165]

Chad you are speaking my language talking about trees and power lines that’s been my Job for 20 years hopefully y’all won’t be affected too much by this storm

[@barry0517]

So glad Jolene took your talents and made it known worldwide. You both are wealthy and benefited from the productions.

[@georgetinnell470]

Hell of a job brother I have learned a lot from you. Thanks very much. From Virginia 👍

[@johnlove5715]

hope the power stays on and you don't get too much rain. enjoy the session today.

[@ragsgoshen]

Chad, I am a body tech, been one most of my life, glass, paint, you name it, I would love to relocate up your way and work for you, I love old cars and had a bunch through my life, I am at the point in my career where I wanna do what you are doing, if interested in me working with you guy's give me a shout, thanks for your time. Keep up the good work.

[@ragsgoshen]

By the way I am in the Washington D.C metro area..

[@mikebeidelman6051]

HI Chad & Jolene, I hope the storm coming your way does not cause any more trouble for your area. I noticed your new grinders on /off switch does not want to cooperate your desires, don't let it piss you off in time it will yield to your control and obey!

[@ate-updesigns9186]

Looks good another day in the Hiltz school of customization...cya tomorrow 😊

[@Pwandlina]

Nice work Chad. Hey it's great to see you working on a variety of projects but it would also be nice to see you go back onto some of them and make a bit more progress. I'd love you to go back onto the T Bird and do a bit more, same goes for the hauler and the Bugatti.

[@richardjennex6583]

Good evening Jolene and chad I hope your doing well and I hope the storm isn’t to bad on your end of our Beautiful Nova Scotia island

[@philipwaddell]

great video take care you two and fina in the storm

[@donlandenberg8126]

You went with it like a pro. Sorry you lost power but it shows how good you are. No missed beats. Thanks for sharing with us . Just a side note the last time we lost power we had a child. Lol

[@brucewitcpalek5120]

You make it look so simple bad Chad !! Nice work

[@larrytaylor5236]

Great workmanship and camera work

[@davidsimpkin1213]

The metal magician !!! looks great guys...

[@jeremyconway5793]

Great work with the puzzle pieces it's so satisfying watching someone else do all the work guys. Greetings from sth Australia 🇦🇺 👍

[@arthurmccarron4379]

Really taking shape. Thanks

[@greghendren4234]

You two take care in this storm. Keep up the good work.

[@cathyandgreg4239]

Working through and with the storm...car is looking good....I hope LEE left you in good shape.

[@The_Kman]

Great camera work today Jolene!

[@ArthurParker-xr6qu]

Fina always make the day so well….❤❤

[@davemackinnon6132]

Always good to watch. Have learnt heaps & my skills are getting there. Watching from New Zealand

[@stephenfularz7573]

You are doing a fantastic job chad so is joline.

[@annawhitis4251]

Chad you do excellent work !!!!! Kevin Phoenix

[@jerrybailey5797]

That was some great fabrication work Chad, love how you break it down into sections, makes it easier to understand the procedure 👍

[@Gas_n_Gears]

Nice! Good shootin' Jolene! Hey Chad, Spray Nine makes those Sharpie marks wipe right off and it's cheaper than thinner.

[@jaygee6983]

still got wind in maine but my new welder fires right up and does the trick looks like we got lucky not much of a storm almost no rain

[@Aaronlewis8846]

To bad the power went out there. But brother you are doing a fine job on this car. Another awesome video Jolene.

[@pierremorin4775]

That nice work Chad I’m falling in love with that car good video thanks

[@WilliamNast-v1g]

YOU'RE QUITE AN INSTRUCTOR, CHAD. THANKS FOR TAKING THE TIME TO DO THAT!!!

[@RoninDosho]

Another awesome instructional video.

[@josephseverino674]

That Plymouth body is starting to realy looking good Chad,i enjoyed watching your videos,

[@joey193650]

Looks good from space!

[@peterwall4739]

The mics sound good.. stereo!!!😊

[@rcbodyshopfr]

Very clever again how you found the most efficient way to do the job, just one cut at the right place and you made a complex compound curved piece! On the floor 😊 Bravo 👍

[@BudFranks-fu9ye]

Love the way you break it down and simplify it👍👍

[@scazzaozm8168]

And dont let the jelouse ones try ruin your day we love you guys from downunder australia

[@grantjohnson1474]

Great job again

[@gdbd6181]

Awsome job Chad you too Jolene

[@merylinhuet194]

Bad Chad in Stero, we Had Great Sound, A Good Job...

[@jonathanpotter4653]

Really enjoy watching you work. Thank you. And I have been concerned for you all,I've prayed for your safety. Take care guys. 😊

[@stevenrennie2612]

Ahright chad I have recently started watching u as a I’m a Scottish man and also into fabrication and welding

[@josephbarnes7217]

Your skill are top notch

[@randymcgee9176]

You make it look so easy. Your top notch when it comes to making parts fit

[@larrybailey43]

Thanks, Jolene for filming that !

[@Artaxerses1945]

Great work !

[@johndenyer9555]

You are doing a great job on the Plymouth. When you get a chance you should remove the shackles and turn them upside down. They are not supposed to be hanging down like that. People years ago turned them upside down to raise the car in the rear. It’s not right the way they are. Just for your info.

[@ArthurParker-xr6qu]

Awesome work chad..as always ❤

[@motercycle80]

I would be proud to have that car amazing job and how to video

[@randyhorton8369]

Amazing work as always.

[@EricEmerson-d3d]

Awesome work

[@williamcummings6562]

Sure am sorry about the races getting ruined . I was all set to go. I live about a half hour from there. Wanted to meet you two. Damn!

[@joeblast81]

Nice 👍

[@DuaneMiller-x1k]

Hi Chad watching you design pieces n shaping metal for your cars n things is really interesting . I haven't any hot rods or custom cars but like watching and going to car shows. Keep up the great videos n God bless you n also your camera queen . Watching from belfair Washington . That's in Washington state not Dc . ❤️❤️❤️👍👍

[@berlynreed4253]

I suffer from Presbyterian too! Or is it presbyopia? One of thos presbys!! LOL I have to wear my glasses to see as well!!!

[@hoperyan6631]

Looking great

[@markplant2184]

Awesome, Thanks

[@ferguscosgrave7510]

Thanks

[@jamesbronson12]

Best hangover food YOU'LL ever eat.

[@davidhiggins3600]

Thought you'd zink prime the metal before placing your pieces, just for longevity. Lovely job though.

[@alfredofrancelinodesouzafi3637]

Concordo plenamente com o colega.

[@scottsvillerebellilbitofev9927]

It looks good an it's your car do it the way you want can't wait to see it done 😁

[@venombob3364]

thanks for the overtime guys love the longer vids

[@kipbrown1549]

Looks great ///////////

[@lukeandjilljelsma654]

No matter what Chad says, it sure looks like a restoration to me.

[@Hneely]

I live in a rural area with lots of tall trees that catch fire and fall on power lines during storms. And I know plenty of guys that trim trees for the electric company. The way it works is they make their rounds trimming trees, just a handful of trucks, they make their rounds through a lot of power lines and it takes a good long time to get back to where they started

[@franklindner8259]

Jolene u need a utility belt with extra gloves markers. And. Discs and 1 hammer😂

[@jimmylarrosa1742]

Qué buen trabajo de chapista un artesano te felizito

[@ronsnyder7435]

Nice

[@cannabisticannabisticino2718]

Gloves? Immediately available, on the fly ✅ Blackout? There's no problem, in fact it's a good opportunity to take a break ☕ Great work guys 😎👍

[@jamesray3292]

Beautiful work Chad, I really like that car. I remember when they first came out, I went to the dealership to see them. The fins are neat, they called that ( The Forward Look) Nice ride, are you going to repaint it too?

[@johntrusewicz]

From The Villages in Florida we hope the storm pass you by.

[@JimKahler-no3tp]

Chad you are doing great and making some improvements to the car 😊

[@johnhazard5231]

Was thinking of your glass guy how is he doing .hope all is good

[@specialized29er86]

I was thinking the bumper bar covers all that new metalwork and after Googling the 1956 Plymouth I see most of that is exposed.

[@kyleheinz6785]

Get it Chad!!!!!

[@colinstables]

Awesome

[@mrkoldkanuck]

nice job fabricating

[@andrewlowe7427]

Verygood

[@73superglide62]

Do what makes you happy .pay your bills

[@troyadams1076]

Looking good car is coming around

[@tonycall1309]

praying for you all,

[@crazywickedcustoms7272]

Yes, this i know this all too well.

[@stephenfularz7573]

Hi fina.

[@danmartin633]

The difference between the master and the novice is that the master has failed more times than the novice has tried. Thought you might like that, Chad.

[@Kabeer_Humanity]

I believe if you would have taken a piece of aluminium foil and used it for tracing it would have made it easy too😊😊

[@rickarndt3895]

I bet you had the coolest scissors ✂ in gradeschool