Rust Repair on the Nissan Figaro Part 3

[@somethingvisceral2003]

When I was your age I wouldn’t have even thought about doing this kind of work. Amazing job so far and I think you found your life’s calling. Keep it up. Also we can tell your are getting more confident in your videos!!

[@tony_25or6to4]

I wish I had the knowledge and equipment when I was 16 and riveting in thin sheets of metal and covering it with Bondo. If I had the equipment and his knowledge, I would have finished by '68 Plymouth.

[@LaverneDefaziox]

Welders are actually affordable now

[@avinashsangle1208]

At least some of samcracs projects are being finished Zach did a good job

[@shimeih2287]

Right?😂

[@azureeykola]

"Still not sponsored by Crocs" You got me cracking right there! Nice build!!

[@johnnoid]

It’s a joy to see the art of body repairs still exists in times where everything is thrown to the garbage uns immediately replaces with new parts driving the cost always up. You work exactly like my father used to work from the seventies up until 2010. Keep up the good work, always a joy to see your videos.

[@signdeals4972]

Hot friend in a BRZ absolutely takes priority over the Figaro.

[@Anne6621]

good job !!!!! what kills me are the body shops that hack rust repair with screen and filler and making a patch out of steel is just as easy ,,, out of sandpaper ??? one word , inventory !!! lol what you need is a Central AC sponsor !!!!!

[@Chrisb8s]

Samcracs wife is lucky to have you doing this work

[@shimeih2287]

💯

[@edpollard989]

Enjoyed, keep up the good work, liked the bonus repair for your friend.

[@williamduhamel7726]

You may want to drill some holes on the bottom of the doors so water can drain. That looks like a design flaw.

[@redstarpair2198]

Great work dude, keep on. Big hey from Croatia 🇭🇷👍💪👏🤙

[@96roadmaster]

Not that many show rust repair and fabrication. I really enjoy watching you tackle it! Saves a cool car!

[@chrisfinley4816]

Nice work always help out that friend. 3 hour drive hope you are reading between the lines.

[@OakKnobFarm]

Great work! I've only welded replacement panels like this a few times, and you make it look really easy. The front corner looked like a nightmare to refabricate!

[@trob7348]

your attention to detail is very impressive gold star work keep well

[@dragnet53]

3 hour drive home?! damn son that is a far trip.

[@jtheun]

I would like to see more of how you fab the parts you speed through some of the more interesting parts of your work

[@magicworldtv6347]

Surprisingly, you're very young for a car maker. But I see that you are very talented and your hands are golden. I wish you good luck in your business and all the best brother!!!

[@toolzshed]

Been waiting for this episode woot! Can't wait for the next one!

[@discingaround]

Samcrac will be happy it's sans rust. Looking fantastic!

[@SuperJmbk]

Hopefully he's paying you what the job's worth, not promising you exposure.

[@ZippoVarga]

Your video is #3 in the search for a Nissan Figaro! I'd say you're doing it right young man! Keep doing what you do and we'll keep coming back for more. Cheers! Zip~

[@donwright3427]

They are cool little cars and going up in price in the UK if you can find a good one. Another similar car is a Diahatsu Copen but not sure if they came to your side of the pond.

[@scottloudon14]

I've been enjoying your videos, thank you.

[@chrismason6857]

Sub from England. Keep grinding mate. Enjoying your content.

[@bigbird2100]

Great video good idea to remember to cover the windscreen 👍.

[@kevinbrennan6546]

If I had one minor suggestion it would be to slow your camera movement so we can see your work a little better. Love the channel and especially the Figaro.

[@corbinkelley2670]

Great work how do you know how much to charge when you can see all the work needed at first glance. I always get screwed when doing jobs for people.

[@olemller7885]

Please protect the nice interior while doing this work.

[@ultimaterebuilds7127]

The interior is far from nice 😂

[@vikingman4614]

Next video he repairs Tavarish's Mclauren. That would be insane

[@ultimaterebuilds7127]

Waiting for the email. 😂😂

[@fabulousprofound]

@@ultimaterebuilds7127 any thoughts on how to fix it? Or is it toast?

[@ultimaterebuilds7127]

I haven’t watched the full video but it looked pretty rough

[@vikingman4614]

@@fabulousprofound it looks rough that's why I mentioned it.

[@jouleskelvin]

Dude... He should definitely let you tackle it. NO way he could do as thorough a job as you. 👍🏼

[@delboytrotter8806]

Good stuff dude.......... I like your approach to car repairs... P.s. dig them funky tunes.....

[@shimeih2287]

Mans really working hard for that Crocs sponsorship..lol.. Nice work though man. I'm loving the content. It's the type of video I want to never end..lol😂

[@BEVO_vs_The_World]

Loving the croc jokes... love the work you do more. Looks like its coming along just great. Keep up the good work!

[@bkuznick]

A Lot of work cutting and fabricating. But, you should cover up the interior and engine compartment when cutting, welding and grinding. Saves time and possible damage that could happen, safety third!. Good Luck!

[@craigrobertson7938]

This is just a Nissan Micra with a fancy body. You can get a turbo kit for the engine. Would make it better in keeping up with modern traffic.

[@roxieloot]

Thought they came with a turbo as standard! But a modern turbo upgrade & exhaust wouldn’t hurt.

[@TheHienax]

Great work! You should remove the interior... Just to avoid surprise rust spots.. Great car they are going up in value

[@armandosairally]

Nice job always helps to have a garage.. Looking forward to the next episode 👌

[@nissand21boy]

Should have zinc/weld through primer on it, and if possible the inside of the panel aswell, I'm repairing a 1990 JDM Datsun d21 that makes this look like a walk in the park ATM, and work on other nissans or JDM cars and specialy in UK climate everything has to be prepped , treated ect it it will rust again, And waxoil it once clean ect in the panels and floor

[@davidfrackleton77]

Quality bruder respect good video ❤👍 *Dave, Liverpool, UK* 👊

[@dcallan812]

Almost 29k well done.

[@OooOoo-vl7wy]

Great video keep them coming

[@jamiewaygood1018]

Great episode man, love the music in this one as well!

[@jero_lead]

Good music, good content, cool guy, nice projects. I´m in!

[@ejoautovideos]

How come I haven't discovered this channel before?? Top quality content mate, greetings from Sweden 👍😊

[@ayourk1]

I don't see many drain holes on that door still.

[@ultimaterebuilds7127]

Still have to drill the holes for the door panel mount crews

[@davidelmsly9408]

Great music choice. Nice work bro. Some more shots of the metal ground down before you cut out the rot would have been good.

[@TheJensenInterceptor]

Your welding with the battery still attached, how did you do this when a battery attached and live during welding can have bad impact to the electrics and electronics. There are electronics even in older cars like this one for voltage regulator and alternator plus can even be other instruments and ignition.

[@NinjaFresh]

Coming along really well.

[@Finne72]

Impressive work there, keep it up!

[@christianrodrigo5010]

Gute Arbeit geleistet 👌👌👌👌👌und das in der Garage 👍👍👍👍🇩🇪viele Grüße aus dem Rheinland von nem alten KFZ-MECHANIKER

[@realmachine]

Never learned English in Germany?

[@SpeakingRoles]

Blue, Pale Aqua blue Please. Spring season

[@ppilot41]

Hi, What thickness steel did you use for the repairs please?

[@TheJensenInterceptor]

why did you not cover the engine with a sheet to protect from the mess and a sheet cover for the interior as it will have been heavily covered in dust and dust smells I know I create the same mess especially when I an an grinding down old filler, I have a cloud around me so I have the Vacuum on all of the time.

[@SALEHAQ]

I like your videos already .. Keep it up ! .

[@syednadeembe]

You need to get a stable camera buddy one that has ois

[@RESTORATIONRESCUE]

Great video bud. Looking great.

[@sethisnotnightowl]

4:39 I think what would be better for a saying is, “Almost OEM” Goonzquad got that saying stuck in my head 😂😂

[@neilis2405]

Dude wear some long sleeves and pants when welding. That burn is gonna hurt later . . .

[@ultimaterebuilds7127]

You’d think I’d learn my lesson one day.

[@webrubriek]

@@ultimaterebuilds7127 safety first bro, you are doing a great job with ur restaurations but do wear protection, ur also a teacher for others, so teach Them the right way. And when ur welding wear some gloves. Keep it up. You have a Nice channel and good content. Peace.

[@ferbbb]

Haha, must be nice to have a car-savvy friend like you around.. 🙂 Also, she's drives quite the car for a girl.. 👍👍

[@estpst]

cute little car

[@jere1342]

I love these videos.

[@lennym1273]

Would love to see that car in 18 months...

[@through_changes]

Great work.

[@doncartermcclendon]

“Alright she’s gonna go ahead and leave”

[@rickr9055]

Awesome work, keep plugging along. Where is your hating little stalker @la_plata now?

[@EB240]

Love the content, good job

[@tonyrussell9671]

looking good

[@samlauer8855]

How much did you buy it for originally

[@steveg843]

Keep up the good work and please wear eye protection.

[@bradgray1279]

For the sake of your future, I would urge you to wear proper safety equipment when welding, grinding, and using a wire wheel. Gloves, long sleeves, full face mask and at least close toed shoes. It’s no fun getting those wires stuck in your skin, or hot welding sparks burning your skin, but even worse is the risk of skin cancer from the very intense rays put out from welding. Otherwise I really enjoy your videos and wish you a successful future.

[@mouradmrsbb5205]

👍👍👍👍

[@VicariousAir]

I see 100K in record time.

[@tony_25or6to4]

If Sam would promote him more, maybe. I'm surprised he's still under 30k.

[@shimeih2287]

@@tony_25or6to4 I would kind of understand if Sam's not promoting him on purpose. Maybe he wants him to organically grow his fanbase for himself, otherwise it will be Sam's fans following him then they will get turned off because he won't have the same quirks and features as Sam. I wish he promoted him more too though.

[@tony_25or6to4]

@@shimeih2287 if Sam would promote him, people will check him out and decide for themselves. Once people get to his channel, it's up to him to capture them as subscribers. Based on the quality and subject of his videos, he should have 75-100k subscribers at this point.

[@SuperJmbk]

@@tony_25or6to4 he actually takes pride in his work unlike that crackhead hack Samcrac

[@alanaudi640]

What about the inner side of the bare metal that you welded on the car ,won’t it rust? (Good Build👍🏻❤️)

[@ultimaterebuilds7127]

That’s what I sprayed with etching primer

[@trbstang]

I've seen other channels using spray cavity wax for those hidden inner panels. Might be a good idea in addition to the primer.

[@ultimaterebuilds7127]

Thomas Bailey yes. I’m planning on that too

[@Cartier_specialist]

Your beverage of choice have alcohol in it? Never heard of it before.

[@ultimaterebuilds7127]

It does. Not much though. Great for hot days or the beach! 🤙🏼

[@iamangelboy4512]

love you USA from Pakistan

[@gregorizi]

How much will Sam pay you for yob?

[@vikingman4614]

His friend is beautiful

[@motorhead915]

Viking Man simp

[@ultimaterebuilds7127]

10/10 comment ☝🏼😂😂😂

[@PapiDoesIt]

Good video other than the unfortunate music selection. That's a lot of grinding but it is paying off.

[@ThomasSchick]

👍🏻

[@speedtrapp219d2]

Good dude

[@khongcanniem.2932]

Ok goot

[@cigarjefe]

Nice

[@120Livi]

Are you being paid for this restore by Sam?

[@gezzuzzful]

im sure its peanuts.. lol.. but if you want your shot at youtube fame..

[@SuperJmbk]

If samcrac can take advantage of someone he will surely find a way.

[@kolasillers7776]

Etch primer before filler? No.

[@ultimaterebuilds7127]

There’s no etch primer under the filler. Just on the back side of the new sheets of metal

[@jurekjurek7965]

Za 2 lata będziesz robił to samo w tych samych miejscach.

[@tamastoth63]

that fiber glass is the worst thing u can use :'( u'll unable to see the rust... cuz it is under the fiber glass :// use filled putty instead. ( if the rust comes out again. u can see that, cuz its drop off the putty, or "bubbles" appear n he chassis)

[@enjaygarcia]

wow

[@WilliamAPBodie]

WHAT only 16 years old ??? got such a beard only after I was 35 !!!

[@ultimaterebuilds7127]

Lol I’m definitely not 16 years old

[@RumbleRoverTV]

Nice content. But please tide your hand behinde your back.

[@uscjake868]

Check on a channel called "the inja". They got a cheap chinese e bike for $1500. Would be awesome to see you build a custom bike like they are doing.

[@hermannlang5776]

Love the content, but can you please have less time laps over the actual work. We want to see you weld, apply filler, sand, etc. even if it adds 15 minutes. Keep up the good work,

[@MostynFaulkner]

👍👍👍😎😎😎

[@ducknorris233]

EZPeezy bolognesey

[@oogie-boogie]

your friends cute

[@markusweinicht9978]

Wasted time.