Over the last few weeks i took out a section of block wall and built an RV Gate. This Project was way more work than i expected but it turned out beautifully.
Пікірлер: 89
@arthuramaro26683 жыл бұрын
As a fellow arizonan...great job looks professional.
@RogueWrenching3 жыл бұрын
Thanks for the kind words!
@ericrachal61333 жыл бұрын
Hello from another Arizonan... I was going to build a second one and my HOA stated only one RV gate per home..($%^&*(hoa) So, now I'm about to build two new gates in the backyard... I used the man made boards and they work great! no painting or treatments needed. Great job! & what a GREAT helper you had... lol
@edgararcega30462 жыл бұрын
Well done! I was stoked when you said you were from Arizona. I was like omg that's where I am moving to in March! Reason why I watched your video is because the house i am buying has a RV gate that has a bottom hinge that detached on one side. I've worked with reattaching hinges on wood but never on cinder block. Just trying to figure out how old be doing this. But yeah man that gate looks sweet.
@RogueWrenching2 жыл бұрын
It really depends on how the block was built, if there's good concrete inside simply drill a new anchor, if it's just block I've used tapcon concrete screws. If you need help go over to my channel page and there's an email address, feel free to shoot me an email and I'd be happy to do my best to help.
@edgararcega30462 жыл бұрын
@@RogueWrenching Thanks for the advice! Il look into these tips.
@dee.ego.67829 ай бұрын
Looks amazing
@RogueWrenching4 ай бұрын
thanks!
@arceo19822 жыл бұрын
Thanks for the video and inspiration thats exactly what i am looking to do. Great Job !
@RogueWrenching2 жыл бұрын
I'm glad you found It helpful! I've got another video on my channel that shows more on the actual gate build if you're interested.
@marlborodpte1111 Жыл бұрын
You did a good job man I live in Arizona I build gates and block walls and you did a great job
@RogueWrenching Жыл бұрын
Thanks!!! The whole thing turned out ok as long as you don't look too close at the block haha. This was my first time doing any kind of masonry work.
@marlborodpte1111 Жыл бұрын
@@RogueWrenching if you ever need help let me know
@zachodi66185 ай бұрын
How much would it cost to have something like this done?
@marlborodpte11115 ай бұрын
@@zachodi6618 where are you located?
@TheJammer7654 жыл бұрын
Fellow arizonian. Just bought my first house and am looking to do some DIY projects similar to this. Probably will be bugging you in the future lol. Subscribed
@RogueWrenching4 жыл бұрын
@thejammer765 feel free to reach out if you need a hand, congratulations on the new house purchase!
@hamyncheese2 жыл бұрын
Same situation for me! Congratulations on the House!
@vincei21472 жыл бұрын
@@hamyncheese Just did the same thing! :)
@hamyncheese2 жыл бұрын
@@vincei2147 👍congrats!
@Taco18449 ай бұрын
Nice, very inspiring.
@RogueWrenching8 ай бұрын
Thank you!
@Member-el4zo2 жыл бұрын
I like it, good job
@RogueWrenching2 жыл бұрын
Thanks!
@miguelople7084 Жыл бұрын
Man i need your help I’m from arizona too here in Glendale. We need 1 single door and 1 double door. Our house have a wooden gate and it broken since we moved in. Wondering if you’re not busy and need some side hustle to get our gate done too 😅
@RogueWrenching Жыл бұрын
Shoot me an email RogueWrenching@gmail.com
@ArchinatorWC883 жыл бұрын
Awesome job Bro!
@RogueWrenching3 жыл бұрын
Thanks!
@shovel86cu10 ай бұрын
Great Job!!
@RogueWrenching4 ай бұрын
Thanks!
@srteight3 жыл бұрын
Great job, what kind of Mig welder did you use?
@RogueWrenching3 жыл бұрын
It's a cornwell branded unit, I don't know the model off the top of my head, but it's a 110v mig.
@noevaldez59713 жыл бұрын
Nice! I also live in Arizona and just built an rv gate but can't use it because my neighbor blocks it with his truck! Hope your neighbor aren't assholes like mine
@RogueWrenching3 жыл бұрын
I've got pretty great neighbors honestly, that sucks you can't access your gate.
@joshthomas67022 жыл бұрын
Where did you find blocks to match the color of your existing wall?
@RogueWrenching2 жыл бұрын
A local company called "Preach Building Supply" in Buckeye AZ stocked them. They are Oldcastle brown, most hone depot stores can get them but they have to be ordered.
@michaelchilds3494 Жыл бұрын
Looks very good. Question after bolting the flame to the block wall what kind of mechanism or latches is used to open and close the gate? And how was it mounted ? Thank you
@RogueWrenching Жыл бұрын
I welded a piece of round tube (3/4") to the bottom of one gate then cut a piece of rebar I salvaged from the section of wall I took out, and slid it through the tube, then drilled a hole into the concrete foundation from the original block wall so now one gate has a pin that slides into a hole in the ground ro hold it closed, then I welded a standard gate latch to the tops if the gates so the other gate locks to the pinned gate.
@Manduhlynn4 жыл бұрын
Nice! What where did you purchase your hinges and the metal?
@RogueWrenching4 жыл бұрын
@Amanda Thanks so much for watching, I'm giving away $100 to a subscriber so please consider subscribing, I bought the hinges from Hardware source, here's the link to what I bought: www.hardwaresource.com/two-piece-welding-hinge.html They are weld in, but they have a ton of hinges of all shapes and sizes. Worth checking out for sure. I think with shipping 4 hinges was around $20.
@RogueWrenching4 жыл бұрын
Here's the link to the entry video: kzbin.info/www/bejne/jWK1qWiDZdZjfNE
@RogueWrenching4 жыл бұрын
I also just read that your question included metal. I bought the small stuff from metal supermarket Phoenix, and the outside frame from Arizona iron supply.
@hazard13712 жыл бұрын
Bro question, I still holes to my blocks for the gate and the screws (Or whatever they're called) are lose to the stucco (Block) so my gate is a bit lose, how can I tighten them up or is there some type of glue for the bolts to get tight in the block holes? Door is a bit lose, works well but bothers me. 🙃😲
@RogueWrenching2 жыл бұрын
I would try a concrete epoxy, home depot or Amazon are probably your best sources. That's if it's a bolt style anchor like I used here, if it's a screw there's not much you can do but I've seen success jamming some copper wire in the hole then running the screw next to it, never tried it on a concrete hole but it might work.
@hazard13712 жыл бұрын
I apologize for the damn grammar *loose lol..Okay yes, I used or should I say my father and I used the bolt styles you did, not screws. I'll go ahead and get that epoxy, it's been recommended from some of my co workers, thanks for getting back to me quickly!!!
@RogueWrenching2 жыл бұрын
@@hazard1371 happy to help!!! Make sure to let the epoxy cure fully before tightening the nuts.
@user-gi3xj8nz3s3 жыл бұрын
hey great job keep up the good work. what would you recommend for a newbie like me I have a small gate on one side and I have a wall on the other side of my house I would like to put an RV gate. I would like to use the current front gate door and move it over to the other side of the front of my house . The side with the small door I would like to put an RV style and use this small single door on the other side of the wall that doesn't have anything just wall brick. Don't know if you understand what I'm trying to do I hope you do. What type of tools would you recommend me. I do happen to have the basic tools in my house like a hammer drill, skill saw etc... I see you get the job done and do it by yourself keep up the good work and the great videos .
@RogueWrenching3 жыл бұрын
I think I understand what you're asking, as far as tools I've got a video that in the works (just need to edit it) that shows just the building of the gate in a bit more detail. (Definitely should subscribe to make sure you don't miss that video) but I use a 110 welder that's branded a Cornwell but I believe it's a rebranded Miller. I've just got a new band saw (also have a video coming on that) and a chop saw. Not a ton of tools required but some like the welder and band saw are kinda spendy. Harbor freight is a good option for low cost tools, some items are decent in terms of quality but the big consideration is how often you'll use the tool. For example if you're going to be using a welder ever day it's probably worth spending a bit more money and getting a nice one. If it's for one project get the cheapest one that will work. Check out some other videos on my channel I discuss tools in a few. If you have any other questions I'll do my best to answer them.
@user-gi3xj8nz3s3 жыл бұрын
Cool thanks for answering I’ve got a Lincoln 125hd and also got a porter cable Chop saw never used before would like to on this on myhome project
@kdogtv2 жыл бұрын
Supplies list please and what did you use for the site posts? I’m in chandler btw
@RogueWrenching2 жыл бұрын
It's a long list, something probably better handled via email than here in the comments. Please email me @ RogueWrenching@gmail.com
@lovable0413942 жыл бұрын
Where did you get the actual gate from? Or did you make it?
@RogueWrenching2 жыл бұрын
I built it myself, I built another one like it and did a separate video, check it out here: kzbin.info/www/bejne/j3jCXpeZpsSIa7c
@stoichiometry1472 жыл бұрын
Video was super helpful. Wear PPE when cutting concrete bubba. Does terrible stuff to your lungs. Stay safe.
@RogueWrenching2 жыл бұрын
This was my first experience cutting concrete, at the time I didn't know about the hazards of concrete dust. I do now.
@chadspinalbosd0073 жыл бұрын
Where did you buy the door frame?
@RogueWrenching3 жыл бұрын
I built it from scratch
@jeffreycarstens9998 Жыл бұрын
What did you actually use to anchor to the wall
@RogueWrenching Жыл бұрын
I used 3/8" bolt type concrete anchors
@christopheringleton69713 жыл бұрын
Didn't even show the part I wanted to see... my search continues.
@RogueWrenching3 жыл бұрын
What where you wanting to see?
@christopheringleton69713 жыл бұрын
Usually you would drill the holes. Put the hinges in the block wall then fill the block with cement. In the video the cements filled and so he drills holes in it but then what? Skipped the process of how the hinge would hold that gate
@RogueWrenching3 жыл бұрын
@@christopheringleton6971 I drilled and set 5x 3/8th inch concrete anchors then bolted up 2x2 angle iron to the block then welded the hinges on.
@tgshaffer3 жыл бұрын
What did you use to cut the block wall?
@RogueWrenching3 жыл бұрын
I've got another video that specifically covers that exact question! kzbin.info/www/bejne/i5WsooylgJilnKM
@tgshaffer3 жыл бұрын
@@RogueWrenching great thanks!
@RogueWrenching3 жыл бұрын
@@tgshaffer Happy to help!
@MediumRareSteve Жыл бұрын
I could tell that was AZ right away. 😂
@RogueWrenching Жыл бұрын
110 degrees haha definitely Arizona.
@harleysadler13144 жыл бұрын
Nice weld job.
@RogueWrenching2 жыл бұрын
Thanks, my skills have come a long way.
@desertrider3252 жыл бұрын
What type of anchors did you use for the posts to the cinder block?
@RogueWrenching2 жыл бұрын
I used 3/8 bolt style concrete anchors to anchor 2×2×1/4 angle iron to the block then welded the hinges on. I believe these are what I bought: www.homedepot.com/p/Red-Head-3-8-in-x-3-in-Hex-Head-Sleeve-Anchors-15-Pack-11013/100025194
@douglasmain5452 Жыл бұрын
@@RogueWrenching Good work. I too am doing DIY RV gate with new block column. The question I cannot find an answer to is... How long did you wait for the mortar to cure inside the column before you drill the holes and installed anchors? Thanks!
@RogueWrenching Жыл бұрын
@Douglas Main Most importantly, I filled the column with rebar reinforced concrete, NOT mortar, I waited 7 days. Most industrial applications tell you 28 days, but if memory serves, you're at like 80% strength in 7 days.
@douglasmain5452 Жыл бұрын
@@RogueWrenching I appreciate the quick response. The column I took down held a 44" man gate and that was filled with "mortar", which I believe to just be Portland cement. You used the same stuff that you used for the footer? I too reinforced with rebar
@RogueWrenching Жыл бұрын
@Douglas Main yes I used 3000 psi concrete for the footer and the column
@almfoto10 ай бұрын
Man... I never treated my Integra that way...
@RogueWrenching8 ай бұрын
Dude I had a 6.0 Powerstroke engine block in it yesterday.
@rudyrivera52563 жыл бұрын
🤙🏻🤙🏻
@bertyboy23973 жыл бұрын
All the work on the mortar shown, and nothing but a few welds on the actual gate. 👎
@RogueWrenching3 жыл бұрын
Honestly it was way to much to pack into one video. This was one of my first videos I made. I'm building a gate for a neighbor in the next month or so and I'll show a lot more of the construction on that one. The mortar... Yea. My first time doing it. It was terrible. That's why I didn't show much.
@olderolderman46038 ай бұрын
Home Depot day labor 😁 😅
@RogueWrenching4 ай бұрын
I mean sure if you got that kind of cash.
@vincei21472 жыл бұрын
Come do mine. xD
@RogueWrenching2 жыл бұрын
I do build these for hire in the Phoenix area,my email is over on my channel page of you're serious about having one built.
@vincei21472 жыл бұрын
@@RogueWrenching Am not seeing it, also on mobile.
@RogueWrenching2 жыл бұрын
You'll have to use the desktop site, go to the about section and click the "for business inquiries"