Sculpting for Complete Beginners! (Blender Tutorial)

  Рет қаралды 25,390

Ryan King Art

Ryan King Art

Күн бұрын

Пікірлер: 91
@RyanKingArt
@RyanKingArt 2 ай бұрын
*Help Support the Channel:* • Patreon: www.patreon.com/ryankingart • Gumroad: ryankingart.gumroad.com/ • KZbin Memberships: kzbin.infojoin
@andreagosto
@andreagosto 3 күн бұрын
Thank you so much, your tutorials are very beautiful, very funny and, above all, very effective. These are 54 minutes of incredible density and detail on Blender!
@JacobdelaRosa
@JacobdelaRosa 2 ай бұрын
Sculpting is so OP in Blender love to see this tutorial
@RyanKingArt
@RyanKingArt 2 ай бұрын
👍‍
@av.yana_
@av.yana_ 2 ай бұрын
Thank you soo much!🙏I'll be following your wonderful tutorials. Everything is so easy and clear with you!🍀
@RyanKingArt
@RyanKingArt 2 ай бұрын
glad you liked the video
@andreagosto
@andreagosto 3 күн бұрын
I fully agree
@rudolfkaizer44
@rudolfkaizer44 2 ай бұрын
Just finished this and turned out great ! Really liked the knowledge i gained. Gonna Try a Dinosaur tommorow !
@RyanKingArt
@RyanKingArt 2 ай бұрын
thanks for watching!
@alexandrearaujo4256
@alexandrearaujo4256 2 ай бұрын
Greetings from Brasil. Amazing tutorial, very handy and easy toi follow. I had a lot of doubts and questions about sculpting and almost all of them are no more. Thank´s a lot,
@RyanKingArt
@RyanKingArt 2 ай бұрын
Glad it was helpful!
@davidcheng3573
@davidcheng3573 29 күн бұрын
great tutorial!
@RyanKingArt
@RyanKingArt 28 күн бұрын
Thanks!
@Olivsartz
@Olivsartz 2 ай бұрын
Just when I'm getting into sculpting, perfect timing
@RyanKingArt
@RyanKingArt 2 ай бұрын
hope the tutorial is helpful
@JBBen345
@JBBen345 2 ай бұрын
Such ultimate tutorial for beginners, I found this helpful
@RyanKingArt
@RyanKingArt 2 ай бұрын
Glad it was helpful!
@lucasalmeida7951
@lucasalmeida7951 2 ай бұрын
dude, I LOVE your tutorials. Jeez. THANK YOU!
@graphskill850
@graphskill850 2 ай бұрын
Simple and clear, Thank you so much 👍
@RyanKingArt
@RyanKingArt 2 ай бұрын
You are welcome!
@Leboone_Lipoone_Studio
@Leboone_Lipoone_Studio 2 ай бұрын
Very pretty.
@RyanKingArt
@RyanKingArt 2 ай бұрын
thanks!
@_retep_
@_retep_ 2 ай бұрын
Thank you very much!!! I like this tutorial! :D
@RyanKingArt
@RyanKingArt 2 ай бұрын
You're welcome!
@Everett-xe3eg
@Everett-xe3eg 2 ай бұрын
Thank you! Your videos always give me inspiration to continue learning this fantastic tool. -- Not gonna lie, laughed my ass off during the dyntopo chapter.
@RyanKingArt
@RyanKingArt 2 ай бұрын
👍‍
@ohbegitu5045
@ohbegitu5045 2 ай бұрын
thank for the tut!! there's a lot sculpting tuts out there. but I can understand more while u are the one who teach. Retopology come next pls👌🔥🔥🔥
@RyanKingArt
@RyanKingArt 2 ай бұрын
Thanks! I already have a Retopology for beginners tutorial.
@udderlynfts
@udderlynfts 2 ай бұрын
Link?? ​@@RyanKingArt
@RyanKingArt
@RyanKingArt 2 ай бұрын
@@udderlynfts just type in: Retopology for beginners Ryan King Art
@capitanlopez1
@capitanlopez1 Ай бұрын
Grandísimo tutorial como siempre.
@RyanKingArt
@RyanKingArt Ай бұрын
thanks!
@vivektyagi6848
@vivektyagi6848 2 ай бұрын
Awesome. Many Thanks. How can you create the Mouth Opening in this fish and fit in a jaw with teeth. Can that please be the subject of your next video.
@RKSKP_ImRukachief
@RKSKP_ImRukachief 2 ай бұрын
10/10 super! Thank you!
@RyanKingArt
@RyanKingArt 2 ай бұрын
You're welcome!
@_Atomic_Baby
@_Atomic_Baby Ай бұрын
In Blender, you're like the Harley-Davidson of the motorcycle world =) Thanks so much)))
@RyanKingArt
@RyanKingArt Ай бұрын
thanks
@Tomy_Yon
@Tomy_Yon 2 ай бұрын
It's almost a year ago that I started to learn Blender. I know that because the first tutorial on Blender I saw was Ryan's christmas lights geometry nodes video. 😊 🎄
@eliasb8
@eliasb8 2 ай бұрын
Ryan King, you are the BOB ROSS of Blender!! I could watch you teaching Blender all day!! Just say that you had a "Happy accident" on your next video, and you will see the response in the comments!! 😄
@freezybean3350
@freezybean3350 2 ай бұрын
My man 👏🏻 gracing us with another amazing tutorial. Thank you so much Ryan, you're the best ❤ Edit: Would it be possible to show how to manually Remesh this fish to use as a game asset?
@RyanKingArt
@RyanKingArt 2 ай бұрын
You can check out my Retopology for beginners tutorial.
@tommycruz39
@tommycruz39 Ай бұрын
If anyone else had a problem with the radius being an oval shape instead of a circle when sculpting you need to go to object mode Ctrl+a on the object and select scale and that should fix it
@RyanKingArt
@RyanKingArt Ай бұрын
Yes! Apply the scale if the brush is stretched 👍‍
@TheRareOcelot
@TheRareOcelot 2 ай бұрын
I actually bought a drawing tablet before I got very interested in 3d so I can finally use it lol
@RyanKingArt
@RyanKingArt 2 ай бұрын
Cool!
@mickehog76
@mickehog76 2 ай бұрын
This video is fishy 🤪. Sorry I couldn't resist 😂. I love it! Great work ❤
@RyanKingArt
@RyanKingArt 2 ай бұрын
😂
@LifeAreAmazing
@LifeAreAmazing 2 ай бұрын
Thanks you
@dertobbe1176
@dertobbe1176 2 ай бұрын
Hey ryan I got a special question since you are a professional. I want to make geo node curves with hard corners. Like a wall generator. The problem is, when the curve is not a "curve settings > u-circle" aka a seamlessly closed shape, it will deform the 2 endpoints. Try a easy example: make a cube, delete one vertex so ou have a 90 degree shape. Convert to curve and give it a Profile curve to shape a simple wall. You will notice that the endpoints will be strechted because of the rotation of the Center vertex. If you close the curve you will see that the shape is even but it's small er that the original Profile. So... How to fix this? I just want to allign the Profile to the curve without any deformation to make a very basic wall generator. Could you help here?
@JustinWrt
@JustinWrt 2 күн бұрын
Why is your left-hand side toolbar twice as populous as mine? I also noticed instead of "Draw" right above it, yours shows "SculptDraw" - is that related to the difference I'm noticing? Thank you!
@Mister.Paradox
@Mister.Paradox Күн бұрын
This is because of the new update. Version 4.3 changed the sculpting part alot, added new brushes. He's using 4.2
@MillaZhab
@MillaZhab 14 күн бұрын
Thanks for a good tutorial My question. 48.43 I'm take brush+color, start do main color for a fish and blender show me "You not supported in dynamic topology mode" What is it mean?
@MillaZhab
@MillaZhab 11 күн бұрын
nead deactivate dyntopo
@CinemaAnimation1402
@CinemaAnimation1402 2 ай бұрын
خیلی ممنون
@RyanKingArt
@RyanKingArt 2 ай бұрын
welcome!
@trasadochristopher9800
@trasadochristopher9800 2 ай бұрын
yes this time is for sculp this is also so hard for m
@RyanKingArt
@RyanKingArt 2 ай бұрын
hope you like it
@Mr.Sunshine2023
@Mr.Sunshine2023 2 ай бұрын
@@RyanKingArt I'm game dev developer, I suck at this type of work (artist), but like results, you are good at explaining. Thanks for your work.
@genericgoon7784
@genericgoon7784 2 ай бұрын
It's better than the head one. My head was a disaster.
@RyanKingArt
@RyanKingArt 2 ай бұрын
Ahh yeah
@extrainfoislamic6553
@extrainfoislamic6553 2 ай бұрын
Nice and Nice
@RyanKingArt
@RyanKingArt 2 ай бұрын
Thanks
@skyeblue6834
@skyeblue6834 2 ай бұрын
I love your tutorials this one is very good except why do we need to add loop cuts?? how would I know when to do a loop cut?? how do I know when to do an inset?? I have many questions!!!! sadly Im still bad in blender!! Ive been on it for 3 yrs and still cant do much (need more practice I think) I love trying to make my own mesh I dont want to use anyone elses but blender as great as it is its hard to learn I get what looks like holes in the mesh etc but have no clue how to correct stuff this is the biggest issue or the mesh just looks bad when adding a sub division modifier to a cylinder it gets horrid on the top and bottom it has strange shapes in the mesh so i give up cos no idea how to make it all right or in sculpt I have bits on the mesh I dont want do I just keep trying to flatten the bits till all gone cos then Im left with tiny pointy things I cant get rid of lol 3yrs!!! and still havent figured things out 🤔🙂maybe a tutorial on common beginner issues with meshes and how to fix??? if you havent already done one would be very useful and I would be very very very grateful to learn from you I dont want to have to keep looking at others youtube vids cos that gets confusing I want to stick with one person but trying to find that one person who explains why and when we need to use loop cuts and inset, etc would be very good lol its all fun!!!😄once I know this then I might be able to actually make a more complex mesh like a vintage sofa with a carved wooden frame all by myself!! 😆😆😆you're the best thank you so much for this vid I have made something at long last!!!!! omg I cant believe it its not a fish its a 1980's space hopper lol
@RyanKingArt
@RyanKingArt 2 ай бұрын
maybe you should watch my blender for complete beginners tutorial series, or do some practice 3d modeling tutorials first.
@_Atomic_Baby
@_Atomic_Baby Ай бұрын
yes, I removed that video))) thanks for writing)
@RyanKingArt
@RyanKingArt Ай бұрын
Thank you
@Almsoo7
@Almsoo7 Ай бұрын
If you do not see your paint, save your work and restart Blender. It worked for me, I think it got to do with insufficient memory.
@3d-marabu
@3d-marabu 2 ай бұрын
I just ordered a Gaomon S620 pen tablet with a 4-button pen so that I can take part in your workshops better. According to the manufacturer, the tablet is also suitable for Blender. 😉
@RyanKingArt
@RyanKingArt 2 ай бұрын
Nice!
@ERRORMAN999
@ERRORMAN999 15 күн бұрын
When I do this the eye sockets become angular 34:54
@3d-marabu
@3d-marabu 2 ай бұрын
oh that's a cute little fish 🫠
@RyanKingArt
@RyanKingArt 2 ай бұрын
thanks!
@mariacecilia432
@mariacecilia432 2 ай бұрын
First 🎉🎉🎉
@RyanKingArt
@RyanKingArt 2 ай бұрын
Nice!
@Beehive66
@Beehive66 Ай бұрын
I thought 'R' key was rotate? not remesh.
@RyanKingArt
@RyanKingArt Ай бұрын
When your in Sculpt Mode, R Changes the Remesh Size. But in Edit or Object Mode, it Rotates.
@Beehive66
@Beehive66 Ай бұрын
@@RyanKingArt Thanks Ryan. Appreciated
@strypercritical
@strypercritical 13 күн бұрын
Shift+R is what worked for me
@calmarcalmar
@calmarcalmar 2 ай бұрын
so far so very good.. but.. what the fuck ist that ctrl-2?? on 22:50 ?? I instead had to add an modifier called like that: subdivision surface. Ctrl-2? Ctrl+ 2w? I don't get it.
@RyanKingArt
@RyanKingArt 2 ай бұрын
Hold down the control Key, and press the 2 button on the top of the keyboard. that adds the subdivision surface modifier to the selected object
@calmarcalmar
@calmarcalmar 2 ай бұрын
@@RyanKingArt thx for the kind reply.. but it does not. 4.2.2 I have. Neither that works on 4.3 Well going through troubles .. you learn also alot. Still.... BTW: I figured out: when there are long videos, and since beginners need to scroll back a lot.. because it goes so extremely fast (while you are relatively OK) .. shorter videos are easier to navigate - at least with the mouse. (maybe I should try some other method to get back controlled - a yes, the arrow-keys could work great.. ). so thanks again for you great videos and anyway
@calmarcalmar
@calmarcalmar 2 ай бұрын
@@RyanKingArt Actually in the 'keymap' - it states: Subdivision set: Ctrl [0-5] ... but ..let's change the keyboard... EDIT: the same.. ah well.. then.. so be it..
@calmarcalmar
@calmarcalmar 2 ай бұрын
On a colleague PC it works too. So sorry for it. Somehow it's my PC and on GNU/Linux.
@nadima1773
@nadima1773 13 күн бұрын
THIS PART IS SOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO FRUSTRATING 39:39
@Omnivoid22
@Omnivoid22 23 күн бұрын
48 dollars for that course? nah son. i got one for 10 on udemy.
@ex0dus40
@ex0dus40 6 күн бұрын
Beginners??????
@RyanKingArt
@RyanKingArt 6 күн бұрын
yes its for beginners
@VioFax
@VioFax 2 ай бұрын
I wish i had got better at this before AI... Now its prety hard to want to do all this tedious stuff...For one image when i could spend the same amount of work and have an entire virtual assisted artist living in my PC...
@RyanKingArt
@RyanKingArt 2 ай бұрын
Seems like a lot of people are talking about this, but personally, I don't find any enjoyment in just generating AI images. What's the point of it? You can't even call it your own artwork, because you didn't even make it. I enjoy the process of creating art myself. So I will always continue to make art. Creating artwork is why I enjoy it. You aren't an artist just by telling an algorithm to generate something.
@Wayneawebb
@Wayneawebb 2 ай бұрын
Not even 5 minutes in & the word SCULPT is making me nauseous. are KZbin paying you every time you use that word LOL... Having said that, Great tut.
New Sculpting Brushes Added in Blender 4.3!
14:44
Ryan King Art
Рет қаралды 26 М.
28 Tips to BOOST Sculpting in Blender #b3d #sculpting
49:47
CG Boost
Рет қаралды 74 М.
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН
Everything Blender can do in one video
12:48
blendereverything
Рет қаралды 387 М.
Blender 4.3 Features in LESS THAN FIVE MINUTES!
5:25
SouthernShotty
Рет қаралды 144 М.
How to Have More Fun Creating 3D Characters in Blender
26:52
CG Boost
Рет қаралды 18 М.
Blender is Changing Animation Forever
11:11
Smeaf
Рет қаралды 211 М.
Create Your Own Sculpting Brushes in Blender 4.3 🖌️ (Tutorial)
13:15
Retopology for Beginners (Blender Tutorial)
21:52
Ryan King Art
Рет қаралды 36 М.
The Animation YOU Can't Stop Watching | Blender Tutorial
14:48
Which Sculpting Technique is Better in Blender?
4:02
Noggi
Рет қаралды 134 М.
I Remade Avatar Water VFX in 100 Hours
11:38
ErikDoesVFX
Рет қаралды 2,5 МЛН
How to start sculpting in Blender with a tablet
1:08:27
SpeedChar
Рет қаралды 604 М.
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН