How to Make Cap / Squish Dice Molds

This video goes over how to make a single cap/squish mold for a full set of dice! The first 1000 people to use this link will get a 2 month free trial of Skillshare Premium Membership: skl.sh/rybonator5
This video was sponsored by Skillshare!
Support the channel and earn some amazing perks on Patreon! / rybonator
Join the Dice Goblin Discord! / discord
If you like twitter, I got one! / rybonator1
I also have an Instagram! / dm_rybonator
Check out the amazing 4 dice makers who helped show me this "1 full set in a single mold" cap method from the video. They are awesome people who chose to share this technique with others and help the community, so share the love!
Dalvan Dice - / dalavandice
Dicey_Encounters - / dicey_encounters
Moonbeammenagerie - / moonbeammenagerie
Paradice.Made - / paradice.made
While I may not have gotten 3 fully unbubbled sets, I think all 3 sets are pretty cool looking! Though I do have to say, that spectral teal/blue/green set is definitely my favorite. Going to be making a few more of those for my ghostly armies in the future :)
Let me know what color I should ink these dice! Or if you think I should stop showing un-inked dice, let me know that too haha.
AMAZON AFFILIATE LINKS TO THE PRODUCTS I USE IN THE VIDEO (I get s small % kickback for purchases you make, at no cost to you :). Thanks for using these, but don't feel obligated. )
Slow 15 Silicone (Cheaper than the others, but not transparent, so harder to see what you are doing.) amzn.to/2Yw5GpQ
Dragon Skin Silicone (More durable than the others, but more expensive.) amzn.to/2Apx8xD
Sorta Clear 37 (Not the exact same as 12, a bit more rigid.) amzn.to/3e06uJT
Envirotex Lite Resin: amzn.to/3ep4Txu (Available in gallon purchases as well.)
Pearlex Powders: amzn.to/2PWWBSP
Alcohol Ink: amzn.to/2YLeisi
Liquid Glitter: amzn.to/2NOTonZ
Imitation Gold Foil: amzn.to/2UtgV1z
If you have any ideas for what you would like to see built/reviewed in the future, let me know in the comments down below! Then subscribe so you don't miss any new videos coming out in the future! Also, if you liked this, gimme that sweet sweet like.
MUSIC:
"Summer Groove" by Rogue
• "Summer Groove" Future...
• "Renaissance Period" "...
"Renaissance Period" "Music For KZbin Videos" "Royalty Free Music"
Resin Safety Data Sheet: cdn.shopify.com/s/files/1/121...

[@pingpongwarlord618]

I literally searched youtube yesterday to find how people make squish molds. Get out of my head.

[@Rybonator]

Don't tell me what the next thing you are looking for is, I'll try and guess :P

[@jessicaalyse7]

Haha same here!

[@biancabrooks280]

Rybonator has his finger on the pulse yo!

[@Alex-pp8zs]

Me: *has no materials to make dice* Also me at 3am on a binge: InTeRsTiNg

[@simpson6700]

no materials, let alone the pressure pot and/or vacuum chamber.

[@billyfraiser6298]

I think videos like this are meant more to be interesting than actually useful. I'm sure there's some useful information in the video to a few people...... but yeah, anyone with all these materials to make the dice, probably (pretty much guaranteed) already know how to make the dice lol. And thus do not need a video like this. Videos like this are more for people who just want to see, rather than actual learn (to do). but like I said, I'm sure there's a few key points in here that someone might learn something from (in order to do).

[@alexbevan2183]

billy fraiser your not wrong this is enjoyable content however I don’t think your entirely right either, I think this video and many others are perfect examples of how to make great dice and for someone who is a beginner dice goblin who has just bought a vacuum chamber/pressure pot and that it’s more of an online demo video. I’m not saying your wrong I just think that it’s aimed more towards beginner dice makers and hobbyists that already have accessibility to things like the vacuums chambers/ pressure pots and the materials can just be purchased cheaply if not already owned.

[@danielribeiro1433]

you are not alone on that

[@Rybonator]

That's how the hunger starts... haha :) I watched Peter Brown's Resin videos for years before I pulled the trigger and tried my own thing - Happened to be making dice :)

[@raeluh5938]

me: *has never played a real game of d&d* ah yes a beautiful d20 *chefs kiss* how beautiful

[@Rybonator]

Much like a wine connoisseur never truly drinks wine, you must admire dnd from afar!

[@zachblair3794]

I relate. The first time I “played” d&d with some friends through text (we were all uncomfortable FTing or voice calling) it went horribly. So now I watch a bunch of d&d podcasts and vids like Rybonator’s

[@avas.5914]

Same

[@katisepicXD]

me: *has played a real game of dnd* ah yes a beautiful d20 *chefs kiss* how beautiful

[@DerekBlundellMusic]

You used a pressure pot to set these molds. Previously, I saw you use a vacuum chamber I think? Is a pressure pot the better 'go to' for molds? Thanks a lot for everything you do! :-)

[@jennythomas6455]

"easy transition tO SKILL SHARE NAILED IT" 😂😂😂😂😂

[@Rybonator]

When you're this good at transitions, you just gotta call it out :)

[@brunocharbonneau5272]

@@Rybonator you're getting as good as transition as you are at opening puns, which I feel are great!

[@unlikely.charlieyt4132]

The bubbly dice could be a great intimidation tactic, you just. Crush a die at the table

[@Rybonator]

"You dare to roll a 20?!" Squish.

[@dreadpiratewest6058]

Dragon Scale dice! Yes, fragile, but... Still cool looking!

[@mkmasterthreesixfive]

@@dreadpiratewest6058 Should totally do the snake skin mold with an outer layer of clear resin to make it stronk

[@cogmonocle2140]

I'm imagining making candy dice with this texture and just CHOMPING it when you roll poorly

[@iamaunicorn1232]

Naughty players are forced to use the cheese dice.

[@symneoart]

Those puns in the beginning are always gold

[@caseolum]

Each set of puns tops the last

[@Rybonator]

The Pun Counter needs to be a permanent feature

[@lililuminous8234]

They're more painful that CNN Student News

[@vivixion]

@@lililuminous8234 oh wow, I haven't heard that name in years... **violent pun flashbacks**

[@tinkrtailr]

Kintsugi That's the Japanese gold pottery thing you were talking about

[@Rybonator]

That's the word! :)

[@talitaoliveira6543]

Being honest, the bronze/Gold bubbled dice were mesmerizing to me... Imagining an avatar going "you have no luck left for you" while he crumbles these dice in front of the player... (man, I'm overdramatic today)

[@plumeria1985]

You roll your hit die for short rests, but each die you roll gets evicerated before you

[@kylerose6209]

man imagine taking those dice and then filling it with more resin then putting it in the pressure pot

[@foxl0res]

I don’t even make dice I just like looking at things being poured

[@Rybonator]

Totally tempted to do a dice asmr style vid haha.

[@foxl0res]

Rybonator if you do that I would LOSE my MIND

[@Amphibian42]

@@Rybonator "and now for the roll test" proceeds to roll dice for 5 minutes and writing results down to check balance

[@luciver3222]

the puns keep getting worse... i love it

[@Rybonator]

I have only BEGUN to pun...

[@stopmotionmaster5933]

Even puns in the comment (this comment should have been a pub of Some sort but I couldnt think off one...

[@lawnytoast7399]

Love the "Chef's Kiss" and "Woooo! Baby!" moments. You crack me up m8. You inspire me dice-daddy.

[@Rybonator]

Glad to inspire you dice-child? Sounds wrong. Let's keep Dice Goblin :)

[@monkey3171]

I think dice-daddy is my new favourite hauntingly creepy nickname

[@bowie.90]

I've never had a reaction like that, but I've had good results after using a hot water bath for my resin first, mixing the resin in a hot water bath, and then leaving the cap off for a short time to pop surface bubbles before putting the lid on. I'm no expert, it's only thanks to Rybonator that I have handmade dice period, but I've been desperately trying anything I can to get relatively bubble free dice without throwing down several hundred dollars on a pressure pot and air compressor

[@jordanrijsdijk5496]

“To skill share baby, wooo nailed it!”

[@Rybonator]

When you nail it that hard, you gotta call it out!

[@orestesbastos]

Reminds me of Dunkey talking about Knack

[@nataliawhite9020]

Haha “CAPtivate”. Haha get it. Cuz he’s teaching us cap molds 😂😂😂 Ahhhh I love puns. They’re DICEirable.

[@Rybonator]

That was pretty punny Natalia!

[@nataliawhite9020]

Rybonator I try 💁🏻‍♀️😂😂😂

[@Benjami.n567]

Ohh, I love the idea of making dice from a scene in a movie or show. I’d definitely buy a stargate sg1 set of dice.

[@Rybonator]

Need to make a pulling of the master sword dice set then :)

[@AntonioHernandez-xl3il]

The Ferrero Rocher containers sound perfect for this.

[@Rybonator]

That's an awesome idea!

[@AntonioHernandez-xl3il]

Rybonator a sugary treat and different sized containers for other things. Win win

[@ciennarose007]

ThatS what I thought it was at first! Lol

[@Masterkeyblade01]

I used that, it's great!!!

[@TheBaconWizard]

Mmmmm, yes, let me just go-out and get a box of Ferrero Rocher and EAT DEM!!!! Sacrifices must be made :D

[@AnonOmis1000]

-"Dragon Skin" - very durable - Thiccc I think I know the original purpose of this product, lol.

[@Rybonator]

Squishy Dice... right? ... right :(

[@AnonOmis1000]

@@Rybonator ( ͡° ͜ʖ ͡°)

[@TheLadyloin]

I mean, it's not bad

[@VaalanHei]

I mean, a fine product such as this can't come from a bad dragon right?

[@sdtwirix1126]

@@Rybonator I was thinking stim toys in general, but yeah. I mean, even a ball or tube that could by squashed or stretched would be handy for neuro-atypical people. Yeah, that's the most likely intended use.

[@brunocharbonneau5272]

Me: I think I'll try cap molds next time... KZbin: Rybonator has uploaded a new video, How to make cap/squish molds Thank you!

[@EchoNoctua]

This is it. This is the video that is making me want to try to make dice.

[@Rybonator]

Boom! Finally got ya :)

[@jakobfranklin8169]

I've been experimenting on how to make a mold like this. I'm so glad to have another example!

[@Rybonator]

Thanks to the 4 who brought it to my attention! :)

[@Dawnstreem5]

just wanted to drop a comment and say you're the reason I got into dice making and just wanted to thank you for all your tutorials and positive vibes. Hope you and your wife are doing well!

[@jeremyaldorfer8350]

been using this style of mold for a while and whenever I asked a question online people would always tell me I needed a sprue. thank you so much for confirming that I don't need one

[@Rybonator]

Both methods are totally usable :)

[@tiago3275]

do i really need a pressure pot for this one?

[@Mystical.Eclipse]

“Pastie white boy” I thought you were a dice goblin?! I do love your content though!

[@Rybonator]

Pasty white boi... goblin. Am a goblin boi

[@martjanamoon1785]

your jokes are terrible i love it

[@Rybonator]

I am to please/displease :)

[@martjanamoon1785]

@@Rybonator 💖

[@WittyPractitioner]

Great video as usual! Also I rewatched your die hard dice review and decided to finally get some sets last night (and I mentioned you of course). Can't wait for them to come in and see what I get as a freebie, thank you for the recommendation!

[@avivhirsch2709]

I honestly love the bubble effect, I wonder if you could try to stabilize them with clear resin so they keep the texture but are stronger and have a smooth surface?

[@Watchers_Puppet]

Now this is quality content I'm looking for.

[@Rybonator]

Glad you like what I do :)

[@katherineemiller8340]

Love the channel

[@leocruor9650]

I've been wanting skillshare for awhile and I snagged one of the 2 months thank to you

[@nicholassels7411]

I made a mold like this after seeing this video, I have used it to make several sets now and it is fantastic! It even saves on resin use.

[@jennythomas6455]

All jokes aside, I LOVE watching you learn new things and learning this stuff with you. So freaking awesome, I love how REAL you and your content are.

[@jennythomas6455]

ALSO INK THEM SILVER! Or a pearly white

[@Rybonator]

I'll keep being real if you keep being REAL AWESOME! Thanks for the super sweet comment :)

[@jackfriend6559]

Perfect! I just bought my first silicon mold mix and this method will definitely save some money too!

[@vault_111]

Have you thought of making one of the "snake skin" sets then giving them a second coat to harden them? Just thought they looked pretty awesome

[@Rybonator]

It would be hard to do, but not impossible. Though you would probably lose 99% of the snakeskin look as soon as other resin touches it.

[@Mirhaus]

@@Rybonator That's a shame, a snakeskin/scaly dice set could be really cool for any kind of reptilian character.

[@KyleneeBoBeanie]

Oh, wow! I'm giddy again!! The pottery wheel for easier sanding was an unattainable dream for me, but this is another option! I love the look of totally sanded and polished dice, but I'll just be happy to make them again! My crying joints thank you!!!! ❤️❤️

[@Katiebug1978]

I just found your channel a couple of weeks ago while looking up dice molding. I binge watched all of your videos in a couple of days while I worked on my own craft projects. You've really inspired me! I love that you use many tools and supplies that I can find at my local store. I'm about to try my hand at the wooden dice box/tray. I'm a little nervous to jump into the dice casting with the cost of resin. I've only done some health potions for my group a couple of months back. They came out mostly ok, lol. The guys loved them anyways. Btw, I like that you show unfinished products. You can always do an unfinished then finished side by side at the end. Like one of those before and after pics.

[@moonbeammenagerie6914]

Yay! They turned out amazing, thank you for the shout

[@Rybonator]

Of course! Thank YOU for letting me try it out and share it with everyone :)

[@Lu_R]

This is by far my favourite mold! Keep doing good work!

[@eatingbreakfastrocks]

I like how you try to answer to everyone. It really feels like you care about your fanbase and i respect everyone that tries to make everyone happy.

[@Robinheiminge]

Your uploads are always a highlight of my day

[@Rybonator]

Aww thank you :) Glad you like what I do!

[@maimaim.1341]

I love Rybonator's intros so much. They make my day a thousand nat 20s better

[@Rybonator]

This made MAI day ;D Thanks Mai!

[@maimaim.1341]

@@Rybonator HA! I see what you did there

[@SerenAananai]

I work with resin alot myself Rybonator, and i find that if you mix the gold leaf in the resin before pouring make them float in place in the resin and disperse more easily. if you want thicker pieces of gold, mix it just alittle just before before pouring, cause the more you mix the leaf (or flakes) the smaller the pieces will be in the resin. it makes it so much easier that mixing it in the mold and looks really pretty.

[@juczer]

I've been thinking how to make a mold like that and boom, here you are with another video! Bless you

[@s.bthomas921]

Seeing this was a great reference! I'm trying to make dice using molding putty but I was unsure how to form the base. Can't wait to see what else you'll create!

[@shizucheese]

Congratulations. I've been following you for about 9 months now, holding off getting into dice making because I don't have a proper work space for crafting yet but will at some point in the (hopefully) near-ish future (and probably would have by now if the pandemic hadn't happened), and I wanted to hold off until that happened. This was the video that broke me. I ordered my pressure pot today.

[@Shaysuddeth]

This is awesome! Thanks so much for the guide!

[@SOSipes]

I just bought a pressure pot and my resin & silicone should be here next week. I'm excited to try this method.

[@RyleyJLL]

This had given me ideas for the future! Thanks!

[@Rybonator]

Can't wait to see what you make!

[@shanharlmall]

Craftsman got me started with this stuff. And you fill in the technique gaps I wonder about. TY and keep it up!

[@Rybonator]

I am INSANELY honored to be considered amongst the Crafsman :) Thanks Shane!

[@Specter2197]

Galaxy dice would look amazing with rose gold if you have something like that!

[@Rybonator]

Oh yeah totally! I might do that :)

[@Joleneeeeee]

These videos are always so comforting :’) your voice is amazing for killing me to sleep. I can’t wait to buy a pressure pot and start making my own dice!!

[@Rybonator]

These comments always make me smile :) I have some creators that I LOVE watching while I fall asleep, so I feel honored to be included. :)

[@Joleneeeeee]

Rybonator I never would’ve thought you’d reply omg!! Thank you so much for putting out videos so regularly, they’re great for helping me relax and stay entertained!!

[@n00bCruncher]

Eyy hyped for the new video

[@Rybonator]

Hope it didn't disappoint!

[@laurahayden215]

I've used an offset spatula to get the silicone out of hard plastic molds like that! It made it a ton easier!!

[@Rybonator]

Genius! Thanks Laura :)

[@samumapache]

(Sorry for typos or grammar errors, english is no my first language) I found this video just randomly a little time ago (less than a week), now I have my own handmade silicone cap molds and today my resin and my alcohol ink are arriving home. Sir, you just awake a new dice goblin, so I can only say thank you.

[@frea_o]

I just finished my squish mold using this tutorial (used a ferrero roche container, thanks to the comments) and without thinking about it, I poured exactly the same petri method dice down to the same color of alcohol ink. Won't know how they turn out until tomorrow. Thanks for this video!!

[@eddvcr598]

The clear with real swirl is my absolute favorite. The dice look like crystals; they’re _so_ gorgeous.

[@jessicawells4149]

Absolutely love it!

[@Rybonator]

Glad you liked it :)

[@MageRights]

I really like the idea of more 'every frame a painting'; would love to see your fav shows or movies and your interpretations of them.

[@geekwitchnails]

Cool. The final ones look great

[@baileyblanchard8480]

I am really grateful I've found your channel, everyone is so secretive about dice making how to. With how up front you are about each of these skills, I've found it an amazing resource. I've made my own molds now, learned l like 10 different ways to make amazing effects, and the puns at the beginning always make me laugh. Honestly, without your videos I never would have been able to make the dice sets special for our D&D table. Thank you so much!

[@Rybonator]

Of course my friend! I am glad that I was able to help you out in some way :) I'd also recommend checking out the dice making discoveries facebook group, as there is a large bunch of people on there that are willing to help as well!

[@baileyblanchard8480]

@@Rybonator that's amazing! I will totally check them out! Thank you! I think expression of gratitude is really important, and for saving me probably hundreds of hours, is definitely something to be grateful for! Keep up the amazing videos

[@piari5321]

I just removed a set of dice from my cap mold and they came out awesome! I don't have a pressure pot so i pay attention to my stirring/mixing technique and with this mold I got a set of almost bubble free dice. Inly the D6 and D10 have a small bubble in the top but its totally fixable. BTW thank you so much for your great, informative and entertaining videos! I learned so much and I really enjoy watching them over and over again.

[@soup_souls]

ive been planning on starting to make dice and youve helped me understand so much. thank you!

[@aphelion4616]

With the spectral set, to keep with the "Lich King" vibe, i would to it like a dark gunmetal color (or similar) to represent his armor.

[@Rybonator]

Oh totally! I need me a full frostmorne-esque set :)

[@hcgkimmie]

great video. I love your commentary.

[@WerSonst95]

Awesome. Thanks for sharing, if I will ever get my hands on all the equipment, I will try this method i think :D

[@Rybonator]

It's a great starter method to be sure!

[@bloodytails777]

Cant wait to try this out :)

[@MouseyPeach]

My resin goals absolutely involve putting stuff in dice so this method is perfect for what I want! Now I know exactly what materials I should actually invest in! :) I also have so little desire to clean up dice haha 😂 And a rose gold would look great on the green set!

[@Defahn]

Good timing! I'm going to be making new molds soon and was thinking about doing cap molds! I was thinking of using a reservoir in the cap for mine, I don't mind trimming the sprue and I want to make sure there's enough resin for it to work with

[@ClockworkOwle]

Hey Rybonator, love the videos! I love how easily they show what you're doing and why, and I appreciate the fact you show failures as well and explain why it happens and how to fix it. You inspired me to try my hand at dice making, as it's something I've wanted to do for a long time now. Math click clack rocks pretty and I want to make some. I learned how to use Blender to make my own dice with my own font drawn by hand, and once they're all done I'm going to have them 3D printed. Can't do it myself because I don't have a 3D printer and there's none available for public use near me lol. Hoping they turn out as great as yours! Once quarantine is over, I plan on looking for a DnD group to play my first real game using the dice I create. Also, you said that the liquid glitter was sold out, but it only seems to be sold out on Amazon. I found it still for sale on sites like Hobby Lobby and Blick Art Materials for about $5. :)

[@Magikarp_king]

I would love to see a video where you try out different types of resin and let us know which ones work best. I know you love art and glow but it's awesome to see other brands and how they work.

[@logandarkhorse3377]

JUST AWESOME THANK YOU

[@VaalanHei]

One of these days I will make my own dice, but until then I'll just keep on soaking up information from you o great Goblin Shepard! Also I love the puns :D

[@Spicymango04]

The perfect channel for dice goblins

[@Rybonator]

That's what we be after all :)

[@mathieudebibikoff4369]

your video stayed in my top recomanded for like 3 days straight, it's either cuz I binge watched lods of your older videos recently, either the youtube algorithm just really liked it XD I think it was a bit of both XD I've watched so many vids of you I needed a break from dices XD but the algorithm kept insisting, so I was like huh fine, and clicked XDDD

[@davidlove236]

Nailed the SkillShare transition!

[@TetherOnline]

I have been meaning to make some new molds down the road, might just try this out honestly. Also for those who can't get liquid glitter, like myself because Amazon sellers are insane with the prices, I found that certain nail polishes that only have a glitter like effect works pretty good. One warning tho, I would recommend using mold release before using them, some of the older molds had all the numbers pulled out of them because the nail polish dried them out allot more then I thought they would, which is fine since they were test molds anyway. They had more problems then solutions so they were bound to letting me test new ideas out when ever they came up.

[@AzuraiFrostwing]

My cap's off to you, you really shone some lid on the process! I'll be sure to top and take notes along the way. Gotta squish all that info into my book for future references :)

[@uwukotoa]

I love your videos so much but your puns at the beginning are always the best part.

[@Vampireangel1011]

gonna have to try this squish/cap mold method. It looks much easier to get pretty looking dice the first go.

[@Alex-fi2co]

I love the green petri swirl set I think they will look amazing inked with gold and metallic green together

[@zalindae]

Ahhhhh so awesome. Gold for the blue cause it's your favorite! Pearly white or like a platinum silver for the gold I love the idea of a bit of a blend of metallic colors there. For the clear and green I think a blend of maybe teal and white or the pearl white paints would be amazing. (As you can tell I like pearl or metallic colors lol) 😂

[@lwolfstar7618]

Your puns never get old, i kinda needed that goofiness tonight. Thanks Rybonator. And that's before the vid has even gotten 1/4 through.

[@neuromancer2709]

Nailed that transition

[@Rybonator]

When you're good you're good.

[@Voiidpriince]

Ok ik this is an older video, but you can put your mixed resin in the pressure pot to pop the bubbles before you pour the dice, it can really minimise them in the end result

[@chloec4127]

YES! I have made anywhere from 2 to 4 different molds for my dice and they all have failed. I can’t wait to try this version

[@arkell7763]

Has anyone been able to get this method to work without a pressure pot? I want to try this for myself, but a pressure pot is way outside of my price range.

[@momoplay351]

Same question here

[@cowlufoo2]

Also wondering

[@karenswanay4750]

I just watched your video on recoloring the numbers on your dice this morning. Back in the day of AD&D we used crayons to fill in the numbers on the dice and change the colors. You just rub the crayon across the number until the wax fills it in and buff the top.

[@oliver1435]

The bubbly ones look really cool to me like i know theyre not useable at all but they have a cool visual texture in my opinion

[@funforall9741]

Have dragon skin coming in tomorrow might try this mold type now. this rocks thank you for the info!

[@PiokoMew]

The green set looks amazing with the kinda clear numbers. Maybe do a frost. Keep it spectral! Also the shake skin set was actually kinda fun, when if you can't use them

[@Cellosis]

Your videos encouraged me to try out dice making so thanks for that. Would a video on how to properly clean/maintain molds be possible in the future?

[@jfunderburk1989]

It would be cool if you could fill the voids in the failed snake skin dice with clear resin to make a snake skin dice set.

[@Zappygunshot]

Sprue molds with removable caps, that sounds very convenient for making full sets like this. If I ever get into making dice, I'll probably use that for a method.

[@maynardmilton2052]

Yessss give the dice goblin some moldsss

[@darkgeargaming1564]

Rybonator I've been on your discord for about a month now learning from all the members there and finding methods that worked for making dice. I've had some success and even learned how to get more out of my 3d printer. I was literally just about to start looking for a method like this and man I'm glad you did it. Could we possibly get a video someday about resin experiments with different types and how they effect inclusions such as opal imitation flakes or ground materials?

[@Rybonator]

It is 100% on my list to tackle :) Hopefully sooner rather than later!

[@darkgeargaming1564]

@@Rybonator My experiments so far have yielded good results with East coast Epoxy brand when the material is vacuumed before pouring. It's so thick with mica flakes and other additives that the amount of air is a bit above what the pressure can adjust for, but it still looks amazing. There is a picture of some of the dice in your discord

[@atomko87]

Damnit now I need a pressure pot lol. Keep up the great videos! Love the dice!

[@Rybonator]

Treat yo self! (it's a lot of fun, just not cheap.) Best of luck if you get started :)

[@okieo2k958]

Another great intro

[@mandaloriandy]

Oh that galaxy set is absolutely *beautiful* I would be willing to pay a ridiculous amount of money for them

[@Rybonator]

Glad you like them :) It's not too hard to make either!

[@zeffi9695]

I think the first two came out particularlly good-looking, discounting the bubbles. Can't wait to see you start doing really goofy stuff with UV resin now that you have your own working squish-mold. Edit: Yea the Guardians set came out pretty good too. I guess I should have waited till the end to make the comment.

[@Rybonator]

Hoping to get better with UV real soon :)

[@amberlynn2996]

I was watching that clip of you using the knife and thought man I would slice my thumb if I cut towards me..... I guess I’m not alone! But I’m definitely going to try this mold method!

[@Rybonator]

I normally have never had an issue, but I pulled a little hard :( Whoops! haha. I will learn nothing from this experience.

[@tntcake6327]

I dont even play dnd im just here cus i like your voice and love the dice

[@Rybonator]

These are some of my favorite comments :) Thank you Abdu!