lovely build. However it was a 17 pounder gun wedged in the turret and the bigger rear box was to house the radio because if it was left in its original position the radio would have been smashed to bits by the recoil of the gun. The additional box on back was a counter wait for the gun.
@jackbruce83094 жыл бұрын
For people complaining about the workable tracks and wheel springs, they're there for extra detail, for example if you wanted to do a diorama featuring the tank rolling over a rock or rail tracks ybe wheels and links will follow the curve if you don't like it then just leave it and move on. You complaining makes RFM likely to revise the kit and take away the tracks and springs meaning less realism and details for the rest of us
@TheSaturnV3 жыл бұрын
A few tips: Glue the idler halves together and give them an extra thorough sanding. The rim portions will go on perfectly. Same with the inner road wheel faces. Just sand them an extra few rounds and they pop right in. Have the transmission section built first, and then in one session build the lower hull as well as the upper hull with sponsons. You’ll be able to align everything perfectly.
@davidharrington11334 ай бұрын
Great kit, a huge amount of work. Set aside a lot of time for the tracks.
@tonyromano62204 ай бұрын
Use narrow masking tape to hold assemblies together then glue. I suspect this kit is super accurate vs Tamiya super kit. 😂😂
@Killsnapz4 жыл бұрын
The bow gun is blocked of on the Firefly because the bow gunners position is used for main gun ammo stowage. The 17 pound rounds were considerable longer than either of the American 75 or 76 mm gun rounds and restricting the ammo load to the standard Sherman positions would have resulted in a very low number of main gun rounds being able to be carried. All Fireflies I have seen have plate armor welded over the bow gun position.
@DavidG623 жыл бұрын
Also the periscopes on co-drivers side should be closed . No one to use them.
@sayeager55593 жыл бұрын
Starting this build today. Tracks first I think. Nice to know I can watch this as I need some help.
@tonyperez47914 жыл бұрын
Great video , I was going to get one , but after seeing the etch and tracks building , , I realized is too much for my hands to handle. (got carpal tunnel ) But it looks like a great kit and love what you done so far , looking forwards to next video ! Take care, Tony
@remcokompier13502 жыл бұрын
The big box on the turret is the radio set
@Dragonblaster13 жыл бұрын
The bogeys look slightly easier than the Tascam version. Which is also all about cramming the bits together. I made the Tascam some years ago, and had to scratch-build one of the swinging arms out of sprue when one pinged away to be eaten by the carpet monster. I was burgled last year, and the burglars knocked the Firefly off its plinth and I think they trod on it. After beefing up the locks and fitting a remote-control electromagnetic lock for my inner front door, and replacing my stolen pool cues and air rifle, I've bought the Ryefield version to add to my stash, which will probably go directly after my Amusing Hobby Centurion Mk 5.
@ytwos14 жыл бұрын
The idlers have the lip overhang, the only way to mold that is in halves. Other kits just skip that. Explained clearly on the box top.
@frankmiller3367 Жыл бұрын
As a American, I can totally tell you that the US does go Crazy with the 50 Calibre Browning LMGS, all though, some sherman Variants such as the M4a1, M4a2 and the M4 Jumbo's had 12.7 HB Browning machine guns. The UK tanks usually had the Vickers, Bren's or the [I think] Besa 7.92 mm's.
@cruzmzuniga84004 жыл бұрын
Very nice and informative. I have the Sherman M4A3E8 and was wondering how I was going to build the tracks. Can wait for part 2.
@willthorson45434 жыл бұрын
The front part of the hull with braces is the transmission cover.
@bobdyer4224 жыл бұрын
Nice start, looks good.
@ytwos14 жыл бұрын
These square things on the hull sides are the mounting points for the arms that kept up the canvas shrouds that enabled these shermans to wade ashore with a bit more confidence on d-day and immediately thereafter.
@mikecooper8462 Жыл бұрын
And the entire front end is the transmission housing/gear box cover. It looks like all the parts go together very well. Excellent build video. Nice an' slow with very good dialog throughout. I'm a new subscriber! 🤙
@ninus172 жыл бұрын
the reason the brits welded armor over the bow gun slot is because the 17pdr ammo was quite big and so in order to store enough of it in the tank to make it viable in combat ( the ready rack having only like 6 or 8 rounds ) the co-driver ( or bow gunner ) position was made into ammo storage
@EMTBonsai4 жыл бұрын
That is nice! Glad I searched for a review now, it's in my hobby shop so now away to pick it up with the mini art Grant!
@byronbenicio78533 жыл бұрын
i guess Im quite off topic but does anybody know a good site to stream new tv shows online?
@EMTBonsai3 жыл бұрын
@@byronbenicio7853 hi mate, if you want you could install an app from the Google play store called FILMZIE you get both films and TV shows and alot of the free movie HD apps are fantastic in the playstore just now! Great quality they remind me of the old Great showbox kinda apps!
@arielfernando39163 жыл бұрын
@Byron Benicio Flixportal :D
@byronbenicio78533 жыл бұрын
@Ariel Fernando thank you, signed up and it seems to work :) Appreciate it !!
@arielfernando39163 жыл бұрын
@Byron Benicio You are welcome =)
@lmmodellismomilitare4 жыл бұрын
Really good model. I find your interesting channel on you tube, I am modelers too. Good
@ytwos14 жыл бұрын
The actual wheels also have a seam in the middle, rubber was vulcanized on from 2 sides. The problem is cleaning up the gate withou destroying the seam line. I indeed usually file them off.
@laszloharsanyi83204 жыл бұрын
Few technical notes to the greatt build video: - transmission gear cover. IRL the cover made up from three pieces and the big "bulges" behind the sprockets were a single cast with the side parts. On the other hand the three parts were hold together by bolting the big flanges on their edges (in the middle of the transmission cover) together. So by building the kit the join gaps on the two sides should be filled (if there are any) and replace the cast texture there, and there should be a slight join line scribed all around the middle of the flanges. - the small L-shaped part on the front glacis: it was a footrest, a support for climbing up in the glacis. - turret boxes: The first was the radio, because the big breach of the 17pdr left no place for it in the original turret bustle. So the rear was cut out and an armoured box was permanently welded to the back of the turret. The second one however was a simple steel stowage box, often removed from the turret. It was fixed there by small steel plates welded to the radio box. So the narrow verical bars at the end of the radio box should overlap the storage box, not being flush with the edge of the radio box. - the small rectangles on the side of the hull: those were part of the "boathouse", a frame and tarp which covered the tank and disguised it as a lorry. The two pronges on the front fenders were part of that too. - track construction: after making the small segments it easier to connect them in the jig. put one connecting piece in the middle, two segments at the two end, push the side fixers on and it will not be fiddly.
@juliohernandezgonzalez28123 жыл бұрын
Hola,buenas noches queria saber donde ha comprado la pinza de corte, que sale en el video del montaje del Sherman, es la primera vez que la veo, un saludo y gracias
@johncrimmins15402 жыл бұрын
hi, love your comments. The "Just Fiddely" comment is exactly it. Love british armor ww 2. Tamiya Archer was great. I really hate this kit. Plastic micro part to go into photo etch. not mentioned on some pre drill holes, yet photo etch in unseen areas and gaps!. Really hate this kit. To much brass
@familyhobbies33433 жыл бұрын
It’s 17 pounder not 16 pounder
@mikecooper8462 Жыл бұрын
It's the "final drive" assembly. 🤙
@peterharman84664 жыл бұрын
Cor blimey I've just recd delivery of the Sherman with full interior rm5042 model n I only have one good hand so if you have troubles there's no hope for me then lol
@timtheeagle14 жыл бұрын
Firefly would be an M4A4, radio was mounted in the first add on box in the turret, then a stowage box after it, the 17lb gun was huge and that's how they made stuff fit, that's also why the bow machine gun position is blocked, there was no gunner there cause that space was used for ammo storage for the much larger 17lb ammo.
@lesthiele49214 жыл бұрын
Looking good mate, i have always liked the Sherman, looking forward to the next episode, please keep safe and well in these troubled times.
@rickhoffman24702 жыл бұрын
It's called the transmission housing
@corradolaccetti12093 жыл бұрын
I wanted to know which brand is the cutter you use to cut plastic? Thank you very much. You are very very good you are an expert model maker. Reyfield model tracks are very very difficult, I prefer magic tracks
@willthorson45434 жыл бұрын
Funny, meng learned from their first Sherman by including rubber band tracks and single link tracks in their jumbo kit. Hopefully rfm does the same...
@christopherscott9344 жыл бұрын
I've been thinking about grabbing this kit and skipping Dragon's versions. Looks like a nice kit and Dragon needs some competition IMO. I agree some things look over engineered but it doesn't look Miniart over engineered lol.
@spongya774 жыл бұрын
If based on my experience with the RFM Panther, then yes. It is way too overengineered. (-and also not fitting well -I mean the Panther. It was a huge shock to me.) But then again, the M4 is a much smaller kit than the Panther was. Compared to the only RFM kit I have built so far, MiniArt was much better experience with about the same detail (T-44, T-54-1, T-55A, T-60, a few of their dozers and whatnot).
@christopherscott9344 жыл бұрын
@@spongya77 I've been wanting to get Mini Art's T-55 .
@spongya774 жыл бұрын
@@christopherscott934 Well, go for it. I can only speak of my experience: it is (well the T-44, T-54-1 I built so far) a much more pleasurable experience than the RFM Panther was. (I literally felt the model fight me most of the way...) Here, a comparison with the Takom Panther butterfingeredmodelbuilder.wordpress.com/2020/09/04/the-tale-of-two-panthers-2-a-build-comparison-of-the-rye-field-models-and-takom-models/
@ChrisK-LTC4 жыл бұрын
4:50 .... Transmission Cover, early 3 piece design too
@seansmodelingchannel11494 жыл бұрын
Nice video mate
@virtuosomusoАй бұрын
could you tell me where you got your sprue cutter from please
@spitfire3280 Жыл бұрын
What cutters are you using, like pincer cutters?
@user-ec7dz2zz3c Жыл бұрын
The assembly of the individual track links are absolutely the worse I have ever attempted to put together. Plus, the boogie/suspension is WAY over engineered. I replaced them with the one's from Dragon's British Sherman Vc Firefly. Also, I wished RYE FIELD would have included a set of vinyl tracks in the kit.
@Mauscmkwk3 жыл бұрын
You should try some model master glue it will work on photo etched parts
@remcokompier13502 ай бұрын
There is no bow gunner in a fire fly its a amo storige and in a regular sherman has a .30 there not a .50
@chrisscheuerman46472 жыл бұрын
Excellent instructional clip, very well done. Question, what are you using to secure the photo-etch? The stuff in the green container. Thanks.
@kenjohnston8173 Жыл бұрын
Superglue, preferably gel slower drying
@Subzero21513 жыл бұрын
Got this kit recently, it didnt come in plain grey, but german yellow, anyone else get the same ?
@TEN44 жыл бұрын
The plastic snapped on my idler wheels aswell. Bizarre considering how good the rest of the kit is.
@johncrimmins15402 жыл бұрын
How did you do the front hatches? first time in 30 years just threw the kit away. the two pieces that fit between E 22, 23 were not even close. Too much bull shit. thanks
@lazyled4 жыл бұрын
thats a beautiful rubber crack over there
@lazyled4 жыл бұрын
8:21 just saw that this was the idler...
@tonyromano62204 ай бұрын
High end kits are painful compared to Tamiya! (Older Tamiya)
@anunknownperson75022 жыл бұрын
The lower part is pronounced (glay,sis) glacis
@gregsutton2400 Жыл бұрын
Duck bills are just replacement end connectors, should not be more work at all.
@bonerkatletos36494 жыл бұрын
When we see the continuation of the build?
@garymurphy51334 жыл бұрын
The drives on the gearbox might seem over engineered but if you want to depict the model with missing wheels or maintenance. Tamiya would be a better fit BUT less detail and same kit price so less hours of enjoyment.
@egyeneskifli78082 жыл бұрын
The newer Tamiya Sherman's hull is not "absolutely perfect". It is a janky shit, with gaps almost everywhere. The molding quality on those kits are just bad. Almost all of the parts warped. At least on my M51 that was the case. The upper hull is 1 mm longer than the lower for example. Tamiya Shermans among the worst in the market these days. Only the Italeri form 1977 is worse, but the Italeri is priced accordingly. MEanwhile Tamiya is priced if it was a premium kit. Nope, it is absolutely not premium. Even the Zvezda Shermans are way better, for half the price. Tamiya Shermans are the ones lacking. Tamiya Shermans are oversimplified even compared to the aformentioned Italeri. Tamiya engineering on their armour is nothing else but cheaping out.
@ThisIsSewMe4 жыл бұрын
What size springs are these?
@dancingcharmander52004 жыл бұрын
What are your clippers! They confuse me!
@svaltalgert83224 жыл бұрын
P-40 ???
@ChampionScaleModelling4 жыл бұрын
Coming, slight delay, final weathering. Stay tuned!
@lappin64823 жыл бұрын
those tracks 🤦🏻♂️😫
@piper0811472 жыл бұрын
17 pdr gun, not 16 pdr.
@ChampionScaleModelling2 жыл бұрын
Yep
@pandaphil4 жыл бұрын
I think you have to be a bit of a sadist to be a model kit designer.
@Frserthegreenengine3 жыл бұрын
Model designer: "Right shall we make the tracks detailed but easy to fix together and make the roadwheels as one piece so that it comes together nicely?" Rye Field Models: "Nah, that's too simple and logical, we need to make them complicated as it will appear more professional and detailed. Oh and add some springs and make the suspension 6 pieces!" Model designer: "So make the the track multiple fiddly pieces again and make the roadwheels 4 pieces again?" Rye Field Models: "Perfect!" But seriously. Why do they need to make them so complicated and all that. Are they appealing to the "rivet-counters" who like complicated things rather than most normal people who want something that works nice and stress free?
@TheModelGuy2 жыл бұрын
Plenty of options out there for people who don’t want the detail this kit has. The track assembly looks a lot worse than it really is. Took me about four hours to complete the tracks. You get in a routine with a movie and boom, done.
@fredericksmith52353 жыл бұрын
17lb not 16lb
@brianhurley62893 жыл бұрын
It's a static model. What's the point of moveable tracks? Meng Sherman has individual guide teeth for God's sake. What's the point? Rubber band tracts, like on Tamiya Sherman's are way better. Done 6 Meng T90s with tracks like this. After model is finished, it makes no difference.
@frankwittner19793 жыл бұрын
I’m not disagreeing but if your a diorama builder nothing looks more stunning than a tank going on uneven ground with the suspension articulated to the ground. Generally if it’s just on a flat base especially with Shermans the new Tamiya rubber bands can be weathered up nicely, but I purchased the E8 Sherman and the Meng for this reason. There’s a older diorama book by Hal Sanford and he did that with a old I believe it was Tamiya m-60 and it looks amazing.
@ericgrace99953 жыл бұрын
16 pounder gun ? If you've selected the kit it's best to know what you're making..
@antonrudenham32594 жыл бұрын
There is no need to have tracks so damned complicatedly tedious and time consuming to put together, when finished they look no better than link and length and they prevent me buying a kit like this that I would otherwise have bought. Pointless, do a bloody jigsaw instead!
@Dragonblaster13 жыл бұрын
That's a 17pdr gun, not a 16pdr.
@MarcioFSilva-hv7oo3 жыл бұрын
Too complicated for a simple mortal
@willus5674 жыл бұрын
just threw these tracks away honestly not worth the time just for them to fall apart a hour after