Ryobi 18v Ez Clean Quick Quick Connect Foam Cannon Conversion Pressure Washer Ezclean 600 320 psi

[@EgoRN16]

Thanks men. Excellent video

[@stkuj]

This was a biggest thing holding me back from buying the 600. Glad I ran across your vid!

[@mdsuave13]

You are the only person I've seen do this. NICE work. I honestly didn't even bother trying to figure it out and just lived with the terrible ryobi foam cannon....

[@pmags1331]

Exactly what I was looking for . Definitely Will be pick up tomorrow and ordering the adapters and foam cannon . Thanks for sharing .

[@TruthSeekerAi]

i did this hack years ago when the 600 psi model came out greatest thing ever nice to see some1 else is smart on earth lol

[@khrisrod3000]

Wow awesome! I was about to return this device. Now that i know you can use other foam cannons with it i will be keeping

[@aznmode1]

I saw this on reddit also. Great work. I did this with vice grip and wrapped the pipe in rubber but still ended up scuffing the extension. Looks to be made of aluminum.

[@ben-yi3nh]

Great Video !!! Thank you, You just showed how Ryobi ezclean is superior to the DeWalt 550 psi pressure washer in almost any aspect. the biggest advantage the DeWalt have is the standard PW attachments. You just removed this advantage. the Ryobi is the right choice - Brushless motor, Better built with metal fast attachment clips, metal pressure washer rod, and standard attachments.

[@stevestanton8281]

Being in Australia I tried to buy these fittings in a couple of major hardware store outlets, Bunnings and Total Tools just to name a few. None of them had the M10 fitting that fits the Ryobi wand, which of course you then add the Quick connect fitting too. So after following your links I ordered these two parts off Amazon and with the difference between the Australian and American dollar, not to mention delivery fees the two connectors ended up costing me around $55 Australian! Still glad I did it as it's totally transformed the usability of my Ryobi Easy Clean and I can now use my foam cannon anywhere I have water. Thanks again for the vid and tips... PS, The one thing I would add though for anyone contemplating doing this is to heat up the wand to melt the red Loctite that holds the Ryobi Quick connect on the nozzle end. Cheers 😜👌🇦🇺

[@vikkleo]

Thanks for the how to video will be doing the same to my Ryobi

[@unclebunkum]

Great video...Thanks for sharing!

[@stevestanton8281]

Did you have to heat up the stem to break the red loctite as it seems like a really strong bond? 🤔

[@DuhRaceCar]

I did not heat it up but you could. It definitely was tight. The vice grips even marred up the stem a little.

[@pauldipratna4067]

Where can you buy this adapter? Please send me a link or please tell me where to buy from local store.

[@DuhRaceCar]

Are the links in description not working?

[@Kevin-sg5xc]

you are THE MAN

[@Ewood1388]

How long does it take too charge?

[@Jay-sg2ww]

Great hack figuring out you can unscrew the plastic pieces to expose m10 threads on the rod . I just picked up the 18v 600psi kit with accessories for $135. Came with a battery and a bunch of accessories like the 0/25/40 degree tips and some other accessories. Now I'm wondering if I just get the tool $100, do this hack, and buy the foam canon and tips you have listed.

[@DuhRaceCar]

It’s more universal so if you ever get a electric or gas pressure washer you can use the same accessories. And to be honest most of the ryobi accessories aren’t that great

[@elijahmace6268]

Genius!

[@juneamante4274]

Where did u get the standard pressure nozzle tips from

[@DuhRaceCar]

It came with the foam cannon set

[@fprezz6990]

So I can't get the tip removed. Followed your instructions but unable to take off. Any tips to help loosen and remove?

[@DuhRaceCar]

Did you use vice grips? It was a little tough to break the loctite.

[@fprezz6990]

Yes. I finally got it! Adding w2 for several hours and it came loose.

[@seanbarber3209]

Can you still use the EZ Connect tools after you mod the extension rod for the quick connects?

[@tonytam4767]

No once modded that rod will no longer work. If you buy an extension and keep the original unmodded that will still work.

[@seanbarber3209]

@@tonytam4767 ah so you would have one extension for each. Does Home Depot sell just a replacement extension? Thanks for the insight!

[@tonytam4767]

Or you could revert back by screwing that unscrewing mod, but that sounds like a hassle. The link to extension wand is in the video description. I haven’t personally verified it works but based off the pictures it should.

[@seanbarber3209]

@@tonytam4767 thank you

[@crucian7]

The link you posted for the M10 adapter seems incorrect. It links to a 1/4 to M12 1/4" NPT Pipe Female x M12 x 1 Male Metric   

[@DuhRaceCar]

thats strange I see it when I click it. Its like 5 rows down and highlighted for me.

[@MrZACATECANO100]

Luckily mine was easy to unscrew without pliers, so the metal wand is not damaged from pliers.

[@lukas______]

Just buy a $12 adapter instead of buying these separately. Cheaper and easier

[@Pro1er]

What adapter are you referring to?

[@mdsuave13]

?

[@Featherstone27]

When you do this you're hurting the company why don't you buy the products they have since you like the company so much when you do this you're hurting the company

[@DuhRaceCar]

All the other Ryobi pressure washers come with quick connect adapters. This is an exception. I did purchase their inferior foam cannon made for the clean which led me to do this so I can use their other quick connect adapters.

[@scottmcbride2237]

Lol. It's so you can have more options on foam cannons and nozzles that's what I did and it actually makes it alot nicer and I can also achieve more psi with a different Nozzle. Awsome mod.

[@Kevin-sg5xc]

because Ryobi's foam cannon blows (not in a good way).

[@MBV180]

Because ez clean attachments suck ass. If you’re already buying the ez clean for 100+ bucks, why spend 35 bucks on a “foam” cannon they didn’t even design and slap their own quick connect system that only works on the ez clean. lol….

[@AleyaBegum-dv3ut]

Your video is very nice. But your video is not SEO score. This video optimization checklist title, tags, is not SEO. Your no video tags, no channel tag. To increase your video views and subscribes you need to do throrough SEO. If you can't do this I can help you.