We love our Ryobi nail guns. They are so much fun! We're always building so subscribe to see our regular uploads!
@patrickjoseph91586 ай бұрын
Dude, these tools are so good. Have used the pin nailer and brad nailer (not one plus) with 1.5ah, 4ah and 6ah batteries. Makes me really appreciate not lugging an air compressor, hose, and gun around all the time. The efficiency of the reset between fires and effectiveness of driving the nail increase with battery size. The 6ah makes it a completely different tool from the 1.5ah.
@AtomicDairy6 ай бұрын
Absolutely agreed on all! We love these guns and use them all the time!
@MrVisde6 ай бұрын
I have a Makita 16ga finish nailer and a Ryobi 18ga brad nailer. I prefer the Ryobi…it never jams on me, it has great battery life, and it feels solid. And I think it was half the price of the Makita equivalent.
@AtomicDairy6 ай бұрын
It really is a great tool!
@antelmosanchez73342 жыл бұрын
You're wife did an amazing job on the shingles, while you were reviewing the 16g nailer. She's awesome!!!
@AtomicDairy2 жыл бұрын
She is awesome! And she's a machine when using that nailer!
@larrynelson78398 ай бұрын
Great Review! Your assistant who "stole" your nail gun and said "nailed it" ----- that was cute!
@AtomicDairy8 ай бұрын
She's the best! And she loves nail guns!
@csimet2 жыл бұрын
I have both and use them all the time for home projects. They work well and never jam. I like them so much, I got the 18 GA crown stapler and 23 GA pin nailer. Very cost-effective for home use.
@AtomicDairy2 жыл бұрын
Completely agree. We love these nail guns and they keep getting used on new projects.
@stevelane19562 жыл бұрын
We don`t get the Stapler in the UK unfortunately, no idea why. I`ve had my 18g nailer for about 8 years and it`s used almost daily. Never let me down.
@fijah6 ай бұрын
mine jammed. dog shit
@hamantcable Жыл бұрын
I don't comment normally but this was information and funny, thank you!
@AtomicDairy Жыл бұрын
Glad it was helpful! And that you enjoyed it! And that you visited! Many thanks!!!
@antelmosanchez73342 жыл бұрын
I own all the Ryobi nailers from the 3/8" Stapler, 23g. pin nailer, crown stapler, 15g angle nalier, 16g, & the 18 gauge models. HOPEFUL they make a framing nailer LOVE MY RYOBI NAILERS!!!
@AtomicDairy2 жыл бұрын
GREAT tools and very useful. I'm using them a lot more than I thought I would!
@FreeBlackConservative68592 жыл бұрын
Think they have a framing nailer! It comes in 15 and 16 gauge
@David.M.3 жыл бұрын
I don't own a nail gun yet, but I thought I would like the battery operated style. Thanks for the review!
@AtomicDairy3 жыл бұрын
Ryobi is slowly convincing us to change to battery tools. We've been blown away at the power and long battery life of these nailers. Highly recommend!
@tsetendorjee9040 Жыл бұрын
Thank you very much for Ryobi AirStrike P320 and P325 Nail Gun Review - Nail Guns Everywhere!
@AtomicDairy Жыл бұрын
Love these guns. I use them all the time!
@kermitmiller64915 ай бұрын
Great video = informative and great format- It helped me choose the 16 gauge for the 1st nailer.
@AtomicDairy5 ай бұрын
Great to hear!
@user-cw9em3mo3w3 ай бұрын
Got the 320 from a pawnshop for $100 with battery awesome tool!😂
@williamasher30192 жыл бұрын
Thanks for the review Mate, love the straight froward preso , fun and informative. Just got my first nailer for X-mass and I am now gunnig for it , YE BABY .....
@AtomicDairy2 жыл бұрын
Thank you! Glad you got one too. You'll love it!
@TheTravelingThrifter Жыл бұрын
“I got stuff to do.” *stares and walks away” Same girl same 😂😂😂 I love these people. Such an informative video. You’ve gained a new follower lol
@AtomicDairy Жыл бұрын
She got it done too!
@Metal_seer14 күн бұрын
Being juat a DIYer, I'm going to try to use the 16ga., which can fire 2.5 inch nails, avoiding the need for a framing gun. The 18ga. is limited to 2 inch nails, which is too short for 2x3 and 2x4 work. Great video. How did you get your wife to do the work while you film a video? 😊
@meaganc1aireАй бұрын
This was a great comparison, thank you! The only think I would have liked to seed added is: Can I use the 18g for trim? Is it still suitable for that? As a smaller person, I would prefer the smaller model.
@AtomicDairyАй бұрын
Yes, absolutely. And you can use a lighter battery as well. Just have two of them so you can switch and keep working when one runs out, with one in the tool and one on the charger.
@Diamond_Hanz9 ай бұрын
Best thing about this tool is that I have to bring it back every 29 days
@colmmagill40979 ай бұрын
I have 3, ,2 18 gauge and 1 16 gauge bought them for $99. Couldn't buy a nailer from another brand as good as them
@Rhiostatic Жыл бұрын
I love your helmet!! what kind is it??
@AtomicDairy Жыл бұрын
Navy flight deck helmet. My dad as a Navy pilot and I grew up wearing his old one around loud tools. They work great!
@Rhiostatic Жыл бұрын
@@AtomicDairy thanks man!! I knew it looked familiar but I just couldn’t remember why
@G2Bjo0392 жыл бұрын
Love the video and the Philippine sticker on the background.
@AtomicDairy2 жыл бұрын
Thanks! My dad was Navy and we were stationed in the Philippines for awhile. I went to junior high in Zambales and high school in Bataan!
@G2Bjo0392 жыл бұрын
Thanks to you, I bought the Ryobi Air Strike. Love it thus far. Thank you.
@AtomicDairy2 жыл бұрын
@@G2Bjo039 Outstanding!!! I hope you like it as much as I do!
@patriciadixon80902 жыл бұрын
Awesome Presentation
@AtomicDairy2 жыл бұрын
Thanks a lot! I had fun making the video and the nailers still work great!
@youpetaw972 жыл бұрын
Nice and very funny presentation! Kudos!
@AtomicDairy2 жыл бұрын
Thank you very much and glad you enjoyed it!
@mikefa58913 жыл бұрын
Cgreat compariso review! Can you please do another review on the Ryobi 18V Airstrike 15 Gauge Angled Finish Nailer P330 model.
@AtomicDairy3 жыл бұрын
That one is on my list to get but it may be awhile. These Airstrikes are really great nailers and I'm looking forward to completing my collection!
@americanhero12348 ай бұрын
Great recommendations!!!!
@AtomicDairy8 ай бұрын
Glad you like them!
@kcpth9 ай бұрын
Love it... you guys are hilarious
@AtomicDairy9 ай бұрын
Why thank you! Glad you enjoyed it!
@MadHatter7643 жыл бұрын
That was a nice overview and introduction to the nail guns. That disc sander in the back is missing the sanding disc...curious about the story on that.
@AtomicDairy3 жыл бұрын
We used up that disc on a project awhile back and haven't stuck a new disc on yet. We have a few in the drawer of that tool stand but just haven't needed them yet.
@2jrjr2 жыл бұрын
Thanks for the review!
@j-dog9800 Жыл бұрын
I love my Ryobi tools, and now I need a brad nailer and like you video. I see you used the off brand batteries, what is your opinion of them compared to the real Ryobi batteries? Do you suggest them?
@AtomicDairy Жыл бұрын
Those are real Ryobi batteries, but I have heard of other types. I've never used anything else though but others seem to do just fine with them.
@8531852 жыл бұрын
Alot of fun waching this video
@AtomicDairy2 жыл бұрын
Thanks! Very glad you enjoyed our humor!
@blkgodisfurious32587 ай бұрын
Best video 💯
@AtomicDairy7 ай бұрын
Thank you!!!
@user-markparker7 ай бұрын
I don’t know if there is such a thing, but I’m looking for a bit of an all rounder & need your help. I have to do some work in my loft using 4x1 & 4x2, but would also like to use a nail gun when building bird nest boxes so would then use smaller nails, which gun would you suggest to cover both tasks? Thanks & have just subscribed. 👍👍
@AtomicDairy6 ай бұрын
Welcome aboard! And glad you liked the video! If I only got one I would get the 18 gauge gun. We tend to use that one the most and that's the gauge I think would work well on smaller tasks like your bird house. We use it for most things these days.
@user-markparker6 ай бұрын
@@AtomicDairy Thanks for your reply, I bit the bullet & purchased the 18 gauge gun & it works a charm, thanks again. 👍👍
@bobetization Жыл бұрын
im going to buy tomorrow P320 nailgun it selling $198 at home depot
@AtomicDairy Жыл бұрын
That's a good deal. You'll love it!
@mbudziszek2 жыл бұрын
Nice bidet!
@AtomicDairy2 жыл бұрын
Thanks!
@scottbionicnerf87272 жыл бұрын
I love my Ryobi tools. And I have beat the crap out of them.
@AtomicDairy2 жыл бұрын
We haven't had any problems with ours and keep adding to our inventory!
@DMWDEADMAN Жыл бұрын
Gracias vato appreciate it 😊
@AtomicDairy Жыл бұрын
¡De nada! Are you going to get one of these?
@terrywong7879 Жыл бұрын
Love the toys!!! Cheap and cheap.
@EMERSONVIER2 жыл бұрын
Nice job!
@AtomicDairy2 жыл бұрын
Thanks! We like these guns and recently used them to build a dinosaur. True story!
@michaelparker50302 жыл бұрын
5:50 not the biggest fan of the house, but probably pretty cool inside.
@michaelparker50302 жыл бұрын
Is the ONE+ HP worth the extra money 💰
@goober6982 жыл бұрын
Military cranial protection love it old squid here
@AtomicDairy2 жыл бұрын
My dad was an A-7 pilot and sold us on flight deck helmets. They work VERY well in the shop!
@pascalbouard59322 жыл бұрын
Thank you for the funny video. Is possible to put 18G nails in the P325 tool (dedicated for 16G nails)?
@AtomicDairy2 жыл бұрын
I wouldn't recommend it. The hopper is too narrow I believe.
@timhewitt322 жыл бұрын
I wish they make a cordless framing nailer
@AtomicDairy2 жыл бұрын
Maybe they'll add one to go with these. They are both great nailers!
@timhewitt322 жыл бұрын
@@AtomicDairy I have the P320 now and I love it - along with a large number of other tools from them.
@Shadow743422 жыл бұрын
Constant jamming of nails, after very little use on a new unit....endlessly frustrating...when it works, its great, but I've had endless downtime. It works 3 times out of 10 in my case. Was quicker to just put in screws or nails by hand into my project. Have to unjam after about 2 -3 nails of use, each time.
@AtomicDairy2 жыл бұрын
Wow. Sorry to hear that. We haven't had any problems but maybe we'll see trouble in the future. Hope not.
@221b-Maker-Street10 ай бұрын
If you could only have *_one_* of these nailers, which would you go for, please? I'm a keen DIYer, and upholstery/upcycler and unsure which is the right tool to choose. I'd welcome advice please?! 😊
@AtomicDairy9 ай бұрын
If I only had one I'd go for the lighter weight gauge. It's more useful for the type of work I do. But if I was doing a lot of moulding work I'd go for the 16 gauge. Depends on what you normally build.
@nosvr_22 жыл бұрын
Love it! Thanks for the heads up!
@AtomicDairy2 жыл бұрын
Happy to help!
@LeonardHendrix Жыл бұрын
This is the way.
@AtomicDairy Жыл бұрын
This is the way.
@Denvermorgan2000 Жыл бұрын
This channel is obsessed with French cleats.
@seanthornhill950310 ай бұрын
Every upper cabinet I hang, every wall panel I hang is on a French cleat
@Radomirius Жыл бұрын
Next step for you two is canon operative course :)
@chrisj5984 Жыл бұрын
I'm looking into buying a cordless nail gun (my first nail gun), and still a little confused on which gun to get (18 gauge brad or 16 gauge finish). I would primarily be using the gun for baseboard / quarter round and other trim applications, no fine wood working. I think what has me confused is that I see people install baseboard and trim with a brad nailer when other people say to use a finish nailer. Please help
@AtomicDairy Жыл бұрын
I've used both, depending on the thickness of the trim and what is behind it. If you are going through a thick piece of trim, the sheet rock, and into the stud in the wall you will probably have better luck with the 16 gauge. For thinner work the 18 gauge is less likely to split the trim, and it leaves a smaller hole in the surface.
@goober6982 жыл бұрын
So you have plans for that hanger for those tools
@AtomicDairy2 жыл бұрын
Sort of. Here is the project and we lay out all the measurements in the video: kzbin.info/www/bejne/oJuwc3apiZ1kpqs
@Paul_Dalangpan2 жыл бұрын
I got the P320 and was too happy, until a few minutes into use, less than 30 or 40 nails, it just stopped working. I checked everything 15 times... may be more... used three different fresh actual Ryobi batteries, and I couldn't get it to work. Drove back to Home Depot and did a swap. Second one seems to be working better, but several times, still, on the second unit, it just decides to stop working. Second unit at least has come back on line and I am able to keep working on our project. I was so upset, that I actually broke out the manual and read it. I am not seeing, at all, what I am doing wrong. I looked through the troubleshooting page and its a fat N/A for me. hmmmm .... so on the back, I am suspecting that maybe, that knob should never be touched; leave in the middle? Wait- I tried that too. I love this thing. I think when it works, it's a game changer for us. I have many Ryobi tools, but prior to today, I have never, EVER, had any malfunction with any of them. Would appreciate your insight on this. No, the tool never got a chance to get hot. Fresh real actual Ryobi batteries. No nail james. I tried with the plastic nozzle cover on and off. Tried both 1 1/2" and 2". Checked for jams obsessively. Played with that gray twisty knob thing up front and the gray twisty thing in the back too. Thought I was going crazy so my sister tried everything I did also- you know- just in case it's just me.
@Paul_Dalangpan2 жыл бұрын
Should it be sensitive to angle of use? I am thinking that should not matter. It would be a shame if this thing can ONLY be used at a 90 degree / straight up and down position.
@AtomicDairy2 жыл бұрын
Is it possible you got two bad tools? We've never seen that happen with ours even after a couple hours of use.
@Paul_Dalangpan2 жыл бұрын
@@AtomicDairy this was a while back. Thanks for the follow up. I disassembled the firing pin a assemble, applied gun oil, and manually moved the plunger in and out a few times for the oil to lube the cylinder. It works perfectly now.
@AtomicDairy2 жыл бұрын
Outstanding! Glad to hear you fixed it and I will remember your fix if my guns start acting up!
@schererstyle413 Жыл бұрын
I have to remove my battery after each individual mail and put it back in to get it to do the next one….. it’s brand new. Battery is fully charged. I’m about to take it back 😢
@ericscheibe10764 ай бұрын
Don’t say bump fire ATF will take it away 😂😂
@eme14682 жыл бұрын
What would you suggest for outdoor heavy use, I know paslode have first fix for outdoor use and second for minor work (I think I got that right)
@AtomicDairy2 жыл бұрын
Well that is a framing nailer, which is a few steps up from our brad nailers. But Paslode has a great product that can do the job. For lighter work like we do like moulding attachment and box construction the Ryobis work great.
@johnotoole5786 Жыл бұрын
Im a dewalt guy but this trim gun best product ryobi makes
@AtomicDairy Жыл бұрын
Absolutely agree!
@Crypt0dave14 күн бұрын
What gun is for 1st fix and what one os second fix
@theokalentzis74242 жыл бұрын
Just wondering if you can comment on nailing moulding with the 320. You mentioned that the 325 worked well but is the 320 equally good? Don't really feel like spending the difference for the 325 personally.
@AtomicDairy2 жыл бұрын
I have nailed moulding with both and had no issues. I prefer heavier nails for thicker moulding but both guns do a great job.
@louislandi93810 ай бұрын
A lot of the Ryobi haters never owned or even used one.
@robenvilbar61132 жыл бұрын
How much was the maximum brad nail use for 18g p320 mate?
@AtomicDairy2 жыл бұрын
If I understand your question, it can fire 105 nails before it runs out. In actual use we tend to put fewer brads in it because most of our jobs don't require that many nails.
@sullykls1 Жыл бұрын
which one will work best for baseboard molding in my house? dont need anything more fancy
@AtomicDairy Жыл бұрын
We use the 16 gauge for baseboard stuff. Works great and does not split the half rounds.
@nodoubt46able Жыл бұрын
18 gauge, 2 inch, is more than plenty to hold a simple piece of base on, and the hole is twice as small...i use a brad nailer for all my trim, unless its 3/4 of thicker
@zuuzuka Жыл бұрын
Can we use the nail gun on bricks or concrete?
@AtomicDairy Жыл бұрын
I have, with mixed success. Probably depends on how dense the brick/concrete is at your site.
@zuuzuka Жыл бұрын
@@AtomicDairy thanks for that! I really need a cordless nail gun that can do bricks.
@NerfRules222 жыл бұрын
Can you only use finish nails in these? I need to use nails with a slightly bigger head
@AtomicDairy2 жыл бұрын
You should be able to if they come in the right gauge.
@eyeonart68652 жыл бұрын
Which one for garage door weatherstriping?
@AtomicDairy2 жыл бұрын
I'd use the P320 Brad Nailer but both could work for that job.
@gtakeifer Жыл бұрын
The brad nailer would suffice for shoe molding.
@charmedbygalss254 ай бұрын
where do u get that 3rd party battery ?
@AtomicDairy4 ай бұрын
It came with the tool. Works just like a real one!
@charmedbygalss254 ай бұрын
@@AtomicDairy r these original ryobi tools ? was it a combo deal real with 3rd party battery ?
@maxtamcpherson88692 жыл бұрын
Hi what size round head nails can be used on a Ryobi nailer. im looking to secure decking joist hangers but not sure if the nail will pass through the pre drilled holes
@AtomicDairy2 жыл бұрын
16 and 18 gauge are what they use and there are a LOT of nails available in that range that would work.
@marlonestrella81052 жыл бұрын
Is this brushless???
@AtomicDairy2 жыл бұрын
We looked it up and don't think so. The both work very well for us though.
@goober6982 жыл бұрын
So they make one for framing
@AtomicDairy2 жыл бұрын
Do they? That means I may need to get another one...
@SwenserАй бұрын
Has anybody tried 16ga nails in the 18ga gun. Maybe with modification it's possible?
@JAIROLUISDIAZ19992 жыл бұрын
Which one your prefer for real hardwood flooring?
@AtomicDairy2 жыл бұрын
Heavier gauge works for us for hardwoods, but we've mostly used these for trim.
@JAIROLUISDIAZ19992 жыл бұрын
@@AtomicDairy so a 15g would be idea
@AtomicDairy2 жыл бұрын
Not sure. We have 16g and 18g but I personally would use larger nails to attach flanged hardwood floors. But I've never laid a floor before and might be wrong.
@thanhduong91452 жыл бұрын
hi, i was looking to buy a brad nailer and wonder if any battery works with this tools ?
@AtomicDairy2 жыл бұрын
These use Ryobi batteries but we've seen some after-market adapters that can support other batteries. We like simple though, so we just use the Ryobi batteries. They are pretty great and run these tools for a long time.
@marvinlsd Жыл бұрын
Have you got fake Ryobi batteries in them?
@AtomicDairy Жыл бұрын
Nope, real batteries all around!
@kojomensah74742 жыл бұрын
Greetings I need one for Staples??
@AtomicDairy2 жыл бұрын
They have one. Look up Ryobi ONE+ Compression Drive 3/8 in. Crown Stapler.
@alemanivan3 Жыл бұрын
Can it do concrete nails?
@AtomicDairy Жыл бұрын
I haven't used them, but I've heard the gun doesn't have enough power to penetrate concrete or tiles.
@kevinkline3938 Жыл бұрын
They don’t work when they are cold. You have to wait for 1/2 an hour for it to warm up before you can use it. Love it otherwise.
@AtomicDairy Жыл бұрын
I've never used mine cold but now I know what to look out for. Thanks for the heads up!
@ralphyboy3856 Жыл бұрын
Ohhhhhh Bump Fire on a Ryobi, ATF is gonna come and confiscate it cause it’s a Bump Fire Action😂😂😂😂😂😂💪💪💪
@ozzstars_cars2 жыл бұрын
One thing these nailers aren't lightweight, otherwise good value and work well.
@AtomicDairy2 жыл бұрын
Agreed! You can make them a bit lighter by using the smaller batteries but then you don't have as much work time. But they do the job well.
@tonywhittle65202 жыл бұрын
DON'T BUY RYOBI!!!! I have had this piece of crap for about 3 years and done about 10 small project (about 100 nails). It has never worked. DO NOT BUY!!!!!!! CONSTANT JAMMING!!!!
@AtomicDairy2 жыл бұрын
We'll keep an eye on ours. So far no problems but yikes! Sorry yours didn't do too well.
@jheyjhey13 Жыл бұрын
"Ready to nail whatever comes into your path" ughhh
@janetrandle68829 ай бұрын
Shouldn’t you remove the battery while loading for safe practice? Same with adjustments. You have batteries in during these demonstrations…not safe.
@ITWorksSoftware2 жыл бұрын
Safety first, please remove the battery before loading the nail guns.
@clam7412 жыл бұрын
Is that why your wife wasn’t wearing hearing protection ?
@fbeale35372 жыл бұрын
I've been making and installing bespoke kitchen for over 30 year, I have a wide range of Ryobi tools including both airstrikes, there is no difference from a £190. Airstrike to a £560. Top range nailer, the end result is the same, they both put brads in equally the same, so called top carpenter's are just butt hurt because they have to keep up this fake image that you need the dearest tools.
@AtomicDairy2 жыл бұрын
We tend to use what works, but we don't build stuff all day every day. These nailers work great for us and we haven't had any problems. In fact, they are so easy to use that I've put moulding in places I wasn't planning to, just because it was made so easy by these machines.