Ryobi Universal Miter Saw Stand Unboxing and Review

[@hetheringtonfamily8798]

I am a single mumma and I have been looking for something like this but there was no one talking in the way I could understand. THANK YOU 😊 my son and I can start his desk now

[@DavesShop]

Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like kzbin.info/www/bejne/eHbEhpqCd71orbs

[@bellagrace9812]

Just bought the Ryobi 10" compound miter saw with LED light and now I have to have a matching stand. What a great deal you got on that stand. Makes you enjoy it even more. Thanks for the video.

[@DavesShop]

Bella, I agree I have now had mine for over a year and it's great. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that so you don't miss out on any future videos. Here’s another video you may like kzbin.info/www/bejne/rHfZfGZrZtl2erc

[@blendacrawford3525]

Thanks for your discussion on how to remove the saw from the stand. Very helpful when needing to transport the saw after it was put together.

[@One_of_Many750]

You've Convinced Me. I'm Getting This Set. Haven't Done A Lot of Woodworking, Though I'm Trying Develop A Skill, And Carpentry Is Incredible To Me. Building With Your Own Two Hands, Is Invigorating!!!

[@DavesShop]

Hi Akira, I love my miter saw stand and use it regularly. You are correct I also get real enjoyment with building things check out some of my other videos. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that so you don't miss out on any future videos

[@ScottSmithPhotos]

I have my 10" Ryobi compound miter saw mounted to this, and find when cutting 12" lumber the material supports at each end don't come forward enough to support the lumber, creating a particularly hazard situation where the waste piece flipped forward off the stand. It caught the blade guard and pushed it into the blade, and now the guard is it several pieces. The support rollers need to be a bit longer for anything wider than I'd say 8" material. Maybe this was stated on the box or manual somewhere but I missed it. The rollers and stops also aren't level / square with the saw, causing a challenge when making cuts on linger pieces.

[@DavesShop]

Scott, I agree and have mentioned it in a review to Ryobi. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like kzbin.info/www/bejne/rHfZfGZrZtl2erc

[@donnadunagan3354]

Great demonstration! You convinced me to go out and buy one!

[@donnie017]

I have almost the exact same setup. Just got my stand 2 days ago from Home Depot for $69.99 (3/2024) I believe is what I paid for it and paired it with a Chicago Electric 10 inch sliding compound miter saw from Harbor Freight. Looks and seems like it’ll be a good rig, getting ready to put it to use this spring around the house.

[@DavesShop]

@donnie017, I still use mine with my Chicago miter saw and it's still going strong. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like kzbin.info/www/bejne/eHbEhpqCd71orbs

[@giantELF]

I am about to build some garage shelves and buy my first power miter saw (I have been using a miter box for far too long). Going to get this stand. Thanks for the showcase.

[@DavesShop]

Hi Cinemkr you will enjoy this stand it's easy to use and you will wonder how you ever did without it. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that so you don't miss out on any future videos

[@shsechas]

Although I don't really use my chop saw that often. My old craftsman plastic guard broke so bought a new Ryobi 10 in sliding compound saw. It is currently $249 at HD. There was a bonus that included this same Ryobi stand which is $149 at HD. Couldn't pass up that deal. It is for sure a great stand. You had to have it either shipped to the store or to your home. I went to HD and if you bought it right from the store you would have had to pay the $149 for the stand. So ordering it online. I got saw for the $249 and the stand for free.

[@DavesShop]

Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like kzbin.info/www/bejne/emrKhKuJeL-np9E

[@Wackywoodworks]

I have a Bosch stand and I just added shelves underneath of mine for more storage. Because I have no room for a full on mitre station. Mine has a t-track underneath but you could probably make a wooden clamp to attach shelves...

[@DavesShop]

Hi WWW, that's a great idea I made a rollout box that the stand sits in so It's easy to move around the shop when needed and also doubles as a place for scrap pieces of wood. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like kzbin.info/www/bejne/rHfZfGZrZtl2erc

[@UsernameBarbF]

Dave, what a great video! I am an absolute newbie at all of this wood shop stuff--I'm kind of feeling like I'm feeling my way through in the dark as to learning which things I should buy and which things are just gimmicks. Your video was very informative, you showed all the key elements and how they worked, and you were very reassuring. I did buy the Ryobi saw already and I'll wait a bit and buy the stand when it goes on sale since I don't have time to try building anything. Your grandchild did a fabulous job of filming! Thanks to both of you!

[@DavesShop]

Hi Barb, Thanks for taking time to watch the video. let me know if you have any other questions. Also check out the student desk I built for one of my granddaughters it was a great project for the backyard DIY woodworker. kzbin.info/www/bejne/fmKXgnh3eaimZrM

[@iamamish]

Great video - I bought the same stand and I really like it. Ryobi sells another stand for about $170, and as far as I know the differences are minimal: 1. The more expensive stand holds about 400 lbs, while this one is rated for 300. 2. The more expensive stand has arms that reach out to 9' - this one reaches out to 7'. 3. I've heard that the more expensive stand can accommodate sliding miter saws at 12", while the cheaper one (the one in this video) is limited to 10", though I'm not positive about this. To me, the differences are pretty minimal and it makes this an amazing deal.

[@DavesShop]

Hi iamamish, I have a 12 inch sliding miter saw attached to my stand and it works great. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like kzbin.info/www/bejne/m4fQl4acgJt3gLs

[@kboo74]

Just picked up the bigger one that accomodates 12 inch miter saws and extends out to 9 ft with a 400 lb capicity for $124 at HD instead of $170! heck of a deal!

[@JavierAlvarez-lu7bf]

Thank you for the video

[@DavesShop]

Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like kzbin.info/www/bejne/qHjRoHZsh7aKfLM

[@dupre7416]

This is on my wishlist right now. I'd love to get this and a new 10" Ryobi sliding compound miter saw. They sometimes offer a little discount if you buy both. With the discount, the stand is about $70. Thanks for the nice unboxing and demonstration. Great advice at the end. It made me check the date. 👍

[@DavesShop]

Hi Dupre, I still use mine on a regular basis and it's the best investment for a tool I use alot. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like kzbin.info/www/bejne/hGHHfKh4eb6BbdU

[@kevinmalan8362]

Pretty cool little stand! Thanks for the video. It’s nice to see how stuff like this are setup before putting out the money.

[@Jaredshapiro1]

Thanks for the review Dave, just purchased mine :)

[@DavesShop]

Jared I have had mine about a year now and still love it. Sorry for the delayed response just getting over covid. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that so you don't miss out on any future videos

[@bibur104]

Just got mine! Ty for this video. Easier than the instructions lol

[@DavesShop]

Thanks for taking the time to watch the video and comment I am glad it was helpful. Stay safe

[@alicedickens1876]

Thanks for the video

[@DavesShop]

Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that so you don't miss out on any future videos

[@DavesShop]

It’s been a great stand for me

[@ChadAmI80]

Thanks for the review. I bought a Dewalt sliding miter saw last year because I got a good price on it, but I didn't really have a real project for it until just now. I have been looking at all kinds of stands (dewalt of course) but I think this ryobi one is the one I am going to go with after seeing your review. Sure the Dewalt one is able to hold 16 ft boards, but the likelihood that I would be cutting 16 foot material is just not there. Thanks for helping me make up my mind.

[@DavesShop]

Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's a link to another video you may like kzbin.info/www/bejne/eJjadpKerNOmldU

[@dannymeil3294]

I’m 6’ 4” and I agree that the stand is a perfect height and you can add a couple more inches when you install the miter saw. The one I purchased 4/3/23 was a damaged box instead of 129.00 which was on sale from 179.00 . So it looks like I got the best price on a brand new product nothing but the box was damaged. I got mine for half price of the sale price for 65.00 plus tax.

[@DavesShop]

Hi Danny, WOW what a deal. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like kzbin.info/www/bejne/eHbEhpqCd71orbs

[@martinbrodie8507]

I just bought a Ryobi 10in sliding compound saw and am considering getting the stand. Thank you for your informative video.

[@DavesShop]

Martin Brodie Martin thanks for taking time to watch the video have a great day.

[@johnreinker7291]

Thanks for the vid! Almost went with a more expensive brand but going to go grab one of these. Still $59!

[@DavesShop]

Hi John, I still have mine and it's been great use it a lot. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like kzbin.info/www/bejne/jWrEm6eGZdJoqdU

[@johnreinker7291]

@@DavesShop What was weird is HD had a $79 stand in the saw aisle. The $59 version was out in the main aisle. Took a while to find it. And not sure what the difference is but wow, this stand is sweet. Also not sure how I've gotten by without one. Thanks again for the vid!

[@DavesShop]

. @John Reinker Glad you are enjoying the stand. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like kzbin.info/www/bejne/jWrEm6eGZdJoqdU

[@Inmate533]

The Home Depot store page says this stand holds 400 lbs.

[@FourDollaRacing]

Your neighborhood birds like the weather, too....

[@DavesShop]

Yea, every year here in Texas we get an influx of black birds for spring and summer they make a real mess on everyone's cars and sidewalks.

[@scottmay2054]

I wish the process of attaching the saw to the clamps would have been included

[@DavesShop]

Hi Scott, The reason I didn't show that is every saw is a bit different but there is only four bolts that attach the brackets to the saw so it should be easy to attach. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like kzbin.info/www/bejne/p5engquQq695m8k

[@scottmay2054]

@@DavesShop thank you for the reply!

[@gerald8006]

Great video. I'm a beginner... Would this be a good stand to make repeat cuts of exactly the same length? Hoping there's some sort of way to create a "stop block" to achieve this without having to measure and mark each piece of lumber. Thanks for your help! :-)

[@DavesShop]

Hi Gerald, Yes you can use the end Plate at the roller adjust up above the roller and locks into place as a stop block on the stand. then just adjust the extension to the length you need it to be. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that so you don't miss out on any future videos

[@gerald8006]

@@DavesShop Thanks for the quick reply! I'm actually planning to jump on a sale on this very miter saw stand, so your timing is perfect! Best wishes!

[@underamoon]

what size carriage bolts do you need to connect the saw to the stand

[@DavesShop]

Hi Jonathan all the hardware you need comes with the stand. Thanks for taking time to watch the video and comment

[@jaymarr4124]

Bought mine brand new but no carriage bolts unfortunately. I'll have to buy some from the hardware store. Wish I knew the size myself.

[@jaymarr4124]

Did you figure out the size of the bolts?

[@fixitmonkey8947]

Thanks for the Video! Thats awesome. Have the same setup myself. I'm just wondering if I can mount my table saw in this stand. Or should I? :-)

[@DavesShop]

Fixit, I would not use this stand for a table saw. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like kzbin.info/www/bejne/kKSTi6F4rNR0mpI Follow me on Social Media: Email: [e-mail] facebook.com/hashtag/davesshop instagram.com/davesshop2/ tiktok.com/@davesshop twitter.com/DavesShop2

[@r93n80]

I found some exactly the same at Home Depot for 59 bucks model ending 3618 but didn’t get it because it says on the box not for 12” or larger sliding miter saw and mine is a 12 so I don’t know if I can even use one

[@DavesShop]

R93, Here's the link and model RMS10G at home depot that I use for my 12 inch slider miter saw. www.homedepot.com/p/RYOBI-Stationary-Miter-Saw-Stand-with-Tool-Less-Height-Adjustment-RMS10G/205216315 Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like kzbin.info/www/bejne/iaurlWOEZc-YmK8

[@sherlockbonez]

I am getting one, tired of using the back of chairs to hokd my stuff up.

[@DavesShop]

Sherlockbonez, It's been one of my best tool investments. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like kzbin.info/www/bejne/emrKhKuJeL-np9E

[@shanebarker30]

Hi will it hold any saw ?

[@DavesShop]

Shane Barker Hi Shane yes this stand will work with any saw. I have a miter saw that I purchased from harbor freight attached to mine. Thanks for taking the time to watch the video.

[@dontdomeboo81]

now that shit is $179😩😂

[@DavesShop]

Hi dontdomeboo81, I agree inflation is crazy. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like kzbin.info/www/bejne/fmKXgnh3eaimZrM

[@NBGTFO]

I built my own miter saw table. I thought that was the point of woodworking... to build things. If you are just going to buy shit, why bother?

[@DavesShop]

I agree I would love to have a fixed miter saw table but my shop is to small so i have to be able to setup outside the shop and that's where the miter saw stand works best. Thanks for taking the time to watch the video and comment. Have a great day and stay safe

[@bugman-ir8cw]

And dont forget flexibility...I bought an extra set of the big clamps and fabricated a bracket that the saddle for my old shopsmith goes when I need to use it horizontally. I also use it as an extra outfeed for my tablesaw for sheet goods. My next project is to mount a motor, 4 inch belt drivin jointer (which I can really use the material supports as well. And a belt drivin belt sander......extremely light for how sturdy it is....I've had mine for years and considering another. Worth every penny.

[@DavesShop]

@@bugman-ir8cw thanks for taking the time to watch the video and comment. Sounds like you have used it to the full extent possible. Merry Christmas