"S" mode on the HK-3?

  Рет қаралды 8,875

Darren Copper

Darren Copper

Күн бұрын

Пікірлер: 8
@JL-rx7ou
@JL-rx7ou Жыл бұрын
So that’s what a mode does. Mine just arrived yesterday and I was using it and reading the manual and seen s mode. I actually like the pause it gave the cigarette a second to fall and taking the tobacco off the end. I rolled 5 cigarettes and it was quick! I own the power Matic 2+ and this new machine cut the time in half and much easier. I used shift 1 and it’s packed the tube I can’t imagine how tighter the other 2 levels are. Great machine. I’ve saved a ton of money rolling my own. I usually buy 2 packs every 3 days at a cost of 22-24 dollars. 16 ounces is only 12-13 dollars. That’s legit 600 cigarettes that’s 3 cartons for 12-13 dollars compared to well over 300!
@dcopper717
@dcopper717 Жыл бұрын
Indeed! The savings is incredible, and you can make your own, more flavorful smokes!
@derekbrainard
@derekbrainard 6 ай бұрын
My POWERMATIC 2+ is quieter and I'm able to inject tobacco into 10 filter tubes or half a pack in matter of ~5 minutes. I must say basically the upside of the Hawk-matic HK3 is that It injects tobacco into a filter tube at a very steady and consistent output. With the POWERMATIC 2+, I have to gauge the amount of tobacco I'm placing into the hopper for each and every cigarette. Too little tobacco the cigarette is NOT ideal for smoking.The cigarette will potentially flop. Too much tobacco into a filter tube would result in a hard to drag, a very firm smoking experience. The HK3 produces smokes at a very steady pace. Just place your tobacoo in the hopper, place filter tube on the lip of the machine and hit a button. ANYBODY has the ability to making cigarettes. Kinda of set and forget it. My POWERMATIC 2+ requires a little more labor. You have to use a semi assisted lever when inject tobacco into a filter tube. Nice thing about the POWERMATIC 2+ is the jam protection. Well engineered feature. What happens is if the rod senses too much tobacco or an overload of tobacco in the chamber, the rod will immediately retract. This is done to extend the longevity of the POWERMATIC 2+ machine. It truly whines when its struggling to much tobacco to fill a tube. Kinda funny to see it in action. You'll probably waste a few tubes every so often but you'll notice the saving within the first few weeks of using either machine. Talking about $1.75-2.00 a pack. Taste very close, sometimes better, than some reputable brand name cigarettes. Except They're charging 2-3 times more.
@danielleford6183
@danielleford6183 16 күн бұрын
My hawk3 doest turn on how do I check fuse
@CarlosDeBorgia
@CarlosDeBorgia 6 ай бұрын
WHAT IS THE MOSO "S" USED FOR?
@tonyknorr2987
@tonyknorr2987 11 ай бұрын
what tobacco are you using on this machine ..
@dcopper717
@dcopper717 11 ай бұрын
1839 Green
@FrankT-g6g
@FrankT-g6g Жыл бұрын
NO S mode on mine
Powermatic 5 - Vollautomatisch...Powermatic 5 - Fully automatic
12:45
Die Stopfer - Alles rund ums Stopfen
Рет қаралды 137 М.
Hawk-Matic HK-1C 5.5
4:19
Хроммм Хроммм
Рет қаралды 4,9 М.
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
COMO LIGAR COOLER DE 12V DE PLACA MÃE  COM TRANSISTOR ?
22:08
DESCOBRINDO A ELETRÔNICA
Рет қаралды 55
Modifying the Powermatic 3+ to operate with the door open
3:01
Darren Copper
Рет қаралды 890
Why are we drying filament this way?
7:15
3D Printing Ideas
Рет қаралды 506 М.
Sigara sarma makinesi premium s90 kalite seven müşterilerimiz için
1:04
HK 3 Cleaning Guidelines
1:07
Hawk-Matic
Рет қаралды 495
The NEW Wired Predator - (Review)
28:02
BOJ-E-BIKES
Рет қаралды 4,8 М.
My 3D Printing Predictions for 2025
14:06
Maker's Muse
Рет қаралды 112 М.
Essential Tools For An Electronics Lab
27:29
Noel's Retro Lab
Рет қаралды 665 М.
HK-3 Dealing with JAM
2:05
Hawk-Matic
Рет қаралды 391
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН