S07E03 - Replace the Broken Pedal Pin - Quick Tip

Hello and welcome back.
Here is a quick tip on how to replace the broken pin on your pedals.
You start by drilling straight through the broken pin with a smaller drill bit than the pin itself.
You should aim right down the centre of the pin and be careful not to damage the threads.
Jam the screwdriver into the drilled hole. The screwdriver must fit into the pin hole.
You should be able to slowly unscrew the broken pin grabbing it by the sides.
When removed, check that the threads are not damaged and replace the pin with the new one.
Thank you for stopping by. Feel free to check out our other videos.
Visit: bikebook.si

[@muromango4415]

Thank you for the tip

[@ChrisGen]

Thank you. Do you recommend 10mm or 8mm. Is there much difference?

[@truegopnik2456]

I fucked up and now i dont have one pin 😂

[@alistairdewaard9768]

Hahahahhahahahahhahahahahahahahhahshshhshgshshahahgshahahhahahshahhahahshhahaahah