S2000 Titanium Intake Elbow

We've be asked about these for a while now. We've decided to offer them for the S2000.
This replaces the factory rubber elbow. It's slightly larger diameter and eliminates the factory breather so not to blow oil vapors into the intake stream.
We are including a filter for the valve cover and a water line to bypass the factory piece. For the AP1s, you will need to add a small filter for the air injection hose. We're making this as clean as possible.

[@frankiebob7345]

The sound compartment in the airbox provides another very important function. It gives the mice in your garage a great place to live!

[@LHTPerformance]

lol, You're right there

[@wcsoblake85]

That titanium intake is beautiful and the welds look awesome!

[@sammyalx6978]

3.5" elbow. Gutted box and acoustic resonator removed. Foam filter and snorkel. Best intake you'll have and cheap!

[@MS_06S2K]

Would love to see a video on deleting the breather hose

[@fast02gt]

I don't even have a Honda or a S2000 but I watch all your videos. I admire the quality work you do. I wouldn't be suprsied if you ceramic coated that pipe like you would do a header and see if you heat soak on the dyno. Maybe it won't make "more power" but keep it consistent. Just an idea!

[@eddieh9857]

Honestly i tried few intake not many but just Drop in K&N filter, then the LHT intake Mod and now i have the K&N fipk ram intake and I would say the LHT intake Mod is my overall favorite for sure 100%%

[@jhanpgarcia2725]

Beautiful john.. I just lost my s2000 😭 to a crash. but now I got my eyes to a z06...

[@LHTPerformance]

Sorry to hear that. The C6Z feels very much like an S2000 ,,,Just bigger

[@ramonbriones4487]

Don't downgrade :(

[@LHTPerformance]

Ramon Briones I’ve owned both. I like them both. What about you ?

[@Ryousure]

Real Honda fans. Would know who real time racing is.. so many years of data and working within the rules

[@robertjordan9075]

Nice work and great input. Thanks

[@Reptillian909]

Make one for the 07 Si coupe 🔥

[@wcsoblake85]

Amen! I have the 08 si coupe.

[@ijfba]

i second this

[@MrRevto9k]

Can you do a dyno run one s2k with stock air box mod and one without?

[@LHTPerformance]

MrRevto9k Sure. I’ll try to do one at some point. Keep in mind, I don’t sell this parts and have no invested interest in making the results fake.

[@Clishlaw]

If the plastic intake box heat up and lower performance, won't a Ti intake arm heat up even faster and heat up the air going into the engine?

[@M00n.P00p.]

I might be interested if all connectors for IAT sensor, air pump hose and breather tube are attached. IAT temps might be a little higher with this arm.

[@brendanrogers1990]

Same, I'd consider it if it didn't require fitting a breather filter or catch can.

[@blackthunder7342]

Those Harbor Freight $3 long needle noses are awesome aren't they

[@LHTPerformance]

Black Thunder Yes. We have some expensive ones the HB ones do great.

[@blackthunder7342]

@@LHTPerformance I use them professionally every day and $55 snapon ones aren't any better. For $12 you can get all 4 I've had mine for years

[@blackthunder7342]

I don't know why Harbor Freight doesn't have a tool truck they would make a goddamn Fortune

[@LHTPerformance]

Black Thunder I know. There stuff is getting so good we’ve been buying more of it recently

[@MrTF90]

Impressive

[@kevinkramer2324]

Why dont you do a custom CAI to the bumper for your KW kit? I did on my SOS SC kit and the lowered AIT's 15-20 degrees and made way more PSI and power. It is a no brainer. The underhood temps are awful for power. The open filter behind the radiator and over by the header is HORRIBLE for power.

[@oscarr8190]

How much? people share price info! what are the gains??

[@NicoSaid24]

Hello! This intake is compatible with the saikou michi oil catch can? My car is a AP1 S2000 with F20C1 engine. Thanks :)

[@LHTPerformance]

It fits the same as the OEM. It’s the exact same size and dimensions

[@FreeStyleCooking-oy5ut]

良い感じ👍

[@shibbi972]

Oem airbox is the best, i have an itg filter in mine

[@mengvaj87]

I took the stock box and cut the resonator part off as part of the mod. Anyhow I did my own intake for my 2010 Tundra with 5.7L used part hard abs plastic and only part aluminum I used is the MAF tube. The Air filter I used a cone type aluminum build in filter as my heat shield. Since I don't have one and it's a substitute for it. Oh yea this air filter is for turbo. Anyhow are you able to dyno and tune the tundra ?

[@ssportugal]

Wish you made these for an 8gen civic si, so that i could use one in my Type R FD2

[@ivanbobutac9761]

wauuuu fantastic😍😍, it is possible to create such a piece for a b18c engine Honda integra dc2 type r

[@2MANYCARS]

Hi, I'm interested in ordering the intake tube for my AP1, but it says "OUT OF STOCK" on your site. How should I go about ordering? Do I call you guys or email please? Thanks!

[@LHTPerformance]

Message me on IG. We plan on making some more soon.

[@Thrivetribe47]

LHT please make a kswap civics integras TI down pipe intake also 🙏🏼🙏🏼😉

[@camlobesvtec]

And the custom parts for the rsx?!

[@gxlbiscuit]

does it change the noise of intake?

[@JBaek24]

Can you do a video on the breather vent or filter on the intake arm? John, you mentioned something about the oil vapor shouldn’t be blowing into the intake manifold. @lhtperformance

[@idokwatcher2062]

"crankcase breather filters" some people use is just a clamp install jhpusa.com/products/k-tuned-valve-cover-breather-filter

[@JBaek24]

@@idokwatcher2062 Thanks!

[@josephher5042]

How much is it for one of these intake tube?

[@davidthompson245]

That's one pretty expensive intake pipe!.

[@deathofakitty]

Would you recommend remove the resonator out of the air box?

[@LHTPerformance]

Without making a mess of the box, I don't think you can

[@ayowser01]

Will the intake arm fit with a 1cm throttle body spacer?

[@LHTPerformance]

1 cm = 10mm. Yes, It could cut 10mm shorter and should be fine.

[@khanhle2310]

🔥🔥🔥

[@screamingvteccc]

Titanium is cool but all that work for an elbow i would of just went carbonfiber. Too much work for no power gain

[@superlauhea]

How to make order for this? I am from Malaysia do u ship them?

[@vigossvirus666]

[phone] Whew, goodluck bro getting your intake 😉. Try whatsapp them with picture. The price sure kaw2 bro, titanium custom

[@scoedelic]

Website link to the pre-order?

[@LHTPerformance]

scoedelic we’ve already made and shipped a handful. Contact me on IG and we’ll take your order.

[@yoyoe2367]

Send me one 😩

[@elrodjenkins]

Why waste the money on titanium? Aluminium is better with thermal conductivity. So really, this is just waste of money.

[@LHTPerformance]

Elrod Jenkins This is mainly cosmetic. Aluminum actually absorbs more heat than steel, titanium does a better job for this than aluminum. Again, compare it to a new paint job, fresh wheels etc. all a waste of money, but make our ride look better and the way we feel about it.

[@mikea5205]

So basically Honda has to pander to the lowest common denominator.

[@idokwatcher2062]

Everyone does, unless it's homologation special. Nice example is E46 M3 CSL carbon airbox