Check engine mounts & engine earth strap if you have not already. Effects DIC and misfire issues at max torque if worn or loose.
@robinforrest7680 Жыл бұрын
Love my 2004 9-5 Aero wagon. I spent yesterday tweaking mine. P0101 code, same indications as 0300. Turned out the brake vacuum hose was leaking. Terrible idle and misfires. Changed the hose assembly and everything’s fine now.
@jimjones52364 жыл бұрын
mines doing same thing , im going walbro 255 630 cc siemins new fuel filter new plugs and tune, i have the 3.5 inch str8 pipe too with td04 22 t it hits fuel n boost cut really quick its so annoying
@ac810174 жыл бұрын
I had a 2003 Aero, i loved it, best car i´ve ever had. Then i bought a 2007 Aero and i´m so sick and tired of it. I guess they don´t make them like they use to..
@JonasKakarikas4 жыл бұрын
Some cars are misstreated unfortunately :/ doesnt matter what brand or model. A car in The hands of an idiot owner will turn to shit really Quick 😪
@ac810174 жыл бұрын
@@JonasKakarikas I bought my 95 aero estate from a 75 year old man who came from the far north of sweden, the car had only gone 76000km when i bought 5 years ago. I just got unlucky i guess.
@juancarloslozano33743 жыл бұрын
The origins of the Yellow one :)
@adde64814 жыл бұрын
Alltid lika trevligt att titta på dina videos👌 du får uppdatera oss om vad felet var sen 👍
@JonasKakarikas4 жыл бұрын
Självklart!
@BossBoys-qs2yd4 жыл бұрын
Nice, love the stance.
@christrahi164 жыл бұрын
Funny how I had exactly the same problem with the tube coming off as soon it hits full boost after putting a maptun stage 1 on my 9-5 aero. Now though I have a problem with the car cutting as soon as it hits full boost at around 3.5k. Hope it is not something turbo related.
@callejonsson25893 жыл бұрын
Mass air flow sensor
@pedrofox26094 жыл бұрын
Nice video. Look forward to 31:35 coming fix. I did it last year but now it starts to come back.
@pedrofox26094 жыл бұрын
Finally :-) kzbin.info/www/bejne/i6a2in6JfsmNjKM
@Buffalobulltofta4 жыл бұрын
Ah, den gamla klassiska backventilen. Rekommenderar Maptuns ALU-version, din är nog kass om den skjuter slangen. Får en att sakna en go OG9-5!
@simontveide14294 жыл бұрын
Whats the procedure with pulling fuse 17? Warm up. Engine off Pull fuse, leave out for how long?? 5 min/20 min? Fuse back! Start up, and drive with high gear around 2000/3500 rpm for some seconds?. 🤔😉 😊
@JonasKakarikas4 жыл бұрын
Engine doesnt have to be warm, fuse 17 just reset The ecu. Pull fuse Leave out for 5-10seconds Install and drive in a normal pace for a couple of minutes, usually 3-5min.
@kpr95594 жыл бұрын
A super test drive. Maybe it's DI for reason of miss fires. Or SW. I wait patiently update for this epic project. You will find root cause I'm sure.
@JonasKakarikas4 жыл бұрын
Thanks! For sure we will solve this issue 👍
@TheSaab044 жыл бұрын
Nice work buddy always making nice videos god bless you i have my car apart 05 9-5 aero I started with subframe bushing and suspension and now headgasket which I’m scared to do it my self
@JonasKakarikas4 жыл бұрын
Keep on pushing and the head gasket will be installed in no time and you can be proud you did it yourself 👏👍
@TheSaab044 жыл бұрын
Jonas Kakarikas i hope I don’t see the little marks on top of the camshafts for timing it’s just frustrating sometimes lol
@pontuswendt24864 жыл бұрын
Amazing!! So cool.
@JonasKakarikas4 жыл бұрын
🙏👍
@giannisgj54283 жыл бұрын
saab is love!!
@Soulfirer4 жыл бұрын
Good old fuse 17...... I have to use regularly at moment as I have an emissions CEL as well as an ABS intermittent issue. Does your aero have the button on dash to switch off traction control? I have to switch mine off after every restart, or the engine cuts power... lastly- man, that exhaust does sound LOUD!! 😊
@JonasKakarikas4 жыл бұрын
Yes i have a Button for it 👍 and yes The exhaust is a little to loud 🙈
@xcharles14 жыл бұрын
@Jonas Krararikas, fantastic build!. A question: you mention adaptation, referring to Open SID. Firstly, which values are you looking at AdpN, AdpD, Aadp, Amul, Aadd? Secondly, how do you know when the ECU has "adapted" i.e. what values are you looking for?
@JonasKakarikas4 жыл бұрын
Thanks! I will get a message in The sid when adaptation is done. Both forced adapt and second adapt. When running e85 i always check precentage of e85 in The tank after adaptation.
@MARK65vett4 жыл бұрын
Nice Work !!!%
@thingserik72694 жыл бұрын
Would like to know what happened to my fuse puller. It was there once. Now it's gone. You didn't happen to borrow it did you?
@JonasKakarikas4 жыл бұрын
Haha, maybe 🤔
@thingserik72694 жыл бұрын
@@JonasKakarikas I found it today along with a sliver of wood trim that broke off next to the power door lock button. They were in my house in a bag of junk I cleaned out of the 9-5. Put the tweezer back. Now I can finally fix my trim. Coming close to breaking more pieces off.
@glennnielsen26384 жыл бұрын
sounds awesome
@Mackan1344 жыл бұрын
The T5 pistons and rods is what matters, then you can tune.
@Mackan1344 жыл бұрын
300hk sen blir det inget bra med T7an.
@JonasKakarikas4 жыл бұрын
Ligger Svarvade på hyllan 😉 och därför jag inte kör e85 än 👍
@Mackan1344 жыл бұрын
@@JonasKakarikas Jag har en Biopower B207, gränsen för den är runt 350hk. Gamla T5an ska funka upp till ca 430hk. Jag har haft en 9000 med steg 3 utan problem i 8 år ;)
@JonasKakarikas4 жыл бұрын
Svarvar man kolvarna och kör t7ans stålpackning klarar dom lätt 500hp+ 😉 Kul att du kört steg 3 så länge 👍 riktigt bra test!
@paulreeves50124 жыл бұрын
Hi Jonas, my Aero isn't tuned but I had a misfire on mine under hard acceleration which turned out to be a crack in the coil pack. Might be worth a look,
@JonasKakarikas4 жыл бұрын
For sure will check that out 👍
@onnikonko4 жыл бұрын
1:50 where did you get that rear diffusor or is it 9-3s?
@perarnegausen35663 жыл бұрын
Tror problemet er at bilen bruker olje som gir missfire. Altså slappe T7stempelringer.
@dariussimmons46163 жыл бұрын
Hey bro, can you recommend some names of the wheels that you have on that white 95 or that black 95 that you build the custom coils for. I have a 2006 saab 93 aero 2.8l Please thanks for you videos
@JonasKakarikas3 жыл бұрын
Those wheels are to big for a 9-3, but they could be found in smaller sizes. 20" will look big on a 9-3, The wheels are ocean wheels and lorinser RS8
@dariussimmons46163 жыл бұрын
@@JonasKakarikas To big will they look bad or will I have to get so coilovers to even out the eidw look.
@JonasKakarikas3 жыл бұрын
Its a matter of taste, 19" wheels with Coilovers look good on a 9-3
@dariussimmons46163 жыл бұрын
@@JonasKakarikas Thank you
@connyblomqvist36484 жыл бұрын
Väntar med spänning på fortsättningen av detta projekt 😀 BTW.. Testa att byta tändkassetten..Har själv haft samma problem och det försvann helt när jag skiftade kassett. Lycka till vidare.😀 👍
@JonasKakarikas4 жыл бұрын
Yes, skall testa framöver 👍
@artiromanenko4 жыл бұрын
How much air it request, and how much max Mair you saw? Stock15t-5?
@JonasKakarikas4 жыл бұрын
It cut fuel when mreq was at like 8 - 900, mair 1100-1200
@jofh76334 жыл бұрын
Have you got another DI cassette you could try? A failing DIC can cause misfire
@JonasKakarikas4 жыл бұрын
For sure I know what could cause a misfire 👍 in this case I got Higher mair than mreq which means that it gets more air than it requests. So either The software is corrupt/wrong, wastegate on The turbo failing, or a failing maf sensor.
@anderssteen32164 жыл бұрын
@@JonasKakarikas Jag skulle ha testat med en ny original tändkassett, har du rätt tändstift i med den motoreffekten? Löste mitt problem jag hade. 😊
@JonasKakarikas4 жыл бұрын
Självklart rätt stift 👍
@niklasmatsson90494 жыл бұрын
Vad har du för procent på toningen fram? :) såg bra ut och sugen på samma på min 9-5 aero 😊
@JonasKakarikas4 жыл бұрын
20% bak och 35%fram 👍 blir kanon
@niklasmatsson90494 жыл бұрын
Tackar :)
@burakozay41634 жыл бұрын
Hello Jonas.i want to help me how can i find saab 2005 95 shock absober ? Do you know which sites am i looking for? Or what am i doing? My country too expensive or i couldnt find it.thank you;)
@JonasKakarikas4 жыл бұрын
Ebay should have plenty of alternatives or like autodoc.com
@burakozay41634 жыл бұрын
@@JonasKakarikas thank you ;)
@ceeF44 жыл бұрын
Great video as usual Jonas, is that an android head unit in the car? If so you could download Torque pro and connect it to your bluetooth obd2 dongle and get real time live data as you drive. Ross 👍
@JonasKakarikas4 жыл бұрын
Thanks 🙏 no its The oem Kenwood Navi unfortunately...
@ceeF44 жыл бұрын
@@JonasKakarikas could install it on your phone and view it live 😁👌👍🇬🇧torque-bhp.com/wiki/Main_Page
@aaaa-wv3hx4 жыл бұрын
Grymm video
@jofh76334 жыл бұрын
Try some thinners in fuel. Disconnect battery and reconnect then go for a drive!
@nashysi4 жыл бұрын
Hi there have worked why it is cuttng or spiking out on power? I've this problem for about a year ear now no on my stage 3 no tune ECU it always seems to spike when it has been driven hard for for a few minutes then after it's cutting out it's run fines driving again any ideas
@JonasKakarikas4 жыл бұрын
Put thinner in The fuel sounds really bad...
@paulreeves50124 жыл бұрын
Hi Jonas, can I ask what the app is on your phone?
@JonasKakarikas4 жыл бұрын
Car scanner
@adde04284 жыл бұрын
Bor du i Nybro?
@Isakandersson54 жыл бұрын
Mongecarlo gul 9-5a hade varit coolt😳
@rewoXofficial4 жыл бұрын
Han har lackat den i den färgen nu! :D
@saabturboguy3 жыл бұрын
crankshaft sensor???????
@JonasKakarikas3 жыл бұрын
Nope, leaking exhaustmanifold
@Erik-ii5rc4 жыл бұрын
Ser ut att bli ett grymt projekt. Du har en känsla för kvalitet som jag önskar att jag själv hade. Med 320 hp och 520Nm är det vad du önskar uppnå? För med lite enkel räkning utifrån det nedan angivna mreq på 1200 så bör du ju plocka ut ca 410Nm på e85 och 390Nm på 98.
@JonasKakarikas4 жыл бұрын
Den begär ca 1400-1500 när allt lirar 😉 denna videon så. Strulade ju något, misstänker wg
@JonasKakarikas4 жыл бұрын
Med ny turbo och lite andra mods ska ja landa runt 500hp 650nm
@louie7314 жыл бұрын
Are the rims on your car factory OEM or aftermarket?
@JonasKakarikas4 жыл бұрын
Aftermarket 👍
@louie7314 жыл бұрын
Does rims look very nice it’s a clean view I thought they where OEM for a second. what brand are they if you don’t mind me asking?
@JonasKakarikas4 жыл бұрын
I dont know about exact modell but Its lorinser replicas