Saab TurboX 3.6 Swap | Part 2: Tearing Down the Old Engine!

  Рет қаралды 475

Edson-Pouchie

Edson-Pouchie

Күн бұрын

Пікірлер: 43
@kingmeshech5527
@kingmeshech5527 3 күн бұрын
Those rod bearings was definitely takin a beatin
@jackkilroy1270
@jackkilroy1270 3 күн бұрын
Keep going Eddie ! Inspiring me to do the same with my car😢😂
@Edson-Pouchie
@Edson-Pouchie 3 күн бұрын
Do it! 3.6 swap the world
@ct2puertorico820
@ct2puertorico820 3 күн бұрын
Good shit bro can’t wait for this channel to grow with no limit 🔥
@TawanSaenraluk
@TawanSaenraluk 3 күн бұрын
Florida with a 3.6 Saab is gonna go craaaazy
@Edson-Pouchie
@Edson-Pouchie 3 күн бұрын
I’m over the snow it might be happening 😂😂
@RyanHar-r9v
@RyanHar-r9v 3 күн бұрын
Super excited to see this thing finished💪 keep it going bro, you’re motivating me to keep my build going and not give up🤘🤘
@Edson-Pouchie
@Edson-Pouchie 3 күн бұрын
We don’t give up bro! Get it done
@RyanHar-r9v
@RyanHar-r9v 3 күн бұрын
@ yeah brotha I’m swapping a 2.8t into my 2006 Cadillac STS which originally had the 3.6 and is RWD. Engine bolted directly in with my oem RWD mounts and mates perfectly to my trans. Now I just have to actually build it😎 I’m just starting to get everything set up to be able to complete this project but it’s also snowy and freezing where I’m at so I have been pretty slow recently. I’m 100% starting the build within the next couple weeks tho and I’m very very excited.
@Edson-Pouchie
@Edson-Pouchie 3 күн бұрын
What intervals are you using? What rods and pistons?
@RyanHar-r9v
@RyanHar-r9v 3 күн бұрын
@ probably going to get some forged 3.6 rods along with the 3.6 crank and for sure the wössner pistons. Your 3.2 build was the one that inspired me to take on that project so that’s probably what I’m going to do to start. I honestly would’ve done the full 3.6 build but I like how thick the 2.8 cylinder walls are
@Edson-Pouchie
@Edson-Pouchie 3 күн бұрын
@@RyanHar-r9vI agree with you here. The thicker cylinder will battle flex which is something I may fight with in this setup
@MrMckenzie2403
@MrMckenzie2403 3 күн бұрын
Killin it
@Edson-Pouchie
@Edson-Pouchie 3 күн бұрын
@@MrMckenzie2403 that’s brother
@jackdonohue7130
@jackdonohue7130 3 күн бұрын
🔥🔥🔥🔥
@Rambophilly87
@Rambophilly87 3 күн бұрын
This is amazing bro what you be teaching on these cars I’m definitely learning something bro thank you and keep up the good work I can’t wait for the next video
@Edson-Pouchie
@Edson-Pouchie 3 күн бұрын
@@Rambophilly87 always appreciate you commenting and showing love bro 🤘🏾
@ttvxdrakness5593
@ttvxdrakness5593 2 күн бұрын
I moved from Cali to Utah and man the snow ain’t no joke
@Edson-Pouchie
@Edson-Pouchie 2 күн бұрын
Utah is way worse then here to I could only Imagine
@SolvingSaab
@SolvingSaab 3 күн бұрын
Fire video 🔥 I wonder if it would be possible to shorten up the intake manifold a bit? i think it will flow nicely, but its just so long to fit in the engine bay. A little fab work for a couple inches less could make all the difference in space.
@Edson-Pouchie
@Edson-Pouchie 3 күн бұрын
@@SolvingSaab that’s the thought or maybe get rid of the 45 on the runner and make it straight- I hear the g8 manifold will mock up better
@SolvingSaab
@SolvingSaab 3 күн бұрын
@Edson-pouchie Good thinking. Might be a good idea testing flow on both units before spending money on the fabrication. Either finding data or doing some sort of test to prove it flows better. Although one would assume the 3.6 should flow better because its a bigger engine requiring more air, the reality is it isnt always boosted like the 2.8s as far as i know. Maybe im overthinking it 🤣
@papergatorzfedducca7998
@papergatorzfedducca7998 Күн бұрын
In some future videos can you share some tips to check for low oil pressure in these? I have a 2010 Camaro 3.6 sitting in my garage and I did everything trying to find where the oil pressure was leaking out and couldn’t. I put a brand new crankshaft and rod bearings.
@Edson-Pouchie
@Edson-Pouchie Күн бұрын
@@papergatorzfedducca7998 will do! That’s common for the engine.
@papergatorzfedducca7998
@papergatorzfedducca7998 Күн бұрын
@@Edson-Pouchieok bet new subscriber and a like bro!!🔥🔥🔥💪🏿💪🏿💪🏿
@i3randoll
@i3randoll 3 күн бұрын
💪🏽💪🏽💪🏽
@oshdagod5565
@oshdagod5565 3 күн бұрын
That mani bout to breathe lol
@Edson-Pouchie
@Edson-Pouchie 3 күн бұрын
Way better!
@Aric_J
@Aric_J 2 күн бұрын
the damage on the mains is probably left overs from the rod bearings,
@Edson-Pouchie
@Edson-Pouchie 2 күн бұрын
@@Aric_J 100% that’s the shit from the rods running thru the engine.
@rvarsigfusson6163
@rvarsigfusson6163 18 сағат бұрын
This V6 is it a GM or is just a ISUZU engine. What other cars are using this V6 engine?
@Edson-Pouchie
@Edson-Pouchie 18 сағат бұрын
It’s a GM there’s a big platform of these motors If you Wikipedia ly7 it’ll show 20+ cars To name a few Cadillac CTS - SRX/ gmc Acadia / Pontiac G8
@rvarsigfusson6163
@rvarsigfusson6163 7 сағат бұрын
​@@Edson-Pouchie Have been a fan of caddy V6 but was not aware it was a caddy one..... nice to know..... THANKS.
@Edson-Pouchie
@Edson-Pouchie 6 сағат бұрын
@ yep it’s the same motor
@tturner200
@tturner200 3 күн бұрын
When the hair up you know shit getting serious 😈
@Edson-Pouchie
@Edson-Pouchie 3 күн бұрын
@@tturner200 yah one real fish bro
@Christdeliverme
@Christdeliverme 3 күн бұрын
Comment for algorithm
@Edson-Pouchie
@Edson-Pouchie 3 күн бұрын
@@Christdeliverme you the best
@MDKawser-c5x
@MDKawser-c5x 3 күн бұрын
Sir, are you a new KZbinr, your KZbin channel is not getting views, then what is the thanks? You can increase organic views of your KZbin channel through SEO if you want. I am a digital marketing expert and KZbin video SEO expert. you can grow your channel with my help thanks.
We Swap a Superbike Motor into a Lada
18:01
Garage 54
Рет қаралды 472 М.
Andro, ELMAN, TONI, MONA - Зари (Official Audio)
2:53
RAAVA MUSIC
Рет қаралды 8 МЛН
«Жат бауыр» телехикаясы І 30 - бөлім | Соңғы бөлім
52:59
Qazaqstan TV / Қазақстан Ұлттық Арнасы
Рет қаралды 340 М.
Looking inside an engine during cold start (-30 degrees)
15:30
Garage 54
Рет қаралды 4,1 МЛН
Saab TurboX Gets A 3.6L Swap! Part 1 Tearing It Down
4:25
Edson-Pouchie
Рет қаралды 848
I made a 4-cylinder engine, from scraps, which were thrown away
34:05
TurboX Build Breakdown! + Dyno pulls & Draggy runs .
4:47
Edson-Pouchie
Рет қаралды 1,1 М.
When you give an 8-liter V10 a big lumpy cam 📈
16:45
Four Eyes
Рет қаралды 2,2 МЛН
Alfa Romeo 164 vs Saab 9000. Internal use only.
14:26
Marcus & Manuela ́s Saab Channel
Рет қаралды 1,7 М.
I Fixed this SUPER Rare SAAB for Just $100 BUCKS!!!
17:41
Car Wizard
Рет қаралды 85 М.
Andro, ELMAN, TONI, MONA - Зари (Official Audio)
2:53
RAAVA MUSIC
Рет қаралды 8 МЛН