Planswift 10 | Wall Area by Linear Tool | Template | Advanced Properties | Level 2

[@SaadyChohan]

👇PlanSwift Advance Template kzbin.info/www/bejne/epLXlYiBjZuId7M

[@zarowalk1045]

Why A0 papers are clear when we zoom to measure it

[@SaadyChohan]

Check a video *PDF to Tiff* on my YT channel. For more questions, contact me through Insta. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan

[@JuanGalvan-v5n]

Dude, thanks, you are one of the best on KZbin regarding the explanation of how to use planSwift!

[@SaadyChohan]

Thanks for the feedback. Stay connected: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/

[@abdirashiidmohamud3399]

thank you dear engineer saady. Am still student i wanted to joint your classes but no enough money so am following you here dear

[@SaadyChohan]

Stay connected and keep learning. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/

[@patrickugwu8866]

Thanks @Saady Chohan for another smart video on Wall Taking off using PlanSwift. 👍

[@SaadyChohan]

Thank you for the positive feedback @Patrick ugwu

[@ExploreMiddleEastwithme]

Whatever you takeoff qty for wall area comes end in Linear meter actually.. Only unit varies... Please explain

[@SaadyChohan]

Please watch this latest video to understand the Masonry work through PlanSwift. kzbin.info/www/bejne/mHeanKSpeNN8hZI Connect through these application & stay updated: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ www.reddit.com/user/SaadyChohan twitter.com/SaadyChohan

[@lorensanchez5126]

Hi, do you have any idea why whenever I use wall area tool I get the length unit instead of the area unit?

[@SaadyChohan]

I will recommend you watch this video completely with patience. It will cover all your doubts about PlanSwift. kzbin.info/www/bejne/rpnCmX6Jm7uXndUsi=xvxxGgB9ctWMtbQW Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan

[@nawazahmed8433]

Hi Mr. Saady It is possible to show the label with 2 options (linear meter and square meter) And also in estimation sheet so we use in multiple puropose like skirting, paint and plaster

[@SaadyChohan]

1) Area and Linear can be shown in one label. Check the very first few videos on YT. You'll get the answer. 2) Linear can be shown in estimating tab by adding a column *Linear Total*. Connect on Insta & Facebook: instagram.com/saady.chohan/ facebook.com/SaadyChohan.AEC Stay connected & keep learning 😊

[@rvzenteno]

Hello, how can a vertical linear item be configured in the advance properties (or if there is another way) so it can be in either a Template or an assembly? I'm specifically looking for Plumbing Risers. Thank you in advance.

[@SaadyChohan]

There are many ways. You need to understand the template and customization concept first. Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan

[@saraz4187]

@@SaadyChohan Can you share the link to the video. I have the same question but can't find anything in your videos regarding this. Thanks

[@atodanh963]

Thanks for sharing, and can you make a video tutorial on drawing area and straight lines for objects with curved contours?

[@SaadyChohan]

Thank you for your suggestions, soon you will see more videos on my channel. in the mean time, you can also check out my playlist for quantity surveying works. Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan

[@ADLMStudio]

Thanks @saddy, please how do i deduct Wall openings such as windows and doors from wall area

[@SaadyChohan]

Dear, I haven't shown in this video. Very soon, I will share a video on the same channel. Stay connected.

[@ADLMStudio]

@@SaadyChohan thank you very much

[@SaadyChohan]

Welcome 😇

[@ethanellis5668]

How do I add linear sf to an existing digitizer area takeoff? So that they are added together. Thanks for the videos!

[@SaadyChohan]

Customization. Check PlanSwift template playlist. Stay Connected. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/

[@rahidmullas4575]

thank you for this wonderful video. i followed the same steps but still area is not getting displayed on the left hand side. the unit is sqft but its linear quantity measurement is given. pls give me resolution.

[@SaadyChohan]

Thanks for Watching. Let me share a playlist of other templates. Try to follow that and let me know if you succeed. kzbin.info/aero/PLUyBVnwitx_Y6fQSxRzfPMoGUgDigB7QZ Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan

[@civilmaster8810]

plan swift always shows one result at one time, how can we gain two results at the same time like wall area for billing and wall volume for material estimation

[@SaadyChohan]

Add Qty 2 & Qty 3 Stay connected and keep learning. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan

[@mzorkea]

if you are taking wall length, wall width and wall height, wont the result be in cubic meter instead of sq. meter?

[@SaadyChohan]

Wall Width is just for appearance. It is not multiplying with Takeoff. This video is very old. Please check the Playlist of Template, You will learn new & advance PlanSwift templates. kzbin.info/aero/PLUyBVnwitx_Y6fQSxRzfPMoGUgDigB7QZ Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan

[@mzorkea]

@@SaadyChohan sir pls guide where can i check what is being multiplied

[@SaadyChohan]

In advanced properties

[@majidabujalil3088]

When on 2D, How to subtract doors areas? How to treat arched opening? Thank you in advance.

[@SaadyChohan]

I will recommend you follow QS Programme. I have shown in Masonry Quantity Surveying Ep#15 about it. Given the link will help you. EP #15: QS Programme Masonry Quantity Takeoff by PlanSwift ▶️kzbin.info/www/bejne/mHeanKSpeNN8hZI 📢CONNECT www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ www.reddit.com/user/SaadyChohan twitter.com/SaadyChohan

[@kuranam]

What about if you have a lot of types of openings? I mean, doors with several widths or windows with different dimensions

[@SaadyChohan]

Check episode #15, I have explained this point. Contact me if you have questions. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan

[@be-honestindian3054]

Nice video well explained sir

[@SaadyChohan]

Thank you for the positive feedback :)

[@syedaiqbal4023]

MasahAllha vary nice and so good dear Saady

[@SaadyChohan]

Thanks for liking

[@shafsareem562]

You have missed about the wall area deduction and please give a guidance how to deduct area using template mode

[@SaadyChohan]

I haven't missed it. This template was only for basic SQM. Please check the playlist of the template for more details. For more information, Send a direct message. instagram.com/saady.chohan/

[@shafsareem562]

@@SaadyChohan thanks appreciated

[@awaz-e-kurb]

Sir while calculating paint or plaster quantity how could we exclude door and windows if we are using linear as you taught.

[@SaadyChohan]

Thanks for watching. very soon i ll show you an amazing formula that can help you. stay tuned dear :) @Israr

[@dheerajentertainment3773]

@@SaadyChohan waiting, need to learn how to deduct doors and windows from wall area

[@SaadyChohan]

I already have a formula and very soon I'll make a video on this topic in detail. Please stay connected :)

[@awaz-e-kurb]

@@SaadyChohanThanks Sir will be waiting anxiously.

[@SaadyChohan]

Meanwhile, try to watch other videos and learn more :)

[@be-honestindian3054]

Sir how to calculate bbs in this software...is it possible and what different type estimation do here

[@SaadyChohan]

PlanSwift can help to measure the takeoff only but bbs is more of calculation. Soon i ll share a video. stay tuned :)

[@theslickking-majura5799]

Sir under linear properties there is "metric wall area" kindly tell me when that is used, your early response will be highly appreciated

[@SaadyChohan]

Send screenshots through private message. I'll try to answer. instagram.com/saady.chohan/ facebook.com/SaadyChohan.AEC

[@junaidmajeed8317]

I think that's a wrong formula in first place, you see both linear measurement & area calculated later are almost same, even after you had 88m of linear length, area should be (88*.2=17.6) in first place , even after you adjusted the width the linear length changed to 18.8m so area should have been (18.8*.2=3.76 sqm) which isnt in this case, You didn't change the formula in QTY tab which in this case should have been [Takeoff]*[Width], because we already have linear measurment & only need width of the wall and in case of vertical area Width/thickness can be taken as Hight because in both cases we already have breadth of the wall

[@SaadyChohan]

Thanks for watching.

[@Construction_CE]

Thanks so much Saady

[@SaadyChohan]

😊 Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan

[@juliusachi2360]

How do you delete that file test you created.

[@juliusachi2360]

Have seen where to delete the file.

[@SaadyChohan]

I hope you got the answer already. Feel free to contact through LinkedIn or other social media application. I will try my best to support you :)

[@alamopps1517]

Hi, Saady ! Thanks for the Tutorial. Is there a way to change the line transparency in this function? I have a transparency slider, but it does not move. Version 10.1.1.8

[@SaadyChohan]

Its possible, contact me through the given link. I will guide you. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/

[@skillsforallchannel]

Thanks ... very useful information... ✌🏼

[@SaadyChohan]

Thanks for watching and giving positive feedback! Appreciated. 😇

[@jayantanath1260]

how to deduct the door window from this wall area?

[@SaadyChohan]

There are different ways but for all of them, you have to prepare a calculation formula. 1) Create a formula in an Excel sheet 2) Create a formula in the PlanSwift. Soon, I will upload a separate video only for door/window deductions. Stay connected & keep learning.

[@jayantanath1260]

@@SaadyChohan Thank you for your quick reply. Actual we , the all estimator, as you already know that, using excel very well in all day. But I wants to know that, how we use the plansift maximum level, without depend on MS Excel.

[@SaadyChohan]

@@jayantanath1260 Thanks for watching. It's True. Estimators & Engineers know Excel very well. Soon I will upload a video about Door/Window Calculation by PlanSwift Software.

[@SaadyChohan]

As you might noticed, I have started a Quantity Surveying complete program where I have shown Earthwork, Concrete, Formwork & Steel etc. The next one will be blockwork and there I will provide a template of the door and windows. Stay connected to QS Programme. kzbin.info/www/bejne/l6q8f2OmoKl4rdk

[@amirwaziramirwazir]

Sir please Tell Me In this tutorial sir you have not multiplied the takeoff with wall height Estimating=Takeoff*Wall height but you have just done this as Estimating=Takeoff Sir please check it i am confuse in this point

[@SaadyChohan]

Thanks for watching. You are right. I forgot to multiple and that's why I mentioned it in the description.

[@amirwaziramirwazir]

@@SaadyChohan thanks Sir g

[@chandbasha1243]

i tried same procedure, but still iam getting in Linear meter quantity only.

[@SaadyChohan]

I assume you miss something. Please watch completely. It's a very simple procedure. You can contact me on Linkedin if you have any doubt.

[@chandbasha1243]

@@SaadyChohan Iam using old plans swift software. Due to this I think iam not getting results. I literally done same procedure several times. But got only linear meter takeoff

[@SaadyChohan]

It could be the reason. I'll recommend you to use the latest version.

[@SaadyChohan]

⛔️ PLEASE NOTE ⛔️ At 5:16 I forgot to Multiple by Height that's why the result is incorrect. Correct Formula: Qty = [Takeoff] * [Height] Let me know if it works.

[@luisacosta6548]

Nice

[@SaadyChohan]

Thanks for commenting. 📢CONNECT www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan

[@stephenobour1134]

Please can I have the link to download planSwift

[@SaadyChohan]

Thank you for watching. Please refer to this video for information about the trial version. kzbin.info/www/bejne/lZPCoXaXe9OthNk Please do reach out to me for more queries. Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan

[@mohammednawazbs553]

How do we deduct doors?

[@SaadyChohan]

Checkout the video: kzbin.info/www/bejne/hJ7NdZ1neJpqoZI Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan

[@DurgaPrasad-dp113]

Good video

[@DurgaPrasad-dp113]

How to deduct in deduction area like doors and windows pls explain

[@SaadyChohan]

Very soon i ll upload a new video specifically about the deduction of doors and windows. Stay connected.

[@SaadyChohan]

Thanks for the feedback

[@DurgaPrasad-dp113]

@@SaadyChohan thank u

[@MrGrim-xx4rn]

still in meters, after following the video step by step

[@SaadyChohan]

I recommend watching this video. kzbin.info/www/bejne/nn61p4Gef52ag6csi=gOF10dQJKnvyUc0-