SABIAN Factory Tour - Part 2

A tour of the SABIAN factory in Meductic, NB given by Robert Mason.

[@wendepic]

That was just awesome to see how my cymbals get through the fatory

[@ThrowingItAway]

I love Sabian and very few cymbals from other producers have measured up to their quality and sound. I proudly play ONLY sabian and I'm proud that they're Canadian.

[@AndyJanssenMusic]

Love them for their sacrifice. Sabian Cymbals are amazing!!!

[@marcioisrael4772]

Apaixonado pela SABIAN 💙💙💙💙💙👏 VALEU.BRASIL.

[@chickenbeforeegg]

I love the sound of cymbal's being lathed. I love cymbals in general! I

[@davypeep]

I love the little squishy logo stamp, looks like a marshmellow :D

[@marcioisrael4772]

Love SABIAN .BRASIL

[@halonerd04]

man now i want to buy a drumset just to buy these cymbals very nice looking and prolly sound nice :)

[@weevilboy]

man do I love the sound of an HH sabian...

[@japaobatera4476]

impressionante caramba muito massa brothers!!!

[@11111phil11111]

Thanks a lot for making this video. 5 stars

[@samtattooargentina]

awesome factory and final product =)

[@slickvick456]

Sabian is BEST! I like the variety of sound they offer you. Paiste are cool 2, it' just that their theme is more for vintage sound than modern.

[@SonOfChrist93]

So I'm not the only one that noticed. The drum store I use specializes in Sabian and they have a similar poster up in the cymbal room.

[@deliciousmentalfudge]

Is the 'Sullivan' poster behind Mark Love Jimmy Sullivan?

[@sergiodrumeando]

It depends on the model, i.e. most AAs are fully lathed while many HHs and old Radias are not. Riding an unlathed bell brings nice colors to the sound, for example alternating between china and the ride's bell with the shoulder of your drumstick (think Lamb of God)

[@ThrowingItAway]

@MegaDrummer4ever they do some times I think? all I know is that I'm Canadian and I love the sound of Sabian which is Canadian as well =) there's also a large amount of cymbals the don't make the cut... also think of how many cymbals they produce and selll

[@alvarorojas2516]

SALUDOS DESDE CHILE .. SUPER BUENOS LOS PLATILLOS SABIAN ..

[@BestialVisage]

Yea, that's where the low end sheet cymbals come from. (B8's, ZBT, ZXT, etc.)

[@DonCYHaute]

i think they do the bell seperately depending on whether its meant to be lathed or not.

[@barbarajmay]

I don't get why everyone debates over which cymbal/drum brand is superior. If a cymbal sounds good to me, I'm going to buy it, regardless of brand.

[@blica1]

canada rules eh? they make sabian cymbals, and that's freaking cool , eh ??..i love being canadian , and even more ,so the fact that sabian is in canada makes me even more proud !!

[@NocturnalSurgeon]

Oh my god !!! It´s ORGASMATIC !!!!

[@SabianVault]

Yes, the shavings from lathing and the shavings from edging are all recycled by melting them down into new B20 castings.

[@Davidjamespinnock]

@16acog, yes, in theory no two cymbals will ever sound the same.

[@deliciousmentalfudge]

@MegaDrummer4ever they do, but you need to get them from a catalogue, i believe

[@tomthejackass6000]

Jesus i never knew that much work went into making cymbals awesome though

[@DeathswingKettlebell]

i think they lathe it first, then punk the holes, and then it goes around in the process or something. idk

[@Halo4Profesional]

6:50 and beyond, sabian has a poster of The rev!! :)

[@synthesaurus]

sabian could engrave serial # and model on their product, so that when the logos disappear one can still tell what that cymbal is.

[@TheTechAndScience]

synthesaurus Art doesn’t have a serial number I guess

[@antonminchuk9922]

Czechoslovakia? It doesn't exist since 1994. They are two Czech and Slovakia now

[@Salzcamino]

would you recommend Meinl? I'm still looking to buy cymbals, my main considerations are Paiste, Meinl, Sabian, and Zildjian. All great with a wide variety. Very hard to choose!

[@synthesaurus]

the rejected china @5:45 sounded better

[@UlyssesYarbrough]

I agree

[@logansdrums]

6:36 the posters in the the back R.I.P jimmy...

[@1dudecrush]

BRING BACK THE OLD LOGO

[@abarragan2973]

The same guy that tested my cymbal 20 years ago probably tested the one I bought a few days ago. Mind blowing! Love my sabians! 14" AA regular hats 16" AA medium thin crash 18" AA medium crash 20" AA medium ride 14" HH evolution china 18" AAX china 8" AA splash

[@briang6040]

Cool bro...I have AA 14" El Sabor Hats AAX 18" Explosion Crash (2) AAX 18" Aero Crash HH 21" Raw Bell Dry Ride

[@A7X4evrr]

Damn i didnt see ur post right before mine.

[@jangtheconqueror]

At the Paiste Factory there's no mess-ups

[@DDrummr41]

most of sabians bells are raw bells..thats why their not lathed..it gives them a different sound.

[@proto35]

sabian is indeed the best cymbals in the world

[@spongebens]

are they cheaper if you buy the cymbals straight from the factory. if so, around how much cheaper?

[@lesliefrancs]

I'd make a reverse RBDR. Stick def. of the raw bow and the lathed bell gives ping....

[@dsordlyfolks666]

5:44 Sure it's not the same as the other one, but it doesn't sound that bad. I actually like it more.

[@ThrowingItAway]

omg 6:37 there's a post of the rev in the background......

[@probablyastapler]

so cool

[@4thwatcher777]

Czechoslovakia? This video took place a LONG time ago

[@ikzmod]

@ 6:32, is he using a Weckl signature Vic Firth? hehe

[@dtgfh]

I want more than the 12 i have already

[@crazyjake29]

4:20 best job in the world!!

[@GARfredable]

if there was a third part to this, my cymbals would be twice as expensive :/

[@gtrocksyosocks]

I wish I could work for Sabian just to get discounts. HHX! :D

[@gustavorocha78]

The logo on the PARAGONS are painted too?

[@JacoboCastroCristo]

I have an aax studio crash that is heavier on one side.

[@4thwatcher777]

@IronFabianSteel He did says craft. It takes years to master cymbal crafting

[@Salzcamino]

Are those RBDR by the way??

[@baumannecek]

He's talking about export to Czechoslovakia. This country hasn't been existing for more than 17 years!

[@jangtheconqueror]

I wanna see how K Zildjian Hybrids are made

[@CCConservatory]

This guy's been lathing for 20 years. He must be exciting at a cocktail party.

[@fubartotale3389]

what do you do? Chartered accountancy?

[@DylanHaas610]

if i lathed cymbals, i'd make a custom cymbal with a raw bell and raw rings around it.

[@apinakapinastorba]

How old is this video? He mentions Czechoslovakia, that separated in 1993...

[@jonasdrema]

Totally. HHX>K, but the price is the same.

[@A7X4evrr]

6:45 THE REV!

[@ncavoto96]

where is the factory?

[@Salzcamino]

Alright, really sorry about your mom, didn't mean to touch that nerve :(. RIP. You just started out so violent, and for your information, I don't like fighting on stupid issues. I actually loved what he said and you misunderstood me. And what exactly do you mean by "Your tough" O_o On another topic. You play Sabian? :D

[@bikestunts123]

@grrrwaffles me!!!!!

[@KeyboardWarriors]

Dear Sabian, if you ever create a cymbal that you don't like or it is defective, please give it to me. Thanks. Sincerely, Joe

[@iJustDrum]

3:21 truth at its finest.

[@xxmlhedxx]

no wonder why it takes 4-6 weeks on replacements!!

[@drummingdude47]

i would love to stay inside area 51 and i'd tottally party with that dude who works in the vault

[@JeroenMusicVideos]

I want a drumkit consisting only of Area 51 cymbals :)

[@Yaserman]

5:15 ; And if they don't like the one that I don't like well, that's how the B8 are made.

[@SandbagBouldering]

I want the lave guy to make my cymbal!

[@rimshots_only]

Dear Sabian. There is no Czechoslovakia anymore since fall of ZSRR :D There are Czech Republic and Slovakia, two different countries.

[@fubartotale3389]

Chechia apparently these days.

[@windexfighter77]

@sxedrummer320 I probably would too, but I bet they get pretty good discounts lol

[@bikestunts123]

@grrrwaffles or the warehouse.

[@zerodarkzone]

@WiLLPS31 man, if you have the money sor a zidjian k set, then I recommend you to buy sabian hhx´s

[@jamessimonb]

1:39 "after might look easy to do, it takes years to master this... ...crap." haha

[@blica1]

i guess all of the shavings from the lathing process are all recycled ??

[@SuppiCZ]

Czechoslovakia?!?! It´s not for 20 years!

[@rooseveltsbones]

Sabian's are basically Zildjian's with personality. Ziljdian started it, but Sabian is actually still doing it. I own 2 HHX crashes and It was cool to see the Hand Hammering in part one.

[@Adonisking4911]

8:24

[@antibulletdodger101]

that sound-testing dude must be half deaf by now.

[@Lolman240]

wow doing that for 20 years gets really repetitive, how does he do it?!

[@Plangentry]

@grrrwaffles i'm in!

[@dartthewarrior]

can u make me a 21" and 22" evo ride?? PLEASE!!!! XD

[@MasonBangsDrums]

If the tester guy doesnt like the cymbals, dont melt them, just give them to me! im not picky :)

[@Brem101]

I'll take a raw one please.

[@nazzare79]

WHY DON'T YOU MAKE AAX 22" STUDIO AND XPLOSION RAW BELL (NOT DRY) RIDES AND 19-20" XPLOSION CHINAS!!!!???

[@drummer9049]

i would so do that but i bet you that the place is guarded super tite

[@DylanHaas610]

uhhhh...sure? haha im not sure what they look like but i'll agree with you

[@fubartotale3389]

In every one of these videos they say "this might look easy".... seriously? Not to me! One slip and you've gouged the cymbal, take off too much and it's scrap. It has to end up at a certain weight, thinner at the edge and bell than the middle, all without being able to measure it.

[@hughman174]

first comment, great vid. go sabian

[@japaobatera4476]

🇧🇷🇧🇷🇧🇷✌👍👌

[@Golfingwithvince]

this job would be epic to have altho i prefer zildjian cymbals

[@Salzcamino]

sweeet!!!! MB20!!! Those sons of a b**** have some killer crashes and hi hats! the byzance isn't bad either, specially the brilliant ones. I'm not in for the jazz or the extra dry ones though ^__^

[@ArcticOverlord6]

6:40 JIMMY SULLIVAN!!!!!! RIP

[@tamatitan21]

give me one of those dark aax chinas~! haha

[@Alatinjazz]

Hello ... I'm Venezuelan and I go to jail to manufactured Sabian cymbals, but do not give me food, I just want all different types of cymbals ... Laughs!

[@SteelSquishy]

1:38 i always thot he said "Craft" but that dnt make sense. Lol he must not like his job.

[@SvenHegedus]

wants to purchase reject cymbals xD