Sagola 4600 Overland Adventure Special Edition

[@peterpearce8489]

I’m sure we’d all love to see a video/review on 46v and 46g alone. I know they give a lot of people some serious trouble. We’d all really like to see your take on those paint codes specifically! Love your work man keep it up!

[@mitchellferre1652]

I love Sagols 4600s ! It's a bazooka ! 💥👍🏼

[@alanjones99]

Hell yea brother love my sagola trophie trucks edition 👊

[@EladEloc-el8vo]

Keep up the vids.. I learn something every time I watch them.. good work

[@mikeammargon6847]

THE 4600 IS GOING FOR MORE LIKE 700 USD.. STILL A GREAT GUN.. GREAT VIDEOS ALSO..

[@craigwhited2538]

I use a Sata 5000 RP with a 1.4 for the candy. VM350 in 530 clear.

[@blademan4043]

I use 50 micron strainers with certain paints. They are hard to get (not to many places offer them) They do wonders for paints with strange pigments that don't won't dissolve.

[@jefeholmes2318]

Would love a video on how to control dust ‼️‼️‼️ thanks‼️

[@poman8772]

Thanks Gunny!

[@sajh4280]

Another lovely job mate👍🏼

[@ANDY-we7mr]

Lovely finish gunny what a cracking job well done this is why iam subscribe to your channel loads of helpful information are you going to do the top 10 base coat paint guns

[@mydogzty]

On another note of feedback the intro song has held up I believe. And keeping it the same shows how original your content is in a good way cheers

[@andrewntoth1]

The 4600 is a nice gun! . The ring that's on the trigger to move the fluid tip annoys the crap out of me though 😳 (I'm a bit ocd with cleaning) .

[@ChrisBaker-i2t]

Hey mate, great channel and I have learnt lots. I’m going to attempt a respray on a Vw beetle. I noticed you use lots of different brands of paint but can you recommend a good brand for 1st time painter for epoxy through to clear coat that is available in the Perth area? Thanks again Chris

[@freshprince1987]

Looks amazing

[@peterpedro9386]

46v soul red is a cool colour. Its less expensive than candy aswell.

[@JohnWD40TC02]

Hi Gunny, great video as always mate I've always wanted the Sagola 4600 but for some reason I never got one, they do look nice guns and lay the clear very flat it's just a shame that the prices are so high these days. My Sagola RC1 reg also went wrong a while back, I was wondering why my finish was peeley but it turned out that the RC1 was reading high🙄 You were using PPG in this video Gunny so this must have been at your other shop as you are using Standox now🤔don't tell me you have moved again😨😂John UK

[@g_force3857]

Good review Gunnie…..

[@slackerzsincity8822]

That looks clean

[@rudinew4412]

Hello mr.gunman 1 ❤ youu...😊

[@christophercorfe6513]

Could we get a review on the finer core guns by meiji?

[@MrPacman1974]

Comprei uma á dias e ainda não usei. O que recomendas para começar a usar?

[@joe2.017]

What is your preferred gun for sealer? I feel like alot of my peel is due to my sealer. I'm spraying a tekna copper with a 1.3, using ppg sealer. Any tips?

[@kenboxx265]

May i ask do u turn that air valve on the sagola all the way open or is it in he middle. I'm having difficulty with mine. The valve on bottom of gun? Thanks!

[@ivancaicedo8634]

Para capas de esatinta cuantas manos serecomiendan

[@1965wenus]

hello, can you give me the model and marking of the compressor you use?

[@EladEloc-el8vo]

Is there a Gunman edition Flg5?

[@douglesley922]

Hey Gunny! We paint furniture here in the states with precat lacquer your tips and advice have really helped the last 3-4 years , eventough we spray very different products the advice still transfers. Love my flg5's and my prolites as well. Even have perfected my craft with the Supernova novas. I as of this week have bought a sagola 4600 one for base, one for clear. Thanks for all the tips and hints! Just searched your page for a paintsuit couldn't find one.. Just out of stock?

[@leahmay1011]

What's your ideal wet on wet sealer gun for flat finish

[@TheGunmanChannel]

I've been using the sagola, but mainly because it doesn't have any plastic seals and wet on wet is a bit rough on guns

[@leahmay1011]

@@TheGunmanChannel .3 fluid cap

[@TheGunmanChannel]

@@leahmay1011 I've been using the 1.3XL, beast of a gun. Please take some advice, don't buy one until something new comes out in about 15 days. (I'm not meant to say that)

[@leahmay1011]

@TheGunmanChannel thanks man

[@mcats8]

Your shop switched from Standox to PPG?

[@iEvocate]

That must be a different shop. The mixing room doesn't look anything the one with standoblue

[@ruben9388]

@@iEvocatehe said he re arranged the mixing room in another video

[@masonhunt3462]

When are you gonna tell us about switching to ppg??

[@TheGunmanChannel]

I just did 😁

[@darekw325]

👍👍

[@AirPavel]

😍

[@bradmccoy4006]

Sata RPS Adaper #3 125252

[@esijamali7304]

👌👌👌👌👌👌👌👌👌👌👌👌💪💪💪💪💪💪💪💪💪💪💪💪💪👍👍👍👍👍👍👍👍👍👍🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏

[@TheDopeShow81]

I just left a shop that was a sand pit... I watched this guy do 200 nibs on a rear bar. What a joke this shop was lol

[@TheGunmanChannel]

It's crazy, there's just something about this shop. There's dust floating everywhere

[@Farid_putra_motor]

First..from indonesia...

[@dinjayaautospray938]

From Malaysia

[@NareratSernthung]

Fc

[@dinjayaautospray938]

First😂

[@fredg4785]

Is spraygunsdirect legit ? Anyone know how much shipping is to the US ?

[@TheGunmanChannel]

They're definitely legit, ship fast, like 2-3 days to the USA, generally they use DHL express and it's about $25-30 USD delivery cost.

[@fredg4785]

@@TheGunmanChannel which regulator do you recommend?

[@TheGunmanChannel]

@@fredg4785 I recommend the ANi gauges, be a little careful with the thinners, it can seep in and ruin them, but if taken care of properly they'll last years. $23 USD www.spraygunsdirect.co.uk/product/ani-pressure-gauges-regulator/