Reupholstering a Vintage Car Door Panel

[@garygerard4290]

'Narrator gets an A+ for explaining everything very well. Thank you for these videos I ordered a Fabricator yesterday.

[@SailriteDIY]

Thank you for your kind words! I'm glad you found the explanation helpful. Enjoy your Sailrite Fabricator Sewing Machine!

[@yellowtr6]

All of my upholstery work is doing interior panel kits for the classic British Sports car the Triumph TR4 and TR6 so I have two suggestions for your video. The vinyl gets cut about 2" larger than the card but the foam should get cut the same size as the card. This eliminates the bulk that you're showing that can affect how the panels will fit. When you're using upholstery or headliner contact cement, wait for it to flash and feel dry to the touch and then put waxed paper on top of it. Now you can lay the other piece on top of the waxed paper and position it perfectly without fear of things sticking together. Once the pieces are aligned, slide out the pieces of waxed paper.

[@carsbikeandmusic1236]

Absolutely correct .... as v r manufacturing trims here in delhi india .... v do same

[@seinarukishi9228]

What about shrinkage from the sewing? when sewing leather to closed cell I have came around a quarter inch short on all sides vertical to stitching when doing stripes similar to the ones in the video. Good advice on the adhesive, I have had mixed results depending upon the adhesive brand though.

[@jraposo911]

Yellow tr6 can you recover my dash for me . Vinyl or leather. It’s all cracked . 71 Lemans 😊

[@corinnegeddings4667]

Getting ready to do the door panels and headliner in a 27 “T” coupe....this is very helpful! THANK YOU

[@AnthonyColebourn]

Brilliant video. So detailed and well explained.

[@inactive67]

When marking or cutting and having to move your straight edge, leave the pencil/pen or blade in place and move the straight edge.

[@larrystehle8746]

You have an incredible amount of bulk as you fold that 1/2 in foam around the panel and that could result in poor fit as you attach the panel to the car. Try trimming the foam to the panel before wrapping and attaching....

[@Sugarkryptonite]

Good idea! Thanks

[@tommybroughton2191]

for real

[@ARASHMAFI1]

Not to mention ½” being so overkill for door panels

[@OUTFXD]

"Car Door Panels... are typically found on Classic cars!" "We are cutting wholes where the Plastic Rivet inserts need to be inserted" We have very different opinions on what constitutes a "classic car" Great vid! Thanks!

[@samperras]

Thank you

[@wacherawaiganjo9938]

Lovely 😍!

[@SailriteDIY]

Thank you! 😊

[@marcussmith4913]

this is awesome bro. thank you I waNT TO see how to do velvet inlay work as well.

[@chuckgordon3693]

Thank You very informative.

[@countrysmurfcomedy3099]

💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾🔥.. Very informative, great tips..

[@itseasiertotakeitsomewhere738]

Those sharp staple ends have to go somewhere. Aren't you able to feel them on the outside? That cowl board is only 1/8" thick.

[@mikem3403]

Someone please let me know. If you were to not wrap the foam around the back, how do you keep the staple from coming through the front? Or would the glue be good enough to hold the vinyl?

[@thek.p4899]

Thats awesome great talent

[@SailriteDIY]

Thanks!!!

[@dyingforpie6879]

My door panels have a radius- straight ones are easy 😄

[@Banditemcee123]

GREAT VIDEO!! Could you show how to button tuft a door panel like you would see in a lowrider I would love to see how it's done if possible 😊

[@SailriteDIY]

Hi Bandit, We are planning on doing a video on tufting at some point this summer. I think we will be tufting a headboard, but the concepts should be very similar.

[@greavous93]

too much foam in the corner and around the edges. A door panel that wont lay flat when installed is wasted time and materials.

[@ARASHMAFI1]

Totally agree looks like crap. Foam should be cut the same size as the board so when the vinyl is bent over it has nothing glide in the back but the vinyl

[@evenemad5010]

Big thanks ❤️😊

[@exchaoordo]

Just the video I need! Do you think a regular sewing machine will have the power to do the sewing you're doing? What are you using for thread?

[@scottschmittmusic]

Neato!

[@GarageItYourself]

How would you go about doing a butt join of the two colours instead of using the additional strip of vinyl?

[@DMAX_DIY]

Pretty cool video my friends! Thanks for posting! I'm needing to make some stuff for my racing seat.. Good tips.. DMAX motion sim ch

[@joanneczaplicki4460]

Is this an industrial machine? Will a regular sewing machine sew through this foam and vinyl?

[@SailriteDIY]

I do not think a home sewing machine will work very well with this project, sorry.

[@TheHamadanners]

Mmm vintage

[@jacintolangi767]

you know what? you sound like Agent Smith in The Matrix ^^ i like your voice

[@DaRooMN]

Thought exactly the same XD

[@porroh869]

Strike a straight line Mr Anderson

[@tommybroughton2191]

where do you get this cowl board every site I look on it is like they dont know what I am talking about

[@CulinarySpy]

Where can one find the 'cal board' or whatever is?

[@davesoanes1649]

Cowlboard

[@CulinarySpy]

@@davesoanes1649 yeah that - where do you source it?

[@dyingforpie6879]

@@CulinarySpy did you get an answer? Just use 1/8 hardboard

[@siamese35]

Does this machine have a foot operated reverse and a thread cutter?

[@boarhog1979]

no. It will have a lever for reverse and is not an automatic machine. A Juki LU-158 which is a monster long arm machine uses a foot-operated reverse

[@boarhog1979]

at 635 you can see the push down lever for reverse

[@floridasaltlife]

You will find a much larger market when you start selling to car guys !!!

[@user-io8pz9ow8l]

🌷🌷🌷

[@MrJaespun]

Do you guys sell used sail rite machines?

[@SailriteDIY]

Sorry, we do not.

[@dsloop3907]

www.used.forsale/sailrite-sewing-machine

[@hasnaoldgmail8097]

@@SailriteDIY hello sailrite can i talk to you in private please !! I want to send you some pictures of what i make so that you encourage me please

[@SailriteDIY]

@@hasnaoldgmail8097 email me at [e-mail]

[@dijones2441]

😃👍

[@richlounder2465]

Totally wrong, the foam should never go behind the door trim, too fat and bulky. Cut the foam off to the board edge so that you only have the thickness of vinyl around the back.

[@mikem3403]

How do you staple the vinyl to the board without it coming through the front? Or would the glue be good enough?

[@user-mn1ws3uk6g]

👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

[@georgespapillon364]

Where can I get the car board ?

[@SailriteDIY]

Sorry, we do not carry it. I would search Google: "cowl board upholstery board"

[@user-mn1ws3uk6g]

❤️❤️❤️❤️❤️❤️❤️

[@terryblanchard8199]

Jh