Sakura D5 Clone Drift kit

Рет қаралды 1,327

9 ай бұрын

This is the D5 RR pro clone
Super cheap with all the carbon and aluminium extras for only $100
Amazing low cost competition KIT

Пікірлер: 24

@k1ortia 8 ай бұрын

New drinking game, do a shot every time he says "Umm"

@kelvinmrrc3289 6 ай бұрын

😅 thanks my guy , completely agree , I’m terrible with these vids , thanks for watching

@k1ortia 6 ай бұрын

@@kelvinmrrc3289 Nah you did great brother. Only having a laugh. Keep it up..😁

@user-to9zx1ds4o 4 ай бұрын

Thanks for the video, like others I've had difficulty finding info on the D5 clone. I have the MR which I'm happy with but I wanted the rear mount too, but couldn't find an original D5 within my budget. My clone should arrive in a couple of days but after watching your video I think I'll order a second one just because at $A160 why not? Cheers, Dave from Western Australia. 👍

@jasonchant 5 ай бұрын

Hey there! Just found this vid after lots of sifting thru international content. Finally an Aussie perspective on this "clone" D5! I'm the same as you (except I don't own a sweet 1/1 scale drift car 👍😋) having bought this roller as a cheaper alternative to enter the drift game. Got it recently but still getting it together. Spent two days shimming & thread-locking the whole car to help eliminate slop, and had wondered if the genuine 3Racing bulkheads were worth doing due to dubious plastic thread security, so thanks for answering that one 👊 And the poor quality spur gear teeth 🤔 I'm glad it's not just mine then! Thanks for your efforts to get some more information out on this machine. Plans for updates, running vids or longer term tests?? Cheers!

@kelvinmrrc3289 5 ай бұрын

Hey Jase, sorry for the late reply , glad I could help , unless your really focused on competing, then I’d probably hold of on the bulkhead upgrades as they are quite excy, the car will run fine with the plastics , but I can never run anything without all the bling . I’m just trying to find time in getting my shell done as I’m very time poor , hopefully I can get a running vid with the Z body in place . Best of luck with your D5 journey.

@jasonchant 5 ай бұрын

@@kelvinmrrc3289 all good man, thanks for the feedback 👍 I'm up to the shell too, also a Nissan (Silvia), using it as an excuse to challenge my limited painting skills 😆 Keep up the good work!

@manoloerbutanero66 7 ай бұрын

Hello ! First of all thank for this video! Its the only one I could found of the D5S clone , and with information! I bought the same kit last week but I had problems with gear ratio… I think the pitch does not match up like u said.. That being said, did you put a 48 pitch? Did you order it in aliexpress? In order to run a 10.5t? Thank you!!

@kelvinmrrc3289 6 ай бұрын

Any 48 pitch spur will fit , just use genuine 3 racing spur gears.

@PeterHewat 4 ай бұрын

Thanks for the review. I just ordered the exact same kit. Could you post links to the upgraded parts you replaced please ? It would help me out seting it up right when i receive it.

@PeterHewat 4 ай бұрын

Just read your comment about getting a genuine 3Racing 48 pitch spur gear. Ok but how many teeth ? I ordered a 10.5T motor just like you.

@PeterHewat 4 ай бұрын

And how many teeth on the pinon ? I see there are metal ones available on Aliexpress. Are they any good or should I stick to plastic?

@PeterHewat 4 ай бұрын

One last question... Is there a ratio on the belt drive ? Or is it 1:1 ?

@kelvinmrrc3289 4 ай бұрын

My guy hope this helps a.aliexpress.com/_mtRvDeY Keep your spur gears plastic nylon material just like proper 1/10 touring cars Go and buy pinion gears 48pitch from 9-15 tooth , and just test to see what best works for your motor as every motor is different , you’ll know if you are running efficiently by being able to place your fingers on the motor after your runs , if you can’t keep your finger on the motor for more than 5 seconds , then the motor is running too hot and is over geared. Don’t worry too much about the drive ratios as what matters is what your motor is doing. Have plenty of spur gears and pinions so you can find the sweet spot , if you have a motor dyno then you can fine tune timing to what’s best at 7amps.

@PeterHewat 4 ай бұрын

Thanks for the reply, I'll get a set of varying tooth pinions and spurs and see what works best for my setup. Cheers

@micuale5340 9 ай бұрын

How its drive ? Ive build The D5 MR V2 its all plastic but drives super nice with The Gyro set on 80% at 100 % I hâd wobble

@kelvinmrrc3289 8 ай бұрын

At first I thought gyro was ok but I did have to drop it by 10% , she’s now smooth as butter , I did look at the MR , but I like the rear weight bias of the RR.

@verabell138 6 ай бұрын

So how does it drive? In comparison to original plastic D5? And what about differential, which is not present?

@kelvinmrrc3289 6 ай бұрын

There is just more adjustability with the upgrade parts , a lot more refined than the plastic model & the locked diff is what is needed to drift . So it’s perfectly fine with the kit locked diff.