The old "MF'r" DOESN'T wanna DIG.... Let's FIX the Hydraulics!!! ~ Broke Down Backhoe ~ Part 2

  Рет қаралды 541,525

Salvage Workshop

Salvage Workshop

Күн бұрын

Пікірлер: 954
@dennisward1361
@dennisward1361 2 жыл бұрын
I told my son and wife that I loved watching your videos because of your patience and common sense . We have a half lab and weim , weim being dominant trait wise . You have 6 full weims , puts you in the patience of Job category . Can't imagine having to deal with 6 weim stares at once . God bless , enjoyed .
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
LOL... Oh i'm sure a half Weim /Lab has about as much energy as a full Weim!... But yeah, Weims aren't for everyone... 6 of them, yeah that's for a LOT less people, but they're an awesome breed and we enjoy them! Glad you enjoy the videos Dennis! Thanks for watching & commenting! I truly appreciate it!
@VStar1749
@VStar1749 Жыл бұрын
Well put together vid. As an Aussie, it never ceases to amaze me what a throw away society the US has become or maybe has always been! Gudonya for resurrecting this machine that seems to have been abandoned with so little wrong with it, and paying only $600 for this machine and a FWD to boot is simply amazing, you'd have to pay that amount just for a tyre in this country. Yes its not exactly new, but it still has a great deal of a working life left.
@thomascornelius510
@thomascornelius510 2 жыл бұрын
I work for a guy in Connecticut who fixed older rigs like that. I would paint them when they were all ready to go. I so enjoyed that kind of work. I painted for 37 years. Another great job brother. God bless.
@bensymington5550
@bensymington5550 2 жыл бұрын
It’s nice you are all working to work and machine now
@croftlife4119
@croftlife4119 2 жыл бұрын
It is partly due to your videos that I was confident enough to buy a Massey Ferguson 50HX S Series 1998. Imagine how happy I was when I saw that you had bought one too. Good news. I build walls (dry stack, as you guys call them) and have a small farm on the Isle of Skye in the Scottish Highlands. A place where resources are limited and you need to fix things with what you've got. Really looking forward to joining you on this repair project. Keep 'em coming.
@robinadair152
@robinadair152 Жыл бұрын
So glad I found your site,a true afro engineer. Did this for years with my own stuff,70 years old and on the downhill slope. Never give up never give in. Just keep doing it.
@donaldshulman6771
@donaldshulman6771 2 жыл бұрын
I am always amazed at how you take a machine that was left for dead and you bring it back to life !! BTW happy to see the dogs again.
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Thanks Don! It all starts with not being afraid to fail and just giving it a shot! I mean, it was junk when I found it, how much worse could it get?
@pamancave1150
@pamancave1150 2 жыл бұрын
What u do to get those broken bolts out is okay a slightly smaller but over it and weld that to the broken shaft of the bone you get it heated and something to put a wrench on it socket.
@pamancave1150
@pamancave1150 2 жыл бұрын
Oh and man those wrachet wrenches are the cats nuts ! I wished they'd have had em decades ago
@rlewis1946
@rlewis1946 2 жыл бұрын
@@SalvageWorkshop I love and respect you work attitude and ethic and am addicted to your videos! Really enjoy watching them. Best wishes, good luck and good health. Roy Lewis Buffalo, NY
@josephdougherty2399
@josephdougherty2399 2 жыл бұрын
@@SalvageWorkshop I went through a stage in my late 20s early 30s when I could buy old John Deere A's B's etc from the 30s-50s even had an oddball Model CC ...had a few other odds and ends, Ford 8-9Ns Farmall's and a an old Minneapolis Moline. I could just about buy them for scrap price as they didn't have much collectors value yet. Often they would be seized ....so they got put on a trailer with the binders a bit loose... cylinders filled with Diesel and dropped in gear ... By the time you drove 100 miles the rocking motion on the trailer would free them up nice and gentle
@TheDutchPathFinder1
@TheDutchPathFinder1 2 жыл бұрын
As the late George Peppard used to say: I love it when a plan comes togheter.
@nicopaletta9853
@nicopaletta9853 2 жыл бұрын
Love your content. Other channels spend 3/4 of their videos talking not doing nor showing the work. You get right into it. Love it.
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Thank you Nico!! Yeah, you'll NEVER see that kind of content on this channel! I understand WHY you click on the video, and it's not to listen to me talk most of the time or show all the unrelated things that are happening in my life... You clicked to watch something HAPPEN! Thanks for watching & commenting! I truly appreciate it!
@nicopaletta9853
@nicopaletta9853 2 жыл бұрын
@@SalvageWorkshop You're very welcome! What's going on with the TraxCavator? Cant wait to see an update on it. Happy Sunday 😊
@bigmotter001
@bigmotter001 Жыл бұрын
You now are my number one KZbin content provider. It used to be Andrew Camarata but he has sort of moved on to other things. Thanks for all you are doing for your subs and take care!
@WIDESIDE72
@WIDESIDE72 2 жыл бұрын
Dad was a pipeline welder. I can “mud dob” stuff together but learned a lot from him. Things like the reason behind the attempted fix didn’t work. It was because they tried to weld to cast iron. Seriously though, you need some left hand drill bits. About 75% of the time I use them, the bit catches on the broken bolt and screws it’s self out!
@jamesgibson5876
@jamesgibson5876 2 жыл бұрын
Broken drill it's work also .. just run the drill the same way a wine bottle cap comes off
@johnorchard9164
@johnorchard9164 2 жыл бұрын
I can feel your sheer joy have been down that road many times in the past. Happy days
@mdouglaswray
@mdouglaswray 2 жыл бұрын
Damn! Good job getting hydraulic power going again! Now it's just maintenance!
@tt600pch
@tt600pch 2 жыл бұрын
Old machines that need some love are well worth the work. I picked up an old Massey Ferguson a couple years ago that was a ''project" The old guy that had it broke the front axle at the pivot (2 wheel drive), blew the pump case trying to use a valve with no relief, fixed charging system and " many other items. A couple months work and I helped my son dig a pad for his new shop with it. Just bought an old Case skidsteer that I repaired the drive sprocket, replaced the fan, fixed the park brake, charging system and etc. Plowed snow today with it. Old machines with no computers are still running as they can be pretty bulletproof. I can never get "free" machines but the cheap ones serve me well with some love.
@petercolquhoun2086
@petercolquhoun2086 2 жыл бұрын
Happy dogs always make the best outros.
@alex4alexn
@alex4alexn 2 жыл бұрын
hundreds of broken bolt extraction vids i have watched and never seen the torx bit trick. That is amazing and will use that the rest of my life, cheers!
@scottrowlings5345
@scottrowlings5345 2 жыл бұрын
I’ll never rebuild a machine (or own) like the ones you’ve been working on lately, but I love watching you work your way through each machine, problem solving as you go. Thanks for the great videos!
@williamlavery9302
@williamlavery9302 2 жыл бұрын
Great job from billybeef Dundee Scotland UK Keep the good videos and God luck doing all the big jobs, great dogs too
@waynetrain8033
@waynetrain8033 2 жыл бұрын
Some open heart surgery on getting those broken pulley bolts out. Your determination to get these jobs done , is why I like watching your videos! Great job 👊👊
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Yeah it's ALWAYS a chore! Thanks Wayne! I appreciate that!
@vaidasmeskuokuotis3696
@vaidasmeskuokuotis3696 2 жыл бұрын
@@SalvageWorkshop YEP
@djhscorp
@djhscorp 2 жыл бұрын
Another first class video. Thanks for sharing.
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Thanks for watching!
@markb1487
@markb1487 2 жыл бұрын
Great video,,great content. We've owned our little MF industrial for 22 years..Never,ever had any problems with it...No ram seals gone,,no starting issues(even in winter)) These are great little tractors..🚜🚜🚜🚜🚜
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Awesome! I hope this one will be that way with a little more work and some upgrades!
@johnoldonekanole602
@johnoldonekanole602 2 жыл бұрын
I once had a mechanic tell me "anything can be fixed" "but is it worth it " . I always found the worth in fixing things was the satisfaction in knowing I could do it . Money wise it may not have always been a good choice . Thanks for sharing . You really are amazing . I think you left out all the cuss words and busted knuckles and difficulties you encountered . All in All great vid .
@marklowe330
@marklowe330 2 жыл бұрын
As a machinist most everything can be fixed but not always cost effective. And I too get satisfaction repairing thing other don't think is worth it.
@vwreid
@vwreid 2 жыл бұрын
You love what you do! A pleasure to journey through the discovery, the start again process for the first time, the fixer-upper and rebuild with you. Thanks for allowing us to spend time with you. Blessings for every new day.
@buffsheeri
@buffsheeri 2 жыл бұрын
Congratulations on your skills in repairs to this old machine.
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Thank you very much!
@geoffhayes905
@geoffhayes905 2 жыл бұрын
I love the old iron. What's the update on old red. Anything new
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
More Old Red content coming soon!
@delwhylie4748
@delwhylie4748 2 жыл бұрын
Your determination is remarkable. Once all the bugs are out you should have a pretty good machine. A paint job would tripple the value and make it more pleasing to the eye. Watching you man handle that wheel made me cringe; I live with chronic back pain every day from doing the same stupid shit. The best clinic in this USA said; they could go in from my chest fuse 3 vertebrae add some rods, screws and pins possibly 3 surgery's 2 years in recovery. May not relieve the pain but; would definitly improve my posture. Im 68 years old decided to pass. I was just like you and many others thinking I was invincible. Can only say I would be way more careful if I could start over.
@bensutherland6871
@bensutherland6871 2 жыл бұрын
Your a great mechanic love the videos this reminds me of working with my grandfather when I was a kid he would buy everything from motorcycles to heavy equipment that didn't work he would repair it and then sell it back to the same people half of the time lol
@PAINFOOL13
@PAINFOOL13 2 жыл бұрын
Thanks for the great vid on my Sunday 👍🏻 So appreciate the time n work you put into your old iron n videos .
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Thanks for watching!
@jrogertrudel6356
@jrogertrudel6356 2 жыл бұрын
Love the work you do. I have to say, you do have a lot more patience then I have. Hope to see "Old Red" in full operation again soon
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Thanks for watching! More Old Red content coming soon!
@OldSkoolF
@OldSkoolF 2 жыл бұрын
That is a NICE Tractor!!! Funny how those little fixes make a Machine so much nicer. Love it man...
@ronnygraves6380
@ronnygraves6380 2 жыл бұрын
Great job, man! I celebrate with you every time you convince one of those old machines to come to life. Wish I had a fraction of your mechanical aptitude
@GaryDavis-ir6fh
@GaryDavis-ir6fh Жыл бұрын
the wonders you do with all the old things you find is simply amazing!
@Ktgsvtrdg66
@Ktgsvtrdg66 2 жыл бұрын
You're doing great! I like the camera angles and you do a great job of walking us through the process of taking old equipment apart!
@terryrogers1025
@terryrogers1025 Жыл бұрын
Excellent job on the hydraulic system repair, like it much. Thanks for the tag along video, appreciate your time in recording and posting it.
@justusbar7597
@justusbar7597 2 жыл бұрын
Is Old Red ever going to be finished or is it going to be one of the projects never to be finished? Great job fixing the backhoe!
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
We'll get back to "Old Red" soon!
@justusbar7597
@justusbar7597 2 жыл бұрын
@@SalvageWorkshop Great News!!
@TXP2P69
@TXP2P69 2 жыл бұрын
Agreed. Old Red brought me to this channel and its sad and somewhat disappointing that it was never finished. Right up there with Diesel Creek and Cristine.
@jakealter5504
@jakealter5504 2 жыл бұрын
@@SalvageWorkshop I bet old red needs a lot of TLC
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
@@jakealter5504 You have NO idea!
@oddtechman
@oddtechman 2 жыл бұрын
Thanks for a follow up video on this old 50HX :) See you on the next one
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Thanks for watching!
@julias-shed
@julias-shed 2 жыл бұрын
The hollow bolts fitted to the gauge are called banjo bolts in the UK. Good to see some progress on this old iron 😀
@homeFall1
@homeFall1 2 жыл бұрын
also banjo bolts in the USA
@bjarnevarme9830
@bjarnevarme9830 2 жыл бұрын
Yes! It’s Gehl time. I’ve been waiting!
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
COMING SOON to a screen near you!
@RSterkenburg
@RSterkenburg 2 жыл бұрын
Please never put your bare hand near pressurized leaking hydraulics! A pinhole too small to see can shoot fluid right through your skin and it often leads to amputation. You always act pretty safety conscious, keep it up!
@breikowski
@breikowski 2 жыл бұрын
Low risk on this machine. There ain’t been pressure in those lines since Jesus was a kid. Looked like there was more water than fluid in it, by the looks of the milk that came out.
@heathhunter5306
@heathhunter5306 2 жыл бұрын
Implement weight does put pressure on the system, and valves can bypass pressure into the lines, especially on old neglected machines like this. Notice how the swing cylinder started leaking without being actuated? This would be one of those situations of unexpected pressure.
@grahamstretch6863
@grahamstretch6863 2 жыл бұрын
@@breikowski Hydraulic oil, water, milky oil or cows milk coming out of a hole potentially at 2,500 psi can cut you, always treat hydraulics as “they ARE at max pressure” and you will keep all your digits and potentially your life too, an oil embolism can kill!
@simongriggs4351
@simongriggs4351 2 жыл бұрын
Thanks I really thought this was a no go good to see you with your dog's that love the snow
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Glad you enjoyed it
@kennethcross5572
@kennethcross5572 2 жыл бұрын
Very interesting video
@anthonysimonhough9691
@anthonysimonhough9691 2 жыл бұрын
Amazing you just repair the unrepairable you really emboldened me to take a chance and just methodically have a go and repair stuff. Thanks
@haemhorrhoidian
@haemhorrhoidian 2 жыл бұрын
Awesome considering you thought your $600 would never run again,top work fella!! 🙂
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
I TOTALLY Agree!
@kerryevans7413
@kerryevans7413 2 жыл бұрын
I'm glad that you got the hydraulic pump repaired on the backhoe. Just a little more repair work and and it will be a great tractor
@stevewise9746
@stevewise9746 2 жыл бұрын
Well you had the pump off you should’ve changed the belt you’re gonna have to take it all off again if the belt snaps Great video.
@publicclammer
@publicclammer 2 жыл бұрын
I enjoy and appreciate your channel tremendously - and get real kick outta the dogs! Back when I was a kid in Arkansas, (around '55) I would sometimes borrow a neighbors two weimaraners to go bird hunting and they were such fun and great companions! One loved to hide by getting behind a tree and shifting around so I couldn't see him - ah, those were the days! Started working as a mechanics helper when I was 13 and was a full fledged mechanic by the time I graduated high school and still worked summers at the GMC dealership while in Engineering School. Folks like you, Wes, Matt at Diesel creek and a fair few others make me hopeful for the future! Thank you!
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Very cool! Thank you for watching and commenting! I appreciate your support!
@The_HillPeople
@The_HillPeople 2 жыл бұрын
My concern before the holes didnt line up, was whether the swapped pulley would line up with the other pulleys correctly. Looked to me like it was offset forward by the thickness of that lip on the front.
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Well we didn't have to get that far, but I think that they would have been swap-able! At this point it doesn't matter! I do appreciate the thoughts my friend! Thanks for watching!
@jeroen1836
@jeroen1836 2 жыл бұрын
I can’t wait 😅. Let’s continue 👍
@mrpetit2
@mrpetit2 2 жыл бұрын
Paint it! (and make a video about it obviously!) You're going to put so much work in it restoring all the cylinders; painting it will make it look so nice and add value corresponding with your hydraulic work👍
@garymucher4082
@garymucher4082 2 жыл бұрын
I'm glad you did the right thing repairing the front pulley and repairing the broken off bolts. That is how I would have done it as well. Than it is like it was supposed to be and makes it easier to repair down the road as well. Thumbs Up. Oh, like the dogs as well...
@tonyc.4528
@tonyc.4528 2 жыл бұрын
Very nice video, as usual! That's the first tractor I've seen that has a lever for diff lock rather than a left foot heel pedal to engage it.
@wpchastain
@wpchastain 2 жыл бұрын
Takes me back to my childhood watching my grandfather work on machines. My job was to pull the palmetto roots out of the tracks on the bulldozer.
@bohhica1
@bohhica1 2 жыл бұрын
Don’t want to be assigned the job of removing and installing the front fan belt. Anyway, love it, love it, love this kind of work, I have 5-7 favorite videos I watch as often as I can. Your video is right in the mix with the others, keep them coming and stay safe and healthy y’all !👍👍👍🇺🇸🇺🇸
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Thank you Loyd! I appreciate the compliment, and I'm glad you enjoy the channel! Lot's more to come!
@stanwooddave9758
@stanwooddave9758 2 жыл бұрын
A simple fan belt replacement with a "Link-Belt," cures that problem. Think of a "Link-Belt," like a kid's bike chain, just made with the same material as a fan belt. Instead of one master-link, a "Link-Belt," is nothing but a series of "Master-Link's."
@pacificcoastpiper3949
@pacificcoastpiper3949 2 жыл бұрын
@@SalvageWorkshop the hydraulic level check is called a sight glass
@pacificcoastpiper3949
@pacificcoastpiper3949 2 жыл бұрын
@@SalvageWorkshop my parents had a whiny heimer, that’s what we called him anyway, his name was go-more piles aka Gomer Pyle
@davidbarnes706
@davidbarnes706 Жыл бұрын
Fantastic video
@stephaneracicot791
@stephaneracicot791 2 жыл бұрын
please dont stand between the rear boom and try the swing like that a contractor i knew was doing maintenance just like that and he just triped and held on to the exac control arm for the swing arm his wife found him crushed to death with the machine idling be safe good video keep em coming good to see your videos are back
@tacticalrabbit308
@tacticalrabbit308 2 жыл бұрын
There should be thick rubber pads on the stabilizer arm end plates or the outrigger plates so that you can use it on concrete or blacktop .
@sharpeidad1055
@sharpeidad1055 2 жыл бұрын
Looking forward to another video of this machine. Good job Matt
@1885dr
@1885dr 2 жыл бұрын
what happened to the dozer?
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
You'll see that soon!
@sydneymcconnaughhay5947
@sydneymcconnaughhay5947 2 жыл бұрын
I'm truly grateful for your vids. I'm very glad to see them pop up.Blessings from Florida.
@idv1328
@idv1328 2 жыл бұрын
You got this!
@johncoleman8793
@johncoleman8793 2 жыл бұрын
That was so good I could watch it twice.
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Please do! lol Thanks for watching!
@heathhunter5306
@heathhunter5306 2 жыл бұрын
Just repack the cylinders yourself. It's actually pretty easy, and a lot cheaper. From what I've seen, they appear to be in pretty good shape still.
@roderickmacgregor4867
@roderickmacgregor4867 2 жыл бұрын
Thourghly enjoy anything you put out always amazed by your resourcefulness and excitement when something works i also appreciate when you show when things go wrong too not many do …
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Thank you!
@dreadrechsler8278
@dreadrechsler8278 2 жыл бұрын
Like your determination...most guys would drop it at the first hint of a problem. Speaking of problems: are there any updates on Old Red? I saw it sitting in the background in the video. Makes me think you took the head off and found something you couldn't quite deal with.
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
I'm not most guys! No Old Red isn't dead! Sometimes life happens and other projects come up! I'll be getting back to that project soon! Thanks for watching my friend! I truly appreciate it!
@denisewebb
@denisewebb 2 жыл бұрын
Great video, thank you for recording. Looking forward to the hydraulic cylinder repair!
@rudysaldivar4228
@rudysaldivar4228 2 жыл бұрын
Nice job! I would have definitely addressed the growly bearing when the radiator was off. Maybe even the fan belt.
@JerryWick
@JerryWick 2 жыл бұрын
I Agreer Rudy. That's qlot of work to get to the thing. Only would make sense
@Thedar561
@Thedar561 2 жыл бұрын
@@JerryWick of course it would make sense when you’re sitting in your bed commenting on someone else’s hard work
@JerryWick
@JerryWick 2 жыл бұрын
@@Thedar561 yep, you're correct. Funny thing that I actually was sitting in bed after pulling another 10-hour day working on heavy equipment at my job when I originally viewed this video. LOL
@billhopkins1553
@billhopkins1553 2 жыл бұрын
You have quite the ability, a joy watching you work-plus good job w/video!!
@andrewallen9993
@andrewallen9993 2 жыл бұрын
And now that you have locktited the four bolts you will have to remove the hydraulic pump to change the fan belt!
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
I'd rather that than have them back out and break again... A little heat while using an impact will make it easy to remove those bolts!
@andrewallen9993
@andrewallen9993 2 жыл бұрын
@@SalvageWorkshop As long as you can get in with an impact spanner 😀
@OliverLee390
@OliverLee390 2 жыл бұрын
Most old MF diggers just have an old link up belt to save that problem
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
I wondered about using one of those link belts... I'm not really too worried about it right now, the belt looked like it was replaced not too long ago... probably when they bird poop welded that plate to the crank pulley... as with everything, if it fails I'll deal with it then!
@nodak81
@nodak81 2 жыл бұрын
Can't wait to see more! I love seeing old beasts gone through top to bottom and put back to work.
@ChrisR1270
@ChrisR1270 2 жыл бұрын
Should the drive train, engine and hydraulic pump need replacement or repair, are parts still available?
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Good question! Not totally sure on the drive train or pump, but parts are DEFINITELY available for the engine! Let's just hope I don't need parts for the other areas! lol!
@dennism644
@dennism644 2 жыл бұрын
Wow overwhelmed that you have this skill I'm gonna call you the diesel machine whisperer..... My grandfather did this for the history side of things go find tractors that were just left for whatever reason but are now iconic machines that built america...the last one he was to finish was a cockshutt almond in color with red suspension total restoration.1955 I believe was the yr not sure of its number size.twin pedestal wheels up front.we got it done the same yrs he past and submitted it to the Smithsonian of agtacuture machinery (machines that change the way of farming.). Love all your video the only way your gonna know how it comes apart and how it was made is to do it yourself and find out.Grandpas famous words.fan subscriber for life.
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Diesel Machine Whisperer! I like it! Thanks for sharing about your grandfather, and for watching and commenting!
@michaelkingrey9995
@michaelkingrey9995 2 жыл бұрын
I'd tell all the armchair mechanics to pound sand . Love the content and the video's keep on keeping on . Do what you do best rescue lost and abandon iron !
@curtgarcia7386
@curtgarcia7386 2 жыл бұрын
Thank goodness for virgin holes. Thanks for the vid!
@ctiley2212
@ctiley2212 2 жыл бұрын
An easier way of cleaning the oil sight glass, without disturbing things that, if not leaking, are better left undisturbed is to use a fine metal polish like Purple or a fine vehicle cutting compound.
@bradleyhawk3717
@bradleyhawk3717 2 жыл бұрын
The torx bit extractor method is something I’ve never seen before. Genius.
@billrees4638
@billrees4638 2 жыл бұрын
I'm surprised that you have not collected some machine tools ie, a mill and lathe. I would imagine that they would be a great help in your endeavors.
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
I have an entire machine shop within Salvage Workshop! Very soon, I'll be doing a walk around of the shop, show how much the shop has changed recently, as well as all of my SHOP machines & what they each need to be ready to use! Stay tuned, it should be fun!
@keithdixon3913
@keithdixon3913 2 жыл бұрын
I worked in the construction industry many years ago and was involved with the machines the plant thanks for the memory
@TestECull
@TestECull 2 жыл бұрын
9:28 At this point I would remove the pulley, plot four new bolt holes halfway between the existing ones, drill, tap, grind off the booger welds from the pulley and the adapter plate, reassemble.
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
I can see why you might wan to do that right away, but In my opinion, that's a lot more work than just removing the broken bolts and cleaning up the welding... not to mention that by doing that, there's always a chance it's not perfectly centered on the pulley, which COULD cause all kind of other issues with the hydraulic pump and crankshaft... If i COULDN'T remove the bolts or the threads were completely gone, THEN I would drill new holes! from my experience, the most basic solution is usually the best, but everyone has their way of doing things! Thanks for watching and I appreciate your thoughts!
@TestECull
@TestECull 2 жыл бұрын
@@SalvageWorkshop You have orders of magnitude better luck extracting broken bolts than I ever have. I tend to just avoid doing it whenever possible because inevitably I'll break something off in the broken bolt or dicker the hole or something like that and end up having to drill new ones anyway. You're right in that it wouldn't be the easiest thing to get the new holes centered properly, but at least for me with my history/luck in extracting broken hardware, it'd have been the easier path, and I have the requisite tools to measure everything out properly soo... Looks like that shoulder machined into the pulley would have centered the drive plate and allowed its use as a template which would have greatly eased the process. Those stubs came out suuuuuuuper easy. When I saw how rusty that pulley was I expected them to have become one with the parent metal.
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Well with all the practice removing broken bolts from Old Red and about EVERY other machine I've ever owned, I've gotten pretty good at it, but I don't win em all! I also have the tools to accurately drill new holes if I need to, I mean I have a full machine shop within the workshop! Either way, we all have our ways!
@Jeekinz
@Jeekinz 2 жыл бұрын
Thats what I would have done, even before picking at the other machine.
@martymorse2
@martymorse2 2 жыл бұрын
Great to see your wearing quality work shoes. It is rare these days to seeing someone who is careful. Makes me cringe seeing people attempting to work with heavy equipment wearing tennis shoes. Be safe. It will save you from a lot of foot problems in the future.
@toolman1354
@toolman1354 2 жыл бұрын
great job getting it running but never check hydraulic for leaks with your hands wont end well use card board or something but not your hands
@michaelboyle1983
@michaelboyle1983 2 жыл бұрын
What are your reasons for not using your hands? Thanks. God bless you! Jesus answered and said unto him, Verily, verily, I say unto thee, Except a man be born again, he cannot see the kingdom of God. John 3:3 KJV Moreover, brethren, I declare unto you the gospel which I preached unto you, which also ye have received, and wherein ye stand; By which also ye are saved, if ye keep in memory what I preached unto you, unless ye have believed in vain. For I delivered unto you first of all that which I also received, how that Christ died for our sins according to the scriptures; And that he was buried, and that he rose again the third day according to the scriptures: 1 Corinthians 15:1‭-‬4 KJV For all have sinned, and come short of the glory of God; Being justified freely by his grace through the redemption that is in Christ Jesus: Whom God hath set forth to be a propitiation through faith in his blood, to declare his righteousness for the remission of sins that are past, through the forbearance of God; To declare, I say, at this time his righteousness: that he might be just, and the justifier of him which believeth in Jesus. Romans 3:23‭-‬26 KJV But God commendeth his love toward us, in that, while we were yet sinners, Christ died for us. Much more then, being now justified by his blood, we shall be saved from wrath through him. For if, when we were enemies, we were reconciled to God by the death of his Son, much more, being reconciled, we shall be saved by his life. And not only so, but we also joy in God through our Lord Jesus Christ, by whom we have now received the atonement. Romans 5:8‭-‬11 KJV For by grace are ye saved through faith; and that not of yourselves: it is the gift of God: Not of works, lest any man should boast. Ephesians 2:8‭-‬9 KJV Therefore being justified by faith, we have peace with God through our Lord Jesus Christ: By whom also we have access by faith into this grace wherein we stand, and rejoice in hope of the glory of God. Romans 5:1‭-‬2 KJV That if thou shalt confess with thy mouth the Lord Jesus, and shalt believe in thine heart that God hath raised him from the dead, thou shalt be saved. For with the heart man believeth unto righteousness; and with the mouth confession is made unto salvation. Romans 10:9‭-‬10 KJV
@toolman1354
@toolman1354 2 жыл бұрын
@@michaelboyle1983 hydraulic oil can get injected in skin then need surgery to remove
@billyelkins441
@billyelkins441 2 жыл бұрын
Its a real pleasure watching you work.Your obviously no quitter.I'm a perfectionist and hate working on my own stuff.Oh I can do the work I just get wrapped around the axle all too easily.I admire your attitude.You would make a fantastic shop teacher.
@HS-ru8ip
@HS-ru8ip 2 жыл бұрын
Whats about old Red ?
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
More Old Red content coming soon!
@globalsurfer
@globalsurfer 2 жыл бұрын
Amazing work ethic and recovery.... you have a new subscriber.... from Durban, South Africa.... lovely videos....
@bj0rnn0rgaard1996
@bj0rnn0rgaard1996 2 жыл бұрын
Would it not have been easier to mark out and drill 4 new holes?
@bow-tiedengineer4453
@bow-tiedengineer4453 2 жыл бұрын
Or drilled out the holes one size bigger, allowing for larger bolts less likely to break off the same way.
@parallaxbill2276
@parallaxbill2276 2 жыл бұрын
That's what I thought too.
@andrewallen9993
@andrewallen9993 2 жыл бұрын
@@bow-tiedengineer4453 And then helicoiled the holes?
@CwazyWabbits
@CwazyWabbits 2 жыл бұрын
@@bow-tiedengineer4453 That might have meant sourcing new rubber bushes that would take the larger bolts.
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Why change what is factory if we don't have to... it wasn't that difficult to remove the broken bolts and cleanup the pulley... only thing I DID change was adding stronger & longer bolts to make more contact with the crankshaft pulley making the bond between them stronger. If I COULDN'T remove the bolts or the threads were completely gone, THEN I would drill new holes! From my experience, the most basic solution is usually the best, but everyone has their way of doing things! Thanks for watching & leaving your thoughts, I truly appreciate it!
@phillipdickinson8557
@phillipdickinson8557 2 жыл бұрын
Great job as always hydro rebuild and it well be fantastic can't beat the price it is super and help in a lot of work real great thank you for sharing and your time as always never miss one and can't wait for next.
@leonanderson4727
@leonanderson4727 2 жыл бұрын
An afterthought, "Now that wasn't as hard as we thought."
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Many times, it never is!
@alex4alexn
@alex4alexn 2 жыл бұрын
also, something super satisfying to watch a cylinder be rebuilt....if you take on the job, would love to see it
@countrygentleman4084
@countrygentleman4084 2 жыл бұрын
Massey Ferguson are very reasonable to fix
@GrandsonofKong
@GrandsonofKong 2 жыл бұрын
Love seeing Old Iron brought back to life from "rust". Keep'em coming!! Thanks for the puppy footage too!
@ldr9146
@ldr9146 2 жыл бұрын
replace the front crankshaft seals on both engines.
@demonlordgradim
@demonlordgradim 2 жыл бұрын
I ran one like it in early 70s on a pipe line ran it 10hours a day 5 days a week for four years an ever Saturday I got five for the work on tractor change oil 4 weeks an filter in between grease an oil an fuel filters tires hole.s pins break .the worst thing I found on the one I ran was keep ever thing tight it was bad about the bolts I had to replace the grapevine with grade eight .thanks for all the work you did an you make a good Vedic explaining the job thanks paul
@roberthoneycutt1639
@roberthoneycutt1639 2 жыл бұрын
You can do more with little than just about anybody I have ever seen.
@davidworsley7969
@davidworsley7969 2 жыл бұрын
"She said" !!!!
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
My wife never actually said that! Sorry!
@billyhaddock5540
@billyhaddock5540 2 жыл бұрын
great to see the old backhoe working again. hydraulics seals are a pain, butt worth the work to have her working better.. lv the dogs..
@uncle_moose
@uncle_moose 2 жыл бұрын
Where is old red?
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
More Old Red content coming soon!
@rons4778
@rons4778 2 жыл бұрын
Over the years working on forklifts front loader garbage trucks I learnt to always put a spare fan ,belts and tie them out of the way as it’s a pain to have remove everything to fit one and buy yourself a set of left hand drill bits it’s amazing how many bolts come out when drilling
@0796logsplitter
@0796logsplitter 2 жыл бұрын
Should it not have a rubber or flexible coupling between the crank and pump drive shaft?
@CwazyWabbits
@CwazyWabbits 2 жыл бұрын
The bolt holes in the coupling plate are rubber bushes.
@0796logsplitter
@0796logsplitter 2 жыл бұрын
@@CwazyWabbits ahh right, thank you 👍
@rhiantaylor3446
@rhiantaylor3446 2 жыл бұрын
Great progress for little outlay - excellent !
@whotknots
@whotknots 2 жыл бұрын
I see the witness mark from the oil seal on the pulley hub from the forklift looks nice and clean, whereas the one on the backhoe has worn a groove so there is potential for a leak there.
@davesanford4798
@davesanford4798 2 жыл бұрын
Could have used a speedy sleeve for sure
@michaelmoran6861
@michaelmoran6861 2 жыл бұрын
Thanks for sharing. Another great video. Michael (from Scotland)
@austinhughes1924
@austinhughes1924 2 жыл бұрын
I’d say fix all of the hydraulic lines.That way you don’t have to worry about that later.
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
I have a love hate relationship with hydraulic lines! I can't run my machines without them, but most of the old junk I buy needs MANY new lines! I would LOVE to replace ALL the lines on ALL of my machines, but the cost to do something like that is just CRAZY!! there are some that need replacement, but many are still just fine!
@reap104
@reap104 2 жыл бұрын
This might be a great opportunity to try and find a hydraulic fitting crimping tool to keep up on your old machines. I'd rebuild all the cylinders and be done with it on an industrial machine likes that. Also, at the least I'd grab some quad 0 steel wool and clean up those ram's so that any leftover oxidation or burrs don't work on the seals anymore
@SalvageWorkshop
@SalvageWorkshop 2 жыл бұрын
Oh I've been looking and would LOVE to find one for the shop! Hard part isn't the crimper... its the having all the hose sizes and hydraulic fittings on hand to make all the different hoses that each machine needs!
@cygnus1965
@cygnus1965 2 жыл бұрын
Left Handed drill bits are you best friend when trying to remove old Broken bolts.
"Идеальное" преступление
0:39
Кик Брейнс
Рет қаралды 1,4 МЛН
The Lost World: Living Room Edition
0:46
Daniel LaBelle
Рет қаралды 27 МЛН
Andro, ELMAN, TONI, MONA - Зари (Official Music Video)
2:50
RAAVA MUSIC
Рет қаралды 2 МЛН
Will the OLD Backhoe Start & Drive? (It might be SCRAP)
1:36:47
Salvage Workshop
Рет қаралды 165 М.
After sitting 30 years, Is this F250 Worth Saving??
1:24:10
Diesel Creek
Рет қаралды 457 М.
Destroyed Terramite T-2 backhoe repair Part 2 of 4
13:03
K1LBG - Joseph Heck
Рет қаралды 435
Dozer, Tractor, or Grader??? ~ Was this one even WORTH rescuing?
37:45
Salvage Workshop
Рет қаралды 159 М.
"Идеальное" преступление
0:39
Кик Брейнс
Рет қаралды 1,4 МЛН