Salvaging a DESTROYED Supercharged Corvette!

[@scraplifegarage]

Get 50% off your first order of Sundays: sundaysfordogs.com/scraplife or use code SCRAPLIFE at checkout!

[@i.really.like.cars.]

How's the Manual Demon coming along?

[@bradodom7980]

How long have you been Salvaging car parts I'm wanting to start and interested if it's even worth my time

[@royoprince879]

"How many burnt cars will you buy?" Him: "Yes."

[@LeeC]

Yes

[@jasonruch3529]

😂😂😂😂😂

[@mangotail6808]

,,How torn up is your Corvette engine,, Him: To the core

[@the_bald_eagle_machine6559]

Definitely should have been part of the Smoked series.

[@praneetprakash]

Paxton 1500SL can support upto 900 hp

[@techmaster777]

When I had my 1500sl it made 830 whp on stock unported ls3 heads and did a 4.2 60-130 and 3.7 100-150

[@p1mpjunior12]

Someone call the marketing department for alpine because this here is a great testament to the quality 😅

[@kickit59]

Wow I have seen a few engines that were really and truly blown up! However this Corvette engine is at the top of the heap for blown up! Impressive!

[@JasonMcCord-qk3yb]

As soon as I saw those bent pushrods, I thought “They only get THAT bent when something hits the valves”. There aren’t a lot of things that can hit the valves…. Yikes! That is one BLOWN UP motor!

[@brianz367]

Really enjoyed seeing the carnage on this one!

[@DOPES4MAGA]

Wow, I've seen you take on some stuff but this one might be even a challenge for you. That is a beautiful dog. I wish I had enough money, love, and room for all the dogs.

[@MrWigglesThe4th]

just found this channel and i have to say i love the way this guy things, need more people like this in the world.

[@joetelesto1907]

The 1500SL and V2/V3 TI on the 240 are the same exact blowers. Vortech makes them for Paxton They max out at about 850whp on a LS motah.

[@lukerutledge1357]

The previous owner sure felt it when he wrecked that car! I'm surprised you guys pulled out as much money as you did. A grenaded motor, crash, and fire? That's one bad day.

[@jasonmarks1636]

09:43 "that is way straigher than i thought it would be" I agree, straight is surprising on this channel.

[@bengone3349]

No one will forget this YELLOW Vette. You have put it in the spotlight for sure. I wonder what all the explosion sounded like. Beautiful dog, mans best friend for sure, including you Lee!

[@billhughes5081]

LS1 stock bottom end with that exact same ECS (Paxton) SC, 60lb injectors, fuel pump booster, catback and a 3.4 pulley = 500HP and 510FT Lbs and that's on a 02/A4 C5. You can push it up to 750 easily-

[@MapOfEurasia]

"There's malace in the combustion palace!" - Eric from "I Do Cars" I think a rod broke setting off a catastrophic domino effect with a piece of metal that went in the timing chain, throwing off timing and destroying the valves too. P.S: "I'm sure it happened at low RPMs at idle" - Eric from "I Do Cars"

[@juddsanders8764]

I also subscribe to the I Do Cars channel. After they showed the holes in the side of the block, I wondered if Eric was going to appear (as if this would have become a collaborative video). Eric comments often about not having very many details about the specific vehicles the engines he tears down came from.

[@anthonyperrucci7304]

Super professional Mr. Lee C! Guys all over E-Bay, Craigslist, Facebook Market selling Corvette "screws, nuts, bolts basic JUNK you can buy at Lowes or HD. As you said, "dead inventory". I wonder how the people in some of those wrecks survived after looking at those cars. One of your great strengths is your crew and your tenacity to stay focused.

[@CorentineContent]

Still waiting on yall to part out a jet stream blue c6 🤣🤣 I want the widebody. If yall ever get one in, just sell me the full kit lol

[@austinsaunders4426]

27:12 is a massive 🗣️ to live by

[@EazymoneyBicch]

Yup, that's what a "free" engine looks like

[@Brad-h5o]

You gotta love them LS,'S Lee

[@DavidKornrumpfII]

Think the driver said all the bald eagle & send it to heck , praise Dale

[@thaonlyjerm]

any update on the demon?

[@LeeC]

It's done, running, driving and dyno'd. Video will be out next week 😈

[@Rman1228]

​@@LeeCthis just made my night 😈 can't wait 🔥🔥🔥

[@thaonlyjerm]

@@LeeC just made my wednesday better, cant wait to hear that hemi😏😏

[@jeffreyshepherd8488]

Wrist pin always survives

[@tazanteflight8670]

IKR, why not make the entire engine out of wrist pin material!

[@drivewaymarvels311]

Great videos. Enjoy going into the auto salvage archeology with you!

[@waynek921]

Slg.... that was a great video and very informative about the way the engine died , I really enjoyed it and keep up with the great content.....

[@johnnycoleman2601]

Gamble more time on more videos! I need more content from you guys. Love all the stuff you guys do.

[@deansmith2545]

The highs and lows in this video. Epic😂

[@Dominator-mu1hx]

Normal price for working front grandsport brakes are minimum 800

[@1320420]

I'm a new follower Fernando and You are hilarious.

[@malikdigger4544]

The first 15 minutes is a what where u thinking moment @ Scraplife Garage till u realize he's making good profit on a half BBQ C6 Corvette GS Convertible

[@BurnoutPJ]

are we gunna get an update on the demon?

[@rajcam80]

That is some carnage!

[@InitialEngineers]

This is the “ it’s not that bad “ C6 🤣🤣🤣

[@LeeC]

Ok this one was actually that bad

[@600zxr]

Daaaaang bro, I went to buy them calipers but they're posted for double what you said in the video. Lol

[@SuEnRoD]

I think the timing chain breaking started the whole thing. That's the reason so many valves are bent.

[@weaverhchrist]

That motah was definitely over revved which floated the valves which kissed (hammered) the piston(s)

[@chasepelley6261]

Your dodge demon is sick! good job Lee!❤❤❤

Looks fantastic. Nice job

[@mymanmiles393]

i love that your homie who clearly strays away from the camera intentionally still couldn't help defending his build with the centrical blower when you started doggin on him for laughs

[@unavailabill]

It’s his brother they are business partners they always give eachother shit it’s kinda funny.

[@petetofani4896]

I think with a little JB Weld you could fix that block.

[@diegogolfhotel]

Cant wait to watch this! love your videos.

[@vincentcarrano6329]

Another great vid Lee

[@terminater-ng3fs]

Great breakdown video💪

[@LeeC]

USE THIS AS THE "I'VE BLOWN SOMETHING UP WORSE" STORY THREAD...

[@Orbacron]

Mabie a block inspection and siezed crank spin would have determined purchase or no purchase

[@LeeC]

In an ideal world, absolutely, but when you're buying cars from all over the country, you only get to personally inspect a handful!

[@joebersani8068]

Another episode of smoked finally

[@alexvillalobos7137]

The salvage life you wind some and you lose some and a lot of time but that’s how it goes

[@brianweber6358]

That’s impressive

[@Motorsportsgeek]

my 2v Mustang Bullitt did 410whp with that blower and a 3.33 pulley, that ls3 must have been pushing its limits and made serious power

[@georgesmathers6056]

Cute pup

[@zackbechtol2010]

Lookin at max 1100hp with that setup blower max, but I doubt that car was near that with what parts I saw

[@rocsolid4112]

Did Tim just try to give you Tree Fiddy.....Hes that got damn Loch Ness Monster....

[@Bloodshot_camaroZ28]

Dang at this point in time the wiring harnesses in all them cars that you gave to the scrap yard for free would have came in handy for selling it for copper scrap but what do I know 😂😂😂😂😂😂

[@bobbydwheelhouse]

Did we work out what that green oxide was?

[@gunnywill20]

Another great video man! 🛠

[@wilfredocaban3542]

Hope the driver made it out I hope the motor good.

[@adam96blackss]

I'm betting the timing chain dampner failed and broke the chain. That style damper is a no go when upping the power on LS. Why everyone switches to the ls2 block dampener

[@jamesdamron2065]

Hey is that,,,SMOKED tint on that glass??😂😂😂😂 lmfao!!! Jeez

[@BurchellAtTheWharf]

Time to start selling paperweights and desk ordiments

[@interstateboss5921]

3:00 You apologizing makes me feel dumb for liking it 😂 Can't wait to see what that inner fender sells for. 15:56 Welp I guess that answers that 😂

[@leddygee1896]

Sometimes I think you guys pick these Burners on purpose!!😁Devastation of the highest order...

[@ky4encetv463]

Prolonged burnout on high rmp blew the engine and the car caught fire in my opinion

[@alexjackson936]

My guess was as soon as one of the pistons let go, everything met such high resistance that it jumped time causing even more collisions smashing everything to bits. Not very knowledgeable on ls motors though, so probably way off. Gotta love someone who had that much misplaced faith that a stock block would hold up to that much abuse.

[@karlos1060]

This engine was toasty like i have never seen! Already when the drainplug went out alarmbells went of with a littlebit of oil comming out. Now we know why.

[@stevenpresley433]

Lee. How much would you want for the main caps out of that destroyed engine

[@maniacaloffroad5338]

You guys make me wish I had friends.

[@lanegeisewite1436]

That poor C6😢

[@Backyard_Racing]

I think they Paxton is rated like 900-1000 depending on mods

[@gsc512]

Harbor freight has a hydraulic jack table for like a thousand pounds lifting capability for like a couple hundred bucks. Instead of laying on your back you could have it at waist height. The table has a hydraulic top so you can lift it up underneath the car so you can basically stand under there and get that done as opposed to laying on your back But you do have a welder so I'm sure you can figure out how to weld two of them together 😂 I'll give it a much wider platform so you can make sure nothing falls off

[@thompsonbutz5354]

i will take you on that fernando deal

[@down2earthparanormal145]

not bad minus the blaze

[@digiklemuzik544]

Lol - The pushrods 😂

[@northwestmountainbikeaddic6874]

The wrist pin on top of the piston 😮wtf? How?!

[@RipRoaringGarage]

That was one HOT car

[@alexelrod242]

He was floating valves, either with RPM or boost pressure, or both

[@Utubegofukurself]

Timing chain is the culprit

[@aldounplugged1]

do you have a website where I can buy some parts of the cars you have ?

[@pavel1809]

i m not sure if that is the z7 but corvette z7 engine head price about $2,000

[@iconoclast518]

green stuff under the manifold looks like DECON rodent killer

[@PlymouthVT]

I guess they don't come with rev limiters yikes what engine damage! Talk about grenading!! That was very exciting when it blew. Shitty oil oci too what an idiot. Great video!!

[@harleyfowler386]

Ok sooo nice cars but what is going on with the phoenix demon

[@jayharper2252]

My guess is the guys right shoe is still melted to the gas pedal and that's what caused the motor to explode causing the fire and accident . Lol 😮 That car was on fire before it stopped. Wow

[@finishstrong365]

I can only imagine the previous owner sobbing as he watches his car being dismantled lol.

[@Sim-c6]

I'll buy the passenger side inner fender?

[@Bret-xz5sv]

A 3.25 pulley makes around 10 psi,

[@DreMaes-j7e]

hey scraplife team i was just curious. I live in the Detroit area and was wondering if car salvaging is a consistent profit, or is it like stocks where you gain and loose money. my friend and i have been wanting to do this for a while and have been considering it. If we decide to do it., do you have any tips and tricks that yall can give us to get a good start on all of this? BTW... If you respond thank you so much.

[@Alwhite1929]

Damn, that engine damage is impressive.

[@Frossyt]

I mean it was worth buying just to see what the motor looked like 😂 Jesus man. I think you can fix it. 😂😂😂

[@wilfredocaban3542]

This guy build woke up and built a grenade 😂😂😂

[@SoloIzDA1]

This blown up engine takes the cake.

[@octaneandwrenches12]

Oh that thing spends perfect that's totally rebuildable.. as a new engine block after it gets melted down and recycled.😂

[@davidschannel6131]

I bet the time and chain let go at a very high RPM

[@nerdonthebike9713]

$60 for that blow off valve to deliver it to Washington! I believe in yall!

[@PasleyAviationPhotography]

You sure the "new" guy off the street isn't really the loch Ness monster?

[@volvowagon70]

I would love to see that 12,000 rpm he hit!

[@G_jrdnn]

What’s good bro, how’s the manual demon going?

[@pistolpete1101]

I am willing to bet!!! This motor had stock ring gap!!! Everyone that says ls motors can’t hold power… it’s because of ring gap!! When boosted, the heat created causes rings to expand past the “stock ring gap” and causes the piston to get stuck in the cylinder and… BOOM! If this person would have took the motor apart and made the ring gap larger, it would have handled 1000hp!! All day! Can’t win them all!!

[@Daniel_Smith_]

Make a glass table out of the block

[@WonderrTaco]

in the name of content!