Sam'sTrains is full of lies

Don't believe the male gossip lies from Sam'strains.
He"s very wrong about a lot of stuff.
He doesn't check his information before he speaks and doesn't hire an editor.
Don't believe the lies.

[@Gma7788]

STOP yourself before you comment. We are stopping the abuse at SAM'S level. You're not going to add abuse after his website. SAM STARTED THE ABUSE AND IT STOPS at his website. You don't get to do any antisocial behaviour here. You not get to add more horrible comments or judgements. YOU'RE TERRIBLE AT JUDGEMENTS AND YOU'RE NOT WELCOME TO POST ANY JUDGEMENTS ABOUT ANY TOPIC! You DON'T GO STRAIGHT INTO JUDGEMENTS. You're not hired as a judge. If you post any judgements, you go onto SAM'S 1st level attack website or your own website, and you post there. You're trespassing on my property and you're getting BANNED FOR LIFE. Sam started his attack. You're not allowed to start a 2nd attack. You didn't do anything! You have NO business here! You're not capable of starting a conversation. You FAILED to make a judgement. Without a conversation, you're not doing any judgements. If you click thumbs 👍 to more attacks, after sam's attacks on Hornby, then those comments are removed and permanent bans for life are imposed, if I decide it warranted more punishment. Your crazy views have been stopped ✋️ You LOST years ago. You should tell your doctor your problems you have with the internet before you get yourself on the authorities watch list. You've never been hired as a judge. You've no business here.

[@napsbrickrailways2290]

I mean this purely with caring intentions, but are you okay buddy? People are allowed to make their own judgements on things, we live in a society built on free speech. This is his personal review and the ratings are just his opinions. If you disagree with his reviews, that’s okay. It’s your opinion. But what isn’t great is being rude and sending hate to a creator for expressing their opinions. Hope you have a damn good day, buddy. - Dav Naps

[@stephendavies6949]

IMO Sam is the best loco reviewer on KZbin. I don't always agree with him, but his views are credible and informed. Also, he buys his own locos to review, so is entitled to give his opinion, good, bad or indifferent.

[@Gma7788]

Wrong! Handing over money is not the same level as making. Making is just the beginnings of something that eventually turns into factory production. It's the audience's turn for re-education. Off you go, you lunatic.

[@chuckmaddison2924]

The capacitors at the motor, the source of interference is normal. Putting them miles away on the board just doesn't work.

[@LocomotionMotion]

I'm sitting on the fence on this one, but I will say that I too do model railway item reviews and most of the time I haven't a clue at what I am looking at (lol!). I just like trains, and models of them, and give my honest opinion based on what I am seeing in front of me when I am recording. But, I'd be delighted if you were to roast one of my videos too because I'd love to learn how to get better at it. It is just a hobby for me though

[@Gma7788]

That's interesting. Sometimes we need some editing or push back so we can fine tune our lives before we pass away. My city and country is wasting lives and I see most of my life opportunities have mostly been squandered. Partly because of me and mostly because of other people in power. Simulations and connecting to the Internet are giving us a lot of knowledge very fast. You're doing multiple jobs these days, with less corrections. There had to be some kind of push back against the millions of unedited content flooding the world Internet library.

[@zagan1]

I get what you are meaning/saying. And even Sam has videos on this, he's doesn't have the model rail line, because he's not a huge model rail line person. He is though a collector of the model locomotive companies. And he's had others do these sorts of videos that he's watched and plenty of comments etc. And he's asked some people how many Bachmann model locomotives do they have and they might reply with 30! Which for the avg personb with the model rail line, would be a lot of locomotives. However he has around 600 Bachmann locomotives in his collection, all up after his last collection count video, he's around 6,000+ model locomotives. Though that's what happens when buying the models for 10+ years straight. If he buys a model locomotive and it doesn't work correctly or isn't made very well he isn't going to keep it around it or fix it up. As he has 100s and i think he's got over 1000 Hornby locomotives, to use whenever.

[@Gma7788]

Well you make a KZbin channel on this topic. Therefore a lot of source material for you to work with.

[@CrimLine]

Not going to lie, this is just pathetic enough to be entertaining.

[@Gma7788]

Yeah, it seems, on face value, that Sam's videos are entertaining, but they're not, so I agree with you. You'd think by now that everyone who wanted to watch this topic would have finished watching the video. But now we know the computers 🖥 are LYING TO US ALL by giving the videos to irrelevant consumers to watch. It's not possible that 68 people wanted to watch this old video, in the last 5 hours. Only robots will be interested in these fake results.

[@Gma7788]

In your puny mind, your £1 note whips the factory 🏭 into doing what you say. Thousands of strange men are whipped into action from your barking orders. Yeah, you're SICK 😫 🤒 YOU'RE REALLY SICK. Tell your doctor before posting and get permission to post. Your doctor should be buying trains too. I'm sure he's interested in what you have to say to us strangers across the world 🌎

[@jacqueso8424]

Generrally when some review a newly released model of any prototype locomotive its classes, it would be a reasonable assumption that the individual has a reasonable to very good to great knowledge and understanding of trains(actuals)and the models based on the actual locomotives and rolling stock. I, however are not sure if Sam the reviewer in this case in the video being reviewed, has the knowledge of the trains and related models. My point is, if you want to review newly released products in the hobby of trains, please make sure you do your homework as much as possible. Because some one will come across it and call you out as the gentleman analysing Sams video has done. The train hobby is already plagued with issues (building and selling) here in SA, not sure about UK and the States and other countries. If im not mistaken , the reviewer was called out on some one elses platform too at some stage. But we dont need reviews as we as train modellers are already familiar with actual prototype locos and rolling stock

[@Gma7788]

Oh, yes we'll done! Thanks for your great comments 👍 I got so sick of watching bad review after bad review and I just had to say something. These video makers must have some real world experience to be able to speak to the entire world 🌎 on these things. Listening to manufacturer attack after attack gets really boring really fast. Presenters used to tell some facts. I struggle to hear any facts, these days. Cheers!

[@jacqueso8424]

@@Gma7788 no problem. In SA where i am, a good few guys are attempting to salvage the hobby by producing models of reasonable quality to good and high quality to give the model train group here "workable" pieces. The High end models are produced using professionally molded parts and chassis' of models and really take their time to do a proper job of it, thus the customer pays the justified high end price knowing this fact and they enjoy the models and its function to hearts content. The flip side of this is where some individuals use modern tech like laser scanning, laser cutting, vaccume forming or other thermo plastics and resins to make these models assemble the articles. In fairness here too, some succeed to produce good quality at reasonable price, yet the remainder of the group, if any, just drags long, effort leaves much to be desired for, in the end we sit with models that will give Sam reason to vent frustration. There is 1 luxury train that may only be made by 1 individual authorised by owners of the chartered train to do it and sell it. No one else is allowed as the train is under copy right protection. So i bought a model from the 1st group mentioned, never looked back model, still great use from it

[@Gma7788]

Thanks for your great reply and comments. With hundreds of brands catering to the model train world, there should be no complaints 👌

[@user-ff9pc3fu7p]

Someone has some beef . I wanna see some of your reviews u seem to know wats up with engines

[@Gma7788]

I've moved on from these types of videos. Not enough subscribers to pay the bills 🙄 Almost no likes as well when compared with the number of viewers. No, Sam is the one with the beef against hornby, etc... If you watch one of his videos, you're better off to throw out the negative energy his videos create. Just reject his lies.

[@user-ff9pc3fu7p]

I would but there ain't much else on reviews so...I would but right now I hath not the trains nor the funds . One day I'll do em just unboxings n runnings no scoring tho I reckon @@Gma7788

[@kennethmaney914]

I wonder if he's sponsored, Sam giving a good review can add £££ to a locos price, check it out, Or lose pounds on a bad review. I've many of the trains Sam describes as rubbish that work perfectly well. Try DCC Sam. See the difference.

[@Gma7788]

Yeah, Sam does cause wrong price fluctuations. As long as people know Sam is wrong about most things, people can buy a great train or locomotive cheaply. But unfortunately, he does push up the price on some items, very quickly.

[@KennysChocolateMilk]

I've seen quite a bit of Sam's videos he is honest when it comes to his opinions.

[@musoseven8218]

An interesting POV - we are all entitled to our POV, of course. Sadly with the current level of PsyOp, especially since late 2019/early 2020, A.I etc, hidden business relationships, people serving more than one - hidden - master, shilling etc, plus tail wagging the dog advertisers (yes thats happening in the msm and our model railway magazines, even in some society magazines too), getting to the truth is nigh on impossible. If we are talking about people's livelihoods? Whilst Ive the upmost respect for the Chinese people (I've Chinese friends, whove escaped that regime, some of whom were at Tiananmen Square), perhaps both You Tubers are missing something? The majority of manufacturing in China overseen by the CCP, the CCP act like a protection racket. The CCP have a terrible human rights record AND are infiltrating huge swaths of western governments and manufacturing, plus our societies/culture in general. The art of war and war through commerce, thats MORE important than a 3 pole vs a 5 pole motor, is it not? 🇨🇳🇨🇳 Perhaps we should all consider whether its ethical or not to buy our models from the CCP?!!🤕🤔🤔💔 I've written papers and procedures (and had such accepted and implemented) on ethics in business (buying and selling), and I have to say these are VERY troubling times, with shareholder capitalism and worse, WEF, stakeholder capitalism ruling the roost via big business and their proxy puppets, our governments.💔🤕☹️ Hornby often loose their way - and Oxford arent as pure as the driven snow either. Bachmann et al were avoiding supporting warranties hiding behind sales by "unauthorised" dealers at toy and train fairs, knowing full well that they (Bachmann) were making profits from the grey market box/product shifters and shifting product (the punters not able to identify whom an authorised trader was with Bachmann refusing to state or list such - then if there was a warranty claim, said punter looses out). Dapol have their issues too re pricing, warranty issues and how they treat small suppliers - who last time I looked hadnt had a margin allowance increase for nearly 20 years (thats from the three or four main manufacturers). Thus small model shops make less margin than toy shops! So in the UK many have closed. And dont get me started about Heljan and their shenanigans - awful! I make these statements as an ex student of business and a retired businessman, with friends in the trade, and my knowing reps, magazine editors, manufacturers et al. When I wrote, carefully, but factually about these issues online, and in magazines (because of my concern for this wonderful hobby), some 6 or so years ago, I was "cancelled", now that practice is wide spread in public life, anyone dare mention the truth? They get shut down as "meh conspiracy theorists". It was the same with some skilled modellers, who were also excellent writers and engineers - all cancelled if they spoke out. None of us should blindly support the manufacturers until such times as they fully support us AND the smaller retailers. The manufacturers are not gods and they are NOT whiter than white 💔☹️🤕

[@Gma7788]

Oh yes, they ARE gods. No, other people are Not entitled to their opinions. Civilisation has GONE. It was replaced with MASSIVE population. A people swarm. People swarming, to be exact. It's basically CHAOS. In MASSIVE population, there's always someone that survives. There's always someone with a lunatic concept that survives. Lunatic concepts just keep on going on. You can't get rid of lunacy. When you ask around and get a well rounded opinion, you realise that's the planet.

[@Gma7788]

Manufacturers leave something behind after they've died. They improved life on a spinning planet. Gossip sinks ships. You allow all statements not judgements or Gossip, so you can research stuff for survival on planet earth so you don't get damage to yourself cause you ARE surviving on a planet with no explanation or instructions. You ARE surviving and you approach life from that perspective.

[@Gma7788]

The truth is, you're surviving on a spinning planet. Magazines are people trying to survive on a spinning planet 🙄

[@thewatcher7682]

I thank you for your video sir, in our industry Sam's trains is an equivalent of a journalist and has a large audience but still needs to be scrutinised for errors or biases. Sam does often knock modern mechanisms for being simple, simple mechanisms can be good for the model, with fewer parts to replace / lose and a low manufacturing cost, I believe you have a good point on this as long as the locomotive runs well. As far as I recall you are correct about 5 pole motors running slower, I have locomotives with both and I haven't noticed much difference but to be transparent I focus on shunting operations as opposed to running anything at higher speeds. I think the motors are a matter of opinion really as to what you wish to do on your layout and which type could benefit you. Having worked with some electronics previously I was unsure whether there are serious differences between smd and through pin components, I have done some research and it appears they should act practically identically, even being made from the same die oftentimes. After all why claim a 100 ohm resistor if it doesn't really have that effect, likewise with capacitors. This would improve locomotive repairability and free space but increase production cost. The only time through hole may be preferable would be in conditions of environmental stress such as defence where their physical form would allow them to deal better.

[@anthonybarber3220]

That’s probably what is causing the torque issues with some of the new Hornby models like the 9F and the B12. They have 5 pole motors and they had performance issues when he first reviewed them.

[@trainskitsetc]

​@@anthonybarber3220 his ones had issues, issues he didn't do anything to actually investigate the cause of or show himself doing anything relevant to mitigate, say running them in as per the instructions so really his had issues isn't much of an informative point.

[@zagan1]

​@@trainskitsetc Yeah because you should be able to buy a model then use it as expected. You shouldn't be needing to fix up the model straight after pulling out of the box.

[@trainskitsetc]

@@zagan1 yeah, in a perfect world which last i checked its not. Lol

[@Gma7788]

Yeah but you have 500 model train brands to choose from. No other hobby has that many brands. And you're still complaining.

[@Gma7788]

IMPORTANT MESSAGE TO READERS, this video is teaching me that comments are insignificant to what drives this library. Viewer numbers is King. I am learning what is the big fish in this pond cause I had no idea about this global library publishing thing. It seems I'm right to have done just 1 video on the topic.

[@nicholaskennedy1748]

What a strange video. Everybody makes mistakes, myself, Sam and yourself included - people hate on Sam but I think he's entertaining, informative, and creative - making his own locos from scratch something to be applauded. Sam is so popular because he rightly scrutinises new models against eachother (and lets face it, new Hornby stuff is crap - I would never buy their newer stuff) but he recognises the enjoyment that model trains can provide too. At the end of the day, does it all matter? We're all allowed to have our own tastes, buy what we want, run what we want on our layouts - if someone wants to run Stephenson's rocket with some Freightliner Triang Hornby wagons, you can't send them to jail can you. I can see why you only made one video of this - I think you're eating humble pie after all these comments, take care 😂

[@Gma7788]

No, you failed to introduce yourself and begin a conversation. If you don't have a conversation then you don't get to judge. STOP judging. Stop dishing out wrong information. Stop judging hornby. If you have to judge hornby then it's time you moved on in life and did something else with your short life on earth 🌎

[@nicholaskennedy1748]

@@Gma7788 but then you judge in this video anyway 😅 what a hypocrite. Short life on earth? I think I've got quite a bit longer than you left my friend. Scientific fact that being bitter and twisted shortens lifespan considerably. Goes to show the quality of content you make, if you can't take constructive critisism and tell people to stop commenting unless it's a nice comment 🤣 just turn comments off you absolute clown Just stop with youtube, you're not getting anywhere, I'm going to watch Sam's trains videos now for a reliable, informative and accurate review on some dire hornby products ❤️

[@Gma7788]

You haven't met me yet but you've skipped over introductions and conversation and went straight to judgements and dismissal. You ARE a person who must talk your problems to your doctor before you go posting 📫 judgements in the internet. You've developed a personality complex that puts you in the judge chair 💺. This IS the number one problem of people in the 1st world, Western world 🌎. So, you're not surprising anyone and you're not special. Just a commoner. So from now on, before you begin to say someone is a hypocrite, you have to get permission to say it from your doctor. If you don't, you're most likely to get reported to the authorities for your skipping social introductions and conversation, type of behaviour.

[@Gma7788]

Now we can address your statements. I don't have a conversation with Sam. There's no conversation going on between him and I, so there's no judgements at the end of an informed conversation. No introductions. No conversation. No judgements. Sam attacked a plastic toy manufacturer and I posted 📫 a video pointing 👉 out that that's, NOT On. I pointing out that Sam isn't on the same level as a 100 year old manufacturer. Sam is NOT allowed 🚫 cause he's nowhere near on the same level as a 100 year old plastics manufacturer business. He can't possibly know what they're doing. He can't possibly judge them. Sam is terrible at knowing what SAM is doing. It's our job to report Sam to the authorities for misleading the public. It's my job to report YOU for your antisocial behaviour, skipping introductions and conversation and going straight to nasty little judgements. 😒 People are famous even before they open their mouth.

[@Gma7788]

You say, the quality of my content... Well, your place to contribute is AT YOUR place of contribution. Your part of the world library is at your part of the world library. You don't contribute at my section of the library. You take control of your life and internet contributions by making your videos and comments at your section. People are so terrible that I've been forced into no longer talking to them until they change their abusive behaviour. Business needs to get a dose of reality that people AREN'T HAVING ANY COMMUNICATION WITH EACH OTHER and YOU need a dose of why your communication attempts have all gone wrong and have failed to work. If Sam wants to communicate to hornby, then he must start his factory 🏭 operation and then after 100 years of business, he then becomes able to talk to them. We, the public, are going to warn ⚠️ Sam that he's not on the same level as hornby or any other factory business.

[@kennethmaney914]

Sam appears to be a pure amature, like the neighbor who can't resist messing about with his car until it's rubbish. The RC model aeroplanes people are 50 years ahead of the railway modellers. The radio control which works for points etc. And the electric motors that leave railway manufacturers Way behind. Wake up Hornby, bachmann etc. Even there"NEW STUFF"is out of the arc

[@robloxdude7564]

You don't NEED all this high-tech stuff for a model railways. It's about the fun. For some people, standard DC may be far more fun, using a physical controler with dials, and setting points by hand.

[@1maico1]

Nonsense, my point motors are powered and controlled via DCC through the track.

[@Gma7788]

You don't get to skip over introductions. You don't get to make judgements. You aren't getting lots of FREE STUFF. You're not allowed to make any demands. You chose to not participate in society.

[@Gma7788]

​@Bob Semple you've chosen to not ask questions.

[@Primed_loco]

@@Gma7788 #makeorwellefictionagain

[@Gma7788]

You don't get to judge any more now that the internet has arrived. You must realise this sad for you little fact. I expect you'll realise this after about 2000 years. This prediction is based on your failure to deal with the change from catholic religion to the church of England religion. So, you've got a very bad track record until now. You should try to improve it at some point in time.

[@robinwhitworth2380]

What a load of bollocks!

[@Primed_loco]

what the fuck does religion got to do with model trains? 💀

[@rosslowen3906]

😂 track record. Are you chuffed with this video or is it getting you all steamed up.

[@Gma7788]

​@johnrchurch6147 your place of contribution is somewhere else.

[@Gma7788]

​@@rosslowen3906 Well, this video is an educational tool 🔧. I videoed something and published it into the world 🌎 video library. Now I get to see what it created. It's just gathered 2 thousand viewers in 1 hour but it's been available to see for a long time ⌛️. What you don't see is U tube attacking me so they could promote this type of video. I allowed them to promote it and now it goes way up in viewers. I've only made 1 video about this topic and it's teaching me stuff I wouldn't have thought it would.

[@Gma7788]

Simple chassis you say. Simple in your own sick delusional mind. The reality is it's obviously got years worth of development that's gone into it.

[@Gma7788]

​@@tempertantrum6464 This is my contribution to the video library. You say balls somewhere else.

[@tempertantrum6464]

@@Gma7788 balls

[@SUPRISEMOTHERBLOCKSTER]

@@Gma7788what

[@HeavensGremlin]

Sam is a complete TOSSER...!

[@Gma7788]

Full-time...