I Bought an INFLATABLE Paint Spray Booth from China!

It looks like a Bounce House but it is a fully functional, ventilated spray booth! I ordered it directly from China. You can paint an entire car in it. Let's test it out and see how it works...
Tubine Paint Sprayer System: goo.gl/GizpJE
Instagram: / samcracc
Email Me: [e-mail]
Mail: Samcrac
PO Box 713
Odessa, FL 33556

[@Priorityman1]

Oh man you'll never be able to roll that thing back up into that bag the right way. Trust me I own a sleeping bag

[@andrewhendly9075]

Lmao good point

[@NotoriousMastaG]

exactly. you'll need 1/2 of a garage just to fit that. so the storage sacrifice of it is not worth the buy.

[@james10739]

Thats what i was thinking

[@james10739]

Nice credentials

[@csb772]

It's from China just leave it there. They are so cheap just buy another when the wind blows it to Japan.

[@jclar3565]

I filled mine with helium. I am now over Minnesota

[@bigtwinzr900]

J Clar 🤣🤣

[@JDVpr]

😂😂😂😂😂

[@keepsteddy]

I see you. What's the wifi password?

[@jsb5188]

I inhaled the same helium, and oh man !!! Yeah baby !

[@ricardogarcia3444]

J Clar lpl lol

[@archades54]

PVC conduit rigid pipe inside to act as a frame so if it deflates, it won't collapse onto your painted stuff. You can take it apart afterwards for storage.

[@dragonjerod]

My experience with bounce houses and inflatable pools is that usually blowers(good ones at least) have in and out blowing. If you put them in reverse they will suck all the air out of the booth and it'll make it easier to fold, plus you don't have to wait forever for it to deflate. Try that out, hopefully it works.

[@johnaustin6649]

The Chinese writing said "you ain't never getting that booth back in this bag".

[@vladymartinez1232]

Looool

[@leethalmodz313]

LMFAO

[@EliteGeeks]

Backwards say " Stupid Yankee "

[@adisonteo2836]

Nah it aint lol

[@EliteGeeks]

@Kingy B North Korea Outsourced Model is my guess lol

[@MusicalMercenary]

that separate room would hold equipment, like you said. But it also looks like it's meant to serve as an airlock. Entering through the main clear door constantly would allow contaminants into the room.

[@TradBarbie]

Exactly what it is. He's silly.

[@genesssisss]

That’s exactly what it is...smh

[@aaronjames1830]

spot on

[@MrOlddave]

I did something similar inside my garage, but it would work outside as well. Just threw together a frame of 2x3's and stapled clear plastic over it. Used 4 standard filters from a hot air furnace in the front door and created an exhaust system on the rear with 1x3's to create a duct to an exhaust fan. Worked very well. Painted a whole car. No problems at all. Used a fresh air system instead of a filter mask. I was a professional auto body painter for 5 years so the results basically come from knowledge and practice. You really just need a clean dust free environment and a nice day. No wind and no high humidity. This tent is cool, but expensive. Mine cost $250 approximately.

[@07decker]

The windows, you can see in from outside, and see outside from inside. Yep, thats what a window is for

[@CynthiaWord]

Why don't the windows begin to get a paint film on them? No longer clear?

[@idigdaytona4478]

Make sure any over spray on the walls is dry before you fold it up or you may inadvertently glue it together forever.

[@dw6015]

Na, paint isnt an adheisive. Thats why 90% of painting is prep!

[@misterbulger]

overspray probably dries instantly with all that airflow

[@idigdaytona4478]

Hi D W, I had a body shop years ago and had a guy bring me a Ferrari replica he was building. He had it painted at another shop. He got it home and covered it with a plastic sheet to keep it clean. The plastic stuck to the paint because it will gives off gases from the solvent for some time. I had to strip the car completely. It was not an easy job with the plastic stuck to it.

[@trillrifaxegrindor4411]

that is a slightly different and massively stupid scenario.who in gods name covers fresh paint that hasn't cured and released its solvents in a plastic bag? the person who did this,if he/she is a real human wins "one of the biggest idiot of the entire world" award @@idigdaytona4478

[@idigdaytona4478]

@@trillrifaxegrindor4411 He paid for his lesson in cash. He did feel like an idiot.

[@csbarbourv]

You're supposed to go in the small rooms first. It's essentially an airlock. Go in the door, close it behind you. Open the door into the painting area and close it behind you. Reduces bugs and debris in the painting area. Sometimes opening a door can disturb debris on the ground or in the are around the door.

[@sevagboyajian3168]

@ekul Z what a stupid comment

[@nataliaattree133]

You realize he’s going to have to drive into it right?

[@NickyShweety]

@@nataliaattree133 The big door is only used to get the car in and out. If the car is in the booth with fresh paint on it and fume extractor running, opening that big door will create a huge, unfiltered vacuum source and suck tons of debris in and onto the car's wet paint.

[@RikestRik42]

A little tip from someone who used to run bounce houses for parties back in the day. Some fans have the ability to hook up the inflating sleeves to the intake side of the fan. If you do this, you can suck the excess air straight out and have it completely flat in just a few minutes.

[@dmech5135]

If you do your own body repairs and paint, it will pay for itself. As a auto body painter for decades, I strongly recommend putting on a white Tyvek suit. This way you keep any dust and particles from clothing and hair contained. Over all for the money it works well. I hooked up a vacuum to it and it rolled up nice and tight and I built a wooden box and in it goes. Thanks for the video!

[@MrJoebiz24]

A bouncy house spray booth for a big kid rebuilding big Tonka Toys. It doesn't get any better!

[@ckeller07]

I used to deliver and setup bounce houses for kids parties and events. The big ones are several hundred pounds of heavy plastic :) :)

[@lostintime8651]

I can see painting a car, getting done and losing electricity. Down it comes on to your wet paint. OUCH!

[@bryanmartinez6600]

@@lostintime8651 QUICK GET THE LEAF BLOWER

[@EternalResonance]

Doug DeMuro's cousin? well presented 👍

[@Nairuulagch]

With pvc frame and some cellophane sheets you can make you own bug proof chamber for under $200 or cheaper depending on size.

[@SB-SB]

KZbin must really like this guy. I get suggested his content randomly every other week. Been doing it since Dxp car. Not gonna lie though dude does have content.

[@Samcrac]

Subscribe already! It's totally worth it

[@jimmyvaught]

Lol right! I have a horrible habit of not subbing, yet KZbin does a great job of pushing these channels new content on my home page.

[@Kevlar930]

Exactly how I found this channel and I now watch every video he puts out. Entertaining and informative.

[@person4149]

Sbsb in Chinese is b***h b***h

[@SB-SB]

@@person4149 is it really? Lmfao my Ign for most games is SBtheGiantYo. Its taken from my initials (sb) and a scene from Key and Peele the show. Interesting that my initials mean b*tch lmfao

[@18000rpm]

A bit late but the Chinese text is 汽车篷 which means car tent

[@s.o.c_914]

obviously =)

[@kashmoni1085]

Actually it has two meaning. The other being "butt cloth"

[@sebbekartellen6493]

This is awesome. It’s like an inflatable house with a backstage room and everything!!

[@DrVink86]

What happened with it deflating was exactly what I was afraid of, glad you caught it before it landed on the bumpers. The best part of your videos is you are completely honest. You don't hype everything up more than you should, you give the drawbacks, you show your mistakes. It's very refreshing to see such honesty in videos and I hope you know how appreciated that is!

[@nicholas5623]

Agreed @ Rob Anicich

[@MrJoebiz24]

Rob, spot on!

[@DirceuCorsetti]

I second this. That's what happens with real people, learning by doing. Very refreshing!

[@turborunner]

I wonder if they had one way intake valves so the air can't escape when it's erected. So if the blower motors stop working the booth doesn't deflate like it did.

[@morecrapforputdowns]

Could always set up a makeshift pvc skeleton in similar shape inside of the booth just in case the power fails again.

[@alexanderandalixamarshotwh7003]

My daughter and I screamed when the whole thing started to come down, she loved to see you roll around trying to deflate it!! Thanks for the video...

[@Samcrac]

Loved hearing this. Thanks!

[@AppleJack76]

@@Samcrac Use a shop vac to suck the air out.

[@holmes1956O]

Apple Jack just reverse the blower connections

[@axlef1513]

Legend is, on a quiet night you can still hear Samrac trying to roll his paint booth back into its bag..

[@BITTYBOY121]

Well done Sam... That's one monster spray booth ! and a very handy bit of kit...Great video man ! Massive thumbs up ! 👍👍👍👍👍👍

[@asherstanton4561]

Think about putting plastic wrap over the windows. Cleaning them with any effective cleaner is just as likely to make them cloudy as painting them. Which you will do eventually. Removing the plastic wrap ... just a few seconds and voila, clean windows.

[@grendelum]

The folks who packaged this thing deserve a good video on that process...

[@eganc1976]

6 yr old kid that makes Air Jordan's put that in the bag during his 5min lunch break

[@thedronemediacomvancouver4976]

Love the channel! Really like how you show the mistakes that happen and not pretend you're perfect. Keep it up!

[@superslowmr258]

I'm two years late, but have been playing with the idea of getting an inflatable booth and this video was super helpful to see how it would work for me. Awesome video!

[@captainmarkgray8856]

To get the air out just reverse the air pumps to vaccume.

[@PKmode]

"She's gone from suck to blow!"

[@misterbojangles6205]

Thank you Captain can see you're no pessimist, bravo.

[@BillSmith-ku1tp]

Captain Mark Gray as you roll it up

[@captainmarkgray8856]

I sent this video to my friend who likes working on cars. It can also make a good biohazard wash down room for a low budget film.

[@Alien00420]

@@PKmode i was coming here to make a Spaceballs comment. You beat me to it lol

[@jlp5137]

I had one of those for work. Just make sure that you put paper on the floor and before you spray and it will stay much cleaner

How about just use those big rolls of plastic sheeting? It may have been the 10 ft. x 25 ft. Clear 3.5 mil Plastic Sheeting that I used. I don't remember the exact specs of the sheeting. But when I worked in construction building house foundations, we used the sheeting in the winter to cover our fresh concrete pours. And then I have been buying it for different things at home.

[@jond1965]

I bought the same one and painted my third gen Firebird last year. Got it back in the bag and now a family member is painting their car this spring. I love this booth works great. I put both blowers on different fuses. My 60gal compressor has its own circuit as well. Never popped a fuse. You fold it by folding over each side while forcing out the air. Then roll it from back to front. It's not that difficult. Just requires patients.

[@bto1533]

How much are they.

[@tinajero310]

What’s the link ?

[@wtechboy18]

that segregated room in the back seems like it would be a very effective airlock of sorts for keeping the interior dust-free once you've actually started painting.

[@darkiee69]

And that's what it's for.

[@88corinutza]

or use it as a VIP room lol

[@taschenrechner]

It says 气车篷 qi chepeng. Qi / 气 means "air" and chepeng / 车篷 means something like "carport" or "car awning". Basically it means "inflatable carport".

[@calikev3528]

taschenrechner 谢谢

[@ramshckysk8ter4life]

You should get some horse stall mats to line the floor, it would be more comfortable and even to walk on and it would protect the floor when you drive in or if you dropped something in there

[@VoltSchwibe]

And horse mats would help weigh it down so it won't blow away if a gust comes along while it's empty.

[@mrtriple2414]

Bonus, keep a horse to stand on the mats. If you don’t finish the car, ride the horse to work Monday. If you do, Monday night is steak nite for you and about a hundred friends.

[@ViralKiller]

This would make a nice emergency house

[@vocals4378]

Great video I'm truly interested in getting one of those and never would have thought of it until I seen it

[@TheSparkynks]

Some say he's still trying get it put away

[@sreid4985]

If he just reversed the blower it would collapse very quickly.......

[@rheadog9546]

@@sreid4985think before you type, This guy seems handy enough to figure that one out if possible. some fans don't reverse nor do they have a reverse setup on them. Maybe?

[@erigobelli]

@@rheadog9546 To be honest he didn't estimate power consumption before plugging everything on the same breaker so, mistakes can happen.

[@sreid4985]

In about 2 minutes I can turn that blower around, duct tape a cardboard plenum to keep it from collapsing, and pull a vacuum on the whole plastic rig. He didn't mention having solved that issue, so I offered. What is your issue,,,,,,,,,,,,,,?

[@AwesomeBlackDude]

I went to his house and pop it with an Barbie pin but hey don't tell nobody.,😁

[@blitzbbffl]

Sam, you may need to purchase an inflatable garage to store your new inflatable paint booth!

[@titanuranus]

Good thinking. My inflatable wife agrees.

[@pgharaghani28]

@@titanuranus ahahaha brilliant comment 🙌🏼😂😂 thanks for the laugh😁

[@Gimbergp]

Then buy an inflatable house to store them both

[@voiidzv5147]

@@titanuranus lollllll

[@DaKiddSkyy]

I think I can. it's almost like folding tarps.

[@mattpolitzer2920]

Thanks Sam. You inspired me to get something similar and do this at my shop!

[@jovanies9751]

Thats awesome. I would love to have one of these

[@replysoon3216]

lol forget spray painting, this would make a great party tent for the beach!

[@dr.najeebullahqadir5858]

I was thinking. Put this aside ur university and forget hostel rooms live in there just put some solar panels on the roof buy a small car to park inside (optional) and ur good to go

[@DarrylSolemen138t]

Facts!

[@nicv9358]

You really ganna carry a 600 pound box of chinese plastic to the beach? Good luck

[@replysoon3216]

Nic V it’s not 600 pounds. Maybe about 200 the most. Use a dolly to carry it.

[@mickjones8757]

@port nut yes but your comfi

[@fpvclub7256]

Very cool.. a couple tips .. spray the initial coat super light to create a nice tacky surface. Try and complete a complete pass across the object each pass, do not criss-cross or do back-and-forth in small areas. You will find you get a much better finish and less runs if you do these simple steps. :)

[@jakecummings9024]

FPV Club literally not sure how anyone could run a base coat

[@baronvolkov6172]

@@jakecummings9024 not reading the data sheet and over-reducing it 1:1 instead of 2:1

[@serbia991]

@@jakecummings9024 it happens man it happens

[@johannkuhn5685]

Sound advice you have there. I don't personally have noteworthy experience with a spary gun, but that's basically what I do with rattle cans, and it works well. I do someitmes criss-cross (if needed), but not like he did (long strokes, instead of his typical rattle can short stroke method). Of course before that you have to do proper prep work, and not have any surface imperfections that would pop out once you add clearcoat.

[@6364Chevyguy]

Very nice video. It answered a lot of my questions about those booths. Thank you.

[@MittyNuke1]

LOL I'm still watching but I couldn't stop laughing when I saw the box vs the video caption. That's hilarious, spray booth in a box 😂😂

[@donmadick6813]

To deflate it, hook up a good sized shop vac to it. That's what I use to deflate things, like inflatable mattresses and beach toys etc. It works great.

[@tonycavez]

exactly

[@RonHaslam2001]

"汽車蓬“ means "Car Canopy"

[@Valen46442]

Does 車 means car in chinese? Its the same as japanese then (i know japan brought kanji from china)

[@RonHaslam2001]

@@Valen46442 normally, "車" means something has wheels, "汽車" means passenger car in Chinese. In Japanese, passenger car is "自動車".

[@iibadsportii690]

Y’all smart dudes tip of the hat 🎩

[@jblob5764]

@@RonHaslam2001 thank you for sharing! That is really cool to know i wish i had any idea what i was looking at when i see those symbols

[@BobPegram]

Sam, get Google Translate Mobile for your phone. It not only translates what you take a picture of, but I believe it removes the original text and replaces it with the translation. Real cool trick.

[@VFL720]

rollin this thing back up is "kind of a nightmare"..... Thats exactly what I was thinking as you were taking it out of the package! I have a bad enough time as it is with the inflatable bed I have lol

[@t-roller9958]

Fold it and roll it toward the end with the hole in. Then use ratchet straps to hold it together. I used to do this every weekend with bouncy houses and inflatable race tracks.

[@ZLRob]

Okay, not only was this video damn hilarious, but I have also never wanted an inflatable spray booth more in my life.

[@themainguy5050]

Next product instant inflatable house from China. Lol what can't you get on the internet?

[@vagabondjay7281]

LOL, Right?!

[@likahmac]

they did start 3d printing them and ppl have started aswell in the US

[@malcolmhardwick4258]

Nu they've been on sale for a while now

[@chrisj197438]

I’d sleep great with the fan noise

[@yousefosman8094]

Nu you’re not looking hard enough

[@Metalsuitman]

Love this video. Great job. Entertaining and informative. Funny guy.

[@KrogerCulinary411]

Nice video. Thanks!

[@edventures9884]

Doug’s reviewing homes now and Samcrac’s reviewing paint booths, awesome! 😅

[@lookawaygrstay9357]

Quirky.

[@robertmartin2387]

Suck it flat by reversing your blower. Set the blower in the opening and let them flatten the thing out for you.

[@HoStev]

Apparently Sam hasn't used an air mattress before. Just gotta reverse it 😁

[@jorgeposadas1192]

I'd forgotten all about this video, utube and it's algorithm brought it back to my attention, I really enjoyed the video, thanks.

[@jr42a1]

What a trip !! I just bought a bounce house from the Chinese and it looks like this paint booth !! someones double dipping !!

[@thevandivers]

Plus: It won't require a building permit and inspections to set-up! :)

[@vadimnesen8060]

Lol permits. Never dealt with those

[@HandsomeMoose]

WOW! I could rent out that thing on Airbnb and make a fortune 😁

[@chrisrobles2012]

Air bounce and breakfast ! Love that site!

[@jimmygrant3212]

Stealth only in California though.

[@wolvenar]

Emphasis on the air.

[@Z_TPI]

I got 5 on it

[@jbooth8539]

Liked your video. Good presenter..no, really good presentation. Thanks for making this Vid. I'm sold on the idea of this inflatable paint booth.

[@bte-by4de]

It’s similar to a bounce house when they come in boxes as well.👍🏻

[@jesseleon4501]

That's my new camping tent.

[@DuckQu]

Should probably get a vacuum to help deflate

[@n01928]

My air mattress runs the pump in reverse for this. I'm surprised they dont have the same thing.

[@mycosys]

@@n01928 you just attach it to the inlet - thats why its the same shape as teh outlet

[@tayokarate]

That Lincoln looks awesome

[@ufowatch]

i want one of these it is perfect for a backyard bar and 2 blow up hot tubs! or a paint booth i guess lol.

[@buggeroff9]

That thing is sick man! You could have a party on there.

[@lcrazy8l]

The adult moon bounce.

[@kenwalz7231]

Too Cool! I wish these were available back when I painted. I will pass this video on to my painter friends!

[@rockierok3899]

Excellent room for the in-laws, thank you sir

[@jeffchabotte]

So tell us more about the bounce house manufacturer that’s building one for you at a custom size...

[@fahmiahmed1269]

Found in recommended videos, enjoyed it

[@Uneedhelp91]

Sam, you need bigger ground stakes to keep that safe. Look for bouncy house ground 18" Steel Hook Stakes...did a quick search and found the 18" ones for $5 each.

[@brianborell4469]

You can also you dog tie outs too.

[@chrisrobles2012]

There’s also a 2000 lb vehicle that’s inside . But yeah for those few minutes before and after, there really should be some extra tie downs but mostly from the top to secure from swaying.

[@Uneedhelp91]

I said this as he was painting with only the front and rear bumpers in the bouncy house.

[@ne2i]

They are called earth screws

[@scorpionsedge]

those plastic ones won't last very long, I replaced all of my stakes with metal ones.

[@morkomally9702]

Just seen this ,pretty impressive ,getting one

[@nicvic2323]

im amazed at how that fit in that little box

[@allyblair]

as someone with experience in the ammusements industry, I can tell you that to properly pack a large inflatable requires multiple people. you pull the inflatable as flat and even as possible on the end farthest from the air inlet, fold it over about one foot and step on it all the way across. repeat the fold and step process all the way to the inlet and it should be as flat as you can get it, then fold/roll the resultant roll till it fits in the bag. Great video Hope this helps in the future.

[@motersickel]

I have an idea of course someone may have already said this I don't quite feel like searching the comments though but as an insurance if you're painting a car I would go out and buy some three-quarter inch PVC piping and slip together a frame that you can push against the walls and semi attach it that way if you lose air the system won't come crashing down on your freshly painted cars or parts....would be very simple to build basically a PVC box inside of it that way you can cut the air and let the thing droop down on it without damaging your work.... but don't permanently glue your PVC piping just slip fit everything together

[@chronicawareness9986]

100$ for 1,000 square feet of strong poly..same thing marijuana growers use for grow rooms. then like 30-50$ in wood and you have a paint booth. and plenty of poly... can make it so you can take it down and reuse it too.

[@themessenger5868]

Wow Gary, we think the same. I just read your comment and it's almost exactly the same as mine. I didn't steal your idea...honest. It just made common sense to me to suggest the pvc. It was something I had thought of immediately after he erected the booth. It's what I would do... Great minds think alike.

[@chronicawareness9986]

@@themessenger5868 haha =)

[@SpencerFcp]

I mean, if you are going to do that, you might as well avoid buying the booth altogether. Just create the PVC box and lay down your own plastic on it.

[@themessenger5868]

@@SpencerFcp No way ! PVC is easy as...but to create this enclosure out of plastic and tape would be a nightmare...in my opinion.

[@westcoastronnieOC714]

This could also be used for parties To serve food and also as a banquet room. This is great I'm going to get one of these.

[@jasonyoung6420]

if it's good enough for Tesla, it should be good enough for Sam Crac

[@keon5779]

That explains why they all have awful paint.

[@paulcarmi8130]

Elon Musk disliked this

[@jblob5764]

Do they actually use inflatable booths?

[@Zementkopf58]

Man this comment really gets me 😂👌

[@alexlindsay392]

J Blob No but one of the Model 3 assembly lines is in a massive tent like structure outside.

[@rainjuice5774]

Make sure to leave it open so the bugs get in

[@IceLynne]

Exactly! lol

[@johantryggvesson83]

😂

[@Lawrencelovesfish]

Or rain

[@thomasl7917]

Itll match the shit work this guy Does

[@tonycavez]

bug/insect spray cures that fast

[@koruoverland]

@samcrac There are 2 relief zippers on each side to quickly deflate the paint booth. Check the bottom right and left edges for a a 4 foot velcro strip that is covering the zipper.

[@citroNord]

A leaf blower/vacuum is the perfect tool to deflate the thing! :-)

[@BeastlyGarage]

Just make a PCV skeletal structure on the inside to protect it from accidentally collapsing. Should only cost a few bucks.

[@yeahnah7220]

or use guide ropes via some d-rings that any doofus would have specified to be integrated in a custom build like this. this guy is beyond doofus level though.

[@willefixit]

good idea. maybe more than one use cool idea painted out side more than once lol

[@jonandthey8894]

Beastly Garage that’s thinking ahead

[@KrustyKlown]

yes, a few poles, and ropes on outside ...to support in case of power failure, and to tie the darn thing down so the wind doesn't lift it (those little stakes he put in, aren't going to help much)

[@fuckngreat8955]

PCV?????? U mean PVC?

[@billstevenson7381]

Sam, I'm literally "BLOWN"away... no pun intended... fantastic video.

[@brianminkc]

Wheeee! I bet your neighbors love it!

[@kevingregoire2764]

Thanks for the post. Good to know.

[@chuckkemp6879]

Use a shop vac to finish deflating prior to folding up. We do this to pack helicopter emergency floats which pack into a tight envelop when not deployed.

[@LJT7907]

same works for large inflatable toys or blow up mattress. Saves a lot of frustration.

[@slav7221]

I bought the same one but I don’t have a inflator so I had to blow it up the old fashioned away .. I’ve been at it for years... and I’ve lost a whole Lung.

[@sjfllc]

ahahahaahah

[@sunnyhaibin]

Where did you buy it? Do you have a link?

[@moazmumtaz1847]

Sla V got a real good laugh out of this Man U made my day lol

[@BobbyJr556]

🤣😂 omfg, seriously broke down laughing/crying when I saw your comment 😂👍🏻

[@chuckbuckets1]

you haven't really lost it. its definitely in the bounce house somewhere. even if you're lucky enough to find it you'll never be able to reach it.

[@leosorbello7732]

Awesome ,love it .

[@cowcatpro5395]

samcrac made me crac up

[@unlawfulpatriot7424]

Him- *wants a clean room to paint the car* Also him- *leaves the damn door open*

[@ThunderWindz]

I would have to have a tent trip with this guy lol.

[@davidshareefChTPhD]

I was thinking the same thing I swear to God

[@johncox1221]

and sanded dry

[@TechTokOffical]

This guy clearly has no idea what he's doing

[@TechTokOffical]

U need to learn how to paint before u go wasting money on a booth. My cousin is a professional and paints outside at home all the time. U obviously don't know how important prep is over an inflatable spray booth

[@user-lo4er8wy9l]

You have a great attitude and independent spirit. Keep up the good work.

[@sydsyd]

It looks like a modified fun house. Very interesting idea.

[@nukezat]

This is a perfect disposable Burning man tent!

[@TheCaptMax]

Just remember to bring 5gals of baby oil. Entrance by invitation only. 🤣🤣🤣

[@jaredshadley]

Might want to get some ply to make a solid floor turning the wheels on a car while stationary or moving slowly can tear the floor.

[@DBeMeNLV]

Not the first time that he's bought something inflatable.

[@DBeMeNLV]

@John Evans 😂😂👍

[@dragondescendant1]

A blow up Barbie doll.

[@bvernon97]

I hope you're talking about tires 😂😂

[@Laffy1345]

😂😂😂😂

[@bingskiddd]

Bwahahahahaha awesome bro..................... I bet he has a few insertable hard objects too...........

[@DarenSaroop]

I deflate my inflatable beds by reversing my shop-vac hose. Might work for this if you tie the second blower inlet.

[@pressplay1703]

Was wondering how hard it gets to deflate and pack after it has dry layers of paint on it.

[@renierbonthuyzen9703]

When you take it down, make sure it is completely dry and then invert the blowers. They suck out all the air. It works for bounce houses. It should work for that too.

[@hanskinslo326]

Good advice

[@at0mlx]

Your *never* getting that thing in the bag again

[@lalleprutt868]

He must let the air out first, otherwise he will not succeed.

[@jharris947]

No shit, Sherlock.

[@thehop639]

Ha ha quality!

[@jimcole6423]

Unless you're Chinese.

[@southwestsearch]

Why not much room? Unlike a solid structure, you can press your back into the entire structure to create more room. Also the windows are offset giving you additional space. What a great idea!! Unfortunately, I have no use for it.

[@mechanickb4350]

Leeeemmeee jus say... I loved your video. It was informative, and hilarious. I have wanted one of these for quite some time now. But have been very sceptical. It's nice to see someone actually show it in action. Thanks and good luck. Couple quick questions. Does it leak in the rain? Could you leave it up for a long period say a couple weeks? And lastly what are the inside dimensions? Thanks bro and go Gators!!

[@cjswindell1704]

Have you measured the dimensions yet? Curious to know. I’ve been looking at the 28x15 and 26x15. Anything above that is huge to me. Curious to know

[@duhwolf6413]

Steps back to admire perfect paint job then.... power goes out.

[@My65isblack]

That's why you have a plan B. PVC pipe inside to hold it in place or some rope on the outside to hold it in place. Just in case breaker pops or power goes out

[@brandonerwin3019]

This is the reason I’d run it on a generator

[@davidmiller2719]

He did state early on his last video that he was a novice.

[@bobbynelson2481]

I was going to say the same thing

[@jrsgarage7623]

I thought same thing you would have that tent in the paint

[@juliuspillora8252]

You could try reversing the blower. Make it suck inside to deflate it.

[@divertechnology]

woww man, just give it ime.. its obvisly not supposed to be inflated an deinflated very often

[@TJ-qz6hr]

Julius Pillora It already sucks inside.

[@shukeelc5177]

Brilliant for valeting and polishing in damp weather etc

[@kllgrogto5838]

I also like windows that " if you are out it will let you see in" and "if you are in it will let you see out" amazing!!

[@jonsmith6496]

These will be in harbor freight by weeks end!

[@g36killer]

For free!

[@willefixit]

@@g36killer too much!lol