I Found $4,000 in Parts DESTROYED on my Repo Aston Martin after Pulling its Transmission!

Download State of Survival now: stateofsurviva...
Enter to win a Lamborghini!
We pulled the transmission, torque tube, and header on my cheap manual repossessed Aston Martin V8 Vantage and found exactly why it won't run! It's parts we're destroyed and we're going to have to fix it, but the price for JUST the parts are extremely expensive!!!
Instagram: / samcracc
Email Me: [e-mail]

[@Samcrac]

$25,000 for an Aston that needs thousands in repair, or a Free Huracan? Download State of Survival now: stateofsurvival.co/samcrac Enter to win a Lamborghini!

[@probablynotwearingpants6228]

Its Sunday and football is on Sam. Maybe later.

[@tommyv010]

Get a car lift you cheap bastard.

[@jamer15961]

Get a lift, please

[@crazyman8472]

If I win a Lamborghini, I'm selling it right away! 🤑

[@dionrau5580]

Pass on the eye talion.

[@RichRebuilds]

Hello, its me...

[@Rastor0]

I hope Sam is paying you for these songs because they are gold

[@2kcars507]

The stroop wafel clutch brought you out....

[@glasjanus]

@@2kcars507 going Dutch?

[@mikedodge3910]

You are so awesome! Thank you for making this video watchable!

[@soldiers-nf2ps]

Your a fraud

[@yugo4576]

It's simply mind boggling that this man refuses to get a car lift. I got my 4 post lift 12 years ago and it was $2k. Not the commercial quality but still works today with no issues. Even if the price is doubled now, it'd be worth every penny.

[@kiwisfromhell]

What a beautiful "Hello" rendition by Rich. Brings a tear to my eye. And stomach acid to my throat.

[@the_duke_of_bork8702]

Not a dry seat in the house.

[@markmckinley5989]

Best part of the video

[@KrustyKlown]

Rich from "the other side" .. LOL.

[@802Garage]

I just love that we get to watch someone work on an Aston Martin who cares about spending $60 on transmission fluid.

[@actschp1]

That's cause he has the mentality of a used car sales lot owner. Sam is not a mechanic. Zero mechanical instincts.

[@802Garage]

@@actschp1 That's one angle, but I'm thinking I would be the same way. Don't care what I'm working on, if I can save money without getting a bad result, I do! Obviously I won't reuse well used transmission fluid, but if I just put in brand new for example and have to drain it, you bet I'm gonna try! :D

[@Clearanceman2]

Yeah but it looked almost new.

[@MN543MN]

Now that’s some quality singing 😆

[@joho0]

Rich the Sad Clutch sings all your favorite hits.

[@markgarcia7553]

Made me laugh thanks

[@InquisitiveMind876]

Thats wen i hit the like button lol

[@buggerlugz6753]

We really need to get David Guetta to do a remix version for the next ministry of sound album!

[@jonswenson]

I like the flute and piano accompaniment. lol.

[@Zyworski]

When working under a car, I do not rely solely upon the jack stands because pulling on something can rock the car off the stands. I always like to slide one extra bulky thing under the car as an insurance policy.

[@Tracker5111]

Like a tire...that works

[@Acrowat40]

Whenever I work on brakes etc, the wheel always goes under the car as well. It's the difference between a crushed leg or a scratched alloy

[@TwoScoopsofDestroyer]

I was cringing at sam's "eye protection" closing his eyes while he ran the impact overhead.

[@EdwardRatliff]

Yeah I use a couple cut off cross ties.

[@Laugh1ngboy]

This is why I like ramps for the front or the back as long as I am not taking off all wheels.

[@dpravesh5361]

Sam, please invest in a shop lift for the barn. It's much safer than this method.

[@jimzucker]

i'm sure bendpak will give him one for free

[@georgemartin1436]

Yeah my colon seizes up seeing them working under there like that!

[@christianblicher1358]

Maybe his step mom could finance it!

[@markmurphy2543]

You would think he would spend some of his KZbin millions and buy one :-)

[@tdevosodense]

Yes , get a proper lift 👍

[@GM-fh5jp]

That was about the most dangerous transmission removal I've seen in many years. Two guys under a 2 tonne car on axle stands heaving on a gearbox. I was just waiting for it to slip the stands and come crashing down...think it can't happen? I've seen more secure axle stand setups slip off under less sideways load than that.

[@miketdavies]

PLEASE PLEASE PLEASE don't ever do that again! To other viewers: THAT WAS EXTREMELY UNSAFE! To quote AvE: Not only will this kill you, it will hurt the whole time you are dying. Damn, even throwing the wheels under the side frame would have been less stressful.

[@Watts378]

Facts.

[@Rekt-M8-v4]

So what are you supposed to do?

[@KULTJAH]

@@Rekt-M8-v4 go to the dealer wink wink lol

[@jayskoony9570]

@@Rekt-M8-v4 put the stands under another part that is solid. Frame rails, body mounts. Places like that. What happens is when stands are under springs like they are here. When alot of weight is suddenly removed from car the springs will open a little cause less weight, causing where they are to slant. They can slip out from under control arms because where they were horizontal now weights off they slant. + With enough sideway motion and they can slip out from under car the same way, especially if sway bar is off. Now imagine having both at same time. If I ever have to do that, I leave the jack barely touching a solid place on car. Just in case it does slip the jack will take weight till I can get out from car. Or shove a wheel and rim under the frame of car. Rather dented wheel the smashed head.

[@stevec5657]

Do some research for aftermarket performance clutch parts and a throw out bearing. Some quick check on a few forums revealed the factory clutch assemblies in the pre '09 Aston Martins seems to be their weakness, so if it was me I wouldn't replace it with a factory setup.

[@buggerlugz6753]

totally, i can't see an after-market far superior one costing any more than Astons.

[@jb678901]

@@buggerlugz6753 Looks like they too go for between $3500 and $4000 for a clutch assembly. Yikes!

[@jerrydwyer9057]

I never replaced my flywheel with 3 clutch jobs on 1 car. Gotta be the majortity of the 4k price.

[@ces69]

@@jerrydwyer9057 Yup, just get it refaced at a machine shop!

[@ssnerd583]

@@ces69 if they are really burnt blue, you cant machine enough off before you get below minimum thickness and they will judder like mad if you leave burnt spots on them.....dont ask me how I know this to be true...lol 0_o

[@Velo1010]

Of all the work you and your friends do on auction finds, have you considered installing a lift? So you don’t have to crawl on the ground making it hard to do work under the car.

[@MrCoolio1037]

For someone complaining about $60 of trans fluid in an ASTIN MARTIN probably isn’t going to be privy to spend 3.5-5k

[@simcore717]

@@MrCoolio1037 3.5-5K? what kind of janky lifts are you looking at?

[@danovich]

Are you never gonna get a proper lift so you don't have to lay around on the ground all the time :D

[@georgemartin1436]

Yeah my colon seizes up seeing them working under there like that!

[@PeanutButter-19]

No chance of making a “Stuck” video with the stepmother if he got a lift.

[@yepyepyepyep1407]

Working on a lift is a god send. Having to work on the ground is a huge pain in the ass

[@hamskyxxx]

Farmers don't need lifts

[@TiptronicSS]

But that doesn't fit with the farm 😅😜

[@wurlyone4685]

Rich's talents literally know no bounds...

[@davidpeterson5186]

Best example of “Engage safety squints” I have seen! LOL

[@wpgspecb]

Agreed the lack of safety in Sams videos is a major turn off.

[@danielnelson4881]

@@wpgspecb Agreed. I understand being cheap and doing certain things that may be a bit sketch because you're broke. I do not, however, understand being straight up ignorant and doing things the way Sam does just because he's lazy? Because he's cheap? Would be my best guess... There are some things where, if you don't have the correct safety equipment, you aren't doin that thing! Seems like that's never the case for Sam. I haven't watched this whole video yet so I'm not sure what you guys are talking about, I'm sure it's idiotic though.

[@Alps6408]

An episode where Sam works on his car!! awesome, good stuff Sam! can't wait to see the first drive.

[@atrahasis3899]

The parting song brought tears to my eyes. Not sure whether it was the sentiment, or the awfulness. Either way, I was sobbing like a small girl.

[@tonycove4488]

Check out Bamford Rose. Better than factory clutch which is less than ideal.

[@tysonparker7403]

I love seeing you DIY’ing the work. It shows you are not afraid to tackle the work and gives confidence to others. Enjoying the content.

[@justinregister795]

Rich’s part was HILARIOUS!

[@MajorOutage]

Sam's floor jack: *squealing noises* Rich: Something is calling to me! I hear the song of my people!

[@MapOfEurasia]

Dang that thing was obliterated! Almost 4000$ for a clutch?? I'll bet the Jag one is cheaper 😁 The Uncle Rich cameo is awesome 😂😂😂

[@SpawnyWhippet]

When I had an Aston, I kept trying to use almost identical Jaguar XKR parts that were 1/10th of the price but they had minute differences that made them incompatible. Eg the brake rotors were exactly the same, apart from a couple of mm difference in the lug hole spacing so they wouldn't fit the Aston hub.

[@CR7659]

@@SpawnyWhippet That's what a drill press is for

[@offroadspecialties7383]

@@CR7659 People in the high end car world are so silly about modifying parts to interchange. It's not a big deal but they forget it's just metal.

[@racerx8410712]

Hoovies Chris Fix impression and now Rich's singing...comedy gold!!!

[@Killahbytenews]

Love your videos Sam. Keep them coming!

[@Samcrac]

Glad you like them!

[@erica2964]

Mike sure does have a lot of faith in Sam’s strength… “mike, if this thing falls it’s going to hit your balls” mikes response “well just hold it!”🤣🤣🤣 I’m crying

[@nemrac72k]

“Hold on I’m going to lay right here, just do gently, Not all at once” this had me lmao. I have to get my mind out of the gutter 😂🤣

[@redguard2529]

😅 I thought stepmom was back. 🤗

[@GarageAddiction]

Every other KZbinr: Check out my new shop and 30 lifts! Samcrac: I've got a rooster and some jackstands

[@deancain9387]

the throw out bearing crosses with a ford part number but cant find the info as to what it fits. I would try to look at the same year mustang clutch. part numbers may very but look at the specs. good luck

[@CR7659]

It was a throw out bearing until he saw the price then it became a throw up bearing

[@HollywoodMechanic]

No, it does not come on any mustang lol

[@helipeek2736]

That’s for the standard clutch, which, trust me, you really don’t want. You need the light weight flywheel and the twin plate clutch upgrade.

[@williamwade3738]

Upgrade????, this guy is too cheap to buy impact sockets

[@danielnelson4881]

I understand the flywheel, but why the twin plate clutch? Something wrong with the regular one? Not really up to the task this car asks of it?

[@hiteck007]

@@danielnelson4881 it's more clutch surface area to work with so it'll be more bighty when released & last longer.

[@toddfenton9930]

That will be $10,000. 😂😂

[@trbstang]

And what is the price of a rebuilt clutch? Hopefully half of that or so. Great to see that Rich is still haunting you!

[@vipergtsr]

I got so much anxiety watching you guys remove that transmission on the ground! Was waiting for it to fall any second.

[@Moonsauc3]

Imagine Sam lending Mike the car for the weekend with the transmission missing

[@luiseduardodelgadoflores4497]

I do not understand why Rich and Steve don't have a record deal yet! Powerful performance guys!

[@mindblownwatcher8536]

See if u can Have the clutch disc relined and the flywheel surfaced

[@bigfootdarrell13]

best option, especially for a flip...

[@MichaelJames-lz7ni]

NOPE - that clutch is total trash - the only place that thing belongs is a dumpster.

[@mindblownwatcher8536]

@@MichaelJames-lz7ni You obviously know nothing about rebuilding discs. And the flywheel can be heat treated and resurfaced.

[@MichaelJames-lz7ni]

@@mindblownwatcher8536 ANYONE in the market for an Aston Martin is not going to watch that hunk of crap pulled-apart on youtube and go "oh, yea, let's just rebuild that instead of get a new one...." No shop will guarantee resurfacing on a high-performance Exotic, or even have the specs handy to even try. Enjoy your Kia, kiddo. Tell the high-school-dropouts behind the counter at O'Reilly's we said 'hello'.

[@mindblownwatcher8536]

@@MichaelJames-lz7ni Well, we will see wont we.

[@glassvial]

If you can get good aftermarket and/or get the clutch relined (and the flywheel redone, etc.) and that's all this thing needs other than some maintenance, you could have a homerun on your hands here, Sam. Be sure to bring it back to Tavarish after you're done (and after your friend gets to drive it for the weekend to give it a shake down).

[@doronc.5297]

Too funny especially Rich's singing at the end 🤣 😂 😆 😄 😅!!!

[@jamesfischer5718]

As nice and fancy as that transmission jack looks, it probably would have been easier to get under the gearbox and bench press it out.

[@MrSparc]

Invest in a lift! One day like others you or one of your friends can be injured and you will feel irresponsible and regret no buy it before the bad things happened

[@iiplaya]

I get what you’re saying but what’s so unsafe about jack stands i don’t get it??

[@MrSparc]

@@iiplaya A transmission clutch like that weights aprox. 70kgs / 155 pounds. Now imagine you lying on the floor under that transmission and it fall of over your chest... no comments

[@kirya312]

@@MrSparc clutch? maybe you mean the transmission itself weights that much?

[@MrSparc]

@@kirya312 the example I did was clear enough about the risk of lying under a weight like a transmission as we saw in this video...

[@iiplaya]

@@MrSparc my bad i wasn’t paying attention to the transmission drop part…

[@balhaarr]

Mike did a insane job, well done. Damn.

[@jonezy300]

Hey Samcrac! A lift costs less than that clutch!!! Would setup so nicely in your horse stall area. Just sayin.

[@kilohotel6750]

For the price of that POS Aston he could get a nice General Steel shop and lift.

[@johnkelly5156]

He doesn’t want one because it would mean that he’s no longer doing a diy home rebuild.

[@charlesvlcek2550]

Under $3000 on Amazon

[@gregh7457]

NO, just sayin...

[@MyweathernetreportsBlogspot]

He may be renting the farm and can not install a lift. Just thinking out loud.

[@pgtmr2713]

It's gonna look great all cleaned up. Love the wheels.

[@anonymous4298]

You got a respect the fact that these warriors were doing this in a barn with a bunch of ants chewing at their backs and legs

[@Samcrac]

You know it

[@michaelbloom5342]

People who aren't familiar with Fire Ants cannot relate to this comment.

[@yungtooli]

and a rooster that was gonna get em

[@simonbailey2151]

Absolutely. I’d still love Sam to get a bloody lift though.

[@gregh7457]

@@simonbailey2151 what part of "no it will mess up my barn" don't you understand?

[@carljohnson6684]

I have to say…… I didn’t see that end coming. Yes I knew the clutch was was gonna cost but the singing….. made my evening 😂😂

[@petrhoward]

Friction lings and brake repair jobbers can replace the linings for a couple of hundred. No need to go to Astin Martin for a clutch plate.

[@bigkev10101]

Glad you are working on the cool car. Looking forward to the seeing the repairs needed. This is what I like seeing. Thanks

[@SalvadorJacoboMx]

Keep doing this sam, grettings from mexico.

[@SD-unlimited]

9:10 The moment you transcend the mechanic/friend relationship and gain a new level of trust.

[@casey2562]

Glad i waited till the end.......Rich made me laugh out loud

[@ilsando3550]

This is definitely in my top 5 KZbin channels. Love it and Rich's cameo

[@save2rave61]

Damn. Watching those jack stands shaking. Made me glad I use cinders with caps and wood under each four corner of the frame.

[@instigator9896]

Holy crap did you see they only had TWO STANDS in contact with the vehicle? The other two were just floating underneath, HOPING to catch something if the car decided to drop.....

[@save2rave61]

@@instigator9896 yeah it was very unsafe. I’ve learned if I’m under my z4. I put cinder blocks with cinder caps on top and a board of wood at each corner of the undercarriage now. It doesn’t move at all and still can remove anything I need to.

[@instigator9896]

@@save2rave61 Yep, I'll put 2 Jackstands (one at each wheel point) and then I'll put a hydraulic jack at the center front or center rear depending on where I'm going under. Minimum 3 supports at all times, and I only work the front OR the rear. If the whole car is in the air, stand at each corner and front/rear jacks.

[@pandasracing6984]

That's some widowmaker jack stands setup. No doubt about it!

[@sfm.x]

Sam needs to invest in a lift....just one. Those jacks n the stands are sketchy

[@SandrodelGreco]

Sam is a man of the people! He doesn't need a lift!

[@jaswingrove]

Awesome ep .. one BIG question Sam, i can’t believe you haven’t installed even the simplest of lifts in that space. An ep on installing something would be awesome and can only imagine what a huge difference to your sanity and body one would have been for this job!

[@Acrowat40]

Blows my mind he still hasn't got a two post lift...

[@dantheman9395]

This channel is like a car person soap opera. Lol. Love it

[@deanprichard4188]

You can get a velocity ap twin plate clutch for the same price that will last a lot longer

[@FlyingScud]

Awsome. I love your cynicism about AM products being made from bits of Volvo Ford (and Jaguar). Can't wait to see how you get on.....

[@carnivorousllama]

Sam has lived with chickens for so long that he now talks like Foghorn Leghorn himself. "That's a joke" @ 5:40 Also, his jack makes chicken sounds!

[@CR7659]

I thought it was a duck

[@greatdaneacdc]

On a lot of unique vehicles where parts are either hellish expensive or very hard to find ,there are shops that rebuilt them. Great show !

[@broomad]

Great video Sam - the prices of those parts is a disgrace !!! At those prices you would think they were made of gold and yet they are nothing special. I'll bet there is an aftermarket upgrade for less !!!!

[@user-od9iz9cv1w]

It will turn out to be a standard Ford or Volvo part available everywhere for dirt cheap.

[@gazzafloss]

Probably just some Chinese P.O.S. parts anyway...

[@nunya2814]

DANG! That flywheel saw some heat!

[@alanleclair1]

OMG that is seriously some funny shit. You and Rich crushed that ending!! 😂💪👏🎉

[@rainhealing4435]

,dkkjiejei

[@bluedog373]

Better keep looking. That clutch didn't look bad enough to lose drive completely. Check the drive shaft and gear box shafts.

[@birdboy48]

My thought as well...

[@liammahoney72]

I pissed myself when rich started singing… love your content so much.

[@BloodSweatandGearsGA]

9:50 “Just do gently, not all at once” …That’s what she said 😂🤣

[@haseebahmed3262]

The ending was so emotional, my ears are bleeding.

[@Johnjakfay1969]

Really enjoying these videos Sam! gotta hand it to you for going so far out on a limb with these cars. Keep it coming!

[@MannyAlvaActor]

Dude, that’s what’s making me consider selling my Aston is knowing when my clutch goes it’ll be over $4k!! But I hear if you switch to a twin plate, it makes it much more fun to drive.

[@Samcrac]

I'm going to show you a good solution for literally hundreds next video.

[@southjerseysound7340]

@@Samcrac HR clutch in Bensalem PA can reline/rebuild it for a fraction of that cost. They're one of the best around when it comes to exotic stuff. I also have a spring and brake shop that rebuilds them that's even cheaper. But he doesn't like to do stuff he doesn't know and while there's not much he doesn't know the only exotic stuff he'll touch is older Ferraris.

[@4rd17]

Hes going to install a compatible ford clutch or something lol

[@4rd17]

Probably volvo

[@kris8742]

@@Samcrac Ford

[@jcreeker5581]

We used to have a shop where I live that would rebuild a clutch disc. They would put new clutch materials and springs onto your old disc. Often the cost was less than $500. Worth checking out to see if you have a local shop near you that can do the same. They would also rebuild the PP.

[@plainbrownwrapper9688]

I always laugh when Rich sings you songs. I still laugh when he did that "Hello darkness my old friend" on some POS you bought. Keep up the great work....Rich.

[@travislivengood2744]

Listening to Sam work on stuff is like listening to John C Reilly work on stuff.

[@shirecain2129]

You can have clutches and pressure plates rebuilt for a fraction of the cost of new aftermarket. As well they can change the friction material to ceramic or organic/ceramic mix. Great option for high end cars

[@gregh7457]

what i don't understand is why they include a new flywheel too. Have we gotten even worse at throwing away stuff? machine shops can't resurface that nowdays?

[@jonvaughn7125]

Samcrac and Rich Rebuilds are one of the best duos on KZbin lol

[@tlrptg]

that release bearing looks fully extended and frozen solid. this might have prevented the clutch to engage, rendering the car undrivable.

[@hiteck007]

You could well be right actually. The slave cylinder stuck extended probably from being cooked/smoked.

[@KAZUYADOG]

And i thought it was only "step mom" that gave Sam such detailed orders such as,down a little bit,up a little bit,in a little bit more,back a little bit,shake it some more 😂

[@UFPTX]

Uncle Rich bringing it home really saved this video. He needs to give that flute player a raise.

[@windronner1]

Was that the very famous musical duo rich rebuilds and his pied piper Steeve-on with the flute?!!! Holy crap. Best music video EVER!! LoL

[@user-te1le7ck6b]

Hahahaha the rich cameos keep me coming back , legendary at this stage

[@fatmanchew909]

That's the video ending the Aston deserves. Brought tears to my eyes...oh wait that was the price of just the clutch kit.

[@hiteck007]

Their off the Planet with that price aye, even a Truck clutch isn't even half that

[@nzyama]

Uncle Richies song at the end of the episode is just the best...

[@automotiveperformancemobil4030]

This people, is a REAL video of how most transmissions come out and why it cost so damn much at a shop. This video needs to be pinned to the top of youtube servers for self transmission removals. This is the shit right here!

[@ashystyle]

Love the trolling at the end!

[@taelorwatson9822]

This Aston reminds me of your dear sainted stepmom, I hope she's doing okay.

[@wjpreslar]

I heard she was stuck head first in the dryer. Sam really should help her out.

[@actschp1]

I hope we never see her again. Not because of her, because Sam's stupid skits that would take up a full 1/3rd of his videos. And they were so freaky cringy.

[@rrracewalker]

> "...reminds me of your...stepmom" Because it takes 3 hours to "pull her transmission"? Because it takes two men to handle her torque tube?

[@vilhjalmrwt]

Nice communication in removing the transmission!!! Great video

[@schurch391]

Good effort samcrac using a regular socket on an impact drill👍🏻

[@schurch391]

@Chalmers agreed, this guy must be making a mint with all his views and he can’t but a set of impact sockets🤦

[@Coach__B]

Rich in the cameo at the end had me laughing.

[@itsverygreen532]

Just buy a 4 post lift already!

[@JayceCross23]

Thank you!!!!!!! Couldnt have been better said!

[@jayswin2]

Why? Real men work under axle stands

[@bernardquasaar1254]

watching people do this much stuff on jack stands gives me the creeps. Atleast throw some old rims under the tires for when the jackstands fail

[@JayceCross23]

@@bernardquasaar1254 yes sir even some rims or any other form of double protection. Doesnt he have a crazy rooster roaming about the place

[@JD-eo7dr]

@Yippee Skippy Forklift you have a lift you can drive about then

[@zacaea1583]

This is why Sam and Rich are the best 😂

[@UnCoolDad]

Dude, buy a 4 post lift already.

[@michaelwilkening8542]

Heck even a good two post lift would make his jobs much easier.

[@retselyarrh3895]

Since there’s no catastrophic damage I would have the fly wheel resurfaced and the clutch and pressure plate rebuilt! save some money and have a local shop rebuild them!

[@BigBSUFanatic]

That’s a Concentric Slave Cylinder! It includes the throw out bearing on it. When you ge the replacement DO NOT compress it before you install it in the car otherwise it will blow out the factory seals and you will have to buy a new one and do the job all over again! I learned that the hard way

[@extrememike]

Really love this channel! Learning and fun at the same time!

[@LMacNeill]

I would tell Rich not to quit his day job, but I'm not sure he *has* a day job... ;-)

[@blackackcl]

The Rich clutch song had me cracking up 🤣

[@emonster6x34]

He can buy a Aston-Martin but not a lift?

[@reggiehammond6508]

Good point

[@Escotch77]

He paid 2018 Honda Accord Prices though.

[@harrymcglade7422]

Sam I so love that you have kept your content real, well deserved subs, I have watched you from 100K wrecked car website evaluating, un sub scribed from Tavarish he's totally lost it after being so down to earth

[@Lance_Strongarm]

Don't get a lift, the work is a lot more relatable without one.

[@joecosta4200]

Sam garage and car lift needs to happen on the farm already.

[@michaelmaruzzelli2522]

I laughed til I cried listening to Rich butcher that song. It was so funny. I’m sure some other clutch will fit that car.

[@ZorgFS]

just hilarious - I can't stop laughing especially on the ending hymn! :))) Thanks guys!

[@mateenjan9253]

Lol I'm glad I'm not the only one that wants you to invest in a lift for above all safety reasons...

[@Droopy578]

Gotta love Uncle Rich’s cameo at the end ! 😅😅 Damn flute !!