Samsung Dishwasher Install Tips and Unboxing Close Up Views | Model # DW80R2031US

Amazon Install Kit - amzn.to/33WtExg
Home Depot Install Kit - www.homedepot....
Samsung Dishwasher Model DW80R2031US
www.homedepot....
Samsung
24 in. Top Control Dishwasher with Stainless Steel Interior Door and Plastic Tall Tub in Stainless Steel, 55 dBA

[@peterly185]

Thanks for this video! I had everything working well outside the hot water connection, and thought I didn't need any additional parts. Your video saved me from a lot of headache! Thanks again!

[@Evan-ux5ll]

Just hooked mine up in less than 30 minutes thanks to this video. Appreciate your help!

[@2BSemperGumby]

Dude 3 years later and so glad you posted this. Mine also doesn’t have that stupid connector and I thought I was losing my mind

[@PoolarityChannel]

Nice, glad it helped someone over the years!

[@PhoenixForceTravelAgency]

Thanks man. I’ve had my dishwasher sitting in my kitchen island for over a year now while I worked on other projects lol. It’s about time I get it hooked up.

[@caseykittel]

NOOOOOO! do not use teflon tape where you already have rubber gaskets and compression fittings. It WILL cause leaks.

[@chunanma7494]

​ l) ll)

[@back2roots779]

​@@caseykittelwhat in the blue hell

[@TheHoodGuru]

installed the exact same dishwasher yesterday thanks to this video. Got the same parts you showed. Great video.

[@caseykittel]

NOOOOOO! do not use teflon tape where you already have rubber gaskets and compression fittings. It WILL cause leaks.

[@caseykittel]

NOOOOOO! do not use teflon tape where you already have rubber gaskets and compression fittings. It WILL cause leaks.

[@josephrushing7929]

I agree 100%

[@efficiencygeek]

This video encouraged us to DIY install our Samsung DW80R5061US from Costco. Thanks much.

[@toyo2502]

Purchased on HD online so I havrnt seen one, jus know something will arrive in a few dates but I wasn't able to go into the store to see what I actually bought, so I needed ur video, thanks. I'm sure I can install I'm a Maintenance Director installs no prob really needed to see what u showed, thanks!

[@dennishancock1789]

Excellent video. Answered all my questions. Thank you for posting.

[@caseykittel]

NOOOOOO! do not use teflon tape where you already have rubber gaskets and compression fittings. It WILL cause leaks.

[@solluna6108]

My husband is doing it right now and I am waiting for a good outcome 🙏

[@markk.8056]

You don't sound confident?

[@andrewstephenson7100]

You didn't finish the job dude. What screws did you use? Mine didn't come with any.

[@robertbradley5855]

What is the black ring gasket with the white pole coming out in the back to the left of the water hose hook up?

[@edgastin]

Did you ever find out what that is? My dad is asking. Lol

[@theshop5331]

As others have said the Teflon tape is not needed. The “finger space” “required” is absurd. Drill your drain hose at the top of the cabinet for a neater appearance.

[@brianperkins6121]

Make sure (by adjusting the front feet) that the dishwaher is level Front to back using the botom dish rack tracks as a refrence ,, if the machine is not level front to back you "will" will likly get an error message when the machine fills as the water in the shallow sump will pool fowared or back and trigger the water level sensor into sensing the machine is flooding or having a fill issue..

[@steveashby4404]

Just a heads up all the controls are designed to be operated with the door open not fit your finger between counter and control panel Also the plastic adapter can be replace with the metal one … Samsung dishwashers have a lot more to worry about than stripping the water inlet Appliance sales 30 years

[@theshop5331]

I was kind of rolling my eyes about the finger space.

[@Madelaine10]

Hello, I would like to know if, on the other hand, mine leaks permanent water and I think it is wrong 🤦‍♀️I hope for your help, thank you

[@CDNJacobIRL]

Did you have an issue with it not drying your dishes?

[@bertadelaudebri7179]

Thanks, of great assistance in installing ours...

[@BehindTheScreenz]

Thanks brother, very helpful!

[@PoolarityChannel]

Let me know if you have any questions. If you have really really tight space in the back, like 2" or less, then you will need to cut a hole at the bottom to thread the waterline and discharge tube from the bottom. That part took me 4 hours, trying to keep the existing hole at the top, but was never able to fit the washer fully into the opening.

[@BehindTheScreenz]

@@PoolarityChannel Jeez 4 hours is a long time lol luckily I was just replacing my old unit and it already had all the holes cut out for me. I appreciate you reaching out to me, and thanks again for the video it was very helpful!

[@DarinHibbs1]

what size screws are required for side attachment to cabinets?

[@PoolarityChannel]

I used one inch drywall screws

[@FelyFelycia]

I had someone hook this up for me and im seeing the 2 hooks on top where the buttons are and I dont think that is right will it be possible to send you pics so you can tell me if this was done correctly?

[@lifeupnorth9385]

7:30 you're literally holding the instructions that tell you to replace the metal nut on the elbow with the included plastic nut. The metal nut can easily strip plastic thread on the inlet pipe.

[@emptynestgardens9057]

Came to KZbin when husband was getting all freaky cause he couldn't find parts in the box. I said it's probably inside the unit 🤦‍♀️😳 Of course I was right, he hates that 😂🤣 He wasn't gonna listen to me so I figured he'd listen to you 😁 I'll go get him a Snickers now while he watches you.

[@adam.liston]

The instructions call to use the plastic nut that came with it. Not the metal one

[@lauckstreet]

My sink is on the right, not the left. This video shows installation with the sink on the left. Are the hoses reversible to accommodate situations like mine where the sink is on the right of the opening that my dishwasher must be installed in?

[@PoolarityChannel]

See 6:30 - It will still work on the right, there is no need to reverse the loop on the left side panel, you just need to thread the hose to the bottom behind the washer, the bottom has a good 2" clearance for that purpose. There should be plenty of hose length for a normal install.

[@lauckstreet]

@@PoolarityChannel Great. Thanks.

[@drewd.8907]

Bro it’s not a strain reliever, it’s a Romex connector, which is required by code in every point of entry of a box or piece of equipment…..

[@darthlorne]

I think he’s just going off the install manual, Samsung has it listed in there as a strain relief

[@georgiannabaughn4142]

On the right side of the panel, what is the little sun over the lock mean? My dishwasher won't start and that is lit up.

[@PoolarityChannel]

That means you've locked the controls to prevent children from turning it on, you need to hold down the Heated Dry for 3 secs to unlock the Controls

[@De7eased]

Really helpful 👏

[@sharoncourt75]

hello i bougth this same diswasher use and i dint see a chord anywhere, i have a plugg in diswaher now but also had a hard wire before that one, fixing to out in a plugg

[@PoolarityChannel]

You can remove and reuse your current electrical cord, otherwise you need to buy the cord, www.homedepot.com/p/CERTIFIED-APPLIANCE-ACCESSORIES-Dishwasher-Installation-Kit-DWKIT1/307285647

[@adamjoyce1853]

Just picked up strain relief and bought 1” before realizing the hole is smaller. Went back to store and got 3/4” one. Damn almost fit. Back to store again. Guessing it needs 3/8” one. Why don’t the instructions tell you what size strain relief to get? Annoying.

[@ellab308]

Will you be ineligible for warranty if you install it yourself?

[@PoolarityChannel]

You can install it yourself without voiding the warranty. The warranty is only voided if you break the dishwasher during installation and the damage is self inflected, otherwise the equipment is still under warranty.

[@ellab308]

@@PoolarityChannel great! Thank you!

[@chefbillyx]

How has it been as a dishwasher? Any issues?

[@PoolarityChannel]

1 year later, it works perfectly. If its mostly empty, the dishwasher will be loud because the water is clanking against the plastic edges of the inside enclosure, but the way the water is sprayed is very good coverage and very intense and hard to get off the grime. Overall I like it, I have this LG in my mother's place that is super quiet, that you don't even know if its on or off, which surprisely is annoying. This one is not as loud as old ones from 15 yrs ago, but still you can make out some noise of the water, yet not as quiet as the LG. So overall I like it so far.

[@chefbillyx]

@@PoolarityChannel thank you.

[@roaneeroane3451]

I installed it but my garbage disposal is always running even when the switch is off. Has this happened to anyone else

[@meru3053]

Thank you so much

[@andrewapjohn6084]

As an appliance Installer this was painful to watch. 😂😂

[@PoolarityChannel]

Oh man, thanks for watching!

[@triptaluthra828]

How

[@CDNJacobIRL]

but you didnt show how to do the eletricaaaaallll

[@PoolarityChannel]

There's some info at 4:50

[@oscarfuertes4630]

12 min video and no mention of whether to use cold or hot. Thanks for sharing though!

[@PoolarityChannel]

Dishwasher always uses only the hot.

[@jasonsmith-pz5jq]

Get to the job