SAMSUNG DRYER THERMISTOR REPLACEMENT LESS THAN 5MINS

[@indylovelace]

I need to thank you 1000%. This saved a bunch of time and headache. Your approach worked perfectly. Super simple and the dryer was back up an running. This is the best of KZbin. Homeowner helping homeowner on DIY projects.

[@damndiddathurttv3655]

I appreciate it and I'm glade u got your dryer working

[@RafaelFGalego]

THANK YOU VERY MUCH.Excellent video.I did it! You are a very smart person.

[@cedmc6711]

Finally a smart man video!!!!!!!!!!!!

[@caylaclanton6074]

Thank you thank you thank you!!! Last time I had to pull the whole damn dryer apart!! You saved me so much time!

[@damndiddathurttv3655]

You welcome no problem

[@rileylinderman7230]

Bro you definitely deserve a subscribe, I’ve been through two dryers in the last couple months and finally got a nice Samsung one it was giving me the TE Code I was so overwhelmed watching videos on KZbin of disassembling the whole dryer your video literally made it a 15 minute job thank you so much

[@damndiddathurttv3655]

You welcome and I appreciate it I grew up always thinking about different ways to get jobs done and still do them correctly so you are definitely welcome

[@brandonlworden]

Thanks man! I watched the other videos of them taking the whole dryer apart and immediately thought there has to be someone else that didn't do all of this lol

[@damndiddathurttv3655]

Most definitely u welcome

[@mcmatt6953]

some heroes don't wear capes!!! Thanks!!!

[@damndiddathurttv3655]

U welcome

[@darjbrock]

Great video BUT you can also do it from the front by reaching over the pipe. You are working by feel, though.

[@mikekitz6914]

My man , thanks for this , f@%k all that taking all that shit apart !!! YOUR THE MAN !!!!

[@JReedTRUTH]

Love the video! But just curious, do you think the thermostat could be accessed/ replaced from the front?

[@damndiddathurttv3655]

I can't remember to be honest give it a try there's always different new ways to solving issues

[@damndiddathurttv3655]

And I appreciate it

[@thipvongsy365]

Thanks for the video! I just replaced it watching your video.

[@damndiddathurttv3655]

U welcome no problem

[@mici321]

Just wondering, did you get a code at all? I get a ‘te’. Allegedly, that means the vent is clogged but we cleaned ours out. We unplugged & replugged but no change. I’m gonna try this. I’ll let you know how it goes. Last time I took the thing apart I ended up with some leftover screws & sh… 🤔🤭

[@damndiddathurttv3655]

Know codes just was no heat but good luck it will work out and you definitely got keep up with what screw goes where especially with all that vibration you don't want it all coming apart

[@RafaelFGalego]

Thanks 1000% 👍👋

[@damndiddathurttv3655]

@@RafaelFGalego u welcome

[@ericmark47]

I tried this and the thermistor fell somewhere in the dryer and I couldn't find it. I ended up having to disassemble it and removing everything in fear of it landing inside the blower motor and it happened to land on top the the blower motor. The disassembly wasn't all that bad and I think it was better to do so in my case because the dryer was filthy and I was able to thoroughly clean it with a vacuum.

[@damndiddathurttv3655]

Dats what's up man long as u got the job completed

[@ericmark47]

@@damndiddathurttv3655 Yes sir! Also it was the fuse I took off and fumbled instead of the thermistor 😂I realized this when I received the part. Now I know why it was difficult for me to remove it and on your video you did so with ease!! 😂 I'll remember to do it right next time. Thanks for the tip!! You're a genius

[@TomBVoxman]

You're awesome, thanks for this! One youtuber said to replace the high limit thermostat while you're at it. That's the thing to the right of the fuse. Did you find that to be necessary?

[@TomBVoxman]

The cheat hole was the best tip because I'm here thinking how I can put my iPhone inside and live stream it and watch on another device. haha

[@damndiddathurttv3655]

U welcome and know I only did what was needed

[@TomBVoxman]

I replaced the thermal fuse and the thermistor and there are still no signs of life with the dryer. What’s next?

[@damndiddathurttv3655]

If it's just heat check your heat element coil I made a different video on it if it's know power at all u may need to replace your power board

[@TomBVoxman]

@@damndiddathurttv3655 no power, no lights, no nothing.

[@theonlyalexoliveira]

Bruh, I just put my whole ass dryer back together and realized this and was about to make this video. These dudes doing too much.

[@damndiddathurttv3655]

Yea u gotta work smart not hard

[@RafaelFGalego]

Thanks

[@Michiganderman71]

We are having same issues can you please tell me where you bought the thermostat part

[@damndiddathurttv3655]

Hey what's up from Amazon

[@dadthefixerflorida]

What was the reason that you changed this? I am having issues with my Samsung dryer when on sensing modes. It shuts off after a few minutes. I hav already changed out the heating element and the other two fuses with it . this was for previous issue of no heat. I’m trying to decide if this is what I need to do next. I hope this is what’s needed. Let me know your thoughts.

[@damndiddathurttv3655]

Are u sure u changed the thermostat sensor also and I changed out my parts from having no heat it powered on just fine tho

[@indylovelace]

Sounds as if he changed the heating element and not the thermal sensor…also called the thermistor. I bought the thermistor on Amazon for $13 (USD). Here: smile.amazon.com/Siwdoy-DC47-00016A-Thermostat-DC32-00007A-Thermistor/dp/B07765XD3W/ref=sr_1_9?dchild=1&keywords=Samsung+thermistor&qid=1628127023&sr=8-9

[@cantgetright742]

Some times the moisture sensor will get junk stuck in it, like hair. And when that material gets dry it'll see things as dry and finish the cycle.

[@jH-fk6pq]

That’s called the thermal cut off fuse the one next to it is the thermistor

[@damndiddathurttv3655]

I'm not sure if asking or telling me but I know which one is which that's how I was able to fix mine and help others as well

[@TomBVoxman]

I replaced the thermal fuse and the thermistor and there are still no signs of life with the dryer. What’s next?

[@damndiddathurttv3655]

So is it cutting on at all or just know heat

[@TomBVoxman]

@@damndiddathurttv3655 nothing happens when I push the power button, no power, no light.

[@indylovelace]

Here’s an attempt to return the favor. I posted a video to help save time while installing a pedestal sink here: kzbin.info/www/bejne/j5ymhqRmebdrf7s

[@Shelleyatmarshamarsh]

HC Erie code still on 🙄

[@damndiddathurttv3655]

Are u getting any heat

[@nokianx400]

too much talking for a simnle job

[@damndiddathurttv3655]

Dude if u got issue look at somebody video I didn't ask u for help

[@nokianx400]

@@damndiddathurttv3655 i am not offering help either 🤣

[@damndiddathurttv3655]

Dude kick rocks I can careless nobody ask for your opinion