Samsung Ecobubble broken leaking door | How to disassemble and repair the door | part 1: disassembly

This is model number WW90K6414QX
If you found this video helpful you might like to:
Donate: paypal.me/bootsowen
Support: / bootsowen
www.amazon.co.uk/shop/bootsowen
You can buy tools and parts, or things you were going to buy anyway from Amazon through the affiliate program (links below) and I may receive a commission for the sale. :
a new bosch washing machine: amzn.to/2F4PkhZ
Or a new filter plug (check your model!): amzn.to/3buEcXx
or you can buy anything else through the link. This has no effect on the price for you. The links used are affiliate links. As an Amazon Associate I earn from qualifying purchases.

[@nikitasgidopoulos811]

Thank you, you video was very helpful on how to separate the two parts of the door.

[@KevinsChili]

I have this washing machine and was looking to see if the clear plastic ring around the outside of the door could be removed. Lots grim and crap has found it's way inside. I found this video and it was excellent. Thank you for taking the time to make this 😊

[@DammyJoger]

Thankyou for making all the mistakes for me. 😀All the damage I would have done trying to find the screws.

[@aliskeraskerov3612]

Thank you for the video. very useful. I have a similar washing machine. Samsung upset me. You are doing great.

[@mahdiomidian1812]

Hi Engineer I'm from Iran My name is mahdi omidian Thanks for great educations I love you

[@TheInfoworks]

Owen, in my world I would tape the sensors in the door closed position. Then before refitting the door front, see if the machine starts to work. If that's the case, cut some thick perspex or aluminium and seal the hole in the glass with that. Be very useful to see if this approach works, cheers

[@gregsnider1656]

Thank you for the video. You saved me a ton of trouble. Cheers!

[@CrippleMrOnion]

Thanks for helping me avoid some of the red herrings. I’ve managed to swap this part and machine is as good as new.

[@bekolaundry1400]

great to see it getting fixed

[@abhinavrana8812]

hello! The small secondary door in my machine is stuck from one side. I see in the video that there are two locks for the small door. When I try to open the door, only the left lock comes undone, and the door remains stuck. Any ideas on how to fix it? Thanks!

[@bootsowen]

I would just leave the small door locked, it is nonsense anyway! the big door will open if the small one will!

[@NoHairMan]

That was super helpful, tyvm.

[@tashabrennan6951]

Yeah I'd say the door in door is kind of a gimmick though I do use it often so perhaps not . I'd say the intention is that when you take a load you may drop socks and small things I know I do, and you discover them after you have started the machine often ,in my case halfway up the stairs ,when you pause it I discovered that both the mini door and the large main door open this is handy for large things, I'm not sure of this is it's intended use, I've not seen the large door opening during the pause of the machine featured in the manual so perhaps not )I use the little one for socks and pants any small things though (and this is where I feel the little door could be a gimmick )the machine uses very little water so the little door isnt necessary really ,I open the large one and water never comes out it's simply doesnt fill up that much ,even when full ,the displacement doesnt make the water go higher than the seal.

[@jsherk5]

All this effort to fix an over engineered machine. Speed Queen FTW

[@manusmi9220]

Part 2 link please

[@yunalali]

thanks

[@bootsowen]

You're welcome!

[@randomirishthings1115]

Do those Samsungs have a sealed drum? I like them. Apparently they’re great cleaning machines. The door in door is a gimmick though. Wonder how many of them get scrapped because of this fault?

[@voshin]

AFAIK, Samsung uses splittable tubs only.

[@huuhoangmanh685]

@@voshin in Vietnam where is my country i'm from, over 90% front load washers (not only Samsung and LG but also Electrolux*, Panasonic, Aqua/Haier, etc) always use split tub which is nice since most people hate the anti-repair system by using sealed tub which makes the machine impossible to repair as well as you cannot replace bearing or spider, also you cannot recycle them like split tub be *talking about Electrolux in my country they still use split tub even on their newest models, unlike the European ones

[@bootsowen]

This one has a split tub.

[@omanawawi]

Hey Boot, wanna ask you when you open the frame for the main door, where you start to clip out first? Because the door sensor for addwash broke and I plan to replace myself. Cost to fix without warranty is 182.91USD and I say its a rippoff sicne the part dont even go over 13.57USD. Told me to replace the whole door

[@bootsowen]

You will have to scrutinise the video. I think there is a cover that slides off to reveal screws. I made a subsequent video of reassembly and the last part of that is probably your first step. Glad you are going to repair it.

[@yunalali]

Tha

[@PotatoMan09]

First Comment yay

[@richardbutler4488]

Samsung make you work extra hard 😓 for door the repair 🧑‍🔧 so I can see why they don’t bother doing that repair 😊 and give a new machine instead 😮 Why is it designed so complicated 😅

[@huuhoangmanh685]

it is because people want to put forgotten item to machine easier without suds/water leaking like when you open entire door. however for me addwash is still extremely pointless, thanks god i didn't buy the one with addwash door, i have used AI model 10kg for 8 months which its main door doesn't even have both addwash door and doorshield, i just don't like samsung making entry-level/mainstream ones having very light on its weight, making them more vibrations and shaking too much like mine, only 67kg of net weight

[@sharizalshamuri1302]

Thanks for the video.. I’m having the exact same issue with the add wash door and is looking for some simple fix to it… judging from your videos it’s quite a challenge .. either I attempt his or fork out for a beand new door as per samsung … the new door is about 1/4 of a new machine price 😢

[@Bluezonecentral4389]

First

[@thefoundationclan1358]

first i guess