Samsung Freestyle Projector Teardown / Disassembly

[@anizrock869]

There are 1000 and 1000 more people wanna see samsung freestyle battery module teardown and how to fix it . Hope to see this video coz it will be the first one in whole youtube history. And most search till now

[@encantodesol]

I DON'T EVEN KNOW WHY I WATCHED THIS VIDEO. I AM AN ELDERLY PERSON WHO DOES NOT NOTHING ABOUT THIS TECHNOLOGY. BUT I FOUND YOUR VIDEO SUPER ENTERTAINING. I LIKED THE FRAMED SPARE PARTS OF THE I-PHONE.

[@user400]

👍

[@trbo4dr]

At 6:54 you mention that there is a wire connected to the screw that holds the HDMI/USB-C board. Where does the other end of that connect to. Im trying to put my projector back together and cant figure out the other end. Thanks,

[@PADILLA950]

Can you do a tear down and show the barcode or qr on the projector piece? Mine burned out after 14 months 😢

[@-_o_o_-]

There is some place to improve fan performace, by adding sponge material in to a gap around the fan and between a case.

[@sebastianuk5283]

Hi there. Do you know maybe where can i get just projector lamp?

[@killactct]

I would like to charge the Samsung Freestyle projector using the pins on the underside. I am also considering designing something for this purpose. I don’t want to buy the accessory with the lamp socket from Samsung. What I would like to know is which pins are used for the power supply. Or is it as simple as connecting power, or would it require building something like a microcontroller?

[@alinoor6293]

Hey really nice video, I too have a Samsung projector that fell while it was on and now it just switch on for few seconds than goes off. Any tips thank you

[@mariazamora-qr4mg]

Mine is on for at least 3 minutes then shuts down. I do notice it does overheat

[@optimiste-x5d]

How to change the lampe of this product?

[@Bayareabosses415]

My touch panel has a scratch on lens? Howndo i fix or replace part?

[@hasmetozavci4179]

Hello Brandon Geekabit, you have made a great informative video, thank you. The operating system of this projector is not as useful as Tizen or Android system. Is it possible to change it? Thank you if you could inform us how we can install Android apps.

[@vinayakvn4754]

Great video

[@maximef1152]

I'm throwing a bottle into the sea I disassembled the freestyle as shown in the video, and I took the opportunity to change the fan because it was making too much noise for me (but it's a 3-pin instead of a 4-pin, but it doesn't matter, it just works with the + and -). When I turn on the freestyle, it shuts down after 10 seconds "system error", so I put the old fan back on, but it's still the same (the fan runs at full speed and shuts down after 10 seconds), as if it were overheating (which it isn't). I'm thinking of a temperature sensor that's buggy or something ... if anyone has any suggestions, I'd love to hear them. Thanks a lot. Sorry if the translation is bad

[@zdrz7727]

The fan might not be the issue, it might be a bad connection somwhere else, as you pointed out, maybe temperature sensor. Also, there are many of the small connectors that are pretty sensitive. I'd choose a moment when I'm calm and fully concetrated, start with a clean desk and give it another try, dissasemble again slowly, carefully, and re-check all the connections. Also, you might have fried something with replacement fan... and, of course, there's always a chance you breaking something else in the process. So, yeah, do it at your own risk, but you already know that. :) Or take it to the service and explain what you did. Good luck!

[@maximef1152]

​@@zdrz7727Thank you for your reply! Alas ... I've already disassembled / reassembled it several times, taking great care, but it's always the same result ... I still don't understand and I'm stuck. What's more, I haven't been able to locate the temperature sensor, even after searching on the internet (I don't know where it's plugged in). With no official customer service, I don't really know what to do to find a solution ... :/

[@mariazamora-qr4mg]

I’m having the same issue

[@maximef1152]

​@@mariazamora-qr4mg I've ordered a new fan (official model) in the hope that it will work ... I'll keep you posted.

[@maximef1152]

It still doesn't work ...

[@Teerexish]

Come on why don't you disassemble optics and dlp chip? Most interesting things

[@jamoin795]

I would love to get the specifications of the fan in order to swap it for a quieter one. Does anyone know or where to find the info?

[@-_o_o_-]

aub0512hb-a

[@Aser6000]

I managed to scan the data matrix code on the fan from a screenshot of this video. It's a Delta AUB0512HB. Unfortunately it's a 50mm fan which is not very common and I can't find one that exceeds the 24m³/h air flow and 6.1mmH2O static pressure of the original fan.

[@Experiemental-g8s]

Can we replace bulb ?

[@cyberspider78910]

Your video give me confidence to tear down my old phone....and things like that....

[@mariamarcheva7035]

Hello! I have this projector but sadly I lost the adapter that came with it. I tried an adapter that is 25 watts and it doesn’t work. Do I need to get a more powerful one, or the problem is elsewhere

[@andreidotnet]

The original charger is Samsung 65W PD PPS. You can also usea 45W PD PPS minimum, but you will get a message saying the charger is limited and you'll get reduced brightness and performance. The main thing in a replacement charger, is search for a compatible 65W PD PPS (or even highwer wattage, the projector will only take what it needs to run).

[@elodbirtalan4698]

Is this RGB laser diode based ?

[@adis_dizdar]

duuude thanks a lot

[@Leganoid]

Is it possible to find out the value of the capacitor? (located at the bottom left side. The farthest one, it’s the only one) kzbin.info/www/bejne/gJXSgnVtapWUgpo After the projector fell and the board hit the board, it was torn off and there is no way to find it.

[@vibha2013]

Is it dlp technology or 3 lcd technology

[@AudioDur]

Its dlp

[@BerniceGunter-sd2fv]

Hi i did everything you ask i turn on but no screen only noice

[@andrewb6554]

Does the fan speed change with temperature? if i put an additional fan on top will it reduce the noise from the main fan?

[@Teerexish]

This is a 4 pin pwm regulated fan. In theory can change speed and noise

[@nos1609]

@@Teerexish can you put its model there? Can't recognize it from the video. Thanks

[@-_o_o_-]

aub0512hb-a

[@frankterry6266]

😉 promo sm