Samsung Galaxy S22 Ultra Water Damage Data Recovery - Motherboard Repair & Microsoldering

In this video I recover data from a severely water damaged galaxy s22 ultra. I do not have many galaxy recoveries on my channel so I have a couple lined up to upload. This will show my real time techniques and thought processes when I am trying to figure out the best course of action to safely pull customer pictures, videos, contacts, and other data. In this case, I find a partially shorted vbatt line and change the OLED FPC connector. This is a demonstration, not a how-to guide.
If you have a Galaxy phone that needs data recovery, please fill out my intake form: www.iboardrepa...

[@GameChanger-sf9ds]

Thanks for sharing ur knowledge

[@iBoardRepair]

I'm glad to help

[@nazarepair]

Hello Aaron, Great Work. I want to ask, you made a backup with the smart switch to a pc right? In cases that the charging lines are really bad what case you think it woud be the best? Make a backup to other Samsung phone with smart switch like with wifi? I had a case that the phone was terrible and i was able to make it work but not charge and i did everything manually to Drive and stuff like that. I did not had another samsung to do a smart switch. I was wondering if that woud have been the best option. Cheers

[@iBoardRepair]

That may have worked, but I have never tried to do a smart switch backup over wifi.

[@i_am_ismail]

Good day aaron i trust you're doing fine I plan on taking a mobile phone repair course after graduating Seeing how knowledgeable and experienced you are in the field I'd like you to advise me on theoretical knowledge that will be helpful to me before graduating and i base in africa I'm not very confident in the mobile phone repair courses we have here so if there's any online course or if there's any other way to go around learning this skill I'd really appreciate if you can be of help to me Thanks in advance

[@brainethalyricon461]

What schematic software do you use???

[@iBoardRepair]

zxw tools

[@ruffyibraheemtemitope2538]

Thanks for the good work bruh 😎

[@iBoardRepair]

Thanks for watching!

[@Hal-Gas]

2 minutes in, just out of curiosity, do you have to move the board all the time, you turn it turn it.... git headache.

[@iBoardRepair]

It helps me think.

[@mrspinner2588]

What to do if data memory chip is damaged?

[@BucifalulR]

What fume extracor do you use :)?

[@iBoardRepair]

I've made my own. It is just an inline fan that pumps the air outside.

[@BucifalulR]

@@iBoardRepair No filters on the way? Could you tell me the fan model and what the total cost was, please? Thank you!

[@nalindisanayaka6220]

​@@iBoardRepairCan you teach us to build it ? Thank you

[@iBoardRepair]

@@nalindisanayaka6220 It is literally just an inline fan and duct that pumps air out the window. I also have a window divider thing that allows me to connect the exhaust to the window seal. The same type that come with AC's. It is very basic.

[@iBoardRepair]

@@BucifalulR No I don't have a filter because I am just pumping it completely outside.

[@umerraheeq7634]

Why you didn't jumper on missing points

[@iBoardRepair]

At which point in the video?