Samsung Galaxy Z Flip Disassembly Teardown Repair Video Review 2020

[@jd2086]

You are very gentle and careful Zach from Jerry rig always bends batteries when he pulled off... The real job is when is maded by pros like you , I 1000% trust in you for a repair

[@PBKreviews]

Thank you!

[@rudipras3355]

I think it is one of the First in the world .

[@SkanDogVids]

Glad to see Samsung actually did NOT lie im curious about that screen protector that you can get

[@ricimaru]

Спасибо, сколько смотрел разных разборок, это лучшее из всех. Максимально только важная информация, никакого флуда. Смотрел с удовольствием.

[@PBKreviews]

Thank you, glad you enjoyed it :)

[@raymondluhur]

rather than rig everything, you sir disassemble and reassemble it perfectly, much respect !

[@tealckree1240]

You can bet right this moment, every other phone companies are doing exactly what you're doing to learn and copy from Samsung's flip phone.

[@kopazwashere]

I hope they're not learning to advertise plastic screen as glass..

[@anonymoustroll1549]

@@kopazwashere maybe research more?

[@videosfodas6525]

Wow you are the first of all!!!😮

[@TeslaLiam]

now i dont need to wait until jerryrigeverything upload this vid. he is kinda lazy

[@therealreview777]

True 😂

[@ramus9]

Liam Jansson Well i will still watch Zack’s videos as i care mostly how he comments rather than what he shows in his videos.

[@manojkale4408]

Wow what engineering, kudos to you for perfect dissembling and reassembling for such delicate phone

[@PBKreviews]

Thank you :)

[@Ad-gc7th]

Hi bro. Great video, detailed 👍 How do you remove the flex cable/ribbon? Haven't seen in your video how it's removed.

[@MrMagoo-oe3he]

Bravo! OMG Best video yet - I've watched countless hours of reviews and gotta say nothing comes close to this tear down. Jerryrigeverything's vid's are basically a destroy and kill, your's is a slow death and then come back to life story. Again well done - loved watching it over and over. Rich

[@PBKreviews]

thank you!

[@mannananand5046]

Wow man! You are most definitely the first person in the world to do so! (Except for those Samsung employees)

[@PBKreviews]

Thank you, appreciate it.

[@salvo3082]

Thank you for the video! But I have to change the frame that you can see at 7:57; after I remove the old one, to put the new one, do I need an adhesive tape or does it get stuck without nothing? Thank you in advance.

[@PBKreviews]

Hi, you're welcome. Yes you would need new adhesive tape but if I am not mistaken, replacements should come with the adhesive pre installed. I could be wrong though.

[@ytkrsg]

Wow you uploaded a disassembly show much earlier than I expected

[@PBKreviews]

:)

[@ylihao]

Finally one Z Flip teardown that didn't destroy the phone

[@PBKreviews]

:)

[@samparson9604]

Wow so fast. You are king of teardowns.

[@djpianz]

There goes $1380, and thanks to you, now I know how to actually open this thing without destroying it.

[@PBKreviews]

:)

[@Exotic4M3]

*But why? Why would you do that?*

[@djpianz]

@@Exotic4M3 When I'm out of warranty, then something broken, like the battery, knowing what and where to pull/lift/undone will save me the phone.

[@Exotic4M3]

@@djpianz But if you mess up, you will end up breaking the phone.

[@djpianz]

@@Exotic4M3 Yea, well, don't mess up then...😳, but frankly, from the video above, it looks like that the repairability score is about 6/10 for me where 1 is the easiest and 10 is the most difficult one.

[@Errcyco]

This phone is miles ahead of the new Razr design wise. Not practical for 98% of us due to the price but still a step in the right direction and Sammy even spent the time and effort on the I ternals we'll (mostly) never see anyhow. Not gonna lie.. Would love to see one of these in the wild but I work around dust so I'd be scared having this expensive thing outside of my house.

[@migracing8232]

You're awesome man, concise and absolutely mesmerizing watching you careful tear this device down. Subscribed 👍

[@PBKreviews]

Thank you, appreciate it!

[@texasmade9727]

Ok I'm just gonna put it back together....👀👀....beast!!!!

[@PBKreviews]

haha :)

[@JoshOrton]

Wow very impressed with this teardown!! I was so surprised to see it turn on at the end! kinda wanted to see you bend the screen in half and see if it would break... it probably would have... but, if it didnt, that would be amazing!!! :D

[@PBKreviews]

Thanks, yea I didn't because I knew it might break, it was more firm and had less flex than the razr screen I tried to bend on our teardown since the z flip uses a bendable glass screen compared to the plastic screen of the razr.

[@omarladjal2867]

such an underrated channel . nice work

[@PBKreviews]

Thanks, appreciate it!

[@easytube5817]

Congratulations. Your are first youtube to make teardown video of galaxy z-flip

[@PBKreviews]

Thank you

[@vitonice]

so fast. You are king of teardown

[@TechMDYoutube]

I’m still trying to get this phone 😭

[@amanwithoutidentity2466]

💔🌚 I'm As well

[@PSYCHOV3N0M]

I'm looking to import the Gold Z Flip (for my Mom) from Israel for usage in the U.S. Max Weinbach confirmed on Twitter that it'll work on U.S. carriers' LTE bands.

[@malikskrijelj1158]

Nick where

[@AmalDevYT]

Your channel rocks, fastest teardown video

[@PBKreviews]

Thank you!

[@NanoMine]

Compared to razor phone this is so much more simpler yet so well engineered phone from inside. Even screen replacement seems very easy.

[@keyboard-commentator]

yeah seriously, i wonder if the screen can be replaced without removing the back glass? hard to tell since he removed everything before the screen came out

[@PBKreviews]

no because you still need to disconnect the cable that is attached to the main board. So you would need to take at least the bottom portion glass off to disconnect the battery cable, remove the speaker assembly and then disconnect the screen cable.

[@keyboard-commentator]

@@PBKreviews still though looks like it's not gonna be super difficult to do the repair right? Which screen go you think is easier/faster to replace?

[@PBKreviews]

Yea wont be easy at all. Probably the Razr, because of the fact the outer boarder that covers the Z flip screen is flimsy and hard to adhere back to the frame with adhesive so without actual pre-cut adhesive that is made for the phone, would be hard to put it back on.

[@keyboard-commentator]

@@PBKreviews did you mean won't be easy or won't be difficult?

[@sporterhome]

I damaged the screen when I took apart my Flip to get dust out of the hinges. Do you know if there is an online source to buy just the screen? I also need the small screen on the cover if you know a source for that as well. Great video. Thanks!

[@PBKreviews]

Hi, on ebay you can search for galaxy z flip lcd and you will see some listings for the outer screen and I saw some for the inner but the inner screen seems to be very pricey. You can contact samsung for a repair should probably run much cheaper for the inner screen.

[@sporterhome]

@@PBKreviews Thanks for the quick response. I'll check it out

[@PBKreviews]

@@sporterhome no problem

[@hy-sp2kt]

9:36 This is not a film at all, UTG is a very interesting material. 😳 nice job PBKreviews 👍👍

[@PBKreviews]

Thank you!

[@apachehelocopto1779]

Just got recommend and im a fan of teardowns and the video

[@PBKreviews]

thank you

[@coconutwater-connoisseur1897]

If I was to replace the back glass only, can the outside screen be removed and transferred to the new back glass? Thanks :)

[@PBKreviews]

Yes, it's held on with adhesive, you would need to use a hair dryer or heat gun to heat up the glass to make it easier to pry the screen off of it.

[@coconutwater-connoisseur1897]

@@PBKreviews thank you :D

[@BrawndoQC]

This is ASMR. You deserve more subs. Maybe work on the narrative/voice tone for more subs. Personally I love it the way it is right now but you know how youtube works.

[@PBKreviews]

Thank you, appreciate it. Will work on it :)

[@folduniverse]

Nice! Is it possible to teardown the hinge and see it's inner mechanism?

[@PBKreviews]

It would be possible, the screws can be removed and taken apart, but I didn't want to pull the hinge apart into pieces because most likely will not operate the same when put back together and I am planning on using the phone for a bit so yep :)

[@alsmalandog5889]

Do I need to apply a new adhesive on the new screen?

[@PBKreviews]

If it doesn't come pre installed, yes.

[@jesserios28]

Will this work using a z flip 5g part for non Z Flip 5g phone ? Regular Z Flip

[@djdil619]

Definitely video gona change your life.

[@glpzdmd9259]

Its basically the same model with Z Flip 5g right? Thank you godbless

[@PBKreviews]

design wise its pretty much the same

[@glpzdmd9259]

I can use the z flip 1 screen transfer it to the 5g model right? I tried looking for a screen replacement online and it says for both models..

[@glpzdmd9259]

Did you heat the plastic frame before removing it? Also the screen?

[@PBKreviews]

hi, yes.

[@Mr2pint]

Nice work and impressive first attempt for Samsung

[@PBKreviews]

Thank you :)

[@Marinescu87Dan]

Your video deserves more views !

[@PBKreviews]

Thank you

[@illusini7185]

hello,I'm your chinese fans and I like your video very much. may I share your video on Chinese bilibili?

[@PBKreviews]

Yes, Thank you :)

[@901Babyboy]

Nice work bro👍🏾👍🏾👍🏾 now that's how it's done

[@PBKreviews]

Thanks!

[@boujemaadv5899]

Woow you are mezzanine this phone is beautiful

[@meisterrodgers3181]

Nice video. Proper teardown. Love my Z Flip.

[@frizzybizzy4881]

How do you apply heat for taking off the plates and other things bonded with adhesive.

[@PBKreviews]

I prefer to use a hair dryer, it provides even distribution of heat and less likely to damage anything. Just move it around until its hot enough to the touch and you can always apply more heat as needed.

[@frizzybizzy4881]

@@PBKreviews Thank you so much, I'm fixing my moms phone because there are some pictures there we need to retrieve. She will be very happy! 🙏🙏🙏

[@LauS0]

The back covers look easy to replace but the tiny screen seems glued to the cover, I wonder if you can remove it without destroying it

[@PBKreviews]

Yea, it's held on with adhesive, so heating it up and gently prying it off would separate the screen from the glass

[@dallashickman8374]

Very useful video thank you!!

[@PBKreviews]

You're welcome :)

[@evanvanhaaften9947]

How do I go about replacing just the top back half of the z flip? I want to keep the wee screen also.

[@coconutwater-connoisseur1897]

You will have to buy the top glass with the small screen unfortunately. I tried to transfer the small display using heat and careful prying but one of the layers of the display is completely adhered to the glass which makes it impossible to remove. Ended up not working anymore and had to buy a new glass with the small screen :(

[@harrasika]

Does your version also scratch with a fingernail with deeper grooves at a level 3

[@PBKreviews]

nope

[@charlielainez1148]

You're a good channel dude. Keep it up

[@PBKreviews]

thank you

[@QiqiSuki]

Hey sir! Can you please comfirm that the screen is glass or plastic? I would to hear your answer 😁

[@PBKreviews]

Hi, check out the video I did on the screen

[@glpzdmd9259]

I want to say thanks for all the guidance. My friend, now i replaced the NFC panel but still wont charge normally. Pls be patient im going crazy what happened on this phone The screen and all other functions is normal apart from it not charging.. 😭

[@PBKreviews]

hmm might be an issue with the sub board, not sure.

[@glpzdmd9259]

Already changed that too.. 😔 could it be the cables that join the top and bottom half?

[@glpzdmd9259]

Or is it also possible that the batteries need to be changed? Thank u soooo much. God bless u

[@thirstydrifter]

hi would like to ask in this phone where is the internal storage memory located? or is inside the mainboard? thank you

[@PBKreviews]

Hi, Its soldered to the motherboard and is not user replaceable.

[@Jorge-we9se]

What kind of glue do you use to attach the back of the phone?.

[@PBKreviews]

This video I made will help explain: kzbin.info/www/bejne/imXMmoOLfrJqY7s

[@elizabethcral7119]

Saben si estás baterías son iguales al z Flip 3 ??

[@csicsi7099]

How did u get it so fastly??awesome

[@PBKreviews]

Thank you :)

[@syedzaryabhassanzaidi2231]

Your content is Very Good!! Love it ♥️ Video production needs some improvements ❣️ GOODLUCK!!

[@PBKreviews]

Thank you, will work on it

[@illlsmith]

Is the 5g motherboard interchangeable between phones

[@PBKreviews]

You can take the motherboard and place it in another Z flip same year model, yes. But not on a different model phone.

[@Xenovita88]

Wah mboheman kang

[@susritjungbasnet]

Jerry rig everything is wants to know your location

[@PBKreviews]

:) he already knows

[@HarnaiDigital]

Your grammer Is Weak

[@mediatech1588]

I want to known your location to teach you grammars.

[@loshistudios2446]

@@mediatech1588 "Grammars" ? Apparently yours is even worse lol.

[@mediatech1588]

@@loshistudios2446 😅.

[@grape1829]

Apparently, the UTG manufacturer in Korea (they call it UFG because they purposely made the glass thicker than UTG for durability) can still only churn out 100k units a month. So we can probably expect the phones to sell out over and over for a while.

[@efechief2659]

That is one of the reasons amongst a few a rep from the company said it will be three years until other manufacturers can catch up to them. Huawei are pros at stealing technology, but there is nothing here other manufacturers can't do except UTG. I'm curious to see if the three years holds up. Until then Mate X, Moto Z and possibly the Surface phone are all dead.

[@markjotep]

You had the best opportunity to show the nylon fibers protecting the hinge from dust.....

[@PBKreviews]

I assumed the black film like tape I peeled off to be what they intended to protect the hinge from dust, I didn't really see anything else sticking out to me aside from that at the time and did not want to take the hinge apart in pieces to confirm if there was anything else aside from that because I am using the phone currently and wanted to be able to use it for a while and did not want to risk damaging the operation of the hinge.

[@HarnaiDigital]

Nice Effort But No One Can Take Place Of Mr.Jerryrigeverything. I Appreciate Your Efforts.

[@CrwnTheAlmighty]

I got mine yesterday morning and love it. They've sold out haven't thwyb

[@tealckree1240]

iCrwn how is the battery?

[@PBKreviews]

not sure if they have sold out but I herd they were running low on stock in the US

[@CrwnTheAlmighty]

@@PBKreviews I think I saw only ATT ones left! I'm sure by now they're gone. Pretty wild i didn't think they'd sell that fast

[@CrwnTheAlmighty]

@@tealckree1240 Battery is not bad rbh. I find myself plugging my phone in at the end of the day. I feel even tho it's only 3300, when folded it takes almost no battery. After 2 full days of use im extremely impressed

[@TheDynamo808]

I'm so jealous.

[@daeseongkim8528]

Interesting. Good job.

[@PBKreviews]

Thank you

[@Lvlaple4Ever]

Much better designed externally and internally than the Razr.

[@PBKreviews]

Maybe, but the peel off bezel on the outside of the screen seems very cheap and I feel it would easily peel off over time. I also prefer the razr look compared to this, however this phones design internally for being able to replace parts as well as the specs are better. If only they actually put a larger display on the outside, not sure why they went for such a small one, they could have easily put a larger screen.

[@ezscootrr]

@@PBKreviews version 2

[@waddefaq4325]

@@PBKreviews maybe the idea of secondary display outside they saving for galaxy fold 2. Its marketing strategy. If they make 1 perfect phone, then people will not buy other series. So they purposely make every single model series have different advantages and disadvantages.

[@PBKreviews]

@@waddefaq4325 Ya that's true.

[@Nitstalkr1]

Muy buen video, solamente que me preguntaba ¿Dónde se encuentra el procesador, la RAM y el almacenamiento interno?. (soy estudiante) Very good video, but i have a question, where is the processor, the RAM and the main storage?. (I am a student) Edit: I forgot the question mark XD

[@PBKreviews]

Hi, if you scroll down to step 7 in the ifixit teardown, they go into detail about all the chips etc. Here is the link: www.ifixit.com/Teardown/Samsung+Galaxy+Z+Flip+Teardown/131002

[@glpzdmd9259]

Can the plastic borders on screen be reused?

[@PBKreviews]

They can, but you would need to cut your own adhesive strips to use to re adhere those back on since they don't sell adhesive for that.

[@glpzdmd9259]

@@PBKreviews thank u so much. Im praying i wont damage the screen of my z flip 1 which i will transfer on a z flip 5g (broken screen)

[@vitonice]

best teardown , not teardown to kill phone.

[@PBKreviews]

Thanks :)

[@peachyfresh1078]

how did you replace the plastic border on the screen?

[@PBKreviews]

Hi, what do you mean? how did I re apply it? you can use some adhesive tape and cut it down to size to apply around the border. Here is a video explaining a bit about adhesive: kzbin.info/www/bejne/imXMmoOLfrJqY7s

[@peace4myheart]

So cool. I want one but I'm too poor. Maybe in a couple of years when it's around $400

[@beboH4o]

after few years they wont sell it and it will be only used and if its used the battery will be already trash ...

[@kopazwashere]

couple years of later there will be phones with glass screen and you wont have to dump money into a samshit phone

[@beboH4o]

@@C20F with other big prises

[@beboH4o]

@@C20F i better buy chinese top spec phone for 300usd every year then overpriced samsung

[@TommyNowDoesGaming]

Deyan Dimitrov You can buy a Chinese top spec phone along with Xi Jinping sending you ads for Booking.com

[@Mrvikhan]

Thaks for help man! Subscribed!

[@adityaSingh-gk1kw]

dont try this at home

[@clutchboy90]

You first teardown the galaxy z flip. It is before ifixit and jerry rig everything

[@PBKreviews]

:)

[@ramayyavastavayya]

Amazing skills

[@PBKreviews]

Thanks

[@gtrzdaddy]

this guy is way more skilled than the jerryrig everything nonsense.

[@MrMobssss]

Kind of wanted to see these brushes in the hinge they were talking about

[@PBKreviews]

check out the second video I uploaded, I go more in depth with the hinge and screen

[@ahmedalialmahdimohammed3539]

شكرا لمعلوماتك صديقي

[@GBabuu]

my z flip 5G has water damage and two numbers that need for pin passwrod for the lock screen don't work, I'm so scared to go through this process

[@PBKreviews]

It's definitely not the easiest phone to take apart but yep it would need to be taken apart to dry out any water inside and brush off any corrosion around chips or connectors causing the parts to short and not work properly.

[@billcraw9047]

Teardown the s20 ultra 👌🏻

[@PSYCHOV3N0M]

I'm looking to import the Gold Z Flip (for my Mom) from Israel for usage in the U.S. Max Weinbach confirmed on Twitter that it'll work on U.S. carriers' LTE bands.

[@nazrikhrdn]

KZbin recommend this But okey Thanks KZbin

[@idahomaine9490]

The dual battery will stick around

[@rajlovinglife]

10:36 we have all come for this...the hinge mechanism.....right guys.......

[@PBKreviews]

Uploaded a second video showing a more close up of the hinge

[@vitonice]

the fastest is the king

[@t19563]

I wonder who got this phone and got it rekt in 2-3 days and came here for fixing it.

[@PBKreviews]

lol most people look at the teardowns in the first few days to see the build quality and construction of the phone to see how hard it is to repair if broken or if its a sturdy phone etc. before they decide to purchase the phone. But later on down the line people use the teardown videos to see how to take it apart to fix their phones.

[@edsscribble662]

i know everyone still waits for zack of jerryrigeverything to break that thing into parts hahahhaa

[@SunnyCee_Events]

Nice job man!

[@PBKreviews]

Thanks!

[@tm3kim95]

Cuttting the cord with no doubt, wow.

[@X82oo781]

It was adhesive you idiot

[@mudassiransari4170]

Good content

[@PBKreviews]

Thanks!

[@bivol5628]

Nice 👍 video

[@PBKreviews]

Thanks!

[@RyanPenner]

Very well done!

[@PBKreviews]

Thank you

[@hertz11]

PLEASE get a better lighting, content is GOOD

[@PBKreviews]

will do, thanks

[@vitonice]

JUST FOLLOW REVERSE VIDEO TO MAKE PHONE BACK.

[@androsmilenionful]

How about screen scratch test?

[@janisskrastins477]

Thanks for Great work

[@PBKreviews]

Thank you, your welcome

[@glpzdmd9259]

Hello pleas emake a video about samsung z flip, too cold to use flash, or too cold to charge. It has the yellow triangle and wont charge as normal

[@PBKreviews]

You might need to replace the charger port/sub board or battery

[@glpzdmd9259]

Wow thank u, this saved me time to search for shops to repair or possible solutions. Im goung to buy now that sub board/charger port

[@glpzdmd9259]

I already changed the charging board/sub board.. but still with yellow triangle. What could i be missing my friend? Do i need to replace wireless charging panel/part?

[@jorgerodriguezguevara2668]

Podría brindarme ayuda. Ya que mi sansung z flip cuando lo cierro se me apaga. Su pantalla trabaja 100% bien abierto.

[@PBKreviews]

Hi, can you explain a bit more in detail what you mean. When you close it, what turns off and what doesn't work?

[@Fabbio-g5i]

After replacing my screen i cannot power on the smartphone unless it is connected to the charger, and even if it is connected to it the battery does not go up it remains stuck to 30% more ore less

[@luciferx1636]

good job

[@PBKreviews]

Thanks