Samsung stove NE59J7630SG display flickering repair fix replacement

[@user-cj4hk8lr1v]

Thank you young man , for teaching us adult how to fix a flickering stove display!! Great job. Very refreshing to see a dad and his son working together.

[@LeonThomasian]

I came to see how to repair my flickering display but stayed for this amazing collaboration between a dad and son 💙

[@sheliablake4816]

Thank you for sharing this collaboration. My stove has been flickering for 2 years it’s only 4 years old.

[@mikemcgeary2638]

I have the same thing. NEVER repurchase a Samsung. Mine is. 5 years old. Extended warranty just ended. I was told by an repair man to never use the self cleaning part because it heats up too hot and can ruin circuit board.

[@misterbigglesworth6852]

Nice job. Hey Samsung. This video has been watched 33k times. Do you want to know why? You sell faulty equipment. My stove required a new pannel in less than 4 years.

[@slvrktman7824]

Samsung is building a reputation…too bad it’s a “do not purchase our crap reputation”!

[@StannisBaratheonOTK]

Purchased a full suite of Samsung kitchen appliances. Never again. Stove - this issue Refrigerator - infamous ice clogging issue Microwave - clock loses two minutes a week, peeling at edges Dishwasher - blades break, occasionally faulty moisture leak detection so it won't run for a few days

[@mekamiya]

Thank you so much - I googled previously and I found I had to replace to the board for over $400- so glad I found this video! I’m glad I watched the whole thing though because I didn’t realize I had to unconnected some wires before taking off the board. I got to see it go back together though and that’s the important part. Much appreciated!

[@rodsguerreirodefaria]

Thanks Man, had my bloody screen flickering for over two years and even tried replacing the board once last year but it didn’t work. Your instructions were spot on, just did it with the wife while following your video and it’s fixed. Thank you so much man, great job with the boy as well. Much appreciated!

[@badbro2820]

Thanks you guys! I have to make this repair today. I commend the instructor for letting Alex replace the part and get a sense of success and accomplishment from the task completion! That is what our world is missing these days. Kudos to you both gents! 🙏🏾😃👍

[@LSinclair]

What a kind and respectful Dad! And so good of you to teach your son, who sounds delightful too. Thanks for this best vid on the topic I’ve seen today❤

[@JoshMiller2020]

Thank you. I will be fixing this problem after seeing your video. I think it’s great having your son help with the job, very well done and thanks again.

[@susancox1071]

Thanks for the explanation and video. It looks like a repair that we can do ourselves. Great job Alex and Alex’s dad! Update on our installation of a replacement digital clock. Our son helped us with the installation and found it more difficult than we expected to unplug the cable on the back of the broken clock when removing it Also, 2 of the black plastic hooks that held the old clock in broke off. We used electrical tape to securely put the new clock in and everything is working well.

[@paulh3126]

I had the same exact experience. Managed to break a clip and had to tape it back on.

[@caleb310]

Here to fix my flickering stove. Connecting with this video because a dad and son are making memories. Worked like a charm on my flickering display. Thank you!

[@deaconalrosker7552]

Thank you!!! You saved me lots of money! I really appreciate watching the father-son bonding, but when you walked him through the process, it really made it easy for me to follow as well!! Thank you!!

[@aprilealparone4720]

Thanks so much! I love that you and your son are working together and he is learning. I ordered our part and we are crossing our fingers that it works.🤪 no more disco lights.

[@Tonyplat98]

Did the part fix it? I'm having flickering lights on the oven now

[@3pointmt]

Cool Mine is doing the same thing. Thank you for the video. I also think it’s very very cool that you’re letting your son do it. Teaching kids how to work on stuff is a lost art. Thank you again

[@paramkollepara3235]

Thanks so much. This is very helpful and nice to see a dad teaching his kid. Kudos to both of you.

[@claudiaspiegelberg4898]

Thank you for your video. 2 ladies changed this part today, just following your instructions🔝🙏 Got the display from Amazon for $92,50 and replaced it👍

[@hitandrepair]

Good job!

[@srfpunk8207]

Awesome experience and teaching moment with your boy! Wish you tested it and showed the display working and seeing your boys reaction to it though. Thanks again.

[@nobodyshome8726]

Sounds like samsung has an ongoing issue with this model stove..mine is doing the same exact thing that a lot of folks commenting have had issues with..thanks for the wonderful team work you both did...guess theirs no such thing as a lonely samsung repair man...for those that can't repair their own things..

[@johnmcmillan386]

Thanks for you video. Our stove has been flashing for a long time. Hasn't affected the operation but is annoying to see it flashing all the time. I have the same model as yours. Very cool you did the video with you son!!! I have the part on order, so hopfully ours will be like new again as well.

[@brianbaker359]

Ours is flickering as well but I can live with that although I am wondering whether the flickering is a precursor to a complete failure meaning the stove would not be usable. Has anyone waited until it fails? Secondly, what kind of assurances does anyone have that the replacement display doesn’t start flickering a year or two after installation as they are likely all from the same manufacturer.

[@leannemariestewart4703]

​@@brianbaker359same

[@miriammarcello7453]

I have the same model and just after the warranty expired, mine started flickering. It’s been like that for several years. Now that I watched this video, I feel like it’s time to change it. Thanks for sharing.

[@timt8199]

Thanks for this video. Had a flickering diisplay after a power outage. This part fixed the issue and now able to use the stove again.

[@jayx.6813]

Nice to see you guys working together. Makes KZbin even better. Thanks for your help.

[@Wilki808]

I have this problem on my Damnsung stove. This was very helpful. I love that you had Alex fix it!

[@hitandrepair]

A customers/friends kid who so badly wanted I volver and his mother didn’t think I would allow it. I loved that he had interests and wanted to show him how and have him show the world how simple some things are, he probably has this part on a shelf still today.

[@JSins_]

damnsung, lol

[@jmontigny7367]

Damnsung - love this!! Thank you for the giggle.

[@JordanPritchettMusic]

Just fixed mine with your help! Thanks!

[@GeorgeDAlessandro]

I actually installed the part with my son. Thank you for a great video

[@gildaward9048]

You might want to use a grounded wrist strap, ESD can erase a linear chip just like that, but all-in-all a very good job.

[@robertamaral907]

That was very helpful, thanks to you and that young man.

[@jeandeaux2129]

Great posting, dad---very informative! You & Jr are an amazing duo!

[@JesseLewisACTOR]

Thank you for this!!! @Samsung should put your video on their website since they have no help via the toll free #

[@hitandrepair]

That would take business away from them! Lol

[@blujawsiii6884]

This will be the second time around I am replacing the display board on our Samsung oven. Thank you for your video. It helped me the first time replacing. I will not go with Samsung appliances again. I am not impressed with them at all.

[@Xanderful209]

This is happening to my stove too 😔 a new stove isn’t in my budget so hopefully I can fix it thank you

[@MelodyKing-qy7yk]

Mine just started flickering. Thank you for this video

[@rickfanciullacci6052]

Great video! Thank you for posting this very helpful instruction to fix this issue..

[@BitSmythe]

0:12 The same model number's also the top, giant text. So much easier to find and read!

[@jimbeama]

Thanks for this. It helped me to diagnose and repair this problem. Amazingly simple to do.

[@neilfitch]

Great video. I had the same issue. I did many projects with my Dad and as a result rarely call a repairmen or hire contractors. I noticed that you didn't take off the protective film on the LED before install, probably will make little to no difference in the display.

[@hitandrepair]

You are right, Just a clear film. This was the friends kid, believe he’s on the spectrum. I wanted to include him since it showed others that a child can do it, they could too and he asked before my arrival if he could be on KZbin. 7 months later, over 10k views, he’s done more than what he realizes.

[@Canadiana71]

Thank you! My stove has been doing this for over a year! The self-cleaning feature will not work because of this!

[@MEADOWLAND34]

Cheers

[@SteveJones-qi5hn]

Thanks. Very helpful. A little more detail about removing the cable connectors would have helped, but no big deal. As someone else mentioned, no more disco lights.

[@nloureiro]

The trick the pulling the cable from the LED display is that the tab on the bottom side of the cable needs to be pushed up, not down. This caused me a few minute delay. Hope this helps someone

[@bklein98]

Great job dad and son!

[@mpeterson7406]

All of my Samsung appliances are junk

[@slvrktman7824]

Bingo!

[@Toot-xl6qt]

I told my girlfriend I hated Samsung before we bought a house. We’ve been here 2 weeks and I’m here watching this video. I’m replacing all the appliances within 2 years. Even if they’re working, I’m a man of principles.

[@roba7737]

Yes they are junk. I have a stove and fridge and they are both nothing but problems. Garbage.

[@pmcollett]

Amen to that. My are also terrible. My dishwasher is the worst.

[@Island360]

Yep! Just replaced a fridge and now doing this repair on the stove

[@debrawenzel4584]

I love your son is helping.

[@jalphabet5]

Thanks for this tutorial! Seems to be a common problem with this model. Is it still working ok? Asking, because it seems that a lot of aftermarket parts don't seem to hold up as well.

[@shakadougcorbin8939]

Nice video but you cut out the part where you disconnect the two connectors. Would have been helpful to see the original issue too. Thanks though. Still a big help.

[@stokedonearth5097]

Ya know my parents 20 year old GE oven display is still working till this day and my fancy Samsung didn't last a year before the display broke haha. Thanks for the video! Hopefully if I complain kindly they'll warranty it.

[@hitandrepair]

Doubt it, good luck

[@JontyChandrasena]

Damnsung sucks

[@loveyf853]

Service call was 240.00 .. I would of called ur son!! Good job buddy

[@ginettedaigle9094]

Thank you so much. Great help for us. From canada. Tks.

[@kaybonette]

Our Samsung stove display works but some places in the numbers are black but we can still read it. Does this mean it is going out or perhaps a dirty connection? Thanks for a great tutorial and seeing your son be involved.

[@junusavior65]

Alright storytime. We had a little moth get stuck between the clear plastic and the light up display that you replaced here. I, being the genius that I am, decided to kill it by squishing it. So after that I had a smeared dusty moth covering up part of our display. Thank you for showing me how to get behind it!

[@trevorm1970]

Great video but did I miss the part where you plugged it back on and showed the display working?

[@aprilrobertson8081]

I wish you had show the flickering before fixing. Mine is doing something and I am not sure if it's what yours was doing. It's a Samsung and on the display you can see really light background lights flickering, like the time and everything I am using looks normal, but in the background you can see flickering other symbols that aren't being in use. Is this what yours was doing? My stove looks like your exact model. Is it the same situation??? Thanks!

[@PlatonicPurplePanda]

Did you find a solution or did doing the same thing as this video helped? Our's is the exact same issue as yours and seems like it's a common issue going around when I was looking at the Samsung community board site, the mods just tell you to PM them your model and stuff for help. But seems the consensus is to buy the range part that cost around 100 dollars to solve the problem.

[@aprilrobertson8081]

@@PlatonicPurplePanda I haven't tried it yet, seems like a lot of work lol. Not really, but just haven't got to it, seems everything is going out, light fixture went out, dryer went out, fixed those haven't got to the stove. I hate to just buy a new one, it's not even that old, a year? 2 Max? Shouldn't be faulty already ugh....

[@joey78221]

if we pull it out and need it to work to cook for turkey day are we screwed?

[@pradeeps95]

Thanks so much for posting this.

[@astrobinge]

Hi, when this happened did you experience your bottom right element to turn on/off when you turned the knob? My stove currently has the LCD issue and the bottom right element goes on/off and I feel as if the oven is doing the same. Thanks, J

[@kirkmarino5258]

Great video. I like how you took the time to teach your child. Question. My display is flickering around the edges. The main part "numbers and clock" are fine. Should I be replacing the display unit of wait until the entire thing starts to flicker?

[@hberrysc3517]

I have the same thing. The clock is steady, but the background stuff is lighting up and flickering faintly.

[@reggieslay3593]

Same here. The Digital clock is steady, but everything else is flickering .

[@rudychavira5558]

I have some flickering lights you can barely see, I think I need this part where do you get this part and name?

[@kazconrad5886]

Is this something that we HAVE to fix? Our display is doing the flickering too but it’s barely noticeable….can I just leave it?

[@walterdavis8085]

Does the display screen make the oven works. My top works but display screen and oven doesn’t.

[@pointnIaugh]

Where do you get the part? I have the same oven, and same problem.

[@nancykoreen7393]

What is the name of the part you replce it. I have the same problem with my samsang stove display. From where I can buy it. Amazon?

[@lindaj2913]

Ours went out completely. Is it the same part you think ??

[@hitandrepair]

Yes

[@Daveyk021]

I wish you would have showed the failure. I have the same stove (no problems yet). I wish their clocks had a battery backup. Mine is always flashing 12:00 - lol. Did you take the old LED display apart and see if you could see what was wrong with it?

[@hitandrepair]

It was hard potted, they had just new floor installed in kitchen so I didn’t want to move the stove or wait for it to be done. It would have added detail to video but they themselves will know when it happens

[@Daveyk021]

@@hitandrepair So, you said that the LEDs where flashing? Something to look forward to on mine, I guess - lol

[@Daveyk021]

@@hitandrepair BTW, I'll need the kid to show up to fix mine - lol.

[@hitandrepair]

Lol I’ll send his mom the note lol, yeah they flash. Display is 97 bucks!

[@brianbaker359]

@@hitandrepairHow long has the replacement digital display lasted? Concerned buying one from the same batch of lemons as the original one.

[@pollorodriguez9673]

Where you buy the part?

[@markgyger4859]

Great job guys,

[@evgaming9390]

I have the same stove and the motherboard connection started sparking (Black smoke) what model is it to replace the motherboard

[@shawntandy4326]

thanks great video!

[@RukiDance]

Awesome workin w your child!

[@mizzritz007]

I had mine replaced last year under warranty by the company cz it was flickering also. But now features are starting to slowly show up like it did when it started to mess up before......like the F° symbol shows slightly all the time now...🙄 other than that, we haven't had any other issues with our stove or fridge. This is frustrating tho! Cz we want an over the range microwave but don't know if we should change brands or stay with samsung...

[@charlieerickson8149]

Is that a JIS screwdriver?

[@fredreim4082]

These Samsung stoves are a piece of junk. I have read of so many similar problems on the internet with this display. I called Samsung about this and they sent me an email where I could get this part for about $100. There should be a recall on these stoves. My stove is just over one year old. Will not buy Samsung products again!

[@PlatonicPurplePanda]

Same issue for out damnsung stove too, all the buttons flickering even when they are not turned on, will any problems accrue if you don't fix it?

[@hitandrepair]

I wouldnt leave it faulty like this. That’s for sure

[@brianbaker359]

The obvious question is whether buying and installing a replacement digital display won’t malfunction similar to the one that came originally in the new stove.

[@VGMARMS]

Hello, I have this same issue and will be fixing it soon. Is it safe to leave the stove plugged in if the display is flickering like that?

[@hitandrepair]

Yes it’s fine

[@VGMARMS]

@@hitandrepair OK, thank you!

[@snat6299]

Thank you

[@brianallwine2919]

I had this replaced about 1 year after purchasing this stove. It was covered under warranty. It is now doing it again several years later. No warranty this time. Samsung appliances are absolute junk. Also have a Samsung double door fridge with sliding drawer freezer. It builds up frost and is freezing the tracks to the point that the ball bearings are breaking. I will never buy anything Samsung again.

[@grapeape3633]

I have this stove. The construction seems pretty solid, but I'm on to my 3rd repair on this 4 year old stove. The control panel led just started flickering, so that needed to be replaced. 2 burners have bad sensors so the hot burner light stays on, the only way to repair this is to buy new burners. $100 or so each. I'm on to $300 repair for a 4 year old stove. That's ridiculous.

[@o4u2sweat]

It would have been nice to see it broken and if the replace actually worked.

[@paulajohnson5562]

My display part wouldn't budge Hiw do I get it out!! Help!!!

[@banjokazui4225]

Thanks!

[@kirbonite]

I have this same model.. I had some issues with the breakers and after the electrician did a diagnostic.. the display is flickering in the background. I can't seem to turn the demo on and off.. If I'm confident this will fix my problem.. I'm on board.. can anyone advise me ? thx.. Kirby

[@coreypitt8240]

Would have been helpful to see the display once it was replaced.

[@pepdizzle4367]

What about when the display is not working at all, stovetop is and oven is not?

[@christopherkerhin1438]

Mine looks to be sodered onto the main board. Doesn't click out.

[@rudychavira5558]

Samsung really has to step up their crap breaks down my dish washer fridge, and now stove.

[@dandiller6369]

I replaced the digital readout and now I have C-F2 CODE

[@alderose7429]

Be careful metal parts are sharp

[@40blockstudios60]

U missed showing unhooking the display

[@hitandrepair]

@@40blockstudios60 do you need help with that?

[@alexleroy6640]

IT SHOULD TELL THE BOY TO DISCONNECT THE POWER SUPPLY FIRST. THIS IS 240V . THIS IS NO JOKE

[@hitandrepair]

The stove was in the living room. Calm down.

[@welekaweleka8404]

I didn't see it broken or fixed

[@filosofocrates13]

The part is expensive as hell. ☠️

[@scotthutchinson5874]

Thanks!

[@hitandrepair]

Thank you! You are the first in 11.5 million people to ever do this

[@scotthutchinson5874]

No way! Can’t believe that.