✨ SAMSUNG WASHER DRAIN PUMP - EASILY FIXED ✨

[@Beatitude_Dude]

This video worked perfectly for me. I am not a DIY guy, but this was relatively easy to follow - even for me. My dryer isn't stacked on my washer, but this way to changing out the drain pump was way easier than another video I watched that had me taking off the top, the front, and the hoses just to get to the pump! This way, I just had to tip it back, take off the small cover, and remove a few screws to get to it. Thank you very much!

[@QuickAndEasy5MinuteAppliance]

Nice job, I’m so happy it worked 😊

[@mrmoll2]

Such a great help! Much quicker and easier way to access and replace the pump motor assembly. Every other video online has you go through a much more exhausting disassembly process. Thank you for posting.

[@QuickAndEasy5MinuteAppliance]

You are very welcome 😊👍

[@uberhorsey]

Thank you so much! I was able to get my Samsung Front Load Washer fixed by following your video! I was intimidated by the approaches I was seeing in other videos, but yours made it seem doable. It worked like a charm! I swapped out the drain pump motor with no issues at all. I've got a load of laundry going right now! Thanks again and God bless you! 😀🙏

[@QuickAndEasy5MinuteAppliance]

Awesome, I’m so glad it worked and saved you time and money 😊 I hope you’ll click here to support us by joining our Channel: kzbin.info/door/GpInAejvpfVVE4FHB_L-Dgjoin You’ll get Live Appliance help when ever you need it.

[@michealkinney6205]

Worked way better than every other video I saw, which required nearly taking apart the whole front end. Saved me a lot of effort and it was actually somewhat enjoyable. Plus less to keep track of was nice too and it only took like 10-15 minutes all in. I'm glad I stumbled upon this! Thanks!

[@QuickAndEasy5MinuteAppliance]

Thanks so much Micheal 😊

[@drimmie]

I've also seen similar videos. It seems certain (maybe older?) Samsung washer pumps aren't as easily accessible from underneath. Not quite sure myself, this is my first time repairing a washer

[@johnclark7894]

Thank you for posting this!!! I just ordered my pump and was worried about taking the entire front off of my washer. Really the stress of having to get the gasket off and back on without damaging the metal spring clamp in the process. (Or any other part for that matter). Looking at your video and seeing the comments seems this is the real way to go. Thanks again for posting this video!

[@jonm4995]

You, sir are a legend. I found your video a while back but didn't change thr pump because it was still working, just had issues starting. Found water under the washer the other day, grabbed the pump I had on the shelf, a jack stand to keep the washer from falling forward and a screwdriver and was back in business in about 10-15 mins. My leak turned out to be the drain hose cracked where it was on the bend support going into the drain pipe so I cut it off there since i never shortened the drain on install. God bless you, sir!

[@QuickAndEasy5MinuteAppliance]

Thanks so much Jon😊🙏

[@ranjeetadhikari6031]

Thank you very much for this video. Samsung repair guy asked me $280 with parts. Luckily got to I watched this video repeatedly for 5 times to motivate myself to do the job , I ordered pump from Amazon for $26 and today I replaced it. It took me around an hour because it was the first time I ever did anything like this with washing machine.

[@QuickAndEasy5MinuteAppliance]

Wow, Nicely done. You saved a lot of money.😊😊😊

[@seasonschangin]

music to my ears... minute 3:17 "dont remove the whole housing" thank you. i got this!

[@QuickAndEasy5MinuteAppliance]

Very cool😎 Thank you

[@matthewkupelian3004]

Absolutely amazing video.....I was able to replace the drain pump in about 20 minutes (once I got it pulled out and leaned back), for about $30 for the part. Other videos showed people practically dismantling the entire top and front to get to it. There was PLENTY of room under there to get to it. Once you take those front screws off, it was easy to twist the assembly around to get to the pump screws; didn't even disconnect any hoses. So easy! Thanks!

[@QuickAndEasy5MinuteAppliance]

Thanks so much Matthew😊😊😊

[@RickityRawDawg]

Fixed my washer in about 15 minutes thanks to this gem! Wasn't looking forward to taking it all apart! Thanks for the video!

[@QuickAndEasy5MinuteAppliance]

Thanks so much😊👍

[@kapokkid1797]

Thanks for posting this, it made a very long job into a pretty short one and (so far at least) is working like a charm.

[@QuickAndEasy5MinuteAppliance]

Excellent, thank you 😊

[@debbieli9596]

Thank you!!! None of the other videos showed this exact model! I really appreciate you making this video! It was so easy to fix!

[@QuickAndEasy5MinuteAppliance]

Thanks so much Debbie, Happy to help😊👍

[@AceTheChapin]

Really helpful tutorial! Helped my father and I save about $200+ on a service repair. Bless you, kind sir.

[@roshanhritik]

This world has hope till we have genius like you. Thank you so much just fixed mine drain motor changed

[@QuickAndEasy5MinuteAppliance]

That’s so nice, thank you so much 👍

[@ElleAndy]

Thank you so much!! Your video was by far the easiest and fastest way to fix it. We fixed ours in about 30 minutes for $30 bucks. Subscription well earned :)

[@QuickAndEasy5MinuteAppliance]

Wow, Thanks so much Laura and also thank you very much for subscribing.❤️👍😊

[@richiesmith3462]

Thanks. Saved me some time. I was dreading removing the dryer.

[@QuickAndEasy5MinuteAppliance]

Excellent 😊

[@Boarderrt1]

Thanks man, so much easier than taking the whole thing apart, unfortunately I had a leak and had to go back in and secure the tubing better, think I loosened it pulling the pump back but awesome vid man!

[@Boarderrt1]

Also, I think the original motor might have been okay when I pulled it off, there was a string that fell out, I think it was stopping the propeller from rotating, but yeah, don't think I am going to buy samsung appliances again, might go with LG or Whirlpool

[@QuickAndEasy5MinuteAppliance]

Nicely done😊😊

[@franklopez8552]

Hello Thank you,thank you, thank you!!! My washer and dryer are installed in the kitchen area stacked. Extremely small space, your video helped me su much. Thank you great video..

[@QuickAndEasy5MinuteAppliance]

Thanks so much Frank👍

[@blairakana9984]

I give you a lot of credit for doing this type of work. I have no patience to be taking off all those screws and panels. I thought about learning how to repair washers and dryer‘s, but after trying it and watching all the videos. I’m just not a guy that has a lot of patience to be taking apart every little screw, wire connecto, bolts, and panels. Great video though.

[@patanpromo8284]

Thank you for your video helping me a lot and you saving me to pay around $350 for this issue that’s a repair company going to charge me thanks a lot🙏🙏🙏

[@rubensalgado8337]

Great video!!! So easy to remove ! Thank you so much , I removed my pump and turns out it had a hair ball preventing it from turning , I heard a humming noise FYI and I removed the hair and like magic! Working gre again ! So happy lol

[@NMBSEAL]

Your comment and this video saved me so much time and money! I have my units stacked in a super small closet in the back of my house. No room to move the units much without pulling it out of the closet. Every video showed to pull the front off. The underneath method was right on point! Then once I popped the pump out, hairball!! Hooked it back up, turned it on and it drained!!! Thank you both so much!!

[@raymondreyes7362]

@@NMBSEAL lol these comments and the video are saving me time and money now. was the hairball caught up in the motor impellers? I will be doing the repair this evening.

[@NMBSEAL]

@@raymondreyes7362 yes sir, it was sitting right I there in a neat little ball. Pulled it out, plugged it back in and worked like brand new lol.

[@pamubrun4326]

Awesome tutorial, thank you so much. Stay well

[@QuickAndEasy5MinuteAppliance]

Thanks Pam😊

[@alexandrewillame1789]

What is the part number?

[@ericadelgado3397]

AWSOME VIDEO!!! my I know the motor part number my washer not draining need to order this part. I've tried everything believe this may be what i need to do.

[@QuickAndEasy5MinuteAppliance]

Sure, Can you send your model number?

[@ericadelgado3397]

@@QuickAndEasy5MinuteAppliance WF42H5200AP/A2

[@rockemhaud8360]

Does the power wires go in any side blue and purple to motor?

[@QuickAndEasy5MinuteAppliance]

Either way will work👍

[@PewDieC8kes]

Sir I have a question, what if the washer is leaking from the bottom, washer pump sounds weird, is replacing the pump will fix the leak or no? Or is it maybe the hose connected to the pump? Thank you for this video 🙏🏽

[@QuickAndEasy5MinuteAppliance]

Can you send this same question along with your model number to my email at: [e-mail]

[@clintgabbard8189]

Thank you bro

[@QuickAndEasy5MinuteAppliance]

Your welcome 😊

[@supersawyer358]

So I keep having the SC 5C codes indicating draining issues and the filter isn't plugged and the drain hose isn't kinked so is the motor the problem?

[@QuickAndEasy5MinuteAppliance]

Here’s a great video on replacing the pump:kzbin.info/www/bejne/Z5nFhpufhrRpbLc These pumps wear out fast and are cheap to buy.

[@supersawyer358]

@QuickAndEasy5MinuteAppliance thanks !

[@maddier1388]

Great fixed it today! Thanks

[@mrmoll2]

What was the part number on that pump part? Could not read when he shined a light on it.

[@QuickAndEasy5MinuteAppliance]

Can you send that question to my email at: [e-mail]

[@chrisgold7924]

Good job!

[@QuickAndEasy5MinuteAppliance]

Thank you

[@jk730721]

If the motor is bad would you hear it making noise? I removed my coin trap and cleaned it but, the washer won’t drain. It does a noise that it’s trying to pump. I Wilson get some water out of the hose when it’s attempting to drain.

[@charleysturbos7320]

Another channel says when you hear your motor going and theirs water in their just pull the drain hose from back and see if it's pumping out ok.

[@studyallthetimeallthetime8473]

Part No. for the motor?

[@isaamali2888]

Hi ,i have samsung washer model number wf45m5500ap/a5 shows code HC how i fix it please when i take out the clothes doesn't show the code and works but when i put them in the machine i see the code and doesn't work

[@LiLi0881]

What error would appear on the control panel if this were the issue? My Samsun is showing a "NF" error and there is water all over the floor. The cycle in the washer has stopped and the door is still locked. Help! Model:WF220ANW/XAA

[@charleysturbos7320]

Water should be sealed. Check your o ring on the coin trap as he says.

[@dulceleon2149]

Help!! I’m getting a 5E error code. I opened the coin trap, cleaned and drained. Started it back up to spin only and it won’t spin or drain properly! It starts and the door locks but it will just sit there eventually giving me the error code again! Please help!

[@QuickAndEasy5MinuteAppliance]

Time for a new drain motor.

[@dulceleon5302]

Quick and Easy 5 minute Appliance Fixes Thank you!!! Now I just gotta figure out the type I need for my model! We will be following your video! Thanks so much!

[@charleysturbos7320]

@@QuickAndEasy5MinuteAppliance I don't see the link for this part and can't read the part number you showed.

[@wbfjkerr]

Well, I just did this and it seems to be pumping so that the cycle finishes, BUT now there's a leak somewhere.

[@QuickAndEasy5MinuteAppliance]

I would make sure the new motor is on securely by tightening the screws that hold it👍

[@jremeee1599]

Our washer is stuck on 9 minutes. And won’t drain completely. Should this fix it?

[@QuickAndEasy5MinuteAppliance]

I think that will do it👍

[@DwightDKelly]

Help! HELP!!! My washer will not drain in the waste drain. But it will drain in a bucket. I guess at a lower level. Is this a drain pump problem? I hear the motor running but water will not drain unless I take the hose out and lower in a bucket. When I raise the hose, the water stops draining. When I lower, it will drain in bucket.

[@QuickAndEasy5MinuteAppliance]

Are you able to open up the coin trap to check for obstacles ?

[@elmermagsino834]

Pls send me the part no of the pump.. i have the same problem.. Thanks

[@LuisMartinez-vm5vv]

Did you get part number you can share to me thank you

[@nsudatta-roy8154]

@@LuisMartinez-vm5vv whats your model number?

[@richardweimer2349]

This would not work for this LG unit since they’re held in place by three bolts from the top.

[@tompeterson7917]

Scott, Sent you an email. Thx!

[@chanthetbo6248]

how to fix my drain pump water did't have power

[@andrewhigdon8346]

Jeez he’s not gonna clean the floor where it was sitting? Am I uptight? Is it me? It’s me right? I’m a neat freak. Not hardly

[@QuickAndEasy5MinuteAppliance]

🤪😂😂😂