Samsung Washer Paused by itself randomly. Resolved, Fixed

Samsung washer stops at RINSE or SPIN.
My Samsung washer paused randomly byitself. I have removed the protected film from the power inverter board which could trap the heat between the protective film and board. After removing the film, it works normally. Resolved.
I think this was a design issue.
The thick protective film was trapping
heat inside the board, causing
random blocking of the control
signal or current in the circuit. After
removing the film from the power
inverter board, the washing cycles
completed successfully five times in a
row. This resolved the previously
unknown 'pausing' issue.
You may want to consider replacing
the power inverter board with a
newer version or simply removing
the film from the board. If this helped, please click 'Like'. Thanks!
Do not forget to cover the board with existing black plastic to keep the water out of the board in case.

[@1elmofles]

Thanks bro. I will try to do this tomorrow and i hope it works for me because the wife is driving me crazy 🤪🤣

[@yvonnewright29]

Just wanna say thank you. I had the same problem and your video helped me figure where the problem was coming from. I opted to just buy a new board through Amazon and now it 100% again.

[@MrYoonKnow]

Thank you for letting me know the good news!

[@Kok119]

I fix it, motor not moving sometimes is on, it's a Triac on the motherboard that command the motor and motor speed, try to soldering it or change it if it doesn't work

[@niksou746]

hey , did you buy a new board or just cleaned the existing one?

[@MrYoonKnow]

I just removed the silicon covering from the board, Carefully...

[@stanjs]

The problem may repeat in a long wash cycle, when the heat accummulates on the board over longer operational time.

[@MrYoonKnow]

It might be correct. So I have removed the silicon covering on the control board. No more pausing any more!

[@MrYoonKnow]

And covered the top with existing black plastic sheet to protect from water.

[@ohdannyboyy]

Is it still working from this fix?

[@MrYoonKnow]

Yes, It has been fixed by this cleaning up. It's working fine so far.

[@MrYoonKnow]

It's perfectly working.