Hey Guys, it's RM1.20 for one lubed switch. I mentioned the wrong price in the video so sorry!! @BranClicks on IG
@arham_pk3 жыл бұрын
What does rm stand for
@staright21633 жыл бұрын
Thank you very much for also filmed how you mod this! It makes it easy to follow, plus your editing is on point! I am going to do the same thing you did on my RK68, using JWICK red switch.
@itssamueltan3 жыл бұрын
Welcome! Just wanted to help everyone out
@shaquilleoatmeal003 жыл бұрын
loving the "thock thock" sounds
@itssamueltan3 жыл бұрын
My first thock thock keyboard 😢
@xxrelaxbrotherxx3 жыл бұрын
thock thock
@InanBaragas2 жыл бұрын
Just started hobby in mecha keebs. Finally I found fellow malaysian here! greetings from Sabah!
@itssamueltan2 жыл бұрын
Hi! Greetings from Sarawak 🤣
@beaudanner3 жыл бұрын
wow, that's night and day. well done
@itssamueltan3 жыл бұрын
Thanks! 🤣
@zampai5 ай бұрын
the upside down spacebar is driving me up a wall
@itssamueltan5 ай бұрын
It's the best way, you should try 👀
@adamdanish92292 жыл бұрын
Nice one man it’s rare to find a keyboard mod youtube channel as good as this that’s from Malaysia. Keep it up! You gained a sub from me!
@itssamueltan2 жыл бұрын
Thanks man! Hope you'll like my Content
@aisaromar80383 жыл бұрын
dude i dont even know we can buy pre lubed switches and stabilizers in Malaysia. thanks for the link man. i was searching for g68 luckily your vid get recommended. super helpful
@itssamueltan3 жыл бұрын
Glad I could help, enjoy the hobby!
@nurafifsuhaylnoorzaidi40373 жыл бұрын
Im planning to buy one of these and this video made me confirm my plan ahaha. Great vid!
@itssamueltan3 жыл бұрын
Thanks bro!
@limitzist3 жыл бұрын
damn i love the keycaps and that braided cable 😳 hope ill get to upgrade my keyboard to something like yours in the future
@itssamueltan3 жыл бұрын
It's all possible goodluckk!
@saffanahazam45916 ай бұрын
thank you very much for this videos it helped alot
@itssamueltan6 ай бұрын
Welcome!
@azeemjaafar143 жыл бұрын
Lovin the vid bro.. just how great it is to see malaysian doin this plus really helps with the links you provided 😍😘
@itssamueltan3 жыл бұрын
Just trying my best haha hope to help everyone!
@YuiSenpai3 жыл бұрын
naise! love your video quality man. need to upgrade my keyboard asap xD
@itssamueltan3 жыл бұрын
thanks bro! have fun upgrading
@Creamy_ExePlayer3 жыл бұрын
Seem you use cherry profile keycaps set for this How do you feel about it? Does it has any interference problem? As i know, this keyboard has south facing pcb, and most of south facing keyboard has interference problem with cherry profile keycaps
@itssamueltan3 жыл бұрын
So far not at all, they are quite okay for my daily use
@Edmundmon903 жыл бұрын
I just got my rk84 keyboard. Hahahah.. this video really helps. And good to see someone from kuching do a youtube channel about custom keyboard. Keep it up bro.
@itssamueltan3 жыл бұрын
Thanks bro! Hahaha will try my best
@Edmundmon903 жыл бұрын
No probs!! Btw, idk if u still remember, but I'm the one who buy the keyboard cable from u last month. 😂
@itssamueltan3 жыл бұрын
@@Edmundmon90 oh nice 🤣 hahaha I think I remember
@Abc-in9ej2 жыл бұрын
underrated
@itssamueltan2 жыл бұрын
Thanks! 🤣🔥
@eenakulot2 жыл бұрын
Nice vid! I was planning to get an RKg68 as well and try my hand at modding. This really helped:>
@itssamueltan2 жыл бұрын
Glad I'm able to help, have fun with your build 🔥
@farahnabilah31773 жыл бұрын
ive been putting my foam in the wrong place this whole time 😑 thank you for this video!!
@itssamueltan3 жыл бұрын
No problems 🤣🔥
@darrenlye66223 жыл бұрын
Omgs I love ur video bro keep it up ya 💓
@itssamueltan3 жыл бұрын
Thanks bro 🔥
@carldrickjunatan2713 жыл бұрын
niceeeee! Keep it up!
@itssamueltan3 жыл бұрын
Thanks!!
@kelvinkoay59422 жыл бұрын
Great tutorial!
@itssamueltan2 жыл бұрын
Thanks!! 🔥
@muhammadqhadrisharkawi16413 жыл бұрын
Good video! Deserves a sub.
@itssamueltan3 жыл бұрын
Thanks!!
@frenzy6512 жыл бұрын
I have this keyboard and have one problem when typing. Often for each key, after being pressed, it keeps inputting even when the key has already de-pressed. Resulting in repeated character, until i reset it by pressing any random keys. Is this a major problem with the rk68, or is it a defect on my board. Anyone with same issue? Mine is stock not modded. All thoughts of modding are cancelled when this issue emerged.
@itssamueltan2 жыл бұрын
Hey u can try pressing FN+ spacebar for 3 seconds to reset it if not u can try claiming the warranty
@syamilarif21723 жыл бұрын
Love your video!
@itssamueltan3 жыл бұрын
Glad you enjoyed it!
@VikxMax2 жыл бұрын
I recommend lubing the stabs cuz now you got some rattle. I hope you the best good luck
@itssamueltan2 жыл бұрын
Oh I Holee modded it already it's fine now
@fahmiahmad79903 жыл бұрын
the sound test before and after using the same switch?
@itssamueltan3 жыл бұрын
Sound test is before added all the mods and after
@ayushpramanik8083 жыл бұрын
different switch
@jace16012 жыл бұрын
Where did you get the keycaps at the start @0:13? The black & grey one. Are they stock?
@itssamueltan2 жыл бұрын
No I got them from KBDFans, it's their grey keycaps
@bigboidanial68232 жыл бұрын
Hello, where did you get the black and white keycaps from?. I really like the keycaps
@itssamueltan2 жыл бұрын
Hey I got it from KBDfans on Shopee, I believe it's on their website too!
@mawuzuki3 жыл бұрын
Coming from clackers malaysia bro. your video always neat and cleaaan ✨ btw, the right shift and alt is 1.75u is it?
@itssamueltan3 жыл бұрын
hey bro! Alt is 1u and the shift is 1.75u
@originalzul42763 жыл бұрын
nice bro
@borjph8117 Жыл бұрын
Do you know where can I download the software where I can change the backlit colors using sliders?
@itssamueltan Жыл бұрын
RKgaming.com
@fitrisuhaimi45812 жыл бұрын
A very great video man and mine are already on its way. I'm planning to do the same mod as yours but using Gateron clear instead. As for the PCB foam that you're using, is there any hole that you need to cut by yourself to make it fits or it already came with the screw hole line up with the RK68?
@itssamueltan2 жыл бұрын
The version I bought has the holes precut already, but if u get one that doesn't have the holes u can just use a penknife to pole a hole and screw in no problems
@itssamueltan2 жыл бұрын
All the best modding!
@JOELLZE3 жыл бұрын
Hope do they look with shine through keycaps? Seems like a good switch especially when lubed but I wonder if the back lighting is effected badly
@itssamueltan3 жыл бұрын
They look awesome with pudding keycaps or shin through keycaps, after lubed it still looks fine nothing is affected
@JOELLZE3 жыл бұрын
@@itssamueltan Right that's great, I see you've used the Akko Rose reds. Gateron Milky Yellow or Akko CS Matcha?
@itssamueltan3 жыл бұрын
@@JOELLZE hmmm I would suggest Akko if u don't wanna lube, if u plan on lubing definitely get the milky yellow
@SoulesOfficial2 жыл бұрын
Since the RK68 backlight isnt the brightest, it gets a bit darker but not much
@syfqfzl3 жыл бұрын
Baik gila 👌
@itssamueltan3 жыл бұрын
Boleh Cuba also boss 🤣
@nasrulazizi13332 жыл бұрын
currently im looking for the transparent case for this keyboard. have u ever seen any of it?
@itssamueltan2 жыл бұрын
Yea, u can search Project 65 on shopee, or my latest RK68 video
@mellowwwy2 жыл бұрын
After you remove the stock stabilizers at 3:01, can you just switch the stabilizers straight away at this step without having to further disassamble the keyboard?
@itssamueltan2 жыл бұрын
U can do that if you're not using any plate foam, because the foam will block the stabs for the soacebar
@mellowwwy2 жыл бұрын
@@itssamueltan alright, thank you for the quick reply!
@eri52762 жыл бұрын
did you film the gateron yellows or just lubed?
@itssamueltan2 жыл бұрын
Just lubed
@juinalcones28 Жыл бұрын
There is no keycaps interference? Planning on buying the same keycaps set
@itssamueltan Жыл бұрын
There is a little but I don't mind it
@toppaine40082 жыл бұрын
Cool video but I have a question, why do you put only a small amount of case foam in the keyboard but don’t put it until it’s all fit? Also I think you should put pe foam so it sound creamier
@itssamueltan2 жыл бұрын
In a plastic case it doesn't really matter how much you use actually, and if you have the time and enough materials yes you can make it look good and fit everything. Yea PE foam does make it better too why not. 🤣 You can do anything you want this is just my method
@WtfISLW2 жыл бұрын
Where can you buy the keycaps besides the sight you provided
@itssamueltan2 жыл бұрын
Honestly I not sure but I think AliExpress or banggood has them
@waisoon81443 жыл бұрын
do you think lubing is actually worth the time? I'm modding my first keyboard and doing everything from holee modding and converting it from wired to wireless. the only thing im hesitant about is lubing switches cause it takes alot of time.
@itssamueltan3 жыл бұрын
Lubing will go a long way in mechanical keyboards, if u want a better typing experience and better sounds u should because it's worth it but If u don't really care how it feels and sounds u can leave it unlubed
@fatalwinja20653 жыл бұрын
For what it's worth I'm going to grab a set of bobas as I've heard they're some of the best out of the box and that lubing them only provides a very slight difference.
@Aphliz2 жыл бұрын
@@fatalwinja2065 sometimes it comes very scratchy
@anonymouse95932 жыл бұрын
is there no cherry profile interference with the north facing switches ?
@itssamueltan2 жыл бұрын
For some slimmer pbt, like non double-shot there's sometimes no problems
@chamr42912 жыл бұрын
What keycap set is that btw Sry cuz ur description thingy kinda messed up
@itssamueltan2 жыл бұрын
Hey umm I got it from Taobao but it's from KBDFans
@megumi_02 жыл бұрын
do you know if the RGB lights will have any problems shining through with certain switches? I vaguely remember hearing someone say something about North facing LEDs or soemthing like that, which can be obscured by the switch...
@itssamueltan2 жыл бұрын
Nah it's all good honestly, just some north facing RGB PCB might have problems when u use Cherry profile keycaps, that's all. No worries all switches actually fit almost 90% of PCB
@zhadumshasheer3 жыл бұрын
Good video, sounds like the keeb was doubled in price for accoustics afterwards. :)
@itssamueltan3 жыл бұрын
Yeah, i was really surprised too
@ethanchow69062 жыл бұрын
Tapemod it as well and it'll sound thocky af
@itssamueltan2 жыл бұрын
Tape actually makes it sound poppier hahaha
@Spacebarf2 жыл бұрын
great video man! I am about to do my first modding to a keyboard using the RK68. Im going with something similar but black and green it's going to be like a hacker style. I am also going to get Japanese characters too just because I love the look. is it possible to reprogram the pg up and pg down to home and end in the software and then place the relevant keycaps there?
@itssamueltan2 жыл бұрын
Hey, I think it's possible with newer versions, but have fun modding!
@idle4042 жыл бұрын
Are the keycaps cherry profile? If it's cherry, any interference?
@itssamueltan2 жыл бұрын
Yes cherry profile and no, no problems faced with mine
@katcalpito79613 жыл бұрын
hi did u use 6.25u or 7u for the spacebar stabilizers? then 3x2u thank you 💓
@itssamueltan3 жыл бұрын
its 6.25u and 3x2u
@katcalpito79613 жыл бұрын
@@itssamueltan thank you 😊
@yuseong8971 Жыл бұрын
I'm pretty late but I was wondering what is the size of the stabilizers for the rkg68? I'd also like to do the same mods as yours but I'm not sure what size I should get
@itssamueltan Жыл бұрын
It's the standard size, 6.25u for the spacebar and 3 more 2u
@frogi_hobbies7 ай бұрын
hello sam! (im new... and also a new sub!) :D
@itssamueltan7 ай бұрын
Hello! Thanks for the sub
@bubucl3 жыл бұрын
Hey nice video! May i know whr u get ur grey keycaps before the mod?
@itssamueltan3 жыл бұрын
I got it from KBDfans Grey PBT DyeSub
@bubucl3 жыл бұрын
@@itssamueltan i see, any shop u would recommend in shopee or lazada?
@itssamueltan3 жыл бұрын
@@bubucl I added the link to the description check it out!
@bubucl3 жыл бұрын
@@itssamueltan saw it, thanks!
@nelsonnw3 жыл бұрын
the link in the description won't work for me :(
@itssamueltan3 жыл бұрын
Which one?
@CleanSwip_2 жыл бұрын
2 questions, Is the keycaps cherry profile? and does the switches north facing or south facing?
@itssamueltan2 жыл бұрын
Yes cherry profile, and yea it's north facing switches but no interference from mine
@CleanSwip_2 жыл бұрын
@@itssamueltan howw
@CleanSwip_2 жыл бұрын
@@itssamueltan yea and implanning to buy rk68 with akko rose red switches andakko macaw keycaps cherry profile does it fit?
@tzerxuan4022 жыл бұрын
Will Gateron, cherry, kalih switch will be able to fit in the RK switch socket? If so, I dont have to buy the Gateron version if i want to change to switch to others?
@itssamueltan2 жыл бұрын
Yes it will all fit from what I know
@tzerxuan4022 жыл бұрын
@@itssamueltan Thanks :)
@dhananjayadelfano96273 жыл бұрын
how are the quality of the keycaps especialy the black modifier ones ?, i am planning to buy a simillar one in the near future. great video by the way
@itssamueltan3 жыл бұрын
Really great honestly, I love the theme and feel
@tripbitshooter61693 жыл бұрын
The board originally came with RK branded switches right? Was it able to fit the Gateron Yellows perfectly, without needing to crimp the pins like on an oetemu board?
@itssamueltan3 жыл бұрын
Yeah no problems at all because it's 5pin
@sebastianarizaparra54902 жыл бұрын
@@itssamueltan in this keyboard, can i use 3 pin switches too? I think i Will Buy it but the switches that I want ate 3 pins I think, the akko CS or something like that.
@itssamueltan2 жыл бұрын
@@sebastianarizaparra5490 yes 3pin will fit no problems
@amzet_5132 жыл бұрын
do those milky yellows have the north facing interference?
@itssamueltan2 жыл бұрын
With slimmer keycaps no, with thick pbt it Double-shot yes
@Z0niC1012 жыл бұрын
How could I replace the case keeping the pcb
@itssamueltan2 жыл бұрын
Hmm that is kinda hard but u can 3D print a case
@muhammadwaliuddin70473 жыл бұрын
Daymn boi
@itssamueltan3 жыл бұрын
U gonna do it?👀
@muhammadwaliuddin70473 жыл бұрын
@@itssamueltan I'm gonna say yes but my wallet said "hell no! You're broke." 😂
@itssamueltan3 жыл бұрын
@@muhammadwaliuddin7047 🤣 maybe next time
@muhammadwaliuddin70473 жыл бұрын
@@itssamueltan pray for me bro 😂
@user-yo7zk1gb9q2 жыл бұрын
btw the foam in the case is not making a diffrence its too little
@itssamueltan2 жыл бұрын
That's all that I could fit honestly more and it would bent the plate
@user-de4xh5mz6h3 жыл бұрын
the spacebar looks a bit tilted?
@itssamueltan3 жыл бұрын
Yeah I flipped it and realized it is abit tilted
@Istril2 жыл бұрын
The after mods sound test sounds kinda weird, is it because that the PCB is north facing and you're using a cherry profile keycaps?
@itssamueltan2 жыл бұрын
Yes but some worn have interference, so far mine are ok
@shrimp54282 жыл бұрын
how are you using cherry keycaps on a north facing pcb??
@itssamueltan2 жыл бұрын
Hey some cherry clones don have problems with north facing switches
@ez_lan62713 жыл бұрын
Add tape and pe foam mod
@itssamueltan3 жыл бұрын
will try it for my next mod
@EngineeringSimplified2 жыл бұрын
I am thinking of doing the PE mod but I read there is a risk of PCB short-circuiting. Are you still using this PE mod on this keyboard?
@itssamueltan2 жыл бұрын
No, I recommend Poron tbh it's better
@TheMessedUpMind3 жыл бұрын
Does this keyboard have issues with the LED bulging out? Heard that this might cause incompatibility with some switches that do not have space for the bulge. Otherwise, great build!
@itssamueltan3 жыл бұрын
Ahh no, RK G68 has LED under the PCB, the RK860 of RK100 has that problem
@TheMessedUpMind3 жыл бұрын
@@itssamueltan so this keyboard wouldn’t have any interference issues with cherry profile keycaps?
@itssamueltan3 жыл бұрын
@@TheMessedUpMind nope would work fine
@thiemovanrijn21382 жыл бұрын
You got a link for eu for those 👌 keycaps.😁
@itssamueltan2 жыл бұрын
Hey not sure if they have it but you can try searching in AliExpress or Amazon
@thiemovanrijn21382 жыл бұрын
@@itssamueltan Ok Thanks, and great job on the customize 👍
@nicholaslau44562 жыл бұрын
Hi, for this keyboard is there any interference with the cherry keycaps ?
@itssamueltan2 жыл бұрын
For me there wasn't any, but with thicker double shot pbt there will be
@nicholaslau44562 жыл бұрын
@@itssamueltan thank you, just for reference, how thick is your keycaps ?
@ItsjustAstolfi Жыл бұрын
Uh for the stab which you option?60 tkl or 2u only(sorry I'm new)
@ItsjustAstolfi Жыл бұрын
Also how much mm the foam to cover the hollow
@itssamueltan Жыл бұрын
60% or TKL would work, and the foam I suggest 1mm and below
@RochTheReaper2 жыл бұрын
Hi! I'm planning to mod my RKG68 however I'm wondering if there's a difference between a lubed/clipped/modded stock stabilizer vs a lubed/clipped/modded Everglide/Durock stabilizer?
@itssamueltan2 жыл бұрын
Hi there's actually a very big difference, stock ones are not so tightly fitted but after doing alot of mods it can only be better but not better than Everglide or Durock stabs
@RochTheReaper2 жыл бұрын
Oh I see! Thank you so much for answering!
@SoulesOfficial2 жыл бұрын
There is a difference, but it's quite easy to get a thocky sound by using the Stock stabs. But i gotta mentions that it is a pain in the ass to holee mod the stock ones, since they are prelubed and u need to get the lube of the surface where you put the holee mod thingy. Sorry for the late answer tho
@missy_naneylove3457 Жыл бұрын
Hi. Are all the links still can be use? I'm new at modding and really need help. I'm from Malaysia so can use Shopee.
@itssamueltan Жыл бұрын
Hey it should be still working fine, if you have any problems can comment here and I'll check it
@maru6ix3042 жыл бұрын
does using a stocked mod stabilizer and cherry hv much difference on the sound??
@itssamueltan2 жыл бұрын
Honestly yes, there's a big difference
@maru6ix3042 жыл бұрын
@@itssamueltan does rk68 stabilizer pcb screw in, plate mounted, or snap in? can I use durrock for rk68?
@damonke1782 жыл бұрын
whered u get ur desk mat
@itssamueltan2 жыл бұрын
From shopee, link in description
@bonktoryu2032 жыл бұрын
Can you change the Stabs without opening the board?
@itssamueltan2 жыл бұрын
Yeap u can, I opened it because I wanted to add the foam
@dezoru10942 жыл бұрын
will durock's plate mounted stabs work on this?
@itssamueltan2 жыл бұрын
Yeapp any plate mounted stabs will work
@dezoru10942 жыл бұрын
@@itssamueltan alright, thank you!
@mukakanglupa85622 жыл бұрын
what keycaps before ur upgrade? the grey one
@itssamueltan2 жыл бұрын
It's from YMDK link in description
@damiengoh68612 жыл бұрын
Are the stabilisers pre clipped?
@itssamueltan2 жыл бұрын
If u get them stock, no u need to clip them yourself but it's quite easyy
@yuotosaka45612 жыл бұрын
planning to get those gateron milky yellows too and gonna pair it with doubleshot pbt keycaps which are cherry profile. in any case, would there be any interferences?
@itssamueltan2 жыл бұрын
With Double-shot there's a high chance
@yuotosaka45612 жыл бұрын
do u have recommendations for budget linear switches that won't have interference with doubleshot keycaps?
@muhammadalfayedbinmohammad88712 жыл бұрын
Hi just wanted you opinion. Do you think the cherry mx brown is good for gaming and typing or do you guys have a better option. Thanks in advance 😊
@itssamueltan2 жыл бұрын
Hey I would say they are good but now there are better options for cheaper, but if you don't want to venture u can just get cherry brown
@kichop3 жыл бұрын
would it be more economically feasible if I buy the switches and lube them myself? or are the lube expensive? And is there any difference between foaming the plate and foaming under the plate?
@itssamueltan3 жыл бұрын
yeah u can defi lube them yourself, it may be quite hard if u have alot to lube but have no tools, like switch opener, lubed, lubing statin etc. Foam under the plate dampens the sound when typing, foam in the case get rids of echo
@feather15123 жыл бұрын
Which keycaps were you already using in the video before you switched them out
@itssamueltan3 жыл бұрын
KBDfans Grey Dye-sub keycaps, link in desc
@maru6ix3042 жыл бұрын
does gateron milky yellow have gaps on it? since rk68 hotswappable is limited (oly for switches tht hv gaps on it)
@itssamueltan2 жыл бұрын
I honestly don't understand this, what do u mean by gaps?
@maru6ix3042 жыл бұрын
@@itssamueltan rk 68 led lights kinda bulb out so mybe there is a reason why we can only use gapped switches? but since u r using the switches fine on rk68, it should be no problem at all..
@itssamueltan2 жыл бұрын
@@maru6ix304 ah I think I know what u mean, newer versions of RK all have flush LEDs now so any switch can fit, but be careful with older versions they might have this problem
@maru6ix3042 жыл бұрын
@@itssamueltan I see, thanks for ur information!!
@ammarhilmi37612 жыл бұрын
Hi, I read somewhere where they said that cherry profile keycap will have an issue with north-facing led. Is that true? or it is only for gmk keycaps?
@itssamueltan2 жыл бұрын
Mostly for some GMK that are Cherry Profiles, currently mine has no issue tho
@ammarhilmi37612 жыл бұрын
@@itssamueltan I see.. thanks though! Good video btw 👍🏻
@hisdesciples2 жыл бұрын
Where can I get those keycaps and do I need to change the switch to add these keycaps?
@itssamueltan2 жыл бұрын
No the original ones can fit the keycaps, I would suggest Shopee if you're in Asia but AliExpress and Amazon should also have them
@hisdesciples2 жыл бұрын
@@itssamueltan I’m in US.
@hisdesciples2 жыл бұрын
@@itssamueltan thank you
@gubpkt90162 жыл бұрын
Hows the connectivity? Any latetency for gaming?
@itssamueltan2 жыл бұрын
2.4ghz no latency at all, Bluetooth has abit
@husainyard3 жыл бұрын
Is there a significant difference between rk reds and gateron milky yellows?
@itssamueltan3 жыл бұрын
Very big difference
@maru6ix3042 жыл бұрын
hi, do u have rkg68 software link? I cant found any of it :\
@itssamueltan2 жыл бұрын
I would recommend rkgaming.com
@maru6ix3042 жыл бұрын
@@itssamueltan thanks, rn I have an issue for the fn = number keys (f1-12) and I cant use them, how to fix this issue?
@renzoesteban86002 жыл бұрын
How can you know if it is fully charged btw?
@itssamueltan2 жыл бұрын
Umm I think your can check in the software, but I just usually charge 3 hours
@johnrembo15853 жыл бұрын
interesting. mine comes with the kailh hotswap sockets on the pcb. i thought all rk g68 come with the same set of parts.
@itssamueltan3 жыл бұрын
No really, theres 2 major factories that produce RK, for the US market and the Asia market
@johnrembo15853 жыл бұрын
@@itssamueltan ooooo got it.. perhaps that's the reason why they are not the same
@TaskForceStudio2 жыл бұрын
@@itssamueltan May I know what's the main difference between US and Asian version for rk g68? Thanks!
@muhammadaliuddin91752 жыл бұрын
how do u find keycaps for this keyboard btw, since this is not standard bottom row, i found that finding keycaps for this is a real struggle.
@itssamueltan2 жыл бұрын
Oh I get what you mean, I can suggest getting a full set of 130+, often times they already have all the keys u neeed
@muhammadaliuddin91752 жыл бұрын
@@itssamueltan ahh i see, thanks mate!
@muhammadaliuddin91752 жыл бұрын
@@itssamueltan i have another question, as for the plate, what material is it? is it brass or aluminium
@itssamueltan2 жыл бұрын
@@muhammadaliuddin9175 it's just aluminium for the stock one
@muhammadaliuddin91752 жыл бұрын
@@itssamueltan ahh i see, im planning to buy a brass one, but its hard to find keyboards parts here in malaysia
@maiskandar83583 жыл бұрын
Hello does the keycap has any interference since the pcb is a north facing one
@itssamueltan3 жыл бұрын
So far mine has no problems because of the OEM profile keycaps
@milkman67123 жыл бұрын
hey could you tell me if the quality of those keycaps are good? since i was going to get them for a build
@itssamueltan3 жыл бұрын
yes quite nice and thick
@lehoan37363 жыл бұрын
did it have interference with gateron yellow and cherry profile keycaps?
@itssamueltan3 жыл бұрын
Yes there is a lil, but these are clones so I think maybe its abit different? So I don't really feel it
@QAnyui3 жыл бұрын
I'm planing on buying foam for this keyboard. Anyone know what's the right thickness of the foam for the keyboard case?
@itssamueltan3 жыл бұрын
theres a link in the desc but aroumf 5mm would fit nice
@user-bh8jd2hq1y3 жыл бұрын
Early gang! 😃
@itssamueltan3 жыл бұрын
as always!
@cursedgrapefruit35703 жыл бұрын
Can you use screw in stabilizers like durock v2s in this board?
@itssamueltan3 жыл бұрын
No, this board uses a plate mount so it wont support screw in ones
@verdysulaeman46012 жыл бұрын
Hey, I hope you still responds to the latest comments. Is it safe to unmount the plate from the case? Is there any advice that could lend me to do it properly, without causing any problems afterward ofc.. anwyway TIA!
@itssamueltan2 жыл бұрын
It's very safe actually just have to be careful and take your time
@verdysulaeman46012 жыл бұрын
Yeah seems like it is.. okay then, thanks!
@cdy95672 жыл бұрын
did you change the case?
@itssamueltan2 жыл бұрын
No I just flipped it
@reimon54102 жыл бұрын
Are your keycaps cherry profile? If yes then were there any interference with the north facing switches
@itssamueltan2 жыл бұрын
Yes cherry Profile and no I had I no problems
@amzet_5132 жыл бұрын
@@itssamueltan How would i know if my switch won't cause the interference?
@AUFartool2 жыл бұрын
@@amzet_513 if it is see through or not (the bottom housing)