Watch this video if you'd like to see have easy it is to adjust the tension on a Vostok watch bezel. Tricks and Hacks for Vostok Watches: • Tricks and Hacks for V...
Пікірлер: 49
@JustOneMoreWatch7 жыл бұрын
Thanks for this Neal! My Vostok mod vid is recorded and scheduled and I acknowledge your knowledge! ;)
@HeartofTexasArmory7 жыл бұрын
Nice! Thanks brother, can't wait!
@WatchGeek6 жыл бұрын
Thanks for this, as I was modding mine the bezel turned from being properly tight to being completely loose so I used this method to make it just right again
@HeartofTexasArmory6 жыл бұрын
You're welcome brother! Glad it helped!
@edg67795 жыл бұрын
Thanks, mine was not loose but very tight so doing the opposite helped out alot
@coscorrodrift4 жыл бұрын
Same, quite the easy fix
@PacoElMapache6 жыл бұрын
thank you very much! unfortunaly I scratched the heck out of the case :( I guess it just adds more character ! :)
@Deus_Payne4 жыл бұрын
This worked great on my 80s 960 case scuba dude, the bezel was so tight that you could barely turn it. Thanks!
@natebaumgartner99586 жыл бұрын
Neal! You saved me again man... I bought one of those after market modded vostok bezels... it spun pretty loose AND it could be removed from the watch without any tools! After this video, it is tightened up solid. I thought I had flushed money down the tubes with that new bezel being loose... But you saved my neck. Thanks bro! Keep em coming.
@HeartofTexasArmory6 жыл бұрын
You welcome Nate! Glad it helped!
@thunderballzz2 жыл бұрын
This was super helpful, especially that part of getting the wire into the groove. Thanks man!
@TheWatchtowerWatchReviews3 жыл бұрын
Sound out lad! I was thinking of just getting a vice and forcing it on, so glad I watched this, easily got two bezels on now, they were too tight before! My Black Bay build can begin in earnest!
@lobdsk3 жыл бұрын
Mine was very loose. I made it too tight and when I put pressure on the bezel like to take it off it kind of self adjusted. Thanks for the vid it really helped man.
@hb9145 Жыл бұрын
Thanks a lot for these clear and to the point instructions! My bezel was almost impossible to move; it's perfect now.
@ianarnott29782 жыл бұрын
Thanks. My new bezel was very loose and this is the method I was using, your vid showed me I was on the right track. Fits perfectly now.
@whatsindansgarage25424 жыл бұрын
Good idea but I don’t think the copper wired is designed to be tightened since once I bend it the wire becomes too short the way not all parts of it touches the bezel. In the end I cannot fit the bezel. The wire needs to be a bit longer in the way that even when bent all parts of the wire should touch the bezel.
@robleech96976 жыл бұрын
Worked perfectly, thanks!!
@HeartofTexasArmory6 жыл бұрын
Nice work!
@grassulo5 жыл бұрын
I just did this to mine, got it and out of the box the bezel was so tight it was immobile, after a bit of spring tweaking it's now perfect, I also added a very small amount of light oil to prevent corrosion of the spring against the case since they appear to be different metals.
@HeartofTexasArmory5 жыл бұрын
Awesome work! I hope the video helped!
@ralfybaby4 жыл бұрын
Heh heh nice! I have a ton of these. And the trick actually does work for a vintage Rolex 1675 as well. Even though my particular Rolex was, shall we say, not made in Switzerland and also is not actually very vintage ....
@jcxme2 жыл бұрын
Thank you. I follow your instruction and my bezel is functional now.
@belluco5 жыл бұрын
Thank you very much! You save my watch!
@dunderhay91693 жыл бұрын
Very helpful, thanks 👍
@edmund89544 жыл бұрын
Seems like all the watch reviewers are here.
@michaelcorlione68112 ай бұрын
Thank bro
@steffhamburg90314 жыл бұрын
thank you! it works
@Xallov4 жыл бұрын
I got my amphibia today and the first thing was to tighten the bezel. It was sucha pain-in-the ass that I swear I feel like I just graduated and became a better man after I succesfully tightened it. It did not want to come off and it certainly did not want to get back on :D but I do love tha watch and everything that comes with it
@coscorrodrift4 жыл бұрын
the tape on the butter knife is a good tip, i've tried with a glasses cleaning cloth over the knife but the gap's too tight and the knife doesn't "cut" it hahaha, with the tape it's mega easy
@hendry47944 жыл бұрын
Thanks. When i modify my vostok and try to insert, it just come loose. Your video help me . I upload the result and the tension is better.
@newhuskytwenty5 жыл бұрын
Cleaning the Vostok with vodka? Why I'm not surprised?
@chrisduehring30423 жыл бұрын
super helpful...thanks so much!
@U2befantom3 жыл бұрын
Great video! This helped a lot, thanks!
@MCPOSJ117films4 жыл бұрын
I like ballistol for everything else though im not sure if it could do harm to a watch, maybe rubbing alcohol or like olive oil would be better.
@theleafsprungjeeperАй бұрын
Hi, thanks for the video. I have a question. While taking off the bezel on my new Komandirskie, the acrylic crystal also popped out and I didn't notice a rubber washer under it. So, I popped it back in. My question is how does the watch stay watertight without a washer? (like the washer in the back). Thank you in advance for your feedback.
@jacobambach81432 жыл бұрын
I just got the Amphibia Scuba Dude, and the bezel is really tight whereas my other scuba dude's bezel is less tight. I'll go and check with a watch repair shop and ask if they can fix it as you show in the video. Will get back to you how it went ☺️
@ottolehmann52866 жыл бұрын
My bezel makes a grinding noise and doesn’t turn smoothly, any tips?
@captainmerica24984 жыл бұрын
Otto Lehmann lube it
@peterowens2903 жыл бұрын
Seems the bezel "tightness" (or lack of) is a common problem even in new watches. I have a simple solution: demand the supplier refund or replace with properly functioning bezel. The better alternative would be for Vostock to simply improve QC in this area. How hard can it be? And a thankyou to Heart of Texas Armory for a really practical & helpful video.
@SolidChunkOfMetal5 жыл бұрын
merci
@DM-rc4yu3 жыл бұрын
I've struggled a lot with this and my conclusion is that changing the wire angles does very little. No matter what angle you set, the wire will conform to the bezel in the end. If the bezel is too loose, like it was the case for me, the only thing that helped was actually slightly bending the straight segments in. A bit hard to explain but basically you want more wire to show when installed into the groove. But it needs to be very precise as bending it just slightly more can cause the bezel to be too tight.
@hollywoodheiner60282 жыл бұрын
I tried the same thing with the bezel of my Pagani Design Sub Hommage and now Im not able to get in back on :(
@donp21666 жыл бұрын
Does this have to be done on an empty case, or can the bezel be removed and adjusted with the rest of the watch intact?
@probablywatches4 жыл бұрын
You dont have to remove the movement
@edmund89544 жыл бұрын
does all watches with a friction bezel use this wire?
@HeartofTexasArmory4 жыл бұрын
Yes pretty much all of the friction bi directional Vostok's will use the wire.
@oscarosullivan45133 жыл бұрын
I used a screwdriver
@Flankerivo3 жыл бұрын
Komandirskie, not Generalskie.
@butre. Жыл бұрын
still way too loose, might need to put some dirt back in