You’re doing awesome work here to help a lot people’s really very satisfied videos you put every single time 👍
@triple_lei4 жыл бұрын
Saved my ass. I always think I can remember how to put it back together as I disassemble, but I never do...
@simpson67002 жыл бұрын
i had no idea you could push the center piece of the gate out, mind blown
@doumanseiman26455 жыл бұрын
the gate color mod is too advanced for me hahahahhaha
@CIRCADES5 жыл бұрын
Thank you so much! Very well made and informative video, and wow, you really know your terminology!
@raycestg34473 ай бұрын
Old video, I know, but it helped so much. Thanks man. Modded my two JLFs with bigger actuators and 2lb tension springs 💪thanks for the video!
@goldoozaru8 жыл бұрын
Thank you! It help a lot!
@Fundando8 жыл бұрын
You are welcome.
@seeindarkness Жыл бұрын
If you ever saw the 5th element you will remember the iconic line: "Aziz light!", because the priest could not see a damn thing, just like myself in this video
@ASAPMarko7 жыл бұрын
i cant get the e clip back on urghhh
@sediqsmith72334 жыл бұрын
Yo Fernando I know I'm late but where could I find that artwork that you have on your work mat in this video? It's the best I've ever seen bro!!!!🔥🔥🔥🔥
@caseyangell94685 жыл бұрын
Thanks so much for the instruction. Bought one of Clayton's removable sticks and installed into a Panthera in a breeze because of this
@ant95006 жыл бұрын
Great vid... switched out my part with ease.. besides the eclip...
@roiad8765 жыл бұрын
Is there a way to replace the switches on the PCB? I want to replace my faulty ones for some Cherry's I have laying around
@Fundando5 жыл бұрын
jup as long as they the same size and connectors are in the right place you could desolder and put in a switch pm the pcb. ALthough it would be probably better to just replace the whole pcb
@Akkbar216 жыл бұрын
Just dooo it!
@doumanseiman26455 жыл бұрын
good stuff
@easygoingdude99905 жыл бұрын
This helped a lot! Thank you very much 🙏🙏
@ShinobiShowdown4 жыл бұрын
I am getting 4 JLFs for a 1up mod. I have to install hollow long shafts for LED balltops so this video is useful for disassembley. I am getting my JLFs from Paradise Arcade too!
@Bulvine420gaming7 жыл бұрын
Flawless!
@Redx22135 жыл бұрын
How do you disconnect the pcb from the pins, also will the reconnect if I get a new pcb?
@Kufuu6 жыл бұрын
Where'd you buy that pink gate? I didn't even know you can get custom colors for those.
@Fundando6 жыл бұрын
Kufuu I just spray painted it with fluorescent paint.
@stephenmiller55726 жыл бұрын
Thank you sir; that e clip had me stomped, but I calmed down and let it cut into my thumb nail to get it back on.
@mel0w2664 жыл бұрын
Thanks for the walk-through really helped me.
@yousini8 жыл бұрын
I think my "Washer" part came unstuck I hear it rattling out and screwed up the board because my TES2+ is stuck to the left, trash madcatz used crap glue or something have to rebuy jlf
@Fundando8 жыл бұрын
just take it apart and take a look.
@theglurgle6 жыл бұрын
Great video, I have an new stick coming along with some upgrade parts, so you see any reason to re lube a brand new stick? Even if I'm swapping spring/actuator?
@Fundando6 жыл бұрын
sanwa and seimitsu always do a great job of providing adequate lubrication, it should not need it
@jackw54307 жыл бұрын
Hi, I'm looking everywhere to buy a single piece restrictor plate like the one you have in this video and that comes with the Silent JLF, but can't find anyway to buy one. Where did you get yours from?
Good video. But please use pliers to put the eclip back on. I can feel the circulation of my thumb cutting off by watching you force the eclip onto the shaft with your thumb
@Fundando6 жыл бұрын
lol yeah
@GR8GUY545 жыл бұрын
Lol. I use needle nose for that part. Good tip on the flat heads screwdriver and turn motion. I always pushed out and forced it. *Pop goes spring*
@CIRCADES5 жыл бұрын
I ended up just using the back of the screwdriver to put enough pressure on it while not hurting a finger.
@whitecastle3236 жыл бұрын
Fundando I like your name can I steal it
@Fundando6 жыл бұрын
Yoda I would prefer you don’t but the internet is huge and free.
@cmendemongaming83415 жыл бұрын
What if i dont have any grease?
@Fundando5 жыл бұрын
cmendemon gaming you need it. Go buy some.
@cmendemongaming83415 жыл бұрын
@@Fundando whats a good kid of grease to buy?
@Fundando5 жыл бұрын
@@cmendemongaming8341 Shin-Etsu is the most widely used and works great. This website sells small amounts as unless you are working on these all the time you shouldnt need anymore than a small amount www.focusattack.com/search.php?search_query=grease
@emkplayboy65 жыл бұрын
Bro you have the best videos when it comes to arcade sticks! So much knowledge!
@CSIG10018 жыл бұрын
How do you know what's up and down and left and right when you reinstall?
@Fundando8 жыл бұрын
just make sure the 5 prong connector is facing the same way as when you took it out. If you installed it wrong for any reason it is not going to hurt anything.