I have a 2017 great machine, looks like the new one has more computer control than mine . Same drink holder that breaks and won't hold a drink. Very powerful hydraulics and smooth without all the computer control , air-conditioning works great.
@ShaneBurrell12 жыл бұрын
Does yours have a split side window or solid?
@RUSTON51EVADP2 жыл бұрын
so air cond is heater or cooler,? texting from ALASKA HEATER MORE IMPORTANT
@In2investing3 жыл бұрын
That left key position is for heating the glow plugs when cold. At least that's the way it is on the 80u and the position is labeled "heat". 35 may or may not have that
@ShaneBurrell13 жыл бұрын
Not sure but it appears the 35 auto cycles electronically. If cold when your turn to start it will auto delay the starter. I bet they used there standard switch. Mine isn’t labeled at all in that position.
@Jason-zp4ly3 жыл бұрын
@@ShaneBurrell1 most every machine that has electronic control will auto the glow plugs when key is turned on. If for some reason the auto glow is not sufficient in very cold weather, you should be able to hold the key in the glow plug position. This manual override is also present just in case the auto glow is not working.
@leftitbythecurb83503 жыл бұрын
looks like a decent machine,well priced, standard finition. that fonction screen would find a better niche just above the ashtray what does warranty look like?
@ShaneBurrell13 жыл бұрын
5 year 5000 hour warranty.
@hpw59 Жыл бұрын
horsepower?
@cutweldngrind2 жыл бұрын
I was looking into a SY26u but this one looks nice. I don't have much need for one but always wanted one.
@ShaneBurrell12 жыл бұрын
My limit was towing. I had a JD27 prior and like the bigger machine. I would have gotten a 50 or maybe 60 if a trailer upgrade would not have been an issue. They are great machines.
@OstiworksExcavator2 жыл бұрын
hello i am excavator operator. now i am using 2022 sany sy35u . Good machine sany
@ShaneBurrell12 жыл бұрын
Nice 👍
@sjohnson92302 жыл бұрын
Excellent video.... I pick mine up this week. It was helpful to see you talk about the instrument control inside the cab.
@ShaneBurrell12 жыл бұрын
Glad it was helpful!
@sanyexcavatorlandclearing64762 жыл бұрын
I just got quoted 42,000 without the enclosed cab. Where did you get yours from? I’d much rather get a cab for 43. Let me know please before I close this deal next week
@ShaneBurrell12 жыл бұрын
Sany has a dealer network and from what I've seen they all have similar prices. I expect 42 is the current price for a non-cab with recent price increases. I purchased mine from Iron Peddlers which covers my area. Most equipment purchased recently prior to parts shortages are worth more than most paid just a year or more ago. Cars,RVs etc are all in similar shape.
@genecoppedge5972 Жыл бұрын
Congratulations I’m seriously looking at Sany in the 35 or 50 model. I’ve been looking at the Yanmar for about a year now until I came across the Sany on the Dirt Monkey channel.
@ShaneBurrell1 Жыл бұрын
The yanmar vio series is a good machine. If you don't have a transport issue with a 50 size machine I always recommending getting larger when possible.
@genecoppedge5972 Жыл бұрын
@@ShaneBurrell1 good advice thank you and happy new year brother.
@BuggysTowJam3 жыл бұрын
Are these about 38k? Just wandering how much a difference they are in your area vs mine. I'm going to find out this week I'm going to ask for one specs just like yours and see what they quote me, how much are you using yous besides your mowing
@ShaneBurrell13 жыл бұрын
With cab they are around 43k delivered. This price likely recently went up some because of global supply issues. I use it for mowing the yard and landscaping around the property mostly. Find myself using it for something at least once a week.
@iceorphen2 жыл бұрын
@@ShaneBurrell1 Is that 43k all in including the buckets you got? I'm getting priced at 51k with thumb, 18", 24", and cabin :(
@ShaneBurrell12 жыл бұрын
@@iceorphen it was but I’m sure inflation has taken effect by this point.
@farmerjoebrown2189 Жыл бұрын
Yea its 50k for no cab now. Wow good thing the power plant pays me more for higher cost of living…..wait nope
@christaylor-mn7yq Жыл бұрын
Good luck if you have any issues with it getting Iron Peddlers to fix it! I have a 2020 sy35u I brought from them in Monroe NC. Right after I bought it the thumb starting leaking down, it will flop when not in use. I contacted them and still to this day they will not fix it! That have the worst customer service I have ever seen! It actually cost them a big sale from a friend of mine due to the way they treated me!
@ShaneBurrell1 Жыл бұрын
So far I haven't had any issues.
@vitaliydiyguy75702 жыл бұрын
So cute just in your voice you sound so excited
@ShaneBurrell12 жыл бұрын
It was a good day. Swapping out a Non Cab no AC JD 27 for Sany 35 with cab and AC.
@TheGaginator2 жыл бұрын
Hi Shane! Great content. I am interested how much this unit cost you? I'm looking at the sy26, for ease of towing.
@ShaneBurrell12 жыл бұрын
All equipment has went up in price since my purchase last year. The sany was about 20K lower than Cat and Kubota if that helps.
@BusyBeaver223 жыл бұрын
Hey congratulations buddy. Looking forward to watching you work with it
@BusyBeaver223 жыл бұрын
I learned a few new things about mine from watching you go through yours. I’m kind of a grip it and rip it guy so I ran through quite a few hrs without knowing what all the button were for. Great explanations. Much appreciated
@ShaneBurrell13 жыл бұрын
It's a great machine. Hoping at some point they enable use of the left hand switches to allow full on and off of the aux flow for the mower.
@Just_Chuck_It2 жыл бұрын
How much did you spend on this excavator? And how did you get it imported?
@ShaneBurrell12 жыл бұрын
My Sany was made in Georgia. There is a USA dealer network and they are made here. Yanmar engines, Italian Hydro. The price I'm sure is elevated at the moment but I paid around $43k.
@OscarGonzalez-py8by2 ай бұрын
Very good machine bro
@douglaswilliams17922 жыл бұрын
The warranty is awesome
@ShaneBurrell12 жыл бұрын
Haven't had to use it yet but glad its there.
@philip45882 жыл бұрын
Can you use DAB adapter to the radio? or change to a DAB radio?
@ShaneBurrell12 жыл бұрын
A DAB radio with bluetooth pairing should work. I have paired my iPhone to the Sany with no issue.
@TF856 Жыл бұрын
I see that they use thin wall tubing to mount the front blade to the base! I hope yours does not break off like I've seen it happen on other jobs. The machines that use solid iron plate are a lot safer. If that blade brakes off while you're sitting on a steep hillside it could be very dangerous. Or if you're lifting that machine by 3 corners when the blade breaks off, look out!!!
@ShaneBurrell1 Жыл бұрын
Looking at it I don't think it's going to go anywhere. Looks very similar to my JD27 I used to have as well as the Vio 35. Do you have specifics on this actually happening?
@TF856 Жыл бұрын
@@ShaneBurrell1 yes I do. We were working on a job at a refinery and a different operator had to cut a trench across the slope so he used the blade to level the machine as he was digging. It was a small Caterpillar excavator approximately the size of a 303 - 305 A few days later I was using the same excavator digging trenches on flat ground and the blade fell off showing rust at the brocken edges. Showing in had probably been broken for several days when it fell off. They had to take the machine out of service and take the broken blade parts off of the machine and welded them all back together with a bunch of reinforcement before putting the blade back on the excavator so that I could continue working. Since then I always notice what kind of material they use on the dozer arms on excavators!!! One dozer arm was broken completely off and the other one was broken most of the way off. I can't believe tractor companies didn't research that area to realize how weak the tubing would be on something like that. Cat uses thick plate steel on some of their models and tubing on some of the others. Anybody who has a machine with the tubing should reinforce it! When it broke the time that I was operating it I was not putting a lot of down pressure on the blade but it still broke from earlier damage!!! The broken areas were at the crossbeam between the two arms that holds the hydraulic cylinder connection. When they welded the dozer parts back together they had to put long pieces of steel plate welded to the bottom side of both of the those arms for reinforcements.
@ShaneBurrell1 Жыл бұрын
Looking at the Sany it appears mostly if not all machine welded. Not sure what may of happened on the Cat machine. I've seen some rust on some grey market machines that had salt exposure but my previous JD 27C and the new Sany the blade is a lifting point and I'd trust them to stay attached.
@joestreeter57512 жыл бұрын
$13-$17,000 cheaper but how much was the machine
@ShaneBurrell12 жыл бұрын
IWith cab they were around 43k delivered. This price likely recently went up some because of global supply issues and inflation. Best to just give your local dealer a call. It's a no haggle price and usually on the machine at Sany dealers.
@equinoxtacticalsupply77322 жыл бұрын
I think those have two travel speeds. Hi/low
@ShaneBurrell12 жыл бұрын
They do.
@Ismael-nv8yw3 жыл бұрын
Where can i find the adapter to go from sany to kubota buckets
@ShaneBurrell13 жыл бұрын
You would really need a new coupler for that to keep bucket breakout. I'm pretty sure werk-brau sells them.
@brokentv30362 жыл бұрын
How much cost one ?
@ShaneBurrell12 жыл бұрын
This was purchased pre inflation at around 43k.
@smitty_12 жыл бұрын
Nice informative walk over thanks but spit that jolly rancher or whatever out.😖
@jasongaumont5099 Жыл бұрын
How much was this machine
@ShaneBurrell1 Жыл бұрын
Back then they were in the low 40's now in the low 50's depending on options.
@pingpong9656 Жыл бұрын
What is the password to get into the system settings? I want to see what the flow rates are set to...
@ShaneBurrell1 Жыл бұрын
No password needed.
@frankortolano5886 Жыл бұрын
Why didn't you say the price
@ShaneBurrell1 Жыл бұрын
It's usually bad practice but it's been a while now and economy has changes. I paid in the low 40's. Same machine today is closer to 50k or just above.
@RUSTON51EVADP2 жыл бұрын
HEATER ??
@ShaneBurrell12 жыл бұрын
It has heat and AC.
@RUSTON51EVADP2 жыл бұрын
THANKS SHANE
@ShaneBurrell12 жыл бұрын
No problem.
@l3eaver2 жыл бұрын
Whats the cost on something like this
@ShaneBurrell12 жыл бұрын
40-80k depending on brand and options.
@robertlipperd7352 Жыл бұрын
Maybe they can start reading some comments before they ask for the 100th time how much it cost.@@ShaneBurrell1
@rontopping20482 жыл бұрын
Looks like a tag coupler
@ShaneBurrell12 жыл бұрын
Buckets and coupler are all paladin . Wain Roy style. From the markings looks like they make them for Sany America.
@rontopping20482 жыл бұрын
I prefer machines built in Japan, sany is made in China. 6k more you could purchase a kubota or takeuchi with much better resale value. Like money in the bank and you get a better built machine. These days equipment holds its value
@ShaneBurrell12 жыл бұрын
I like Kubota and Tak but there has been no supply of those for a while now and at the time the prices quoted were significantly more than 6k difference with a long unknown wait on delivery. I was able to find Deere but not a cab version.
@jonathanbeam68982 жыл бұрын
@@ShaneBurrell1 I'm in the situation regarding Tak.
@ShaneBurrell12 жыл бұрын
@@jonathanbeam6898 The sany is usually available on dealer lots and I don't regret going to Sany for the mini. It's been a great dependable machine.
@robertstephanek7063 Жыл бұрын
Sorry friend! I wanted to know how to operate the machine, not open the windows. This video taught me nothing useful.
@MarkWilliam-pl6qs6 ай бұрын
The Chinese communist party thanks you for your purchase
@Senkino5o2 жыл бұрын
Chinese excavator - dislike.
@TravanonAsh7 ай бұрын
Learn to not say um um um ummm
@ZR1Terror2 жыл бұрын
That machine is from a company based in CHYNA!! No way they are getting my money that way.
@ShaneBurrell12 жыл бұрын
Unfortunately, they will likely see your money regardless of what brand you buy. My particular Sany was made in Georgia. The bucket and quick coupler is by Paladin. Most of the controls and hydraulics are Europe made. John Deere, Case, Agco and all major players have factories in China. There isn't a machine you can buy these days that won't happen with, but at least in the Southeast if you buy a Sany some of that money is supporting a working family in Georgia as they have a major manufacturing plant there in Peachtree City.
@sjohnson92302 жыл бұрын
Well then you prolly won't be buying any new tractor these days. Just saying....
@PEEJ082 жыл бұрын
@The Richest Man In Babylon Kubota as of 2013 is having their engines made and other parts in china. Company name Kubota Engine (WUXI) Co.,Ltd. Location Wuxi city, Jiangsu, China
@cheesse9yearsand2 жыл бұрын
@The Richest Man In Babylon LOL WHAT ABOUT YOUR TV
@justme6275 Жыл бұрын
even F35 has Made in China parts.
@corymartin8102 жыл бұрын
Cheap Chinese Cat Knock off!
@tylersatterfield7309 Жыл бұрын
lol, definitely just pissed you didnt buy it. overpriced cat will not do any better just costs more