I just recently spent the last 4 months restoring a Nintendo Vs. Dual System cabinet all thanks to you. Not only were these videos crucial to the success of getting my cabinet up and running, but your site also contained all the reference literature I needed for future maintenance and upkeep. I gotta keep the wheels oiled and rolling so to speak. I want to thank you for doing what you're doing. You're helping keep this hobby alive and long live the arcade!
@MichioMakes9 жыл бұрын
YESS!! THANK YOU JOHN! I have a Sanyo 20EZ was ABOUT to start recapping/repairing. Your timing for this video is impeccable! I've got my cap kit/flyback/hot from Bob Roberts ready to go. Thanks for the awesome vids man! You are also capping a Unisystem(Which I have). This is so great.
@cindyhobbs64042 жыл бұрын
Hey John I'm not only a Mario fan I'm a true fan of your show
@WinrichNaujoks3 жыл бұрын
I did a cap kit on this monitor's little brother, the Sanyo 18-Z2AB, as found in the DK Jr cocktail table, and it worked perfectly. This video was super helpful, thank you so much! If anyone else is ever going to do this on a 18-Z2AB I recommend putting on the crocodile clips on BJ before you install the board again. It's virtually impossible to put it on there otherwise.
@jonjandran9 жыл бұрын
Good job , gotta love the Sanyo. Just an fyi though, Bob Roberts Deluxe 20EZ Cao kit with audio caps does come with the 2 transistors. I have done 10 in the last 2 months and all the kits from Bob had them.
@onecircuit9 жыл бұрын
Our friendship was forged over a Sanyo EZ capping. :P
@delsarcade9 жыл бұрын
Hey John, Kudos on the PSA at the beginning on the dangerousness of working on a monitor! Now I need to watch the rest of the video.
@MrKevinp09 жыл бұрын
Yup, I watched every minute of it, as always! LOL I have to say, you're fearless my brother! I was cringing so many times while you were adjusting the pots on the PCB. You are a braver man than I sir! Great job as always, John!!
@RetroPhaeax9 жыл бұрын
Love the long vids! Must also mention about when you are freaking out due to the false electric shock... I cried of laughter in a burst so even the missus woke up... Man, that felt good! It was a really good laugh, even so much needed! Thanks John! :D
@DyingPancake9 жыл бұрын
Restoring my first game now (DK Jr) and the monitor is the last thing I need to do, so this video is incredibly helpful. Keep it up!
@Ko03149 жыл бұрын
Love your description. In this monitor we are going to rebuild a Sanyo 20EZ monitor. Monitorception going on there! Great vid big fan of yours!
@superpacman739 жыл бұрын
Sweetness finally can rebuild my Sanyo monitors !!!
@maitreyaandrews39686 жыл бұрын
I know it's a old video, but thanks, I'm brand new to arcade repair and got a VS. Mario with foldover on the monitor, your video gave me the conference to repair it.
@nitegaunt9 жыл бұрын
Looking for that TNT visit! Keep it up John and let's see you break that Donkey Kong score, too. I'm at about 200,000 and I want to see you get past that.
@cindyhobbs64042 жыл бұрын
John I'm a true fan of yours
@vincenzovieri37439 жыл бұрын
That video was great and relaxing at the same time, your great at this stuff keep it up ur a good inspiration man
@raxnahali23392 жыл бұрын
Thank you for putting this up, just getting started on a Sanyo shortly.
@JohnVannoy2 жыл бұрын
Thank you for taking the time to make this video. It helped me a lot
@TMesquita189 жыл бұрын
Your videos are awesome. In fact this one it was the longest I've ever seen. ;) Keep going with the good work, John. ;) Cheers.
@tttopcattt8 жыл бұрын
Great Video John, as always. What do you mean by rejouv, please? Cheers.
@thedarkener7 жыл бұрын
About to do my first re-cap on one of these (Donkey Kong Jr., then Donkey Kong after that). Your video is my study guide. =} Monitor should be dry now from cleaning it w/"Krud Kutter" and hosing it off out back yesterday. Wish me luck, and thank you for (all of) the great video(s)!!! My kid loves your videos too. Cheers!
@Johnsarcade7 жыл бұрын
+thedarkener good luck!
@Johnsarcade7 жыл бұрын
Good luck!
@gb.recordings9 жыл бұрын
Hey John where did you get that shirt from with the Nintendo controllers in the front and in the back it says tech support something I want one I hope you start selling those shirts I like it
@cindyhobbs64042 жыл бұрын
Hey John I want you to do a restoration of a Donkey Kong cocktail cabinet
@joakimglysing51789 жыл бұрын
Great vid John! I've been wondering about those alignment tools (:
@flyguille9 жыл бұрын
The danger of adjusting the horizontal +B in HOT, is that if the pot is scratcky/dirty you can really send peaks to the horizontal output transistor and burn the transistor. I had destroyed some perfectly working transistors that way. So, your advice of do it when turned off is the best advice for everybody.
@BuxProduxshuns9 жыл бұрын
"John's Arcade: The Movie"
@Arcadehollywood9 жыл бұрын
This is great timing John! I am rebuilding 2 of these. For my DKjr and Mario Bros.
@bertinouellet9 жыл бұрын
Arcade Hollywood Me too! I wonder what those transistors are...
@Arcadehollywood9 жыл бұрын
B. Ouellet Good question?!
@don574289 жыл бұрын
Not too long John. I loved the detail.
@sewashburn05299 жыл бұрын
John, the filter on the light makes the picture look great. It seems like we are at the table with you. Have you ever considered getting a die cart or something similar for putting your monitors on when you are working on them and testing them at the game, rather than using a chair? It would be more sturdy and have less chance of the monitor falling off.
@Avery19809 жыл бұрын
great video john and yes i watch every minute of it lol god i tell ya id love to stop by your basement you got alot of kool games id total play :)
@cindyhobbs64042 жыл бұрын
John I'm a true fan of your show I am a true Mario fan
@cindyhobbs64042 жыл бұрын
Hey John my name is Dane I'm absolutely a Mario fan
@joeyclemenza73399 жыл бұрын
i watched the whole thing. i usually run them in the background whole i'm playing destiny. these are always fun to watch, straight up. kind of hope i can learn to do this shit myself one of these days.
@TheNewYorkHustle6 жыл бұрын
Great video. Watched whole video.. what type of solder you use?
@cindyhobbs64042 жыл бұрын
My name is Dane I'm a true fan of yours I want you to do a restoration of Donkey Kong on cocktail cabinet
@Riz23369 жыл бұрын
Man.. Crazy long video. This one is cool for people who want to fix their Nintendo monitors but damn this is like as long as a movie you see in the movie theaters.
@uhfnutbar19 жыл бұрын
John by-pass that stupit inverter board, by running the video signal throw it just adds more components to lower the vides voltage signal ... i find its better to just plug directly in to the monitor :) (all that board for non inverted games anyhow
@MichioMakes9 жыл бұрын
In regards to paint matching, for the jump bug, can you use a close color gloss paint, then use a matte clear coat to knock down the gloss? Is that too many steps?
@williamfick69819 жыл бұрын
Hey John, Is the Nintendo cab going to be a Wild Gunman from Back to the Future 2?
@craiggilchrist42239 жыл бұрын
Try Royal Blue on that cab John. Looks like the same colours as the football team i support.
@DamianReloaded9 жыл бұрын
i got my cup of coffee with milk (a couple of them) and my cookies and watched the entire thing easily. :)
@mylibertycase9 жыл бұрын
John. Why don't you back the camera/light up and then zoom in a tad?
@delsarcade9 жыл бұрын
Ironically, I just picked up a dedicated vs, Playchoice last night. Perfect timing.
@barryismygod9 жыл бұрын
A friend of mine converted an old junk arcade cabinet into a pretty cool TV thing . I think it was a paperboy cabinet that was intact but all the game hardware inside was gone
@branden322109 жыл бұрын
fantastic job when i get working again i want to buy some arcades is there anyway in the future u could a vid on candy cabs from japan.
@cindyhobbs64042 жыл бұрын
Hey John I want you to do a restoration video of Donkey Kong cocktail cabinet
@cindyhobbs64042 жыл бұрын
Hey John I want you to do a restoration of Donkey Kong cocktail cabinet
@cindyhobbs64042 жыл бұрын
John I'm a true fan of yours
@cindyhobbs64042 жыл бұрын
Hey John I want you to choose between a Donkey Kong Cabaret or the cocktail cabinet
@NotWatching6669999 жыл бұрын
It is hard to see the right colors to adjust the monitor. Is there a way to run test pattern? that would help ALOT!!
@DergEnterprises9 жыл бұрын
I've heard of places (Napa maybe) that can custom make spray paint.
@bertinouellet9 жыл бұрын
So what are those those transistors? I'm about to do a cap kit too.
@chriscollier80629 жыл бұрын
Would like to see a side-by-side, split screen comparison of before and after......so we can see the differences; 2.5 hrs later, I can't remember ;)
@TheArcadeArchive9 жыл бұрын
Love the T shirt john 😎
@Flossingame9 жыл бұрын
Hey john are these the same monitors used in a dual monitor Playchoice 10???
@dinkyflix9 жыл бұрын
I always find it easier to just take the entire metal platter off, and then remove the metal lid from the bottom that protects the solder side. Takes less than a minute and goes back on just as quickly. No need to mess with all of the individual boards and wires. -jimbodeanny
@DergEnterprises9 жыл бұрын
I like your transition music.
@cindyhobbs64042 жыл бұрын
Hey John my name is Dane I want you to do a restoration I want you to do a Donkey Kong Cabaret or a cocktail cabinet
@JoeCnNd4 жыл бұрын
My monitor slowly went completely dark, do you think it has a bad cap. I just did a kit like a year ago.
@bmarion09135 жыл бұрын
Hey John - I’ve also got this monitor in an Excitebike, except the green color is missing. It does need to be capped, but I heard you say there’s 3 sets of RGB spots on this setup. Where is the best place to check for this problem?
@AKSnowKitty9 жыл бұрын
John: I've said it in a previous video, and I'm going to say it again here. Don't get rid of the dartboard. You've made it clear in the past that it's a loved part of your collection. I fear if you got rid of it, it'll be a decision that you'll regret.
@jamesraines7985 жыл бұрын
I just got the exact Phoenix that I played as a kid in a bowling alley I think the monitor is fried where would I look to find a used one
@JoeCnNd6 жыл бұрын
My kit came with Resistors and 2 of them said r472, one was 33 ohms and the other 1 ohm. I didn't know the location and if it was a typo and the 33 ohm resistor has another location number if you know?
@nintendoneil9 жыл бұрын
Nice video sir!
@googleboughtmee9 жыл бұрын
Is that big 200v cap dangerous? The bigger the cap is the more scared I am to go near it
@cindyhobbs64042 жыл бұрын
My name is Dane I'm a true fan of you
@Realmasterorder9 жыл бұрын
Thanks Jonhy Nice Phat Video !
@cindyhobbs64042 жыл бұрын
Restoration Dig Dug cocktail cabinet
@Joliie9 жыл бұрын
We did not have those Nintendo games in Europe (at least I never seen one) are they just the 8Bit NES version or improved ?
@Johnsarcade9 жыл бұрын
No, the Vs versions are mostly all a little different. the Pc-10 was the same as NES.
@iyatemu9 жыл бұрын
John's Arcade Game Reviews & Tech I though the VS. also had the NES CPU and 2C03 PPUs in them, the only difference being the games were chipsets rather than on cart-style daughterboards. I think a couple of VS. games have been hacked for NES use (palette corrections ans such) and that there's a Famicom/Red Tent adapter. Please correct me if I'm wrong, though.
@bertinouellet9 жыл бұрын
What are those transistors? I'm about to recap! :)
@cindyhobbs64042 жыл бұрын
Hey John I want you to make new videos in the future
@james425199 жыл бұрын
you never use solder wick?
@JAYWAY19829 жыл бұрын
Careful. Meangreen is not like Simplegreen. Very aggressive and toxic. Wear gloves and a mask. It can strip colors and layers. Great video though. Would like to see more like this.
@MyMac9 жыл бұрын
Nail Polish Remover, which is VERY cheap, works better than Goo Gone. But clean it RIGHT AFTER using it. I use it to get sap off my car, which nothing else does a good job with. Nail Polish Remover gets sap, residue, etc. off in seconds. Seriously, John, give it a try
@lisawarner48589 жыл бұрын
Well done! :D
@arcadeenthusiast4989 жыл бұрын
John's Arcade Game Reviews & Tech Maybe you could help me with something: I am restoring a Donkey Kong Cocktail cab, What certain 13" monitor would work best with this cab? The Sanyo 20EZ? Or else? :)
@Scythe429 жыл бұрын
Woah, 2.5h, need to grab a beer and some snacks then...
@utubepunk9 жыл бұрын
Has anyone mentioned the wobbly table yet? :-)
@TheUniversalEyes9 жыл бұрын
utubepunk People who hate his wobbly table should buy him a new one.
@coolastro9 жыл бұрын
Just notice your shirt lol nintendo tech support nice
@coolastro9 жыл бұрын
Thank You for showing how to cap a sanyo ez look's like a long process.
@BarraNZ9 жыл бұрын
You converting this cab for Brofest? ;)
@theboy1818 жыл бұрын
I have this cabinet but I have jail bars mildly showing. Any ideas? I had a friend recap it last year but I would recap it if that is the issue.
@Johnsarcade8 жыл бұрын
+theboy181 If you turn down the flyback a little does it fix it?
@theboy1818 жыл бұрын
+John's Arcade Game Reviews & Tech I have turned every pot except b+. I think it's cap related however there is a post on this video where another person claimed that he used a different monitor(LCD) and the jail bars still existed. Like I said my buddy claimed he recapped it for me.
@Loggins19699 жыл бұрын
How heavy is the monitor? Seems like you gave it a lift?
@Johnsarcade9 жыл бұрын
not too bad. Just awkward.
@Loggins19699 жыл бұрын
What does a typical stand-up cabinet weigh? Fully functional.. I dont have a big car - so im thinking of shipping cost etc..
@AlainHubert9 жыл бұрын
Great video John, but do you realize that you've said "BJ" nine times from 1:59:53 to 2:00:53 ? That's once every 6.7 seconds for one minute ! What's it called again ? BeeJay ? lol !
@DamianReloaded9 жыл бұрын
BJ yes BJ! There it is right there. Can you guys see that? What I'm gonna do is come in with an aligator clip and I'm gonna hook it on to BJ! Just gonna watch where my hand goes. Let's gonna do this real quick and then pull away. Ahh. Ok, so BJ... it's right.. where the hell is it? Here. Can you guys see? It's so hard to find. It's so hard to see. It's right... Where is it? Right there. See that? THATS BJ!
@QueenFanIII7 жыл бұрын
LOL, and in soldering we also have a slang term called BJ... Bodge Job, when someone f's up their soldering and it's to big and or a cold solder joint, or worse, a ton of hot glue....
@JoeCnNd7 жыл бұрын
You remind me of someone who could have been on g4 TV had it not bit the dust.
@Johnsarcade7 жыл бұрын
Thanks, man!
@c0pyimitati0n9 жыл бұрын
I am getting jail bars on my pcb, but that is on my arcade monitor and when i hook it up to an lcd monitor via cga to vga converter. Does anyone know what might be wrong with my board?
@theboy1818 жыл бұрын
Did you resolve the jail bars I have them too.
@googleboughtmee9 жыл бұрын
2 and a half hours, I need to grab a beer
@JoeCnNd7 жыл бұрын
My Donkey kong machine has a flickering screen. Thinking about trying this.
@ThePunCam9 жыл бұрын
Help John!! I messed with that b+ in an attempt to make my screen clearer and now its just a rippley mess and that adjuster seems loose. Any suggestions how to approach this?
@Johnsarcade9 жыл бұрын
That pot can go bad. Bob Roberts sells new ones.
@ThePunCam9 жыл бұрын
John's Arcade Game Reviews & Tech Thanks!!!!
@LORDMETAL19 жыл бұрын
Come on John you know you're going to turn that into a Mr fix it wreck it Ralph
@Johnsarcade9 жыл бұрын
Wrong cabinet. :)
@compamac9 жыл бұрын
John's Arcade Game Reviews & Tech Will you eventually make a Wreck It Ralph?
@superpacman739 жыл бұрын
LORDMETAL1 Donkey Kong cab for those :)
@Retrocade19799 жыл бұрын
John, where are you ??? Missing your vids... :-(
@Johnsarcade9 жыл бұрын
Soon! :)
@thomascampr9 жыл бұрын
John's Arcade Game Reviews & Tech JOHN!!! Where's your videos man. Miss my john arcade fix. Hopefully 3 videos to make up for it:) If you're sick? Get better. Should have a I'm sick 2 second video. With a sad face.
@JohnMillerwashere9 жыл бұрын
WD-40 works great for removing old decal adhesive
@ricecube1009 жыл бұрын
John Miller it smells though, and the wood absorbs it
@richarddonahue6056 Жыл бұрын
What exactly happens if you haven't watched this video, and you plug that wire into a 120 v plug? Asking for a friend!
@chuck12-829 жыл бұрын
Here is a more scientific way to adjust the chroma and brightness on a monitor using SMPTE bars. en.m.wikipedia.org/wiki/Blue_only_mode Craftymech should def add SMPTE bars to his TPG.
@superrobotfan10999 жыл бұрын
the 20EZ is not that EZ to do a cap kit ? oh boy i need to do my Mario Bros.
@kcase6019 жыл бұрын
John can you give us a webpage or email address for Ethen's cap shop? Thanks.
@Johnsarcade9 жыл бұрын
John's arcade forums
@sonicase9 жыл бұрын
another monitor video? Zzzz zzz
@bertinouellet9 жыл бұрын
sonicase Veeeeeeery important in the arcade hobby. Unless you go LCD... :/