SAT (Self Adhering Technology) TPO Roofing System

Kick-It, Peel-It, Stick-It with Sure-Weld SAT (Self Adhering Technology) TPO Roofing System with factory applied adhesive combining the energy efficiency and durable characteristics that Sure-Weld TPO consistently provides with the ease of installation associated with a factory-applied adhesive. Elimination of solvents makes installation environmentally friendly and odor free, which is key for hospitals, nursing homes, schools and other occupied buildings.
FEATURES AND BENEFITS
• Sure-Weld SAT carries ENERGY STAR®, Title 24 compliance, FM, UL and CRRC ratings
• New and improved adhesive formulation
• Extremely durable, three layer membrane
• Reduces labor and material handling
• Lacks fumes and odor
• Highly chemical and contaminant resistant
• Available in a sheet width of 10' which allows for quicker installation and fewer seams
• Smooth membrane reduces dirt buildup and stays cleaner longer
• A full line of pressure-sensitive and pre-formed TPO accessories are available
PDF Link: www.carlisle-syntec.com/docume...

[@RooflogicCA]

This material is great! Construction and application looks easy too!

[@clevelandroofers5101]

We use this all the time it's a great roofing system. Rooflogic the application is very easy my guys luv it.

[@mark07421]

like the music these guys play !

[@timboxslice9849]

If you would like to adhere directly over an EPDM membrane it is suggested to use a fleeceback membrane and adhere it with a lowrise foam adhesive.

[@HectorGonzalez-ul5gg]

It’s very quick when it’s an open roof like that with no curbs, pipes, or ac units

[@buckJuddson]

Yeah I know right? Haha

[@rodoalvarez5386]

Siempre el mexicano es el chingon en usa

[@johnb7122]

Wow I like that.. Cuts man hours though.. Since no adhesive is rolled onto the ISO board and membrane.. I also noticed no plates were lined down the seam in the field.

[@michaelledford4751]

John B Don't worry too much about losing man hours with peel & stick single plys because they are only good for new construction where man hours are low to start with ,it's impossible to use these peel n stick systems on a pitch or asphalt roof tear off because the dust contaminates the field sheet .

[@RoofingFacts]

@@michaelledford4751 I agree to an extent. The prep work gets extensive after a tear off. Unless you're putting on a thick separator such as I do with board, it can get complicated. However it can still be better than other adhered options. The main factor to consider shouldn't be price but resistance to uplift

[@ColumbiaSC100]

This stuff looks amazing. Is there a residential application for the Sure-Weld SAT? Thanks for well done video.

[@RoofingFacts]

It is made for residential and commercial HOWEVER their warranties for residential are excessively minimalistic and it gets expensive fast

[@ftbrip]

What's the wind upload per floor? temp. it can be applied?

[@silverdragontaylir8252]

What do you do about sides(facial)

[@6sluggo6]

OSHA requires a hard hat as part of your personal safety equipment..Where I come from, ppl. are proud to wear their hard hats in recognition of being a professional in their trade

[@tiffanylee2953]

WHO GIVES A FUCK

[@tiffanylee2953]

Thank you

[@josephbonham4127]

Hard hat doesn't make you a professional

[@RoofingFacts]

Also, most EM regulated sites require a hard hat at all times EXCEPT in areas noted in the Active Hazard Analysis prior. It's good practice for commercial installers

[@natefigueroa]

I was a home builder in the 90s. No hard hats. We had dangerous tools to we were professionals. This is modern bullshit EPA safety bulshit.

[@baylonaj]

No reinforcement (russ) strip?

[@2010Newbee]

here in jersey it cost about 600.00 a roll

[@jr260551]

No Russ strip at the parapet?

[@luillydiaz5719]

jr260551 you attack it against the knee wall

[@future23nj]

can this be applied over an exciting rubber roof

[@mariorobles379]

frank no you have to at least install 1/4 inch secure rock on top of that or use a flies spec roll so you can go over it . Robles roofing company in oxnard California any question happy to ansewar them

[@RRaucina]

Crazy that there is no cant strip at the parapet wall!

[@jimanderson7648]

i know see that lots now with TPO, other rubber roofs EPDM etc . SBS torch down no cant strip . myself im a firm believer in cant strip

[@michaelledford4751]

Hard hats are for professional industrial and commercial roofers & Waterproofers who's company and foreman adhere to OSHA saftey guidelines , All union are required by their company to wear hard hats at all times ,even the country's largest Roofing company ( Centimark ) requires hard hats be worn at all times and they are non union ,only the least professional contractors work without hard hats .

[@MrWadsox]

way too expensive considering the materials.

[@MrFlatroofer]

8 men to lay a roof?

[@alancortez1114]

Not a good product try using this on a cold day you’ll have to wait till summer to be installing this type of single ply

[@leecooper3987]

So this has to be hot air welded at seems? Not glued like tpo?

[@CarlisleSynTecSystems]

Correct. The SAT will stick to the insulation but the seams are heat-welded to ensure that the roof is water proof.

[@leecooper3987]

Thank you & this is a very helpful video. I asked because we had some apartments roofed & the "roofers" used epdm glue, no insulation or slope. They caulked down the boots. Needless to say, it is coming apart & leaking. This is what happens when your "roofers" have no clue!

[@CarlisleSynTecSystems]

Lee, I am sorry this happened! We are glad you found this video helpful...we want to post educational videos like this so that the same situation you faced does not happen too often.

[@pinechopper5096]

I'm a retired roofing contractor. I'm curious as to what happened to hot mop roofing?

[@michaelledford4751]

Lee Cooper as a proud member of Roofers & Waterproofers local 149 I would suggest that in the future you do NOT hire roofers from the phone book or Craigslist ,instead contact your closest Roofers Union local and ask them for contact information where you can speak with representitaves from manufacturers like Carlisle, Firestone ,Versico , Johns Manville ,Tremco ,The Garland Co etc and they will supply you with a list of certified roofing contractors in your area ,you can even have an inspector from these material manufacturers inspect the roofing while it's being installed to assure quality ,and when the job is finished the manufacturer will again send an inspector to check the finished product for even the slightest deficiency and make the contractor repair all substandard work ,if you hire a union roofing contractor it's nearly 100% certain that contractor will be manufacturer certified in all systems they install . On top of being a Journeyman Waterproofer for over 30 yrs im also the owner of 67 rental properties ,4 of which are apartment buildings with flat roofs ,all but 1 building I've installed TPO except 1 and that building required a Coal tar pitch 5 ply hot BUR .

[@dbinpv]

afternoon hail storm maybe?

[@kevincalvo6789]

STICKING IT takes no time at all... gotta time the whole process

[@steveromanelli668]

what the hell are the hard hats for

[@ftbrip]

Well if you don't have work going on above your head then maybe a meteor or airplane not sure so go put on a hard hat it will make you look professional

[@edmundpiechowicz3643]

Firestone gotta better product

[@anthonyman8008]

Lot of waste

[@puprilla]

joke haha glue down that iso roll some on the tpo ..tack...then flop fuck this this no good ass fakery

[@tnelliott2447]

stick with a durable2-PLY Mod Bit membrane, not this pool liner crap

[@matthieu7648]

American construction is ridicule comme french look the real job