Satisfying 3D Printing TimeLapse compilation episode 3 (Prusa I3 Mk3 Octolapse)

[@mehhhhh421]

And people think slime is satisfying. They obviously haven’t seen this

[@doodskie999]

This is better than those satisfying videos that cut things like sand and shit

[@Felahliir]

How do you cut sand?

[@m.sivaprakash5684]

@@Felahliir search for kinetic sand satisfying videos

[@lawrencebarraza9405]

Satisfaying videos is for stress people okay?

[@Kenji314159]

Hey what is the music name?

[@avreclione]

They cut shit??

[@spiderontoiletpaper789]

If only 3D printing was actually this fast

[@jappiemoto]

People are working on it

[@lorintsbranden1237]

Non Existant lol

[@kerbodynamicx472]

In fact that’s what a lot of movies and cartoons show that... And I wondered what sorcery is that when watching

[@suitupchicken3167]

@@lorintsbranden1237 there's a company working on a printer that has taken print time down from 3 hours to 16 minutes they did a ted talk on it its pretty cool

[@lawsonroesch101]

It really isn’t terrible unless you are making something big the longest print I have had was 6 days

[@ColdFuse96]

3:04 That's one hell of an overhang!

[@Stranded73]

Those two 3D-printed machines were amazing!

[@vibezone1207]

This is amazing how well the printer holds up to the overhangs

[@camo6465]

I look forward to the day 3D printing is advanced enough to actually be this fast :)

[@m1rrai155]

xD thw feture is fast

[@loleq2137]

@@m1rrai155 yuo ca'nt spel

[@russellmmo_8454]

@@loleq2137 neter con ey

[@siege_militaryaesthetics]

k

[@crunchykandi]

Camo 64 and have the needle not touch what it’s making?

[@hayleyjoyneil]

This is the most satisfying thing!! I could fall asleep to this

[@thenyancatcookie4251]

Wow, it actually looks like it's growing. Now this is satisfying.

[@AndreaSisto]

The effect when it print is awesome. I liked just for that

[@FullTiltOn]

One of these will go viral! I will be glad to say I was early to recognize your vision and unfound talent at making something as boring as 3D printing an art.

[@WildRoseBuilds]

haha thankyou! to be honest i think the youtube algo ignores channels without ad integration :(

[@diamondminer81]

who says 3D Printing is boring?

[@notnareithofer527]

Clayton Does Hiding From The World I can sit in front of my printer for like hours and watch how it perfectly places one layer over the other

[@JJ-rl3zm]

FullTiltOn 3D printing is pretty fun if you have one

[@masonkj8456]

FullTiltOn recognize deez nuts

[@Zanechr]

The 3d printed toys are amazing!

[@mukundbali5076]

I can't believe I just found your channel. I'm addicted. Probably one of the best 3D printing channels out there!

[@WildRoseBuilds]

Welcome! and Thankyou!!

[@thebeluvdtrex]

If anyone is considering getting one for yourself just consider the difficulty curve. These videos make it all look simple.

[@4-t-558]

2:46 Eevee?

[@WildRoseBuilds]

Yep! Low polyygon Eevee!

[@demogod4955]

A really low poly eevee

[@flamo3961]

@@WildRoseBuilds it's so cute!

[@Artem-nx7iz]

T-5 Yes

[@Phoenix137]

OMG YESSS

[@edamotobenio7170]

Woahh! It's like you're melting stuff but rewinded

[@jaypearce6743]

I'm fascinated by the plier-like grippers. Do you or can you print other shapes that accomplish the same movement?

[@fl0rpi383]

i didn't know i needed this

[@jpsalis]

Do you have it stop between layers so you can photograph it or are you watching the entire thing and waiting for it to finish the line?

[@WildRoseBuilds]

yep, once per layer

[@arry_op2847]

I think it's timelapse

[@andreoka]

Gotta say, you had me hypnotized with the scissor thingy

[@ussrover]

nice video effect getting shot with hot end in 1 location looks like magic printing- Well done

[@WildRoseBuilds]

thanks! :)

[@conanmclucas]

It was using a software called Octolapse i believe

[@ApolloMcrib]

Not worth it when it causes the additional layer lines/banding plus the added time for the hotend to move out of the way for every picture taken.

[@guidodresemann8494]

@@ApolloMcrib : Un-avoidable to get this great video-effect. looks great compared to the video, when the hot end is all over the place

[@vampcaff]

@@ApolloMcrib extra z banding is from a poorly tuned printer and the extra time needed for the tool head to move to take the picture is nominal. I did a thirty two hour print which would have been thiry one hours with out the additional moves. It takes a little more than one second to move the print head between layers.

[@shadycrescent9369]

I'm a 3D printer noob and I looked at this video and I went this is better than a Christmas dinner

[@atomicacid7849]

How do you make it so the extruder is off the print in every frame. Does it move? That must take ages.

[@EpicLPer]

AtomicAcid There's an Octopi plugin for that.

[@Headshotphyco]

A plugin called octolapse for octoprint. I did the math and it only adds about 8 minutes to a 4 hour print

[@Zack_Darce]

Head shot phyco so is it printing one tiny bit and returning home before a picture is taken? and then going back out for another addition and then returning home before the next picture? I'm very curious because the print head (or whatever its actually called) doesn't seems to even get blurry like you exspect with motion in a timelapse

[@PLMlime]

Zack8133 I haven't tried this but from what I understand it prints one layer and then moves to the side for a bit and then prints another layer and so on.

[@Joshua-kn6dq]

@AtomicAcid makeanythig did a tutorial on how to do this

[@thompiraux]

The mini catapult is soooooo funny to watch!!

[@alexandrevaliquette1941]

As requested, here are my suggestions to print: 1. A drag chain for cable management or ornemental chain 2. Complex rotating gear system (heart shape or box shape gear, mechanical working clock with tourbillon, etc) 3. Any Working/moving 3D parts are always awesome to watch! 4. Specialized filament (UV/sun or temperature changing color, Glow n dark, etc) 5. Multiple Changing filament during the impression (stop, change, continue, stop, change, etc) Have fun!

[@WildRoseBuilds]

These are some awesome suggestions and i have stuff lined up for almost all of them!~ Some of it is already shot and ready for next weeks edit ;) I really do appreciate the feedback and cant wait to get some cool stuff out! thankyou!

[@RubyCurveArvizuJimenez-ni6hr]

This is pure stop motion I love it

[@seanzacharyuy7647]

So you let it home on every layer then take a picture? Looks amazing

[@Edumoncor]

Awesome videos!! Your printer's settings are perfect, I want to ask you please tell me this settings, I'm new and I have a sidewinder X1 and I tried to do a time-lapse but the results are very bad, a lot of "threads", sorry for my english, I'm from Spain.

[@WildRoseBuilds]

i'll have a video on this soon!

[@greenygruettgaming2577]

Soon, people will be illegally downloading food

[@zcgamerandreacts2762]

You wouldn't down load a pizza would you?

[@erk1858]

@@zcgamerandreacts2762 don't ask if you know the answer

[@TheGeekFreak39]

Wife: JEFF I'M GOING TO WORK CAN YOU WASH THEORY DISHES WHILE I'M GONE!? :Jeff: ONE SEC IM PRINTING OUT SOME TACOS!

[@rosem3240]

3d printed vegans steaks are possible now actually. Looks like a steak, smells, and apperently tastes like one but its completely vegan. So ya 3d printed pizza isnt too far off!

[@Blobadoodle]

Mmmm plasticy

[@elly7176]

This is so under rated you need more subs

[@WildRoseBuilds]

haha thanks!

[@KC_Aurora]

When are you all going to start particle printing from the atoms in the air?

[@codymarrott5720]

2082

[@Erbsensuppe22]

Amazing! But how do your avoid stringing?

[@gothmaniow]

Im gonn ask again cos this technique looks so cool... How is it possible to make the extruder arm stay still and not in the way of the print as its printing thank you.... Awsome vid

[@WildRoseBuilds]

The extruder parks for each timelapse shot ;)

[@jeremybergman2822]

Essentially, special instructions for your printer tell it to move the extruded to that corner after every layer. It then takes a picture, and prints the next layer, and repeats this to get a timelaspe

[@TrendingPendingVideos]

WildRoseBuilds so instead of 5 hours it takes like an extra hour lmfao

[@jeremybergman2822]

Maybe a little extra, but not nearly that much. I mean, consider that all the printer has to do is essentially move the extruder to a corner and move it back. That takes a few seconds per layer, which, unless you have a 3600 layer print (you don’t) wouldn’t take so long as you would think

[@TrendingPendingVideos]

Jeremy Bergman I only have the monoprice mini pro :((((((((((

[@Mockingbird-sg8vv]

What size did you print the Eevee?

[@wyattsmity7260]

what kind of printer can build something without moving the extruder

[@walkershultz8700]

Squeeks r/woooosh

[@imdatoneweirdo3406]

@@walkershultz8700 r/wooosh to you

[@invetegon4596]

I doubt your being serious, but in the event you are, what it's doing is that the images of the timelapse are taken with the print head in the same location every time. For more information watch this informative video kzbin.info/www/bejne/i6K9aYijarKNe6M

[@fab365_official]

Awesome time lapse!!!

[@WildRoseBuilds]

thankyou!!!! :)

[@donplayzgamez_]

This is awesome! And thanks for doing Venom like I suggested, it looks really good. And I also like that you colored Groot so it looks like a complete sculpture.

[@WildRoseBuilds]

Thanks! And i appreciate the suggestions! I think that one is really interesting to watch!

[@sirpfa]

Beautiful video. Where can i get the 3D mechanism file of the this cork opener?

[@himea9029]

偶に小説とかで聞くセリフだけど ｢限りなく高度に進化した科学は、魔法と変わらない｣ と聞くけど、この映像が1番の、そのセリフの証明になってると俺は思うよ。

[@ItsJustKaya]

Yes, i like mangas too

[@user-tamatama_TV]

えだまめ 連合軍 〜 Allied Forces. 偏見とは思わないけどつまんない考えだなとは思う

[@非リアの美少女]

恋歌 これが、もっと早いスピードで手から作れるようになれば魔法に見えますね。

[@種目鮫]

もっと未来は禁書の魔術サイドもマッツァオな技術出来そう

[@ItsJustKaya]

Nah, hate loli. Only pheddo'sthing :^)

[@MrPomilo]

Wooow the overhang on the venom's tongue is increeeedible 🤤

[@SunnyAustria]

I was also impressed, my cheap any cubic i3 can't do this. The Prusa printers are really incredible machines. One day i get one of these :-)

[@utimelaps1211]

Layer hight? So smooth

[@WildRoseBuilds]

mostly .2 and .15

[@maelo9x]

Hi there amazing video what type of surface are you using to print on that caught my attention can I buy it somewhere

[@WildRoseBuilds]

prusa mk3 bed

[@bluebravoguy1744]

Here before it goes viral. btw that is so satisfying!

[@WildRoseBuilds]

haha! thanks for the support!

[@cbarre9937]

Yes it is

[@Pentalaimon]

I dearly hope that one day this would become real-time speed for 3d prints

[@jonathanmarois9009]

Seen it like this looks like how I would expect Star Trek replicators to work!

[@colinfriend4995]

The Venom one us so cool!

[@PoissonElectriq]

The Venom one is awesome

[@GingerNelso]

The miniature catapult was nice

[@EvOuron]

More satisfying than slime

[@WildRoseBuilds]

haha :)

[@fartpluswetone8077]

My question is where is the nozzle for the stuff?

[@ChunkySteveo]

OK, you've convinced me I now need to get Octolapse installed! Are these taken using the standard Raspberry Pi cam, or a usb webcam (or something else)? Steve

[@toniooinot]

Steve this isn’t an email. This is why *she* left you

[@ArrowverseEdits]

@@toniooinot lmao

[@sharpshootinggameplay7622]

oh man those 3d printed items look so amazing! Great job!

[@LHS1994]

Hi, I am a person who tries many things using 3D printer in Korea. I am curious about your camera. How can you take such a picture?

[@noel.friedrich]

Time lapse timed exactly right so that the printer moves to the side every frame

[@LHS1994]

어떻게 그게가능하죠 별도의 장치가 있는건가요?(How is that possible? Is there a separate device?)

[@youngmaz4328]

@@LHS1994 셔터 릴리즈를 매번 프린터가 눌러주는 방식... kzbin.info/www/bejne/f6SUYZyEaZiIoKs

[@张涛-e8n]

Awesome work!!!!!

[@MrZhefish]

how do you get the stuff stick so well without glue? how do you slice your stuff? prusacontrol, repetierhost? you mind sharing your profiles :)

[@WildRoseBuilds]

i was having bed adhesion problems so i upped my bed temp to 65 and has been good ever since. as for profiles i pretty much use a the stock slic3r profile!

[@MrZhefish]

oh well, i try that thanks, i try that :)

[@Prototyp8]

I just love how the frame rate is perfectly timed got the printer

[@jerillar.924]

This would be a really good video to watch when really high or tripping...

[@WildRoseBuilds]

hahahaha i guess so!

[@nukem1839]

If only 3D printers could print that fast

[@philgamer_309]

Wow..this really is satisfiying

[@WildRoseBuilds]

thanks!

[@satyajeetk.r2923]

The mechanical claw is my favorite

[@indahf.freztiyana824]

That cool purple mecha-pincher toy in 02:01...! I want it so bad... XD Edit: Thanks for the ♥️...

[@antty3380]

Egg

[@JTJS-eh9mp]

Egg

[@alexnguyen1873]

Egg

[@josephdionne8077]

Egg

[@lilmeowmeow9138]

Sperm

[@bamabrad2284]

what was the very firsy thing how did you make it do that the little spirial thing

[@alexandrevaliquette1941]

You found a nice "KZbin Niche", congrat, I do have a 3D printer, and I just Subscribed! It is a very great idea to take time lapse picture when the print head is away. It look like it it "alive"! Alexandre from Québec, Canada

[@lefrenchg]

Alexandre Valiquette how you do that!? 😱😱😱😱

[@alexandrevaliquette1941]

Hola Luis, what would you want to know exactly? How to subscribe or how to do the time lapse? For the time lapase, there is a function in "Octoprint" that you can configure to get this amazing result. I don't have it, but this is my assumption. Please ask the questio to "WildRose Builds" he/she's the one who did this video. Have a look on Octoprint on KZbin. Ciao

[@jerbear0348]

Well your guess is right, it even says it in the title and the description.

[@drkrd]

It's not only a function it's a Plug-in made by FormerLurker and it's called Octolapse. It sucks that it's not even mentionned in the descriptions. the guy works hard on it and implement new features regularly

[@ThomasKranias]

hello, which camera are u using to make these wonderfull timelapses? thx

[@Thrace33.]

I always get over extrurion and struggle to get such clean prints. Any advice please- your prints look amazing!

[@WildRoseBuilds]

kzbin.info/www/bejne/g5PRYpahh51pkJo

[@alexandrevaliquette1941]

Thom Sanladerer is one of the best. I've learned from him and within 2 weeks, I was very good!

[@alexandrevaliquette1941]

First: get a proper fan duck (go to Thingiverse) Secund: Try different fan if the new one is not optimal! Then: If it is not working as expected, lower the extruder temperature or go back to tip #1!

[@Thrace33.]

Thank you for the responses. Much tinkering lies ahead! The filament was printing perfectly last weekend and has just stopped adhering for no known reason (all other filaments are fine).

[@VideoRocketry]

Beautifully done - what camera did you use?

[@sagered8007]

The system era Deva will fix the 3d printing alignment issue

[@Heliocentriciv]

How did you print in mid air like that? My ender 3 pro would start stringing if I even attempted that venom statue

[@WildRoseBuilds]

good part cooling and slow speeds :)

[@idontlikeyoubuti4066]

What if you 3d printed a 3d printer?

[@yoylejuice]

Wow

[@kaushalvyas1142]

Reproduction

[@22Hobbies]

The Reprap project

[@hunsua]

Vemon print with crazy tonge overhang!

[@crispyb9663]

I wish my school 3d printer printed this well

[@elpegachicle6261]

I wish my school had a 3d printer

[@3DFinity]

How did you edit it where the extruder isn't over it? And amazingly satisfying these are really good prints

[@jonjohnson102]

After every layer the print head goes to a set pos, then the camera takes a picture

[@janglewonblin935]

Roses are red, violets are blue, I came for the thumbnail, and so did you 2:07

[@Itiszefurret]

Thanks

[@blackhawk2788]

Oddly satisfying I loved it 😍

[@WildRoseBuilds]

thanks!

[@Oberonsen]

If I had one of those 3d printers I'd have a Xenomorph head on my bedroom wall

[@EveryoneElseIsWeirdImNormal]

So uh hi since you want one and don't have a printer I thought I'd let you know that I have a shop on Etsy where you can get a xenomorph head just thought I'd let you know www.etsy.com/uk/listing/776654757/custom-3d-print

[@JJ-rl3zm]

I have a 3d printer but I see these videos everywhere but how did you print the first one without the nossle moving

[@WildRoseBuilds]

Get the Best Budget 3D Printer of 2022 Here: shrsl.com/3obuu

[@smad333]

A massive cock and balls

[@BunnyFest]

what is the name for that bedding?

[@aimannazmi29]

Mount Everest please

[@jameshenderson5355]

Chewbacca

[@nickw3159]

Ferris wheel

[@hoptoad]

Can you link us to those cool grabber pliers forecep things?

[@jon_raymond]

That was amazing. Thank you.

[@WildRoseBuilds]

thanks!!

[@enriqueraymond2146]

Came looking for what does the object in the thumbnail do. Seen the video and still don't know what does It do

[@vanphan8194]

I'm gonna print my toilet paper Edit: thx for the❤️

[@cbarre9937]

Where is the filament coming from! Ps this is amazing

[@blumonke9079]

*-What the ...-* *_How to make this_* *_Thas so Cool_*

[@deepakmalik2717]

What filament did you use for the first print?

[@力消州]

なんか、綺麗

[@JayRagnamTV]

what painting did you use for adult groot? 3:35

[@DaysPass]

That ending lol

[@MrDman4djob]

Do you print these with supports then edit them out? Or do you just print very slow to avoid defects and overhangs?

[@WildRoseBuilds]

i usually just print full speed without supports and some good part cooling ;)

[@Kashiwa_DX]

GANTZのテレポートみたい

[@スキスキ-t7q]

いずれ人間も…

[@足跡-g7r]

出来たらすごいね

[@SoonerStateSirens1]

柏餅枯木🏳️‍🌈🏳️‍🌈🏳️‍🌈🏳️‍🌈🏳️‍🌈🏳️‍🌈

[@user-dc3ow2vp9b]

わかる

[@bigbencoleman2793]

How much longer does it take for a print doing the timelapse with the hot end out of the way? That is very cool

[@WildRoseBuilds]

adds about an hour to a 4 hour print

[@appanikale2302]

How this is happening Man? it's insane really fantastic and amazing Man nice...

[@WildRoseBuilds]

thankyou!

[@3DIYOriginal]

Hello, awesome video. What camera do you use to record this videos????

[@WHAK]

Это ж надо так заморочатся) чтоб отодвигать головку после каждого слоя) представляю время печати))

[@ayrahonda2994]

WHAK эту функцию можно включить в настройках слайсера и делать фото каждый слой автоматически .

[@WHAK]

ETMOR дак я про это и говорю)

[@yelectric1893]

What slicing software is that? That I fill and lack of stringing looks great!

[@froggers9096]

never saw 3D printing without the machine touching the surface, neither a substance only visible after its dry

[@mohammedfawzikharroub8482]

The iron man head in the video is not the same as the one you shared in the description can you share the one you printed in the video. Thank you

[@Rudium226]

I need a 3D printer!

[@BronyTimeProductions]

Not sure if this counts as necroposting, but I would suggest looking at the Creality Ender 3, it's about $200 and actually has pretty good quality, especially for the price. I've had mine for a little while, a month or two, and I might actually get a second one when I get the chance.

[@Rudium226]

Thanks

[@BronyTimeProductions]

@@Rudium226 Ye

[@debojyotibasu5111]

@@BronyTimeProductions hatt chadarmod

[@fkcabral2356]

Awesome and satisfying 😍

[@Trey-si6fg]

2:36 as soon as I saw that I was like “ *EVEE!* “ and boom

[@WildRoseBuilds]

haha! i have the original 150 burned into my memory. :)

[@mutantclown911]

Love the video def gonna sub. What is the plate your printing on I use glass and glue so it's a pain sometimes

[@WildRoseBuilds]

the pei covered sprinsteel sheet that ships with the mk3