Save multibodies solidworks as parts and assembly

Save multi bodies or cutlist solidworks as parts and assembly
Q 1 -How to fully defined your sketch in solidworks
• How to fully defined y...
----------------------------------
Q2- رسم ومحاكاة وتصنيع CAD-CAE-CAM
• رسم ومحاكاة وتصنيع CAD...
----------------------------------
Q3- ازاى احفظ كل اجزاء الconfiguration
• Save solidworks config...
----------------------------------
Q4-مشكلة عدم ضبط الوحدات بشكل دائم داخل سوليدوركس
• مشكلة عدم ضبط الوحدات ...
----------------------------------
Q5- SOLIDWORKS Hardware & System Requirements
• SOLIDWORKS Hardware & ...
----------------------------------
Q6- Make Solidworks at Maximum performance
• Make Solidworks at Max...
----------------------------------
Q7-Why crash happend in solidworks
• Why crash happend in s...
----------------------------------
Q8-Black screen on New Part in solidworks
• Black screen on New Pa...
----------------------------------
Q9- Adjust your Graphic card & Activate Real view in Solidworks
• Adjust your Graphic ca...
----------------------------------
Q10-Solidworks Convert Spline to lines & Arcs
• Solidworks Convert Spl...
----------------------------------
Q11-Backworks for solidworks to save future versions into previous
• Backworks for solidwor...
----------------------------------
Q12-Fit arrow with dimensions scale in solidworks
• Fit arrow with dimensi...
----------------------------------
Q13-Enable Snapping tools in Solidworks
• Enable Snapping tools ...
-----------------------------------
Q14- الابعاد فى صورة كسور(Fractional Dimensions In Solidworks)
• الابعاد فى صورة كسور(F...
-----------------------------------
Q-15 Solidworks RX عمل صيانة دورية للسوليدوركس
• Solidworks RX
-----------------------------------
Q16- recover a missing SOLIDWORKS Design Library Folder
• How to recover a missi...
-----------------------------------
Q17-Solidworks Files Double clicking doesn't open the file
• Solidworks Files Doubl...
--------------------------
Q18-Reset solidworks setting
• Reset solidworks setting
-----------------------------------
19-Solidworks copy setting
• Solidworks copy setting
-----------------------------------
Q20- Solidworks Shaded Cosmetic threads
حل مشكلة عدم ظهور تظليل القلاووظ بشكل دائما
• Solidworks Shaded Cosm...
-----------------------------------
Q21- SOLIDWORKS Section View makes my model appear hollow عند عمل قطاع مؤقت يظهر مجوف كأنه سيرفيس
• SOLIDWORKS Section Vie...
----------------------------------
Q22-Missing hole wizard oR missing solidworks template
حل مشكلة عدم وجود ملفات Hole wizard او تمبلت السوليدوركس
• Missing hole wizard oR...
---------------------------------
Q-23 Save 3D PDF in Solidworks
احفظ ملفات سوليدوركس 3D PDF
• Save 3D PDF in Solidworks
---------------------------------
Q24-Convert Toolbox Part to a Regular Part File
الغاء ارتباط ملف ال standard وحفظه كملف سوليدوركس عادى
• Convert Toolbox Part t...
---------------------------------
Q25- How to recover a missing Toolboxing SOLIDWORKS
• How to recover a missi...
---------------------------------
Q26- Dimensions font size in Solidworks حل مشكلة عدم تنسق الابعاد بالسوليدوركس
• Adjust dimensions font...
---------------------------------
Q 27-Save &Restore your solidworks settings
• Save &Restore your sol...
---------------------------------
Q28-SolidWorks MOD-DIAM Fix
• SolidWorks MOD-DIAM Fix
---------------------------------
Q29- Solidworks can not move the assembly model
• Solidworks can not mov...
---------------------------------
Q30-فيديو الرد على المشاكل والاستفسارات المرسلة لينا
• ICC Webinar-1
---------------------------------
Q31-فيديو الرد على المشاكل والاستفسارات المرسلة لينا -2
• ICC Webinar-2
---------------------------------
32-Solidworks missing task pane , Head up , command manager
• Solidworks missing tas...
---------------------------------
33-Solidworks forming tools inserted as derived part
• Solidworks forming too...
---------------------------------
34-Show the default Planes
• Show the default Plane...
---------------------------------
35-Solve change Transparency problem in solidworks
• Solve change Transpare...
---------------------------------
36-link material in solidworks Bill of material
• link material in solid...
---------------------------------
37-Download weldment profiles standard in Solidworks
• Download weldment prof...

[@DP-xu2jf]

This video has been a help towards assemblies and parts. Many thanks.

[@AliNasser]

You're welcome.

[@atofficial9957]

@@AliNasser Error failed to save document solidworks save bodies help me! thank you

[@user-fj8fd2nz5w]

Thank you very much. From last year I'm thinking that how to save bodies from a part drawing now i got it easily. I appreciate that.

[@AliNasser]

Best of luck to you 🌹

[@thisandthat7589]

Thank you! I was struggling to figure this out.

[@AliNasser]

Best of luck to you 🌹

[@0beliskas]

When you save it as assembly do parts keep its original places or do you need to mate them together? Looks like cool feature if can check moving mechanism to see if it works as intended in assembly mode since you can't do it when you model the entire thing as part.

[@AliNasser]

The assembly extracted from multiple bodies of part will jut keep its original place and if you need to make animation, you will need to add suitable mates.

[@jebuswookiee]

Thanks for the video - I am just wondering if it is possible to do this for a multi-body sheet metal parts and have them saved out but then also still being able to flatten the pieces. I have been trying to work this out but am having no luck as it coverts them only to Solid-bodies. Any help would be greatly appreciated.

[@AliNasser]

Yes, you can do that but for Flatten you need macro or use isolated techniques. Check out the below links : التعامل مع Macro لحفظ جميع اجزاء ال Configuration kzbin.info/www/bejne/ioDOqnqHZ9aXpNk ... Automatically Convert Solidworks Assembly Sheet Metal To Flatten DXF kzbin.info/www/bejne/n4CoZZatm9qWn7c ... طريقة الحصول على الافرد لكل جسم داخل لوحة الرسم التنفيذى باعمال الصاج kzbin.info/www/bejne/aHK0f6x_hNl0mJI -- Save multi bodies or cutlist solidworks as parts and assembly kzbin.info/www/bejne/d2HZfZqQisuFaqc

[@45jtxditonton85]

thank you very helpful

[@AliNasser]

You're welcome!

[@aviator267]

Brilliant thank you so much

[@AliNasser]

Best wishes for you 🌹

[@sweisslrisschweiis7762]

thank a lot for help me. have a nice day bro

[@AliNasser]

Best of luck to you 🌹

[@mohamednabil5094]

بسم الله ما شاء الله يا باش مهندس ممتاز ربنا يبارك في علمكم

[@AliNasser]

بالتوفيق بأذن الله 🌹

[@DGNG-dd3to]

That is how you do this!!! Thanks for the video! Only one issue I have. I can't edit the exported parts after saving them all. Feature Works isn't showing up??

[@AliNasser]

Your welcome, you can edit the master model and It will effect on the saved bodies.

[@benfrnidhal]

مشكور

[@AliNasser]

الله يحفظك بشمهندس 🌹

[@INGHUSSAMKAMEL]

was helpful. Thanks

[@AliNasser]

Glad it helped!

[@ajesenko]

Thank you. I have a question: I have a 3d model which contains 1000+ bodies. SW detect each one as separate part even thou, many of them are the same. Can I somehow detect same bodies, so I wouldn't end up with bunch of same files.

[@AliNasser]

Hello, You can try to save file as assembly and then control parts as you wish.

[@minhtuyenle692]

Thank you very much

[@AliNasser]

Best of luck to you 🌹

[@ditseyha9462]

Thanks sir.

[@AliNasser]

You are welcome!

[@pako_tube6898]

thank you sir

[@AliNasser]

You are welcome 🌹

[@zoommeeting998]

V v useful video ❤

[@AliNasser]

Best of luck 🌹

[@5g8ohsl]

Thanks 🙏

[@AliNasser]

You’re welcome 😊

[@stefanmarkovic9623]

I must try this,this is so good.. does it work for weldments? :)

[@AliNasser]

Yes it does!

[@Mohamed_zyd]

thank you

[@AliNasser]

Best of luck for you 🌹

[@saykatislam9518]

Thanks a lot

[@AliNasser]

Best wishes for you 🌹

[@redabouassaba5064]

thanks brother

[@AliNasser]

You are welcome 🌹

[@ahmedgerza1753]

بعد إذنك فيه ملفات بصيغة SOLIDWORKS app 2019 مثلا فيه أيقونة bodies ليه مفيش فيها خيار حفظ bodies

[@AliNasser]

اهلا بحضرتك ، ممكن تضيف المشكلة او استفسارك علي جروبنا ليستفيد الجميع وبأذن الله هيتم الرد علي حضرتك facebook.com/groups/ITEHADCADCAM

[@Mustafa-sd2mc]

thanks sir i have a question after saving bodies , when i edit something in the main part , the child part doesn't response to this modify , why this occurs and thanks you one more time

[@AliNasser]

after editing the main part you have to resave bodies again.

[@Mustafa-sd2mc]

@@AliNasser ok thanks my teacher

[@mohamedelnemr8259]

الله ينور عليك يا باشمهندس سؤال بقي لة الفايل step و هوا اصلا solidasm ,و مش معايا البارتس نفسها في طريقو اجيبهم

[@AliNasser]

الله يحفظك، ممكن تضيف المشكلة او استفسارك علي جروبنا ليستفيد الجميع وبأذن الله هيتم الرد علي حضرتك facebook.com/groups/ITEHADCADCAM

[@mansakan9719]

How can a create stepfile of Assembly which have parts saved inside assembly!?

[@AliNasser]

you can follow these steps: Open your Assembly: Launch SolidWorks and open the assembly file (.sldasm) that you want to export as a STEP file. Save As: Go to File > Save As. Choose File Type: In the "Save As" dialog box, select "STEP (*.step; *.stp)" from the "Save as type" dropdown menu. This is where you specify the file format you want to export to. Options: After selecting STEP file format, click on the "Options" button next to the dropdown menu. This opens the STEP Export Options dialog box. Export Options: Assembly Structure: Ensure that "Assembly structure" is set to "Single file". Output Files: Make sure that "Include all components" is checked. This ensures that all parts included in your assembly will be exported along with the assembly. Save: Once you have set your options, click "OK" to close the STEP Export Options dialog box. Save As Dialog: Back in the "Save As" dialog box, choose the location where you want to save the STEP file and enter a name for the file. Save: Finally, click "Save" to export your assembly as a STEP file.

[@mansakan9719]

@@AliNasser thank you brother for your humble explanation

[@Ryohgantz]

Thank you for the tutorial. I ussualy use the "insert into new part", and it's really wasting my time bcs i have to selecting the bodies one by one. haha

[@AliNasser]

Best wishes for you 🌹

[@alishi7ade122]

hi , I have a problem in converting weldment into an assembly the repeated body don't save in the assembly as a repetition, but it's saved as different parts for example the identical legs of a table are saved as 4 parts not as a single part copied 4 tames , is there a solution , by the way Iam using SOLIDWORKS 2019

[@alishi7ade122]

because I need a it so save as a single part for the bom

[@AliNasser]

It seems an issue in solidworks template, try to restore default settings or change this version..

[@kevindarmawans]

Sir, i have a quietion please help me to fix this.. When i want to combine 2 part, there's a message "unable to create single body that is the sum of the input bodies" so i can't combine the 2 part.. how to fix the problem, thankyou very much 🙏

[@AliNasser]

Hello, Try to save original part before that and try again.

[@ammarboucetta9640]

استاذنا، هل يمكن تحويل صيغة corps surfaciques, الي قطعة بصيغة السوليدوركس.تحياتي

[@AliNasser]

ممكن تكتب الصغية باللغة الإنجليزية.

[@ammarboucetta9640]

مشكور استاذنا، لقد ارسلت لك صورة توضيحية من البرنامج، في LinkedIn.تحياتي

[@ahmedabdelaziz5597]

لما باجي اعمل save body بتظهر رساله. Failed to save document ايه حلها

[@AliNasser]

احفظ الموديل الأصلي قبل حفظ bodies,

[@ahmedabdelaziz5597]

@@AliNasser انا بعمل كده بس احيانا بتظهر الرساله دي و أحيانا بيتحفظ البارت بس بيكون فاضي

[@AliNasser]

@@ahmedabdelaziz5597 مشكلة في template, أعمل reset واتأكد إن النسخة لاتقلق عن sp2

[@khaledmoi7198]

How can we do the reverse?

[@AliNasser]

Hello, Using combine or assembly to do that.

[@huseyinelnasen]

الله يبارك فيك بس لو كان بالعربي

[@AliNasser]

ربنا يحفظك ، شرحنها عربي في بلاي ليست مشاريع اعمال صاج kzbin.info/aero/PL4MOa_MJAEeclgd63LFKT-VZ4YVjNVwg0

[@abdoisam3108]

كيف ممكن لو عندي اجزاء كتيرة احفظها كقطعة واحدة فقط علشان عايز احلل في الانسيس بالطريقة حيتحفظو كجزء واحد؟

[@AliNasser]

يمكنك حفظ بأستخدام الامتدادات التالية ؛ Save as: .sldrt .xt .IGS .stp

[@abdoisam3108]

في الحقيقة انا حفظتا بس الأجزاء 555 والانسيس غير قادر يعمل الحاجة دي لانو امكانيات الجهاز ما اقوى حاجة

[@abdoisam3108]

لو قدرتا انزلتو بصيغة IGES بس كجزء واحد لا يتجزأ يمكن الانسيس بقدر يعمل ميش

[@surajprakash3264]

Sir I am new solid work can you tell how to Import A part into A same openet file

[@AliNasser]

Just drag and drop into solidworks or from main menu ,go to file then open and make sure you selected show all files extensions.

[@surajprakash3264]

@@AliNasser thanks sir

[@Salsudi]

is it possible to save to igs?

[@AliNasser]

No, only. Sldprt and. Sldasmbly.

[@Salsudi]

@@AliNasser ok and it is possible to save the list of cuts so that after saving a given element is under x or y in the coordinate system?

[@shekiba.646]

I know SW features > open part but not Assembly can't find open part.

[@AliNasser]

Just drag and drop to open..

[@brunoseromenho9086]

Just out of curiosity, are you from an arab country? You don't pronounce the "p" and there's no "p" in the arab alphabet. That's why I'm asking. Your english is great though

[@AliNasser]

Yes, i am from Egypt.

[@mr.chatreebooncherdchoo2998]

show alert "Failed to save document"

[@AliNasser]

This message seems to be your solidworks version has an issues so try to do like in the below video : kzbin.info/www/bejne/onLJoKJ8jdqbias