Raise exhaust port, widen. Lower intake, widen. You can also check tdc and see if any of the piston skirt is blocking intake, if so just file out a small bit so it's completely unobstructed at tdc. Intake and transfers should be left fairly rough, only the exhaust should be polished. Only surfaces that are exposed to combusted mixture should be polished to reduce residue buildup- the intake is best rough so it helps with fuel/air atomization. Not rough with burrs mind you, just textured and clean.
@Ab.Ga.L4 жыл бұрын
Already ready to come home! Cute seeing kitty in the video 😄 love y'all!
@LAHover4 жыл бұрын
Your Mom is a bigger threat to the cat than Henry now, lol. Hope you are enjoying the vacation.
@ooolalamaam74294 жыл бұрын
2:17- lmfao🤣 mine was a bee, spit that thing out quick. Your videos help a lot man. Well explained, and you are one of the few that goes in depth about your projects. Thanks for your channel, every vid is highly anticipated.
@telluricman4 жыл бұрын
Great info. Look forward to Pt 2. Thx man....
@kimdecastro91563 жыл бұрын
you did a great job cleaning and rebuilding the motor
@chuchein27604 жыл бұрын
That's it I'm sending you my engine and $$ so you can port it! 😂😂 awesomeee work bro!!
@110percentcanadian64 жыл бұрын
Chuchein port work isn’t that hard to do.
@twistedmoto76304 жыл бұрын
might as well try yourself a new jug would cost you the same in shipping
@KenC56mm3 жыл бұрын
The cases looked beautiful!
@BroianNord Жыл бұрын
i love you videos Man the bee/wasp comment was amazing :)
@adognamedbird3 жыл бұрын
Nice. Very nice, finally a quality video for us YD fans 🥳. Sub'd for sure 👍. Gonna have to post me a quick vid of the build 😉🤙.
@ArthronOfFir34 жыл бұрын
Well, nice to see someone actually thinking on not using the yd100, for it's made for with a jug, which is good and terrible for us bike guys. I bought my zeda 80 40³ in December and slowly put my bike together (Schwinn occ stingray) but recently found my stock exhaust pipe cracked, so decided to use the flex pipe till I decided what pipe I need. 36 tooth sprocket is recommended for both engines but if you want to pull more speeds, get an HP carb and put a mid 60 jet. As for plugs, get the br6hs or 7, for 2 strokes need colder plugs. The case matching is the first type of port you want to do actually (and I'm probably going to do soon) before learning advanced stuff. Also get a balanced crank, it removes vibration and problems.
@chevytruckk34794 жыл бұрын
If I could honestly afford to buy a shed for a shop for you I would totally do it!
@LAHover4 жыл бұрын
Will have one some day :) Who knows, youtube ADs might pay of in the future :P We have almost made out first $100 :D
@jameshuffield1755 Жыл бұрын
just can't get enough of your videos man good work. I have learned a lot. really going back and forth on the wc 80 or a yd 100, and if so amazon yd 100? wc 80 seem like a safer bet right now. might have to wait and see how your new wc 80 goes. good stuff. riding a 1990s ish DimondBack. thanks!!
@johnmassy2674 жыл бұрын
Wow.... Smh.. my Yd100 is doing the exact same thing. Im about to put it on the back burner ! I just ordered a New Motor from CMB.( a zeda w/ window piston & reed.. CNC head..I cant wait to see what the problem is & How you fixed it.. Thx for sharing.. always informative.
@LAHover4 жыл бұрын
In the beginning it was the rusted bearing, but at the end of the video I thought it was the cable slipping but it's something else. I'll post a video today or tomorrow when I fix it.
@twistedmoto76304 жыл бұрын
the flex pipe added more torque but slowed my bike down .. normally run it with stock exhaust with baffle removed and i hit 43 with the flex exhaust i only hit 34
@GeorgiaRidgerunner4 жыл бұрын
Well im not surprised about the yd 100 having design flaws im sure it will be revised Maybe in a couple of years it will be better Got busy working on my shotgun restoration video so havent had time to mess with the tanaka outboard yet Hover i hope you check the videos out there on my channel
@franciscoholguin80184 жыл бұрын
Nice clean job 👍
@kyle123673 жыл бұрын
can instantly tell this things powerband is way wider when ported and plished, cant wait to do this with a new 49mm g4 cylinder, i also run a mz65 copy on stock g4 47mm no port and polish no nothing gets 30mph STOCK on stock nt carb
@cliffbradford46792 жыл бұрын
Haha yeah I seen my dad drink something with a bee in it before and let's just say he was just as confused as he was pissed.
@matthew27lamb312 жыл бұрын
Amazon sells new two-piece head has twin spark plugs and jug for yd100 by cdhpower
@LAHover2 жыл бұрын
Thanks for the info! I just checked it out, looks promising.
@damianslusher48363 жыл бұрын
Very good video
@twistedmoto76304 жыл бұрын
i have a 28 tooth sprocket and it seems to do pretty good for me but i don't have many hills where i live or i probably go with a 32 tooth
@jonathanlincolnthefamouszi21372 жыл бұрын
I'm buying a 💯 on the 1st and extra stuff for it
@SpAcEcruizer2033 жыл бұрын
u da man Hover
@tylertillema59343 жыл бұрын
Hell yeah family guy and motorized bikes
@SmokeyVlogs4 жыл бұрын
nice , :P cheers
@engineguyrojo68934 жыл бұрын
Nice video
@DeanCreegerX4 жыл бұрын
Nice video👍
@engineguyrojo68934 жыл бұрын
Nice
@6fiddy3093 жыл бұрын
Dude.. I got stung twice on the lip at the gun range.. I learned that lesson.. I'm just sayin..😂🤣
@jasonsierchio1167 Жыл бұрын
I only get 28 mph with my yd100 with the stock pipe and about 34 with a mz pipe... I want to do port work... do you have any videos getting indepth on it?
@Excalibur250 Жыл бұрын
Not sure where else to ask at the moment but, does anyone know where to get good replacement wrist pin clips for the yd-100, and what size?
@joneserupinsmoke91612 жыл бұрын
Hove ur getting a lil ballsy there where is all the safety gear gone to?
@ericzangl10 ай бұрын
My ydv100 is on its 4 tank of gas "it's new" it's starting to make noise like the piston Rings are trashed but idk where it's coming from.. please help,new to the gas bike life
@kaneto884 жыл бұрын
It doesn't really matters how much of the ports is bellow the piston in BDC. What is important is how much is above them.
@LAHover4 жыл бұрын
It ain't much.
@Ragz10 Жыл бұрын
Watching this I realized I got some powerful stock bikes my first ever engine pure stock top out at 50mph My current one also pure stock (before cylinder got damaged) could go 43+mph and still felt like more to give
@jasonsierchio1167 Жыл бұрын
:O what engine?
@Ragz10 Жыл бұрын
@@jasonsierchio1167 idk the first one was real old generation with all the hardware was philpscrewws
@jacobumble17293 жыл бұрын
Hey i bought an eBay motor kit and a bike cause you gave me the great idea to do this but i didn't make the smart decision. ill get to my question, the chain that came with my kit is the wrong one and in bent a bit so it wont stay on, it also doesn't bend properly around the front sprocket. do you have a chain recommendation?
@johncarley93244 жыл бұрын
Nice video! Are you in the Winfield area? That bridge that you are on towards the end of the video looks familiar.
@LAHover4 жыл бұрын
Home Sweet Home ;)
@drzandlcp4 жыл бұрын
What’s the butt dyno say? Did she get faster?hard to portray acceleration with a go pro. Ba video as usual 🤘
@LAHover4 жыл бұрын
Faster :D
@jacobs-6663 жыл бұрын
What "Zeda KZbin Channel" are you talking about at 8:05. I can't find it.
@LAHover3 жыл бұрын
They faded away sadly...
@tomlingle61682 жыл бұрын
Ever hear of Don Butler? In Oklahoma. Builds engines. On Facebook...
@LAHover2 жыл бұрын
Yes, I have never had the chance to try any one his stuff, but I hear good things.
@Tom-zv9fl4 жыл бұрын
What do you think of the HP carburettor?
@macmotorizedbike38344 жыл бұрын
Stock is better
@Tom-zv9fl4 жыл бұрын
@@macmotorizedbike3834 Too late I've already got it
@heyhihello83103 жыл бұрын
Do you have a link to the new clips you used
@seth33424 жыл бұрын
Where did you get the gasket paper?
@Tom-zv9fl4 жыл бұрын
My bike runs really bad, it spits oil every where and the spark plug is very oily.
@frostyflake1128.4 жыл бұрын
Is it a 2 stroke?
@mrbanana71674 жыл бұрын
Probably way too rich?
@LAHover4 жыл бұрын
What fuel to oil ratio are you running?
@Tom-zv9fl4 жыл бұрын
@@LAHover 40:1
@Tom-zv9fl4 жыл бұрын
@@LAHover I've put the c clip to it's leanest point
@wifeywheeler41243 жыл бұрын
My engine is bogging how can i fix it so i can have more power at full throttle? My name is eric and i have same bike as you the huffy cranbrook with 80cc 44t
@jonathanguillory83214 жыл бұрын
I got mask breath at work an I just drunk some coffee
@seth33424 жыл бұрын
Have you changed the jets on any of your carbs? Or just run them stock?
@LAHover4 жыл бұрын
Only on the Seeutek. But I ended up going back to stock.
Where are you buying spares from? Such as bearings, gaskets, etc.
@LAHover4 жыл бұрын
Amazon.com right now allot of parts are a bit tricky to find.
@joshuayaddowmotorizedbicyc77083 жыл бұрын
Which app do you use for the speedometer and the odometer
@LAHover3 жыл бұрын
cool niks
@twistedmoto76304 жыл бұрын
About to start a channel on my bike im going to break it down and rebuild it and redo my 12v system for all my lights
@sumodeligiannis40734 жыл бұрын
I subbed and I’ll be waiting on your video!! I want to get a motorized bike real bad but I feel like they are unsafe. May you do a vid on how they drive in traffic? Or on the road video and explain how fast you usually cruse.
@twistedmoto76304 жыл бұрын
@@sumodeligiannis4073 well safe is hard term to use kinda depends what you mean. as far as motor exploding or some major issue it's slim. as for something going wrong on the bike it depends if you buy a cheap bike it's not gonna hold up to the torque or the vibration of the engine over time. that is why i got a mongoose mack it's a heavy duty mountain bike with front and rear disk brakes and has mag wheels so no bent spokes or out of place sprocket. so far my bike has held up for 4 years and that's not with me taking the best care of it. as for riding in traffic i don't ever ride in traffic i always ride in the bike lane.. ill have a video uploaded today or tomorrow
@sirjhonson82183 жыл бұрын
I drank a wasp . It stung my lip . Had a fat lip for a couple of days .
@jamesroberts30412 жыл бұрын
Yd100 is got a hole lot of power it will out run the zeda 80 any day of the week well I mint 66cc zeda it. Is what u do to the motor u put money in anything u can make any motor run the most videos i watch they speed run but they don't realize they are going down hill u are going to go fast but I am working on my new build I am making a franklinstain 56mm it is going to be fast that for sure but I love my yd100 good running motor mine been a good one but be careful on the rd hope u get your motor fix
@gamerjrsolo50354 жыл бұрын
Nice vid but i have to watch IT in 144 p my internet sucks
@jonathanguillory83214 жыл бұрын
Is that a1 piece head
@fliows65364 жыл бұрын
Where did you get the exhaust from
@LAHover4 жыл бұрын
Amazon
@engineguyrojo68934 жыл бұрын
How do u remove the sproket bearing
@LAHover4 жыл бұрын
kzbin.info/www/bejne/r6TQnoitgMhoZ7s
@tomlingle61682 жыл бұрын
I want a YD 100
@LAHover2 жыл бұрын
Mine has been good to me over the years :)
@radiowavz4 жыл бұрын
What no red green
@johnmassy2674 жыл бұрын
My yd100 is locked up... it wont engage.. release the clutch
@mrbanana71674 жыл бұрын
Check what is locking it up, then look up or ask how to fix it, nobody can tell what is locking it up without any info
@freshjuice93524 жыл бұрын
Is yanking ok the throttle like that ok for the bike? Seems like you could build up a lot of pressure that could bend some valves. Same thing happened to my brothers 4 stroke bike.
@Jacobtheunwise4 жыл бұрын
2 strokes don't have valves
@LAHover4 жыл бұрын
What he said. These little motors like to rev.
@itsjustjbuildingstuff48204 жыл бұрын
Stihl ms440 top end would fit that bottom end. Just saying.
@mflbikes18704 жыл бұрын
No it doesn't
@redditman37013 жыл бұрын
Why you always peddling?
@LAHover3 жыл бұрын
Lol... Out of everything in this video and you want to know why I pedal a bike? Because it's still a bike ;)
@mjsmjs79053 жыл бұрын
Wow and so people run those engines with no air filter at all, say they don't have any problems
@joneserupinsmoke91612 жыл бұрын
Lol cat like getting ripped off gas fumes 🤨
@CODQueef4 жыл бұрын
I can’t for the life of me getting my YD to stop 4 stroking
@dtotheponcharo3 жыл бұрын
adjust carb needle to top notch
@CODQueef3 жыл бұрын
@@dtotheponcharo yeah ended up getting some jets the .67 took care of it and my clip is in the middle of the needle , no 4 stroking!
@motorizedbikefun69203 жыл бұрын
Why dont dirtbikes get destroyed like that. I wonder. They see more mud than you do!