I BOUGHT X2 CRASH DAMAGED CARS FOR THE PRICE OF x1!

In today's video I bought x2 identical crashed Audi TT's and made x1 good one out of them both, but was it worth it over just buying parts to repair the one car? lets find out...
Big thanks to Airbag service for the quick turn around.
www.airbagserv...
Instagram: saving_salvage

[@mickbowler9111]

Move to Ireland, weathers more consistent... it just rains 😂... great project and vlogs 👌

[@tonypotter5589]

😂😂

[@noelcahill6707]

And its cold

[@hubertturowski228]

It’s so depressing actually.

[@juliom6260]

😂😂😂😂😂

[@JayNShelley]

Sounds like North Cornwall 😂

[@DGDJI]

Ahhh, this just made my day a little better. Love watching your videos, gives me a few minutes to detach from reality. Thanks fella

[@SavingSalvage]

My pleasure bud 🙌🏼

[@SP-ot4wc]

@@SavingSalvageyou need a gazebo outside mate. Keep up the great content

[@N51NR8.]

Great work Dean 👊 congratulations on the 200k subs. Been following you from the early days your content just keeps getting better and better 🤟

[@mrjones9915]

Great video and well deserved 200k subs, Dean. You’ve earned it through your knowledgeable and hard work! Bravo!

[@Carlos.G]

You can use a steamer on the headliner to straighten and get creases out existing headlining

[@antonynoon5325]

Great to have every part at hand instead of waiting. Top videos Dean.. keep them coming

[@LucasOQ]

20:50 Hello, just here to say that the clockspring does NOT have wires inside otherwise they would brake every time you turn the wheel. If you turn the clockspring the car will think the wheels are turned and whenever you actually turn the wheel you’ll get an airbag fault and the power steering won’t work.

[@georgedaville4662]

Well done on 200k Dean, been following you for a few years now. Still haven’t forgotten your first v8 rebuild on the RS4! That was scary moments stuff 😳You have moved on now and rebuilding VAG V8’s and S5’s is old hat. I like your down to earth analytical approach when working on these motors. The adoption of prefab wiring looms is also a great help when doing these complicated rebuilds. Great stuff Dean.👍🇬🇧😎

[@seanwatts1019]

Being an owner of a white mk 3 tt myself found this build fantastic, great content as always congrats on 200k subs, did post this build on tt owners club, nothing but praise on there for your channel 👍

[@DjPrimeberry]

Always an interesting show! I’m a personal fan of the TT… Glad you have managed to save one at least!

[@Mk5rabbit]

In order to get the button out. If it happens again Take a small pick and pull out the button, fully extend the button, and put the knob back on. Easy way if you don't wanna break down the head of the shifter!!

[@rezz6553]

Don’t forget to factor in the extra labour of stripping down the parts car though 👍🏻

[@vadeka]

there is the benefit of having all the random clips and brackets that are often missing when buying loose parts.

[@tonydixon2684]

That's only 3-4 hours max, worth that for having everything there ready instead of waiting for it to turn up. Plus as mentioned above you get the added benefit of having all the clips/bolts etc you may end have missing/broken

[@neilmacdonalds]

Great video Dean. I’m now going to have a lie down. Knackered watching you doing all that hard work!!!

[@steveegginton535]

I first found your channel during Lockdown days - always enjoyed your projects and builds since then, love the variety of the stuff you do👍Many congrats on the 200k. This has been a great mini-series and the finished TT looks amazing good bit of profit and a nice car for someone.

[@phillipdickenson-nl1xc]

Hi Dean I have been subscribed to your channel from the start and I love your videos and a big congratulations on reaching 200,000 subscribers just keep going forward Thanks Philip

[@SavingSalvage]

Thanks so much!

[@MrHuismeester]

Nice project with a nice profit at the end ! And the Weather....we are sailing in the same ship here in The Netherlands and can imagine the stress.....Nice video with a beautiful car in they end !!

[@raeezpather7058]

Congratulations on the 200k subscribers Always great watching your videos Watching from South Africa 🇿🇦

[@brian623]

Love this channel could watch it three times a week, no problem nice person nice family everything good

[@kokoeteukpong8211]

Great video, I really enjoyed watching this one

[@glenmeyer5079]

Great job Dean. You have patience to work on Audi with all the plastic pipes.

[@jerehada]

Some sort of Vag dissassembly guru.

[@Tyronnster]

Want to say congratulations Dean. The work you have put in the channel and constantly learning and growing. Should be proud buddy. ❤ Old school subscriber

[@Tyronnster]

One of the things love about the channel is not all the good stuff. You show your a "normal" person an make mistakes.

[@StephenParry-b5e]

You’re a hero, don’t think I could cope with the amount of problems you encounter

[@jokerash]

8:28 just be grateful for the weather, I am in Eastern Europe and we have 37-39 degrees C here without any rain and it's just 19 June....

[@daveysmith7580]

Congratulations on the 200k subscribers. Well deserved.

[@SavingSalvage]

Thank you very much!

[@cilleneconnolly6569]

Brilliant series as always Dean, would love to see a B9 A5 on the channel

[@daverobinson3816]

Arsehole bolts……. 😂. Made my evening. Great pair of videos. 🙌🏻

[@TheMondeozetec]

Don't forget to take the front plate from the rear ender as its now on the front ender TT

[@iceinterior1234]

Enjoyed this build and a decent profit for the hardwork. Great to see the channel and following building.

[@djstangerdude]

Still the best intro even for the second time! great video as always! Fun to watch! Congrats on 201k subs!

[@darrenjones9504]

Great mini series Dean 👍👍

[@chrisdavidson9431]

Great video Dean, a very interesting watch. Nice little TT at the end of it too - someone will be very happy with that - keep up the good work 👍

[@adrianowen6524]

Hey man congratulations dean 200+k subscribers man good going mate very good achievement fella for real it's been a great journey watching you getting or rebuilding these cars back to new or better infact Dean, nice, you do a brilliant job mate keep it up mate awesome at your work and interesting to watch to nice one mate!. 👌✨👌✨👍👍👍

[@SavingSalvage]

Thank you mate 😊

[@ImmersiveGamer83]

Very good video, I respect people that can work on cars in the modern era. Super clean outcome and a fair price at the end.

[@SavingSalvage]

Thanks! 👍

[@MrRedfreds]

time to invest in a pop up canopy, another great video and congratulations on hitting the 200k plus

[@SavingSalvage]

Would just blow away 😂

[@Slarty_42]

Great work as always Dean!

[@SavingSalvage]

Thank you! Cheers!

[@WilliamStevens007]

Some brilliant progress today Dean, Well done. Congratulations on the 200,000 subs as well.

[@raysteven624]

Brilliant exercise, showing if you know what your doing the savings and rewards are there. Time for another rs5 or rs6 😊

[@williamclay5615]

buying 2 cars to make one has always been the best option in my experience , the resale of the remaining unwanted parts often makes it very viable

[@clementwoods7177]

Interesting project, another great effort Deano.

[@scottdc6971]

This brings back so many memories of me doing a 2019 tts. If you think the dash was difficult, wait until you do the headlining! 🤬

[@carllamb6711]

Great content, Dean really enjoyed following this lot of hard work as you said mate but paid off in the end. Thank you for sharing this with us.😊😊

[@michaelstevens7533]

Can say I've definitely enjoyed watching this one get done. Done good on this one

[@liamcinq]

200K subs! Congratulations, I've been subbed since the Mustang days.

[@mxmajola4283]

Congratulations Sir, beautiful work & beautiful car, my favorite brand. MX from South Africa here. Wish it was mine.

[@GingerJ73]

Great mini series - love a TT and white is a great choice. Awesome job as always 👍🏻

[@davidstocking1622]

Great job Dean. Nice TT for someone that. Lots of graft involved in that swap. Congrats on 200k subs. Channel going from strength to strength.

[@SavingSalvage]

Thanks 👍 😊

[@hashimh8685]

You know you have made it or hit the sweet spot when I watch your videos!

[@andrewjohnson9896]

Another wonderful video.

[@f1kwa399]

Great to see everything working out well, don’t forget to re-gas the a/c, hope the EV is going to be a success too🤞

[@markburns2545]

Looks stunning 😍...am super impressed...top job, and top vlog....congrats 👌

[@PuddingPeep-fs1kw]

Great series, congratulations on 200k subscribers !

[@PhelloMofoka]

Great work Dean... You such an inspiration, all the way from Lesotho

[@feikesietsma9132]

I like your videos…..iam watching from Amsterdam….its raining in Hollland for weeeks😢

[@teamemusrcreviews3225]

Yeh I really liked this series!!! Another please👍👍🚗🚗 I’ve just bought an S4 2010!plate avant, 3.0l supercharged, its awesome 👍👍🚗🚗

[@Dalbayob69]

And you could make even more profit if you had sold the parts yourself from the breaker car, but in your case I understand that time can be soent doing more important things. Still a good profit and solid car with just bolt on repairs.

[@SavingSalvage]

Yeah 100% I don’t have space or time though unfortunately

[@kam_uk]

I wish I had Dean's skills.. 👌🏾

[@anthonybarrett2342]

A great video but I missed the over all out come with the labor cost and sale of the first car.Also if anyone without your experience working on Audi cars should be warned that suicide may seem surprisingly reasonable as the nightmare continues.I learnt a very long time ago never buy a German car they are designed to cost the poor sucker that buys them as much as possible.Germany learnt from Henry Ford and multiplied his idea magnificently.

[@johnelbro127]

Great job Dean. Well done. 👍👍👍👍

[@MarkyMMP]

Awesome. Enjoyed the project thank you.

[@SavingSalvage]

Glad you enjoyed it!

[@Dubb1000]

Great video as always, you need a large marque so that you can work in poor conditions if it's an emergency.

[@derbyjohn972]

Been watching the channel don't really comment. But Dean absolutely amazing work again made it look easy 👍🏻👍🏻

[@SavingSalvage]

Thanks 👍 it was a long slog this one!

[@ppcsl]

Who's the strange guy walking past in the background at 26.23? Just had to pause and rewind lol looks like they have a strange taste in hats😂. Excellent vid again though, you have amazing drive to get stuff done. Nothing stops you great attitude to life.

[@AI-Records24]

Also because we mainly do sub 5k cars we often buy 2/3 and donor cars I once did 3 repairs from one donor (front, rear and side) and still got 1200 back for the shell, cats engine and scrap which was more than I paid for it

[@joejones601]

i wish i had your Energy and Determination m8...your some boy Cracking Video

[@SavingSalvage]

Thanks 👍

[@richardjamesbennett138]

Well done bro with the channel subs

[@charliemcmurray1732]

They keep mentioning the labour of stripping 2 cars but, what about when you’ve to travel to go collect parts which could be a full day of driving? Saves fuel and time

[@sleepysamk1400]

Wow I’ve had a eye full of of TT’s for one video 🤣🤣🤣🤣🤣

[@eddieblaber1009]

I really enjoyed these videos ,great content very clever guy .

[@Gzxs]

Been subbed since 25k! Good to see on 200k now 👌🏼

[@Jasonj___8]

Cheers Dean, great little video 👍👍👍

[@paulmoore6345]

Interesting enjoyed that even if you are fed up with tt interiors now!

[@SteezeMcQueen]

congrats dean always look forward to watching your vids as i dont watch tv

[@chrismonty69]

Respect to you Dean as that interior is a massive pain in the ass.

[@zaznamk]

thanks for great videos. could you tell me which diagnostic tool do you use?

[@plasmaDave]

Sitting here in a very dry and sunny winter in Queensland envying the ran. We are human we are never totaly happy 😅

[@kleemanjad]

Great rebuild dean. Would be great if you can save them both

[@JohnMackay-w6o]

Loved the vids great wee series well done big man and a nice wee profit !😅

[@andrewmarriott4033]

Great build congrats on the 200k 👍

[@ainteasybeingwheezy]

200k !!!! nice one Dean iv'e been here since it was just double figures and a couple of Lurkers

[@SavingSalvage]

Awesome! Thank you!

[@MobileValeterStirling]

Youv got the nack for making videos also bro ❤🎉

[@AI-Records24]

You had the air con gas “recovered” wink wink😉I also have it recovered😉by the atmosphere

[@stephengreen9663]

Always love deans vids. I admire his knowledge on vag. Just wondered if its possible to retro fit a virtual dash to a c7.and would I need vcds

[@jeffshaw4553]

Well done dean looks amazing

[@andypag1071]

Enjoying your videos. Why not repair the seat belts yourself? Seems like an easy enough job.

[@runningvalver]

So £1200 later I have the Phaeton. Get one, they are cool. Nice market to tap video wise.

[@zzhughesd]

That crash !!! Unsure my wooden acting skills be any better. Sure made me laugh the sterling effort !!!!!

[@janklaas3242]

Scary that the guy at 26:23 suddenly disappears. He has smt funny on his head.

[@TheMondeozetec]

Dean I love the channel and have nickname for you 'bernard' as bernard Matthews ( of turkey fame if ur old as me 49 ) used too say beautiful

[@mclarenjohnf1]

Nice job Dean and point proven.

[@mattbarnes7526]

200k! Yes Dean 🎉

[@72neillyboy]

Nice wee project series 👍👍

[@mariebrady4625]

Your a grafter pal fair play to you fortune favours the brave well done dean top man

[@neilgorin1037]

You said you'd missed something - air con extract and recharge wasn't in the costs. Good job though.

[@paul29961]

In the costing don’t forget your labour is double with the parts car.

[@RumpleXstillXskin]

Get in DEAN !! 200k con grats 💪💪💪

[@richardisaac1957]

Great job again Dean...

[@markhall0670]

love it . hope you have'nt given up on the TVR

[@ianhoughton3349]

Was the repaired one registered or clean title now ? Your skills are awesome you know your vag motors

[@deanharriss2029]

Brilliant Dean.

[@ambitiousautos1064]

Also, remember paintwork probably would have been needed if you hadn’t managed to find the right colour parts