sawing 6x6 s

[@dennisworkmansr.714]

I just happened to come across this video from 2 years ago that was about the time i started watching your videos, what a difference 2 years has made

[@kingdomofspeed8390]

Fascinating to watch both Mark and Eddie working the mill and the building construction. Watching from the AZ desert. Thank you for the channel.

[@markgalicic7788]

thanks for watching.

[@williamjohn8404]

Great to see the larger picture,makes your show even better.Thanks for your time boys.Kind regards from U K.

[@markgalicic7788]

thanks , we just changed the editing program .

[@jagdishprasadkhaitan4815]

Lovely superb Nice sawing

[@lewiemcneely9143]

Thanks, Mark and I was worrying hard about that taper but knew if you caught it and had 6 or better on the thin end you could fix it, and you did! Good looking lumber, excellent running bus motor, always up to the task THE Eddie Horvath, marvelous sawyer and if anyone is aggravating you about going faster or whatever, just tell them you're not cutting production, you're cutting PreCISION! And things get goofy when the timber is froze solid. Saws can do all matters of strange things. Best to do like you did and go slow and easy. Getting done with no holes in the roof and no blood and hair on the floor is the order of the day. Yall got my vote and have a MERRY time on wednesday! GBWYall and we're ALL blessed out the kazoo!

[@markgalicic7788]

hey lewie hope all is good ,will be working on the building this week . hope to get the bus motor out of the weather soon . "merry Christmas "!

[@lewiemcneely9143]

@@markgalicic7788 Thanks, Mark and yall stay as warm as you can and the bus motor will be eternally grateful and Merry Merry to Yall as well!

[@daleolson7205]

I could sit here and watch you turn round things into square things all day! Have a Merry Christmas!

[@markgalicic7788]

thanks Dale & Merry Christmas!

[@craigwillenborg1831]

From the sound of the headrig you did a great job aligning the mill.

[@markgalicic7788]

yes Craig it took some time to dial it in but I do have some track issues to fix . thanks for watching .

[@koolaskoalas]

Really appreciated seeing all 3 posts being produced , My Dad and I could watch ya all day every day , logs sawdust and lumber way better than watchin tv. All the best to ya's for the holidays

[@markgalicic7788]

thanks & Merry Christmas.

[@bobsanders2353]

To you Mark and Eddie the Very Best to you and yours in the New Year. Really enjoy your videos. Bob in Desbarats. Ontario

[@markgalicic7788]

thanks Bob & Happy new year.

[@ronmack1767]

Enjoyed the video Mark. Thanks for taking the time to produce the videos. I wish y'all a blessed Christmas from North Carolina. Y'all take care and God bless.

[@markgalicic7788]

thanks Ron & Merry Christmas.

[@williamellis8993]

I had to watch this one since it was before I subbed your channel, Mark. It's amazing the progress you've made in less than two years. Bill

[@shawnbliss]

I enjoy your videos I live in Wisconsin and worked at a few mills when I was younger I will always have sawdust in my veins I love the whole sawmill experience keep up the great work and also like your green laser

[@harryellingsworth8302]

Merry Christmas Mark and Eddie, keep on sawing, next year.

[@markgalicic7788]

thanks Harry & Merry Christmas.

[@davetartler8546]

Some nice weather coming up for ya Mark. Another great video.

[@markgalicic7788]

thanks Dave & Merry Christmas.

[@jimamccracken5783]

I like the remark about touch screen mills. That is so true skilled men do not need touch screens. And I don't see any half-dressed women running around showing their booties either. Just needed to say that Mark and Eddie all the best to ya both.

[@jimg2553]

Looking great Mark. Merry Christmas to you and the World.

[@markgalicic7788]

thanks Jim & Merry Christmas.

[@craigevery838]

I love these older videos because I can see the saw dust chute.

[@jbbrown7907]

So much better! We can watch the sawdust.

[@slhasebroock]

Merry Christmas and Happy New Year! Enjoy your channel!

[@markgalicic7788]

thanks Steve & Merry Christmas

[@michellehoefer5922]

Thank you for the video.Like the way Eddie flips the board over-''Slab it or keep it?''

[@markgalicic7788]

thanks Michelle & Merry Christmas.

[@jgalicic]

Good job on the video editing Brother ! Looks great !

[@markgalicic7788]

thanks brother , lots to learn !

[@paulacton-phillips5560]

I follow your videos with great interest from Jersey (the old Jersey) where we have no timber industry. I would love to see how you chaps deal with the offcuts to make useful products.

[@markgalicic7788]

this wood went into the sawmill building

[@paulacton-phillips5560]

Many thanks for your swift reply. Its marvellous that there you are somewhere in the US, and I can sit on my little island watching you at work.

[@dannyfoshee2292]

your voice and the buzz of the saw caused me to lay my head on my desk and take a nap.lol.

[@Z-Bart]

Mark, i had a thought. Have an index card in the cab with a big T on it. If you run taper the T is up. Taper out, T card turned to blank card. I'm an idea guy. 👍

[@markgalicic7788]

thanks Ray , I want to install a light in the cab to tell me a tapper is out.

[@wyrtwister4260]

The bus motor seems to start pretty well . :-) Wyr God bless

[@leonardfox5188]

I dont mean to be offtopic but does anybody know of a trick to log back into an instagram account..? I was stupid lost my password. I would love any tricks you can offer me.

[@augustrodrigo6177]

@Leonard Fox instablaster ;)

[@leonardfox5188]

@August Rodrigo thanks so much for your reply. I got to the site on google and im in the hacking process atm. Looks like it's gonna take quite some time so I will get back to you later with my results.

[@leonardfox5188]

@August Rodrigo It worked and I now got access to my account again. I'm so happy! Thank you so much, you saved my ass :D

[@augustrodrigo6177]

@Leonard Fox glad I could help :)

[@santaob2439]

Well, yawll have come a long way since last December. To you and Eddie and your families and crew, a Merry Xmas and a Happy New Year.🎆🎊

[@markgalicic7788]

thanks Santa , Merry Christmas .

[@kennydean4512]

Mark I wish I lived closer so I could come and help you and Eddie at the mill Eddie seems to be a man of very few words,but I know he is a hard invaluable worker, love your videos, love the sound of a sharp blade cutting through logs and also the aroma of fresh cut lumber You and Eddie and your families have a very Merry Christmas and a prosperous new year, Oh by the way, I think you stated before, but will you be adding heat to the building when you are operating the mill?

[@markgalicic7788]

yes sir Kenny would love the help thanks , Merry Christmas.

[@themole1944]

Once again happy christmas toboth of you and your family,once again a speaking part for Eddie (Lumber relocation engineer) Champagne fellas the best.

[@markgalicic7788]

thanks John & Merry Christmas.

[@SandBoxJohn]

I don't care what what you say, every log cut on that saw is a beautiful log.

[@markgalicic7788]

thanks John & Merry Christmas

[@allenlaidacker]

Great job wish i was there to help. Weather is good in NC

[@markgalicic7788]

we are in a warm pattern 52 for a high today.

[@mlt6322]

Just curious, what do you do with the smaller scraps too small to make boards out of? We have a pallet repair shop a few miles from my house and they make a killing converting their scraps into wood pellets for wood stoves and selling them at local hardware outlets.

[@markgalicic7788]

we make firewood.

[@Kmecha84]

Good job on the sawing and I like what you've done with the camera, is it on a stand cause it does a good job. The view looking at the blade could be tweaked to the right a bit but great job!

[@markgalicic7788]

thanks.

[@davidturney9813]

Hats off to MR. Eddie H. Merry Christmas

[@markgalicic7788]

thanks David & Merry Christmas

[@lewiemcneely9143]

@@markgalicic7788 THE Mr. Eddie!

[@rcknross]

glad to see eddie has quit smoking

[@trailrider0194]

I've made that same mistake with the taper rollers on my Woodmizer. It's easy to forget what you did on the last cut when your mind is on the next one. I don't know why you said that last log was ugly. It wasn't ugly just had a lot of character.

[@markgalicic7788]

yes it is , I need a light to come on when a taper is out .

[@TheVideoSteve]

Another nice addition to the mill would be a waste board chipper.

[@markgalicic7788]

we cut the slab wood up for firewood

[@lewiemcneely9143]

@@markgalicic7788 Slabs burn GOOD!

[@jvt201]

Inn last three logs you are making more firewood than timber? Are these three logs free?

[@markgalicic7788]

you are a better sawyer than me Jay.

[@bunkhindman3241]

Just asking why are the big ends removed with a chainsaw instead of running the saw todo it?

[@markgalicic7788]

easyer.

[@bobwoodhams7242]

I would forget the tapper to.... it happens...lol

[@markgalicic7788]

yes its very easy to forget Bob , lucky this was a junk log.

[@141poolplayer]

Merry Christmas fellas. This was in my recommendations today so I watched it and was wondering what state you guys are in. I'm guessing NE OH or NW PA. Looks like where I live.

[@markgalicic7788]

thanks & Merry Christmas , we are in pittsburgh PA

[@141poolplayer]

@@markgalicic7788 OK Mark, I live near Youngstown, Ohio. 1 hr from Pittsburgh.

[@markgalicic7788]

@@141poolplayer if you get out this way stop by

[@silverknight1044]

What you need next after the building is done is a conveyor to take the junk stuff to a wood chipper.

[@markgalicic7788]

we cut the slabs up for firewood "good free heat "

[@mikemike2864]

was wondering what kind of lighting u will be using?

[@markgalicic7788]

we hope that some LED lights will work.

[@lewiemcneely9143]

@@markgalicic7788 DAYLIGHT hopefully. Yall have enough to do without after dark too!

[@crownvicky]

Do you have much trouble with rocks in or on the logs?

[@markgalicic7788]

no just metal.

[@horsebranchsawmill82]

What engine do ya have on the blower?

[@SUROBLEDEKchannel]

Mantab👍👍o

[@IronOakSawmill]

Been there before. Forgot to reset the taper set, and messed a few up.

[@markgalicic7788]

I think we all did that.

[@bunkhindman3241]

Should be are not removed?

[@markgalicic7788]

yes sir.

[@Rene-fh3eu]

Hi Mark. I am not questioning your carpenter skills, you are competent. By cons, for sawing logs, you do not do it properly. You put your ball wrong and you waste a lot. Use your turner in the middle of the ball, it will be much better. Above all, place your ball with the banana (the curved part) at the top, you will see the difference. Otherwise, I love your videos, they are great, I enjoy it. well done

[@markgalicic7788]

thanks.

[@fricknjeep]

hi there MERRY CHRISTMAS to all and to all a good everything john

[@markgalicic7788]

thanks John & Merry Christmas.

[@joemc111]

First time on your channel,you know I think I am a youtube junky at about 5 to 6 hours a day. I’d come up there and help you but I’m allergic to that white stuff merry Christmas

[@markgalicic7788]

thanks & Merry Christmas.

[@robintaylor-mockingeemill8223]

have a great holiday .

[@markgalicic7788]

Merry Christmas Robin.

[@davidwatsonii9469]

MERRY CHRISTMAS AND HAVE A HAPPY NEW YEAR, HOPE NEXT YEAR IS GOOD ONE FOR YALL

[@markgalicic7788]

thanks David & Merry Christmas .

[@countryboylogging4980]

How many days a week u run ur saw mill

[@markgalicic7788]

a few days a week this is a part time mill so it does sit a while between uses .

[@countryboylogging4980]

@@markgalicic7788 keep u the great videos watching u makes me want to get back to running sawmills

[@markgalicic7788]

@@countryboylogging4980 thanks.

[@fatal-sf7rh]

What type of spf is that

[@markgalicic7788]

red oak & pin oak

[@money8713]

💪💪💪

[@robertputnam6324]

Would love to see a camera behind the operator and see the hand controls

[@markgalicic7788]

thats funny you said that , we just had someone stop out to see the mill and said you need a camera in the cab behind you.

[@robertputnam6324]

@@markgalicic7788 The hand control are were the magic is

[@markgalicic7788]

@@robertputnam6324 yes sir Robert , I will do a video of the controls one day.

[@allenlaidacker]

Hope everything goes well for you in 2020

[@markgalicic7788]

thanks Allen & Merry Christmas.

[@jeanbaptisteyoumbessie2632]

Bonjour Madame ou Monsieur svp quel est la valeur tendu à Douala au Cameroun avec son installation complète

[@douglasbranham6099]

How do I get my 1965 Alaska plate to you?

[@markgalicic7788]

email me at [e-mail].

[@dicksoprano5310]

Going to be nice

[@markgalicic7788]

yes sir Dick.

[@dave-in-nj9393]

that band saw looks like a Star Wars Imperial Walker.

[@markgalicic7788]

we are from Imperial Dave.

[@melshea2276]

91,511 th!….so close to first!😊

[@kennethtibbitts6641]

MERRY X-MAS TO MARK YOUR FAMILY ND CREW!

[@markgalicic7788]

thanks Kenneth & Merry Christmas.

[@jameshager1255]

❤️👍

[@markgalicic7788]

thanks James.

[@markcook7907]

33³

[@peggyking1466]

.

[@nomerc3608]

No views nor thumbs up

[@markgalicic7788]

I can see them

[@lewiemcneely9143]

@@markgalicic7788 I was late but not gone yet!