just a one log snack video , hope you enjoy! We have a online store at markgalicicchannel.com/
Пікірлер: 136
@user-iv2uc8nf8y2 күн бұрын
kids say this video was a bore not worth watching
@VorlonFrogКүн бұрын
Loving that beautiful straight oak grain. Thanks for sharing, Mark, Eddie, ZZ, and everyone else!!
@ronthacker2112 күн бұрын
Nothing like the grain of an Oak... except for Cherry... and Hickory... and Walnut... and Maple... and......................LOL
@larrybauman74302 күн бұрын
American elm, eastern cedar.
@markgalicic77882 күн бұрын
I like it Ron lol!
@Chr.U.Cas2216Күн бұрын
👍👌👏 I totally agree! 😁😁😁 Best regards, luck and health in particular.
@lewiemcneely9143Күн бұрын
SWEET log but a little short. Happy Weekend and God Bless!
@garyschacht5032Күн бұрын
I watch so many videos on all kinds of stuff but when I just want to relax and honestly enjoy one, I always find myself going back to one of yours. Just a great bunch of guys loving what they do and doing it well, no BS involved! Keep up the great work and videos! Patiently waiting for another Axiom router video, lol!
@gipsysmith33832 күн бұрын
That would make a great table. It looks lovely
@markgalicic77882 күн бұрын
yes for sure.
@Bob619442 күн бұрын
I can’t believe that my birthday log was short. But at 80 I’m a little shorter myself.😊. Nice cabinet wood in there.
@markgalicic77882 күн бұрын
thanks Bob , Happy Birthday!
@davidhuffine508422 сағат бұрын
Just you and eddie . Nice 8ft log . Lumber looked good . Seeya
@paulsimmons9579Күн бұрын
Good looking boards, men.
@fricknjeep2 күн бұрын
hi there nice log . best to all john
@markgalicic77882 күн бұрын
thanks John.
@Chr.U.Cas2216Күн бұрын
👍👌👏 2) That's some really nice wood! Best regards, luck and especially health to all of you.
@byron71652 күн бұрын
"Get off my lawn!"
@larrybauman74302 күн бұрын
Saw logs you always cut 4 inches extra, like 8'4".
@markgalicic77882 күн бұрын
yes we do know that but the tree people don't lol.
@marcchatterson-xq7qt2 күн бұрын
@@larrybauman7430 any amount of trim is good even an inch as long as both ends are cut square Would be great if every log had at least 4 inches cuz chainsaws don’t always cut straight It’s sad to have to trim it back to the next foot cuz there wasn’t any trim left on the log
@miker6482 күн бұрын
Mark, curious how you and Eddie crossed paths and started a sawmill and sawing wood?
@markgalicic77882 күн бұрын
we want to make a video about that.
@cyndikarp33682 күн бұрын
Scarlet Oak is so pretty. I love it.
@PitViper329Күн бұрын
(In the style of Law and Order) At the Bus Motor Mill, logs are not very cooperative and need to be dealt with. The specialized mechanism answering this call is Chewy These are his stories. [DUH DUH!!]
@mckinleygoetz98552 күн бұрын
Thank you so much for sharing your knowledge and experience with all of us.
@markgalicic77882 күн бұрын
thanks McKinley , glad you liked it.
@bradanderson16279 сағат бұрын
They say they can read a tree but NOT A tape measure!
@garyblevins35322 күн бұрын
Somebody needs to teach them youngins how to read a tape measure and tell em an 8' log should be atleast 8'3" in length if not 8'4"!
@markgalicic77882 күн бұрын
yes they do Gary.
@phildo39645Күн бұрын
We always used to cut em 8’6”,10’6” 12’6” etc
@markchidester92332 күн бұрын
That’s some nice looking lumber right there
@markgalicic77882 күн бұрын
it was very nice but short.
@lambeausouth12 күн бұрын
Watching your log snack video and having a snack 😀
@reeleyКүн бұрын
no closed caption / subtitles, darn it, but still a lovely watch, thank you
@daviddiehl-gy2sq2 күн бұрын
Surprised, nobody has designed hydrolicly movable head blocks.
@karencary33122 күн бұрын
Thanks for the video!!! ❤❤❤❤
@markgalicic77882 күн бұрын
thanks Karen.
@DavidPadusnak2 күн бұрын
amazingly got some nice clear boards out of that log. Shorts are fine , booms are good , and any log that gets on your deck is a victim!
@markgalicic77882 күн бұрын
thanks David.
@marcchatterson-xq7qt2 күн бұрын
Beautiful oak lumber today. Fairly fresh log it’s nice sawing that stuff The other day I cut an invasive tree it was called a tree of heaven. Beautiful wood. Almost like elm Took me some research to figure out what it was it got put in our poplar pile cuz the bark was kind of similar
@markgalicic77882 күн бұрын
thanks Marc.
@williamellis89932 күн бұрын
Nice boards, Mark. Was the log pinching behind the blade at the beginning? Bill
@TheMarkBell2 күн бұрын
I like how the carriage has ‘Dang’ printed on it, LOL 😂
@markgalicic77882 күн бұрын
that's funny lol!
@simsapot2 күн бұрын
I’m sure I’m wrong or confused, a couple of videos back, you guys were working to replace or improve the conveyor belt ??? Enjoying your expert milling
@markgalicic77882 күн бұрын
yes that was a few months ago.
@michaelhall5891Күн бұрын
Short logs short videos 😅
@cowshottv58672 күн бұрын
Nice work,men, i really enjoy watching your channel
@markgalicic77882 күн бұрын
thank you.
@barrylangstaff5727Күн бұрын
Good video 🙏👍🏻
@braddobson20602 күн бұрын
That's a metric 8 ft
@markgalicic77882 күн бұрын
I like it lol!
@randydobson18632 күн бұрын
Hi Mark & Eddies & it's is Randy and i like yours video is Cool & Thanks Mark & Eddies & Friends Randy
@markgalicic77882 күн бұрын
thanks Randy.
@Sailor376also2 күн бұрын
Pretty colour, pretty grain.
@markgalicic77882 күн бұрын
yes nice oak.
@user-lf1bt6qm3hКүн бұрын
Thats goergeus Mark, thnx for the video bro
@davidhensley762 күн бұрын
No actual children were insulted in the making of this video. 😊
@robertgreen86952 күн бұрын
May have been a short shit but it gave you some pretty nice looking boards, so whatever the end use they should work just fine. As usual it is nice to see you and Eddie doing what you like to do amid the man glitter or summer snow as I like to call it and to hear the band sing.
@markgalicic77882 күн бұрын
thanks Robert.
@gerardomanuelortiztellado14602 күн бұрын
GOD BLESS YOU HAPPY WEEKEND 🙏
@markgalicic77882 күн бұрын
thanks.
@cjmaslowski11122 күн бұрын
Thanks for the video great job who ever cuts the log they should know what the lengths are and add 4 to 6 inches
@markgalicic77882 күн бұрын
yes they should lol.
@richardbritton52802 күн бұрын
Nice sawing beautiful wood ty guys 👴🏆🏆🙏🏿🙏🏿
@patrickehaynes2 күн бұрын
Still HOT 🔥 here in louisiana, but still watching the Sawdust fly.
@markgalicic77882 күн бұрын
thanks Patrick , we are in the low 80s.
@melshea22762 күн бұрын
Happy Sunday Eve 😊
@markgalicic77882 күн бұрын
thank you.
@alexkirkles50662 күн бұрын
Nine o’clock in the morning and I’m back online short logs makes life easier nice lumber coming off the mill, my internet went down yesterday before I went to the airport , a packing case from America cargo handlers were ok then the customs I had all the paperwork including customs clearance, but this little hitler decided he wanted to inspect it he didn’t have the tools to open it after an hour I got his supervisor I explained it was cleared customs only needed there stamp to say it was leaving the air port , fifteen twenty minutes in cargo handling and two hours in customs to get paperwork stamped,, it’s X-ray in America and X-ray in uk so they know what’s in the case don’t know what they call these people in America but there jobs worth hear , anyway you guys have a nice day
@frickcirclesaw2 күн бұрын
Hope the lumber can get used. Nice looking boards. What changes would you make?
@barryhoneycutt38942 күн бұрын
That was some excellent Oak Lumber from that log - some clear purdy :) when a man cannot measure right to cut a log, maybe he should not be using sharp tools LOL just sayin
@blnfuse2 күн бұрын
so than should we just make it all campfire wood ?
@barryhoneycutt38942 күн бұрын
@@blnfuse No, not all firewood :) Mark said the tree cutters cut the wrong length he needed, it still mad good lumber just short. Is my take.. :)
@marklapierre56292 күн бұрын
A short little log is appropriate for a short little video. ;-)
@WoodworkingTop5352 күн бұрын
thanks you for sharing
@markgalicic77882 күн бұрын
your welcome.
@davidmackenzie54032 күн бұрын
Nice oak lumber furniture grade 👍👍👍👍☕️☕️☕️☕️☕️
@markgalicic77882 күн бұрын
thanks , very nice oak.
@butter262Күн бұрын
Good morning
@sharonromer66062 күн бұрын
I agree with you 👍
@markgalicic77882 күн бұрын
thanks Sharon.
@bryanbest51132 күн бұрын
Any thought of restarting the kiln project?
@markgalicic77882 күн бұрын
yes but not here.
@williamlee8098Күн бұрын
Mark how long is it from time a log is cutt till it’s sawn at the mill just curious
@Ronald-hx6zn2 күн бұрын
Very nice grain
@markgalicic77882 күн бұрын
thanks Ronald.
@MAGAman-uy7wh2 күн бұрын
Did that log come from a regular supplier? Too bad the children can't measure.
@gerardomanuelortiztellado14602 күн бұрын
GREETINGS AND BLESSINGS BIG HUG FROM CHICAGO IL 🌪️🌪️🌪️🌪️🌪️
@markgalicic77882 күн бұрын
Greetings Gerardo.
@Keepithonest72 күн бұрын
Mark, did you have to adjust the laser because of the last wind storm? You mentioned it in a previous video
@markgalicic77882 күн бұрын
yes it's all good now.
@Keepithonest7Күн бұрын
@@markgalicic7788 excellent
@maynardreed40362 күн бұрын
I used cut logs 8foot 6
@markgalicic77882 күн бұрын
I like that!
@matthewb82292 күн бұрын
If you're paying for an 8' log, and not getting an 8' log, that needs to be addressed.
@remmiemax36242 күн бұрын
Mark, buy the Loggers a tape measure and show them how to use it...🙄🙄😉😉Good thing is you faced stupidity and got some good lumber out if it 😎😎👌👌
@HWPcville2 күн бұрын
Can you elaborate on the yellow dial that moves with the log sled? I would assume it's use is to determine what thickness you are sawing but how do you read it? Is it the total inches from the back of the sled to the blade. If you are making a 2x4 is it as simple as advancing from a given number to 2 numbers below? Do you have a switch or lock that is preset that allows you to so quickly to advance the log toward the blade for repeated cuts? If you have a video where this topic is covered, I would appreciate the video #. Thanks!
@marcchatterson-xq7qt2 күн бұрын
All carriages have presets so each pc cut can be the exact same thickness some have more presets than others or u can just like you said advance it 2 inches But very hard to do that twice the exact same. One could be a 16th or 1/8. Less or more than the piece before
@robertwazniak94952 күн бұрын
The dial tells you what you have left after your board and sawkerf come off. It really is only a good guess until you have a flat back on the cant. Yes, he has presets (called setworks) but he adjusts them for the thickness he wants. Some are set to the common thickness (1”, 5/4, 2” ) and stay that way but a couple he sets for the order (like 1/2 inch)
@deksper2 күн бұрын
Mark also uses the dial to determine his selection for his LOTTO DRAW. :)
@markgalicic77882 күн бұрын
@@deksper I like that one lol!
@robertwazniak94952 күн бұрын
@@deksper that explains why he is still working for a living…
@rockykaiser72442 күн бұрын
You need to dust off your gnomes. 😅
@deksper2 күн бұрын
😂
@markgalicic77882 күн бұрын
they do need a bath lol!
@TheVideoSteve2 күн бұрын
The 'Bearded Munchkins' are still watching.... (look to left side of screen) ......
@markgalicic77882 күн бұрын
yes sir lol.
@marcdh112 күн бұрын
How many inches is 5 quarter or 4 quarter?
@mlbabineaux2 күн бұрын
4 quarter is 1-1/8 iinch
@genepage34052 күн бұрын
I think you released this video before.
@KennethPowell-kx3jt2 күн бұрын
I agree
@markgalicic77882 күн бұрын
no sir.
@KennethPowell-kx3jt2 күн бұрын
I apologize, ran my mouth before watching the entire video. 🥴
@davidandrzejewski91272 күн бұрын
Why do you cut those logs.
@markgalicic77882 күн бұрын
because we can lol.
@anthonyhengst29082 күн бұрын
Grandpa wouldn't put up with that. If logs came short he made the cutters take them away and he wasn't always so nice about it. He'd rather have logs an inch or two too long. That being said, this was a pretty nice log some pretty nice lumber if only it was the proper length. Yup Grandpa was agreeing that " take the worst, saw that first" every time.
@bradwbangerter8632 күн бұрын
My dad wouldn't put up with it at all .
@markgalicic77882 күн бұрын
yes Grandpa is right , Hi grandpa!
@alanm34382 күн бұрын
If you did not like the length, you did not have to buy it. Nice boards! Good to see you.
@markgalicic77882 күн бұрын
thanks Alan , we didn't buy it.
@LindsayWilson-vj1wc2 күн бұрын
I'm sure you have cause to complain but I had to laugh because my old boss in a metal work shop checked somethings I was cutting and was unhappy till I showed him his tape was wrong, with a steel ruler.
@davidcooney97312 күн бұрын
Hi Mark. On your last video, you were wearing an Andruw's Lumber T-Shirt. I was Green with Envy !!Where can I buy them ??
@markgalicic77882 күн бұрын
go over to his channel.
@richardwhite37112 күн бұрын
@ 1:45 are the Gnome Bros. on strike ? they seem to have let their area get awful trashy. Not like then to neglect the clean up for safety's sake in their personal space as it is
@dogit18402 күн бұрын
💥💥🛠️💥🛠️🍻🍔
@lawrencetirrell8414Күн бұрын
Hi Mark. " They" didn't measure right? Or. "They" didn't care? Or. Both? I hope the customer didn't mind thier length? Well. Beautiful oak boards Thanks Mark. Say Hi to Ed. 🥰😊😉👍❤️💜🙏🏻🙏🏻🙏🏻🙏🏻
@charlesmiles91152 күн бұрын
😛😛😛😛😛😛❤❤❤❤👍👍👍👍👍👍👍
@MarvUSA2 күн бұрын
I hope you don't have to pay for those "shorts".
@markgalicic77882 күн бұрын
not much.
@jamesochesky4202 күн бұрын
You are slacking again.Mark only 2 videos this week.Come on !
@ChristinaCalhoun2 күн бұрын
There was 3 videos posted this week #576, #577 our Friday eve video and this snack video #578