sawing oak barn flooring # 415

[@space-pop3527]

Something satisfying about watching you saw!

[@markgalicic7788]

glad you like it.

[@andrewriches506]

Good evening from Lincolnshire UK.

[@markgalicic7788]

good evening Andrew.

[@RodCurrin]

Yay, a new video to watch. Greetings from Cape Town, South Africa.

[@davidvandyk466]

Hi Rod 🦶🦶👌👌🙏

[@RodCurrin]

@@davidvandyk466 Hi David I like the foot emoji 😀 My foot is not too good, but I have some really potent painkillers, so it's ok. I must just be careful of getting addicted to them - they're that strong!

[@markgalicic7788]

Greetings Rod.

[@richardbritton5280]

nice oak sawing guys ty

[@bradleysmith1566]

Nice straight log at about 8 minutes. Good to see you getting lots of good boards from it!

[@TheMarkBell]

We don’t want to de-bark, we only want de Boom!

[@markgalicic7788]

yes sir Mark , BOOM!

[@evanjohnson3578]

Really enjoy watching those logs being turned into lumber , great job and great video, thanks.

[@markgalicic7788]

thanks Evan.

[@lewiemcneely9143]

Sir Bus Motor was speaking with Great Authority! Happy weekend U 2 & God Bless

[@markgalicic7788]

yes sir Lewie.

[@johnhughes2113]

Good day to you all enjoy your vids, from 🏴󠁧󠁢󠁷󠁬󠁳󠁿 north wales, Uk

[@markgalicic7788]

thanks John , hello North Wales!

[@mikethompson4336]

I like the part when you videoed the making of the boards at the machine that cut of each side. I would be interested in more of your whole production set up. Clips of your cut offs, what you do with the scraps, live edge pieces, odd shaped pieces etc. Really enjoy that saw spinning. Thanks guys

[@markgalicic7788]

thanks Mike , glad you like our videos.

[@stevengambrell7826]

Eddie sporting that saw doctor t-shirt. I made a visit to Brent to work on my saw this past Tuesday. Great guy.

[@dalehuff5740]

Thanks!

[@markgalicic7788]

thank you Dale!

[@spud1ism]

I got a horrible head cold...so I've been watching your videos all day. I would love to pull that bark off. Love you guys!

[@markgalicic7788]

hope you feel better , I have a bad chest cold now that sucks but it is Friday!

[@johnwellwood46]

that log rolled over chewy and he scared the bark off of him, lol.... i've been watching back videos and i'm back to 295, been very relaxing watching all those past videos

[@markgalicic7788]

thanks John, glad you are enjoying the videos.

[@sawfiler1958]

That oak is such a beautiful wood when cut in large widths.

[@markgalicic7788]

nice to work with too.

[@sawfiler1958]

@@markgalicic7788 yeah, you would think because it's oak that it would be hard cutting.

[@bay9876]

Nice and fine milling. Beautiful wood for flooring boards.

[@markgalicic7788]

thank you.

[@karencary3312]

Love watching you saw!!!

[@markgalicic7788]

thanks Karen.

[@adriancartlidge4018]

Great video Mark and Eddie. Take care.

[@markgalicic7788]

thanks Adrian.

[@jagdishprasadkhaitan4815]

Lovely superb Nice sawing

[@markgalicic7788]

thank you.

[@malewpw]

Debark Mark! :) please keep sharing your video's.

[@markgalicic7788]

we sure will Wes.

[@benjamindejonge3624]

Love the cleaning up on the end

[@markgalicic7788]

glad you liked it.

[@jwardcomo]

Another great video, thanks.

[@markgalicic7788]

thank you.

[@mifsanta]

Watching and enjoying the show guys Happy w/e Keep well you all Tony from Malta 🇲🇹

[@markgalicic7788]

thanks Tony.

[@bobbynewton9247]

Great video Mark and Eddie

[@markgalicic7788]

thanks Bobby.

[@melshea2276]

That’s a fancy debarker you’ve got there!😊👍

[@markgalicic7788]

it works great lol!

[@OldcampRanch]

Another enjoyable video, thank you 👍🏻

[@markgalicic7788]

thank you.

[@evankibbe590]

Good evening everyone 😊😊👍👍👍

[@markgalicic7788]

good evening Evan.

[@markroth9827]

Thank you for your video.

[@markgalicic7788]

your welcome.

[@DavidPadusnak]

keep em comming. good video.

[@markgalicic7788]

thanks David.

[@texaslstar]

Beautiful lumber

[@markgalicic7788]

thanks.

[@DelButch]

Good evening from Southend on Sea UK

[@markgalicic7788]

good evening Derek.

[@alexkirkles5066]

Them boards look nice make a nice floor , one of our neighbors got super machanic in he for got to put a key way back in the pulley after he fitted a bearing and it’s spun on the shaft and stuck , my apprentice is off for another pulley weld the shaft up turn back to size we should have it working early afternoon , so a hundred pound bearing now costs about eight hundred pounds forgot to say it’s a grain cracker ,my apprentice says super machanic learned his trade in the doll factory fitting knickers on pot dolls and he wasn’t that good at it either,, have a nice days guys

[@markgalicic7788]

thanks Alex , that would get hot very fast.

[@johnfahey7215]

Liked the Edger music!

[@markgalicic7788]

thanks John.

[@bluethunder1951]

I love the edger, shame to retire it 🥹

[@markgalicic7788]

It will live on when someone buys it.

[@fricknjeep]

hi there well done john

[@markgalicic7788]

thanks John.

[@jamessimmons-oh5cp]

Good video Bus Motor Productions

[@markgalicic7788]

thanks James.

[@scottsapino1764]

Turdy eight degrees here in Hubbell Michigan and rain. Hurts da joints lol.

[@markgalicic7788]

we are going down to 47 on Monday.

[@frankfromoklahoma2142]

Great music

[@markgalicic7788]

thank you Frank.

[@bryanbest5113]

Just random comment. People who complain that "chewy" ruins lumber. Do a weight calculator...there's aps. I know 16ft, 30" diameter coastal Douglas fir is 3000lbs. Oak is no doubt more. Hand those folks a peevee.

[@markgalicic7788]

they don't have a clue.

[@davidhensley76]

Mark could also ignore the armchair sawyers and saw what his customers pay for. 😊

[@randydobson1863]

hello mark and eddies its randy and i like yours video is cool thanks friends randy and boom boom boom boom boom boom boom boom boom boom boom boom

[@markgalicic7788]

thanks Randy , BOOM!

[@davidvandyk466]

Good evening from Limpopo South Africa. 🕣

[@markgalicic7788]

good evening David.

[@marknunya3035]

Ah-ha who caught the species change at the end of edging 😮 was that maple? Hmmm 🤔. As always good luck and God bless and stay safe out there

[@markgalicic7788]

you did , that was the wood off the 8x8's good eye lol!

[@marknunya3035]

@@markgalicic7788 I paid my attention bill this week so I'm firing on all cylinders 😂😂

[@jerrysorn8521]

this is for Eddie why do you turn boards on the edger and the main mill. 🤟

[@markgalicic7788]

to put the wane up.

[@joemonks3161]

You need to leave the bark on to allow the dogs something to bark at!

[@markgalicic7788]

good one!

[@Chr.U.Cas1622]

👍👌👏 2) Does the blade wobble just a tiny little bit and sound a little different this time? Or is it caused by the spring power of the wood? Best regards luck and especially health to all of you.

[@markgalicic7788]

hard to say but it saws straight and don't heat up all's good.

[@garybessey2184]

At about 4:38 : "Bear with me, here." Mark Galici. (Real meaning: goes out to log and shows that he meant "Bare {log) with me here !" [Removes bark]).

[@markgalicic7788]

I like it lol!

[@mlt6322]

@@markgalicic7788 You were talking about possibly moving the mill somewhere else about a month ago. If you do, you should bury a 100ft section of 8" pvc drain pipe underground about 6-8 ft deep with 2 up tubes, 1 with a 180* elbow facing down to keep water out and a filter, and the other end coming up through the cab floor with a reversible fan. FREE heat in winter and FREE A/C in summer from the Earth. Just a suggestion, Marty from Baltimore,MD

[@anthonyhengst2908]

Cool!! Bonus footage after farther discussion!!! Lucky us!!! That machine at the very end (is that a planing mill?).... What engine runs that?

[@markgalicic7788]

thanks Anthony , it's a edger that runs off a Leroi gas engine.

[@anthonyhengst2908]

@@markgalicic7788 Thanks I believe Waukesha Engine bought Leroi out in the 1950's I believe.

[@Chr.U.Cas1622]

🙌 Not far away from hitting 66.666 subscribers. One should celebrate the festivals as they fall. 😁 ;-)

[@markgalicic7788]

almost there.

[@stevebarnhart2090]

Just spit ballin here, have you considered coating the edger with a rust converter, or similar coating?

[@markgalicic7788]

we were going to rebuild it but Crosby wouldn't call us back so we are going to replace the edger.

[@rickyleb590]

Hey Mark, am I first my friend? 😂

[@firesurfer]

Not quite.

[@markgalicic7788]

you got second place.

[@matthoward923]

Mark a question for you….. what dictates the feed rate of the log to the blade?

[@markgalicic7788]

the width of the face and how hard the wood is.

[@georgebrooks1077]

What is the widest log that you can cut with the blade?

[@marklapierre5629]

Why did you order a new blade? Just to have on hand if you break the one you're using?

[@markgalicic7788]

we need a second 56" saw for back up.

[@DavidMarlett-m7k]

When do expect to get your new edger?

[@michaelbeck3289]

4.25 What happened next if you don't remove the bark and start sawing the timber?

[@evanjohnson3578]

Really enjoy watching you turn logs into lumber, great video and great job ,👍👍

[@markgalicic7788]

it would get stuck in bad places.

[@lloydr.6271]

Where is the laser? Aberteifi , Wales.

[@markgalicic7788]

above the log.

[@remiskarvelis8527]

🤝👍

[@markgalicic7788]

thanks Remis.

[@crosmo1]

Did you say you ordered another Sawmill or Saw blade?

[@markgalicic7788]

we ordered a new 56" sawblade from B.H. Payne.

[@bren-xmotorsports55]

Any updates on the new edger?

[@markgalicic7788]

not yet.

[@garrycrist3323]

Mike do you ever need help on your sawmill? I worked around sawmills all my life, my grandfather had a sawmill, I worked for a Clentence Tiptop in Union Bridge Maryland.

[@glz1]

😉😉

[@markgalicic7788]

thanks.

[@glenlongstreet7]

Is it not supposed to be 86 at the end of April where you live either?

[@markgalicic7788]

it got cold here , down to 47 on Monday.

[@dannyfoshee6239]

mark how did the dogs get their name?they don't have tails to wag and they don't bark.

[@markgalicic7788]

dogs bite into the log and dog it down.

[@williamellis8993]

We know sawing dogs isn't good. Didn't Jeff try it once? It seems that's why we were signing a blade at the PB show. Bill

[@markgalicic7788]

yes Jeffery made that possible LOL!

[@joefish1439]

You should Debark.......Lol

[@markgalicic7788]

it debarked it's self today.

[@robertrdell8898]

There's something wrong with today's video. Quality bites.

[@markgalicic7788]

looks clear to me.

[@jerryking2418]

What space-pop said.

[@markgalicic7788]

thanks Jerry.

[@robertrdell8898]

That or my eyes are messing up today...

[@crosmo1]

Don't you love it when someone is always telling you how to run your mill?

[@markgalicic7788]

some people !

[@johnkeena6681]

Why do you have the TRIP HAZARD sticking out from the roller table. I watched Eddy damn near fall and bust his shit a few times during this video and seen it on others videos as well. Try and explain that to OSHA if someone was to trip and fall into a saw???

[@WhiskeyDale]

Thanks!

[@markgalicic7788]

thank you Whiskey Dale!